Footer at the bottom in ALL browsers

I have been "fighting" quite a while with Dreamweaver (CS4) being a beginner, to make a page that takes the whole monitor whatever the browser and the dimensions of the screen are. The major problem seems to be the footer, that in Safari is visible where it is supposed to be (at the bottom of the page, always visible) while in Internet Explorer but also in Firefox it shifts upwards either at the top or at the middle of the page or far below, stretching the page (and at that point scrolling is inevitable and a funny empty area is produced between the page and its lonely footer...)
The page I am talking about is this:
www.greenb.it/home.html
I can copy the html code of my work, if requested.
I am super-grateful for any help I will get
THANKS - valeria

Done... But how do I have to design the upper elements in the page in order to have the exact location of the footer and no scrolling bar on the right?
You can't do this safely.  You never know what the exact height of the page is going to be because you cannot know how the visitor has configured their browser to display the content.  Guess wrong and your page becomes a mess in a hurry.
Is there a way to make the footer stay THERE even if I reduce or enlarge the page?
Not easily - the problem is that even though the browser viewport might be tall, if the page doesn't have much content, it would end somewhere in the middle of the viewport, and the fixed position's bottom is taken from the bottom of the page, not the bottom of the viewport.  But you can try making the html have a height of 100% and see if that works.
Maybe everything has to be structured in % and not in px, right?
IE6/Mac?  Really?  Forget that browser.  It's a dead duck.
FF?  I'm not seeing that on my Mac.  By the way, your decision to locate your content on the page using absolute positioning is a very poor layout choice.  Try increasing the text size and you'll begin to see the content overflowing the containers for the text.  It's a potential big mess.  Also, you have a frank error in your CSS -
     background-position: 10px top;
-->
<!--
.testo {
     font-family: Arial;
     font-size: 12px;
     line-height: 21px;
You cannot have HTML comments in a CSS file....

Similar Messages

  • Installation of Flash stops after 30% complete, plugins and java are enabled in the browser and all browsers are closed.

    installation of Flash stops after 30% complete, plugins and java are enabled in the browser and all browsers are closed.

    Hi,
    I'm assuming you're machine is OS X (please include this in the future, avoids assumptions).  Are you using anti-virus software, if so, if you stop/exit the anti-virus software, does the installation proceed?
    If not, or if the installation still does not proceed after stopping the anti-virus software, please try the offline installer, posted at the bottom of the Installation problems | Flash Player | Macpage, in the 'Still having problems' section.
    Maria

  • How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc? Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom. All other screen functions work normally.

    How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc?
    Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom.
    All other screen functions work normally.

    Settings/Control Center. There are two options which are pretty self-explanitory...one enables/disables access on the Lock Screen and one enables/disables access within apps/games.

  • How do I have a disclamer at the bottom of all my emails

    How do I have a disclamer at the bottom of all my emails, somthing like
    "Please note: Under Florida law (Fla.Stat. 668.6076 - effec. 07-01-06), e-mail addresses are public records. If you do not want your e-mail address released in response to a public-records request, do not send electronic mail to this entity. Instead, contact this office by phone or in writing"

    In preferences there is only one window that opens, thats accounts, of which I have 3, there in each I have three options, Account Information, Mailbox behavior, and advanced, there is nothing else. Done all u have suggested, there is no signatures.
    How can you not have the other panes in Preferences?
    If you're absolutely sure that the toolbar of the
    Preferences window is not collapsed, then I would
    suggest reinstalling or maybe looking at the Mail
    application in another account.
    BTW- The instructions from Mail Help on how to add a
    signature:
    1.Choose Mail > Preferences and click
    Signatures.
    2. If you have more than one email account, select
    the account you want to create a signature for.
    3.Click the Add button and enter a description
    for the signature.
    Mail creates a default signature for you.
    4. Select any part of the default signature that you
    don’t want to use and enter your own text.
    5. Select “Always match my default message font” or
    use the Format menu to change the font, color, style,
    and alignment of your signature text.
    When you add formatting, your signature becomes rich
    text. You can also drag a picture or a vCard file to
    your signature.
    6. Use the Choose Signature pop-up menu to choose the
    default signature for the account.
    Choose None if you don’t want a signature to appear
    automatically. To have Mail randomly select a
    signature, choose In Random Order. To have Mail
    insert each of your signatures in order, choose In
    Sequential Order. To change the order, drag the
    signatures in the list.
    7. If you want your signatures to appear above the
    quoted text in a reply, select "Place signature above
    quoted text."
    Otherwise, signatures appear below the quoted text.

