Footer rising up on page w/.dwt file

Hello all, I've been having a problem with the footer location when using the templates. I have been working on a site, built a model page which seemed to work well, and then saved it as a template. Header, footer, left sidebar, main content area. On the template, only the main content area was editable. Some of the pages on the site have a *lot* of text (that won’t change). I tried to make one of those using the .dwt file I’d made, and the footer winds up high on the page, cutting across the content area. It lines up right by the bottom of the sidebar.
Call me old-fashioned, but I’d like to have the footer stay at the bottom of the page, below all of the text (off screen when appropriate).
When I copy the code from the model page I created (instead of using the template), I don’t have this problem.
The model page is on-line at http://www.h-france.net/indexNEW.html
You can see the problem I'm having at http://www.h-france.net/reviewfromtemplateattempt.html
Thanks in advance for any help/advice.
-Charles
(p.s. please ignore my screen name. Adobe had rejected so many that I began to think that the system wasn't processing any and just started hitting letters to see what happened).

A clear float is exactly that. The float you want to clear is the #ContentWrapper, so if you add/modify the style rule for same as in
#ContentWrapper {
float: left;
all is well

Similar Messages

Problem on editing template   .dwt file

I have a problem with dreamweaver template.
When I edit a template in dreamweaver, and apply changes to all the pages , it propogates on all pages and .dwt file also ,
but all the design or layout or graphics of the pages are gone and everything gets messed up.
Why it happens when I am editing a tamplate ?

The problem is your link to CSS file. Template is incorrectly pointing to files on your local hard drive.
     <link rel="stylesheet" href="file:///C|/wamp/www/mm_health_nutr.css" type="text/css" />
The link must point to your site folder like this:
     <link rel="stylesheet" href="../mm_health_nutr.css" type="text/css" />
Edit template. Save & populate changes to your child pages.
Nancy O.

Problem updating pages that use .dwt file

So i have 45 files that all use the same .dwt file. Usually when I make a change to the template and go file > save it asks me if i want to update all pages that use that specific .dwf file. For some reason it doesn't show the pages that do. Although if I go to the specific page for example contact.html and do a Modify > Templates > Apply template to page, it applys the changes, and then once i make a change to the .dwt file and do the File > Save, contact.html now appears in the section of files to be updated. I do not want to go thru every page and manually apply the template does anyone have any information that could help me out? thanks
G8ofH8

I do not want to go thru every page and manually apply the template does anyone have any information that could help me out?
However, that would work.
It sounds like your site cache has become corrupted. Try the following -
1. Open DW's Site manager, select the site name, and click on EXPORT (make sure you opt to export the FULL site defintion including FTP info)
2. Export the site definition to a KNOWN location on your hard drive
3. With the site name still selected in Site manager, click REMOVE to remove that site from your list of definitions
4. Import the site definition you just exported - that should solve the updating problem
Does this heal things for you?

Error message "Page header or footer longer than a page"

Hi
Our application call crystal report to generate/display crystal report in PDF format. We have a dev system to test this, all looking good, however when we moved to production server, the attached error message is displayed when running crystal report.
Invoking method GENERATEREPORT returned error Page Header plus Page Footer is too large for the page.
Error in File C:\DOCUME~1\SERV
IC1.LIM\LOCALS1\Temp\temp coq new xxxx.rpt:
Page header or footer longer than a page.
Same report doesnu2019t get this error message if running it from crystal report developer.
Not all crystal reports got this error, but some of reports display strange view in PDF, the content of report are reduced in a paper size like label size, not A4 size. I have checked the default printer on the server, it points to a normal window printer, not a label printer. I have checked all possible settings on production server and compared with dev server, all looks same to me
I suspect the label printing size is used somehow when the report is previewed in pdf format, not normal A4 size although I have selected a normal window printer as a default printer on the window,what else should i check?
Could you please shed some light on this?
Thanks!
Li

I found the issue is from label printer that is setup on the production server. After I removed the label printer from the server, then error message is gone, all report running fine.
This label printer is not the default window printer, it is a network printer but is configured as a printer using local port on the server.
I think for some reasons, crystal report alway picks up the label printer page size, not the normla page size, I am not sure why and how crystal report do this, it should pick up the default printer, which is a normal printer.
There is no error when I run report within CR. The error happens only when I try to generate crystal report from our application.
I do have logo in page header/footer, subreports in report footer, but I don't think they cause the problem, because I can run same report without any problem in dev system.
Any idea what I should check next?
Thanks