  • How to add a link at the bottom of all emails as a default

    I would like to have some information at the bottom of all my emails, like a name address and website. how do I set that as a default on all mail that I write?
    thanks in advance

    http://kb.mozillazine.org/Signatures_(Thunderbird)

  • Somehow a random number appeared on the bottom of all my slides on keynote- it is always the same number regardless of the slide number I am- how can I remove it??

    Somehow a random number (white font on black square) appeared on the bottom of all my slides on keynote… it is always the same number regardless of the slide number I am… how can I remove it??

    Sorry!  I hope I didn't waste anybody's time.  I should have looked first for previous posts and I would have seen other people having the same issue and how they solved it.  Problem solved.  Thanks

  • I need the rubber foot at the bottom of my Macbook. It's impossible to find.

    I lost the rubber foot at the bottom of my Macbook. This has been an adventure in trying to get this. I wanted to purchase it online. Not available!! So I chat with Apple, the guy tries really hard to get it for me. Hi finds it in his system but CANNOT mail to me. Not allowed! I go to Apple store, they say I have to make an appointment with the Genius bar. I try to do that online, it won't let me, because it wants to solve through apple support or chat.
    Are they kidding? A rubber foot? I am really frustrated!! Can some one help?

    Neil,
    I was at the Genius Bar for another problem and mentioned the feet falling off the bottom of my MBP. The Genius's answer was that the important thing was to keep dirt from getting inside the case, so I should just take off the bottom cover and put electrical tape over the holes.
    There are a few considerations for this DIY approach. First, I like the bit of stickiness that the feet give the case so it doesn't slide around, so I want something on the outside. Second, some people may not be comfortable taking apart the case and may not even have a properly sized Phillips screwdriver. Third, if you haven't seen the instructions for removing the cover, you may not realize that the screws on the front and sides of the cover go in at an angle. Even though I wanted my new feet to be installed on the outside, I wanted to look around on the inside to see if there were any loose foot parts lying around in there.
    It happens that I have a screwdriver that came with a memory expansion kit, so I used that. If you need to purchase one, it's a size 00.  I laid down a large towel on my work service to keep from scratching the top cover when working on the upside down MBP, and to collect any run-away screws so they wouldn't end up on the floor. I removed the screws and set them on the towel next to the holes they came out of so I would get them beck into the same place they came from when reinstalling. Note that there is one short screw in the back and the rest are longer, at least on my model. That's why it's important to keep track of them.
    With the back off I could see that there was a lot of dust inside the case already, probably mostly from the vent fan pulling it in. I cleaned up using a vacuum cleaner and a soft paintbrush.
    Before starting the job I went to Home Depot and checked out the selection of feet in the area where they have stick-on pads to prevent furniture from scratching floors, etc. I chose 2" wide, thin, adhesive-backed pads that came in a package of 8 for about $2.50. I liked the shape because it thought it would be less likely to peel off than a taller pad, and there was no question that it would completely cover the holes in the case.
    This is a good time to punch out any feet that didn't separate on their own. Next I cleaned the bottom panel with alcohol so the adhesive would be effective and put the pads in place, nearly centered over the original foot holes, but offset enough so as to not cover the screw holes. I firmly pressed the pads into place, being careful not to allow any wrinkles.
    Finally I replaced the panel and secured it with the screws, remembering to angle the screws, except in the rear.
    I week later, I love the result. The pads have just the right stickiness and I think they work better than the originals at keeping the computer from sliding away when I'm actually using it on my lap. I haven't noticed any loss of case cooling either, but I think that may be difficult to tell. The fans haven't been running any more than usual. The pads show no tendency to peel off, at least not yet. Every pick your computer with one hand, between your thumb and forefinger? Well, it's very easy with the larger "feet".
    Hope this helps.
    Jerry

  • I'm on plan mode In Adobe muse, I have my paster page at the bottom and all subsequent pages at the

    I'm on plan mode In Adobe muse, I have my paster page at the bottom and all subsequent pages at the top. I've changed my page dimensions in the master page by altering the height, however, these changes have not been made in the subsequent pages up top. How come?

    Several possible reasons:
    1) Is the master page applied to the pages?
    2) Did you increase or decrease the height of the master? The size of actual pages is the maximum of the size of the applied master page and the size that's required to contain the content that's been laid out on the page.
    3) Has the minimum height of the non-master pages ever been set? If so, it overrides the master page value. To get the normal page to again honor the minimum height set in the master page go to the individual page in the Plan view and use the context menu to select "Reset Page Properties". This will revert all the page properties to match those of the applied master.

  • Footer at the bottom of the page in Smartforms

    Hi All,
    I need to print some Sales data and then a hard coded paragraph at the end of last page of the print out n Smartform.
    Now the problem is:
    1. If I put that paragraph in the footer then it prints as soon as the data ends in main window and not at the bottom of the page. Eg : If the data ends at the 5 line of the second page then the paragraph is printed immediately after that and not at the bottom.
    2. If I put it in another window and give the option only after end of main window then except the last page that space for that window is empty and if I try to overlap main window then even on the last page if the data is till end of that page main window data gets overlapped on the hardcoded paragraph.
    Please help me on the issue.
    Thanks,
    Sameer
    Edited by: sameer_rk022 on Mar 31, 2011 10:04 AM

    Hi,
    Solution: The issue faced after overlapping the main window with footer window can be achieved by creating a folder within the main window and using the events to check whether there is enough space to print the footer.
    Following are the steps.
    Step 1:  Create a Secondary window say “Footer” which would be the footer window. Overlap the main window on the footer window as shown below.   
    The footer window will be behind the main window
    Step 2:  Create a folder within the main window say “Check_Footer”.
    Go to Tab “Events”, select the checkbox “Footer with Height” and give the required height of the footer. Select the checkbox “at End of Table”. Specify the “Minimum height” as required.
    Now, go to “Conditions” tab and select the checkbox “Only before end of main window”.   
    This is basically done to check whether there is enough space to print the footer on that page. The Footer window would then print the output.
    Step 3: Go to the created “Footer” window .Under the Conditions tab, select the checkbox “Only after end of main window”. Create a  text/tamplate/window whatever you want to display at bottom or footer data.
    Step 4: Save & Activate the Smartform and check the output.
    regards
    Rohit

  • Footer at the bottom of every page

    I need to place a footer in every page of an application. The footer can be a jspf or html file.
    What I want is to place the footer after the last item of each page (can be a table, text field, etc).
    I would like it to render correctly both in IE and Firefox.
    I need the JSP code clip so I can place it in every jsp because the project has ~150 jsp's.
    Thanks in advance,
    Ant�nio

    You could use 'Page Fragment Box'. Check the online help for "Page Fragment Box".
    'This component enables you to include a page fragment in a page. A page fragment is a separate, reusable part of a page that can be included in any number of pages. For example, you might want to put a common a visual element like a header graphic in a page fragment and then include it in all the pages in an application......'
    Hope that helps.

  • When i log onto the internet a box come up on the bottom "show all content" how do i stop this

    When i log into windows a message comes up on the bottom of the screen "SHOW ALL CONTENT" how do I stop this message from coming up it is so annoying.
    This question was solved.
    View Solution.

    Hi,
    Close any open Internet Explorer windows.
    Open windows Control Panel, open Internet Options, click the Security tab and click Custom Level.  About half way down, under the heading Miscellaneous, there is an entry for 'Display Mixed Content' - click Enable and then Ok, then click Apply and Ok in the previous window.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Footer at the bottom of the last page only

    I am doing a dynamic form which has drop down rows (click the + button, then a new row will be created, so the user can have as many rows they prefer, then there is a footer with E-signature in it (hopefully the footer can be shown at the last bottom page only) ).
    My issue now: So when I have 2 pages of forms in total, the bottom of the first and second page will both have the footer (Signature). However, if there are 3 pages of form in total: the bottom of the first and third page will both have the footer (Signature), but not the second page.
    What I want: How can I ONLY have the footer (signature) at the bottom of the last page, not on the first page, no matter how many rows and pages the user created  ?
    I can screen shot the form if needed. Please help.
    Many thanks