Help needed with DWT file

Please can you help, made initial template for my website but now I want to change template so I can edit meta tags (tags were originally an unetitable area).
When I apply my example below in the DWT file and apply to all pages the meta tags disappear.
Please can you help.
Currently have..
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="keywords" content="keywords are here" />
<meta name="description" content="description is here" />

<title>Title</title>

<link href="../css-file/css.css" rel="stylesheet" type="text/css" />

</head>
And tried this but meta tags in pages disppear..
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<link href="../css-file/css.css" rel="stylesheet" type="text/css" />

<title>Title</title>
<meta name="keywords" content="keywords are here" />
<meta name="description" content="description is here" />


</head>
As always, thanks in advance.

I've placed another example below, would this be correct.
Move the charset <meta> tag and link to the style sheet below the title like this:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>

<title>Title</title>

<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<link href="../css-file/css.css" rel="stylesheet" type="text/css" />

</head>
When you say don't put anything in the head of the document do you also mean taking out the title and reference to the external css file.
No, I was responding directly to your question about the keywords and description. It's perfectly OK to put other things in the non-editable part of the <head>. But anything that you want to be able to change in child pages should be added directly to the child page. That's why Dreamweaver creates the second editable region called "head". By default, it's empty; but it's where you add things like keywords, extra style sheets, and JavaScript to individual child pages.

.HTML and .DWT files in folders have 0kb size

Hey guys,
I was just setting up a new client on the system and I have an issue with uploading HTML and DWT files through Dreamweaver. The files end up on the server but each is a 0kb file. Here are my steps:
In Partner Portal I created a new site
I chose to start with a blank slate/template
I logged in via Dreamweaver CS5's BC Extension as I normally do and set the local directory of the project
I was moving a static HTML site over to this site so the design and files were done already. So once the project was setup in DW I selected all the files in the project folder and uploaded them to the remote site via the Files panel in DW.
The upload completed and did not note any errors or problems.
I logged into the BC Admin and went to update some URLs of the pages and I noticed the first .html file in a folder had 0kb.
I noticed that this problem only occurred in files that are uploaded to a folder. IE- I had a folder called "contact" and a file index.html inside. I uploaded this folder and the rest via the Files panel in DW. I DID NOT create the folders through BC first. The same thing happens with .DWT files too. Although, in this case, since I had a "Templates" directory locally and I'm assuming one was created by BC on the remote host when I created the account it's probably not having to do with users creating folders through FTP/Files panel in DW.
The .html files in the root of the site are fine. All my JS and CSS files in their folders are also fine. It just seems to be .HTML and .DWT files in folders that have 0kb.
Has anyone seen this?
I have to get this site live in a rush tomorrow so I'm either going to delete the folders via FTP and create all the pages/folder first in BC and copy and paste the code over from DW to BC Admin area manually. I'm not excited about doing that as it will add hours onto this site when moving a static site over should be pretty quick. Now I have to create all the pages and templates manually.

I can now confirm that the problem is related to DW or the DW FTP login session. I used WinSCP to FTP my files up and they went up fine.

Missing .dwt File

This is the first time I have ever posted without searching first, but beg readers to understand I am working a little bit of a deadline here.
Trying to finish up a site begun by a departing developer who built primarily in dreamweaver (i build primarily in vs or textpad...)...
Finding multiple files where the body is built ontop of a template .dwt file; but the original .dwt file is missing.
For example, .asp file carries line...

...but review of the directory [Templates] finds nothing named [FileName.dwt]...
Have learned how to detach these files from the missing template but 2 questions...
1. Why isn't Dreamweaver 8 catching this missing template "relationship" and marking the code in error or otherwise indicating this to the developer?
<and/or>
2. If Q1 "off-point" what might I be not yet understanding about these .asp / .dwt "relationships" that would explain this scenario?
...at this point seems a bug in DW8 to create a relationship, eliminate 1/2 of that relationship but not error or notifiy developer or user...
Has anyone else encountered this?
Thanks in advance for all input!!!

David:
Thanks for the reply, and I take your point.
Not to be argumentative, but...
If I understand the "model" I would
1st:Create the Template with the intention of applying a "consistent-format" across several pages.
2nd:Create the subsequent pages applying the template to each...
Isn't the intention further to enable the developer to be able to apply future changes to the original template so they propogate thru the site?
I would interpret that as a 2-way (not a 1-way) relationship and expect that any change to any part of the relationship would be in some way communicated to the developer.
Admittedly, after some greater expereince now w/Dreameweaver your point of reproducing the template from one of the existing "children" is an easy solution...
I just thought I'd take one more stab at highlighting what seems "intuitive" to this relationship (imo).
Thanks again for the response and the patience with this "counter-point."

Avoid printing Header and Footer in the last page

Hi,
Could anyone please let me know how to avoid print the header and footer in the last page?
Note: I'm printing RTF template for publishing the output.
Looking forward for your valuable inputs/suggestions.
Thanks in advance,
Regards,
Muru

Hai,
My report got FROM PO & TO PO parameters and i need to print footer only in first page of each PO. Tried with section but now i am getting first page of all PO contionious and then all lines together.
Please call me or sent replies to [email protected]

Scanning multiple pages into one file using MAC

How do I scan multiple pages and save them into one file or document using a MacBook Pro laptop? My printer is an HP Photosmart 7520. When I use this printer and scan from my PC, it does allow me to scan multiple copies and save as one document by just adding pages as I scan. When I scan with my MacBook Pro, it scans each page, however, I don't get any option or choice to save as one document. It automatically saves each page as a separate document.

Try scanning from your Mac. Use Image Capture app in your Applications folder.
Click once on the scanner on the left side, then click on Show Details along the bottom. Along the right side you will see LOTS of options for scanning and saving.
One of those is Format, make the Format PDF. Just below that will be a check box allowing you to scan multiple pages to one file.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Scanning multiple pages to one file

I have a C310a All in One printer/scanner. My computer uses OS X 10.9 and all the drivers are updated. Is there a way to scan multiple pages to one file. I have tried the three methods mentioned in the HP bulletin for Mavericks but I can only scan one page to one file extension.

Welcome to the forums @BPGeneva ,
I understand you are looking to do a multiple page scan and save it as one file. I will do my best to help! The full driver for the C310a is not available with Mavericks. In having said that, you can try using Image Capture to scan multi-page documents.
Click this link and have a look at PrintDoc's suggestion: Re: Scanning multiple pages into one file using MAC
I hope that helps
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Scanning multiple pages to single file

I have the HP Officejet Pro 8600. I use to be able to scan multiple pages to one file. For some reason now it separates the pages into single files. Under advanced settings it looks like the option "create a separate file for each scanned page" is checked, however, it is not highlighted so I can't change it or uncheck it.

KB-Sales,
Welcome to the HP Forum.
Assuming a recent Windows Operating System and that you install the Full Feature Software (printer software), then you may use the Printer Assistant shortcut to access Scan Document or Photo.
From there, you may be able to use / create a Scan Template to combine files to output to a final, single file.
The following Dragon Document may help:
Scan_Multiple_Documents-Combine
Note the hint about creating your own Shortcut / Template in the instructions.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Spool List more than 99 pages to PDF File to Mail

Hi All,
I want to convert a big spool list (342 Pages) to PDF file to send it by e-mail.
I use the following code to convert my spool to PDF file:
Convert to PDF file*
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid              = w_spool_id
      no_dialog                = 'X'
      dst_device               = c_device
    IMPORTING
      pdf_bytecount            = gd_bytecount
    TABLES
      pdf                      = it_pdf_output
    EXCEPTIONS
      err_no_abap_spooljob     = 1
      err_no_spooljob          = 2
      err_no_permission        = 3
      err_conv_not_possible    = 4
      err_bad_destdevice       = 5
      user_cancelled           = 6
      err_spoolerror           = 7
      err_temseerror           = 8
      err_btcjob_open_failed   = 9
      err_btcjob_submit_failed = 10
      err_btcjob_close_failed = 11
      OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings*
LOOP AT it_pdf_output.
    TRANSLATE   it_pdf_output           USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
The problem with the FM 'CONVERT_ABAPSPOOLJOB_2_PDF' is when my spool have more than 99 pages. In this case, the FM generate a backscreen job (sm37) to convert my spool and generate a binary PDF spool.
After this step, the 'FM SO_DOCUMENT_SEND_API1' send an e-mail with the binary PDF File recovered in the spool list but i can't open the file with Adobe Reader because the format is wrong.
Someone knows how could i convert my big spool list to PDF file to send it by e-mail adress ?
Thanks a lot for your precious help that i need so much !