    Hi,
    Find the total number of pages which is a standard variable and also the current page number which is a standard variable. Using events hide in other pages or make it visible only in last page

  • Displaying the page footer at the bottom most part of the page

    Hi ,
    I am using page footer region inside the jspx page under </af:panelBorder> tag , it is showing my region where the last TAG ends but i want to show the region at the bottom most of my page i.e. i need some vertical white spaces so that the region should shift at the bottom most of the page .
    I am using the footer region in every jspx page , so i have to make changes in the region only so that it can be shown at the bottom most of the browser
    <af:region id="pageFooterTest"
    regionType="test.pageFooter"/>
    My region is :
    <af:panelHorizontal halign="center" id="abc" >
    <af:outputLabel value="#{messageBean.TDN_GEN_BROW_INFO}" styleClass="test12" id="xyz"
    shortDesc="To turn on the Compatibility View in IE 7 or IE8, select Tools menu, and click Compatibility View."/>
    </af:panelHorizontal>
    Please help me to shift the above region to the bottom of the page as I am using Jdev 10.1.3 .
    Edited by: Vipul B on Feb 21, 2010 11:55 PM

    hey bud...
    thank you for the information...
    i tried doing so...but its not working...not throwing any error on the server, nor its displaying the image........
    jsp code = <img src="ImgServ?fn=/home/chintan/logo.gif">
    web.xml =
    <servlet>
    <servlet-name>ImageServlet</servlet-name>
    <servlet-class>ImageServlet</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>ImageServlet</servlet-name>
    <url-pattern>/ImgServ</url-pattern>
    </servlet-mapping>
    servlet code :
    public void doGet(HttpServletRequest req, HttpServletResponse res) throws I
    OException, ServletException {
    String fileName = req.getParameter("fn");
    res.setContentType("image/gif");
    can u tell me what it can be....? and Hopefully i can call a gif / jpg file for the src in image tag right?
    Thank you for your time bud....my doubts can be silly please bear with me...
    regards,
    chintan

  • Footer at the bottom of the last page

    Hello,
    My template BI / Publisher is a page, but when it is executed it may be several pages. I want the footer that appears on the last page, that it's ok, but, and at the bottom of the last page.
    Have you any idea?
    Thanks.

    With the tag :
    Avant le truc.
    +<?start@last-page-first:body?> <?end body?>+
    Après le truc.
    I have the error :
    Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
    Run XDO Start
    RTFProcessor setLocale: en-us
    FOProcessor setData: D:\Documents and Settings\bPitault\Bureau\Reporting\SWM_SPE_OM_106\DATA_INT_20080922.xml
    FOProcessor setLocale: en-us
    java.lang.NullPointerException
    +     at oracle.apps.xdo.template.fo.area.PageNumber.formatString(PageNumber.java:104)+
    +     at oracle.apps.xdo.template.fo.IDManager.registerId(IDManager.java:44)+
    +     at oracle.apps.xdo.template.fo.area.AreaTree.registerLastPageJoinSeq(AreaTree.java:1106)+
    +     at oracle.apps.xdo.template.fo.area.AreaTree.incrementJoinSequenceIndex(AreaTree.java:219)+
    +     at oracle.apps.xdo.template.fo.area.AreaTree.registerLastPageDocument(AreaTree.java:1089)+
    +     at oracle.apps.xdo.template.fo.area.AreaTree.forceOutput(AreaTree.java:471)+
    +     at oracle.apps.xdo.template.fo.elements.FORoot.end(FORoot.java:58)+
    +     at oracle.apps.xdo.template.fo.FOHandler.endElement(FOHandler.java:386)+
    +     at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)+
    +     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)+
    +     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)+
    +     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)+
    +     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)+
    +     at oracle.apps.xdo.template.fo.FOProcessingEngine.process(FOProcessingEngine.java:279)+
    +     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:1022)+
    +     at RTF2PDF.runRTFto(RTF2PDF.java:626)+
    +     at RTF2PDF.runXDO(RTF2PDF.java:460)+
    +     at RTF2PDF.main(RTF2PDF.java:251)+

  • Where is the"I agree" check for iTunes at the bottom of all the legalese?

    Where is the "I agree" for agreeing to all the legalese at the bottom of the ITune agreement page?

    Did you swipe to the bottom right corner?

Maybe you are looking for