Generate big spool list
REPORT ZGEN_SPOOL.
tYPE-POOLS: slis.
TYPES: BEGIN OF str_mara,
matnr TYPE mara-matnr,
ersda TYPE mara-ersda,
ernam TYPE mara-ernam,
laeda TYPE mara-laeda,
aenam TYPE mara-aenam,
vpsta TYPE mara-vpsta,
END OF str_mara.
DATA: i_mat TYPE TABLE OF str_mara,
wa_mat LIKE LINE OF i_mat.
DATA:params LIKE pri_params.
DATA: days(1) TYPE n VALUE 2,
valid TYPE c.
DATA: obj TYPE REF TO cl_salv_table.
SELECT matnr
ersda
ernam
laeda
aenam
vpsta
UP TO 4999 ROWS
FROM mara INTO CORRESPONDING FIELDS OF TABLE i_mat.
TRY.
CALL METHOD cl_salv_table=>factory
IMPORTING
r_salv_table = obj
CHANGING
t_table = i_mat.
CATCH cx_salv_msg .
ENDTRY.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
* destination = 'QAS'
list_name = 'ZTEST_VERTEX'
list_text = 'TEST'
no_dialog = 'X'
immediately = ' '
expiration = days
IMPORTING
* OUT_ARCHIVE_PARAMETERS =
out_parameters = params
valid = valid
* VALID_FOR_SPOOL_CREATION =
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4
IF sy-subrc ne 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY .
NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
CATCH cx_sy_nested_print_on .
ENDTRY.
CALL METHOD obj->display.
NEW-PAGE PRINT OFF.

Scaning multiple pages into one file on a 4630

Using HP 4630 printer, windows 8.1, wireless connection.
Want to scan multiple pages into one file.
Per user manual, I work from the computer not the printer.
When first page is scanned am asked if I want to save, I click yes and name file.
When I scan second page am again asked if I want to save, my file name appears, I am told it already exists and asks if I want to keep or replace it.
Whichever one I click, only the second page is saved.
What am I doing wrong?
Question: How do I scan mutiple pages into a single document?
This question was solved.
View Solution.

I accept this solution with many thanks! It was so obvious and I didn't see it. The User Manual should mention this.

How can I scan multiple pages to one file with MG 7120

My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?

Hi albabynyr,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single file. To scan using the IJ Scan Utility, please follow these steps:
1. Start IJ Scan Utility by going to your Start menu, then selecting All Programs, then Canon Utilities, then IJ Scan Utility (folder), then IJ Scan Utility (program).
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
3. Click the DOCUMENT SCAN option on the left pane of the window.
4. In the right pane of the window, locate the SELECT SOURCE field and select the DOCUMENT option.
5. Set the color mode, document size, and scanning resolution as required in the rest of the fields shown in the window. Click DOCUMENT SCAN ORIENTATION SETTINGS... to specify the orientation of the documents to be scanned.
6. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. After a page has scanned, the screen to continue or end scanning appears. If you have more pages to scan, place the next page on the platen and click Scan. Do this each time a page has completed scanning. After the last page has been scanned, click Exit. Scanned images are saved in previously selected folder location specified in the SETTINGS... window. Click the CANCEL button to cancel scanning if needed during scanning.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Need to remove the header and footer regions on one page

Hi,
I have a requirement to remove the header and footer regions on one page only. The regions I'm referring to contain the following:
Header:
Company logo, Home link, Logout link, Preferences link
Footer:
Copyright info, Privacy Statement, Home link, Logout link, Preferences link
These are the standard Oracle header and footer regions/page items, so I am not specifying a particular page name, although it would be the create time cards page we want to modify.
Also, we only want to remove these regions/items from ONE page, not an entire responsibility.
Any help is greatly appreciated.
Thanks!
Suzanne

Hi,
In order to hide,
Home link, Logout link, Preferences link
Use this code in the processrequest of the controller on the page on which you want tohide these
OAPageLayoutBean page = pageContext.getPageLayoutBean();
page.prepareForRendering(pageContext);
page.setGlobalButtons((oracle.cabo.ui.UINode)null);
And for hiding the Copyright info, Privacy Statement:
Click on Personalise page link
then Click on Choose Context
Choose "OAFooter" as Scope
and click "Apply"
and then Personalise the Copyright and Privay Statememnt icon and set rendered as False.
Thanks,
Gaurav
Edited by: Gauravv on Aug 25, 2009 8:36 PM

Footer rising up on page w/.dwt file

Similar Messages

Maybe you are looking for