For All Entries in i_tab

Hi Abapers,
I am facing a problem while fetching the data from the database through 'FOR ALL ENTRIES IN '.
Problem is actually there are 207 records in my database table But when I use 'FOR ALL ENTRIES IN I_TAB' I am getting only 179 records.
Can anybody tell me why it is not fetching all 207 records.
Here below is the sample code:
IF NOT IT_AFKO[] IS INITIAL.
    SELECT RSNUM
           MATNR
           BDMNG
           ENMNG
     INTO TABLE IT_RESB
     FROM RESB
     FOR ALL ENTRIES IN IT_AFKO
     WHERE RSNUM = IT_AFKO-RSNUM
       AND RSPOS GE '0001'
       AND RSART = ''
       AND XLOEK <> 'X'
       AND POSTP = 'L'
       AND DUMPS <> 'X'.
ENDIF.
Please guide me if I am missing something

In Such Cases :
First thing to be checked is :
If all the Primary Key has been included in the select otherwise,
For all Entries will delete the duplicate entries from the table .
Hope this helps .
Praveen

Similar Messages

Unable to Get the Data Using For All Entries

Hi everybody, i am using for all entries in a program. but when i am writing a code using for all entries i am getting an error as
Where condition does not refers to the FOR ALL ENTRIES tables...
SELECT KUNNR
       NAME1
       ORT01
       LAND1
   FROM KNA1 INTO TABLE ITAB1 WHERE KUNNR IN S_KUNNR.
IF NOT ITAB1 IS INITIAL.
SELECT VBELN
        ERDAT
        KUNNR
   FROM VBAK INTO TABLE ITAB2 FOR ALL ENTRIES IN ITAB1 WHERE KUNNR = IT_KNA1-KUNNR.
ENDIF.
can anybody help out in this
regards
hyder ali

The correct one may be like this:
SELECT KUNNR
NAME1
ORT01
LAND1
FROM KNA1 INTO TABLE ITAB1 WHERE KUNNR IN S_KUNNR.
IF NOT ITAB1 IS INITIAL.
SELECT VBELN
ERDAT
KUNNR
FROM VBAK INTO TABLE ITAB2 FOR ALL ENTRIES IN ITAB1 WHERE KUNNR = ITAB1-KUNNR. "modified here
ENDIF.
Edited by: XuJian84 on Mar 9, 2010 4:25 AM

What is the usage of for all entries ?

What is the Usage of read table after using for all entries ?
In the following example what exactly it is doing ?
Usage of 'for all entries' in Select Statement
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
DATA: BEGIN OF T_VBAP OCCURS 0,
        VBELN LIKE VBAP-VBELN,
        MATNR LIKE VBAP-MATNR,
        POSNR LIKE VBAP-POSNR,
        END OF T_VBAP.
DATA: BEGIN OF T_VBFA OCCURS 0,
        VBELV LIKE VBFA-VBELV,
        VBELN LIKE VBFA-VBELN,
        VBTYP_N LIKE VBFA-VBTYP_N,
        END OF T_VBFA.
DATA: BEGIN OF T_VBAK OCCURS 0,
        VBELN LIKE VBAK-VBELN,
        IHREZ LIKE VBAK-IHREZ,
        END OF T_VBAK.
DATA: BEGIN OF T_KNA1 OCCURS 0,
        KUNNR LIKE KNA1-KUNNR,
        NAME1 LIKE KNA1-NAME1,
        END OF T_KNA1.
   DATA: BEGIN OF T_MAKT OCCURS 0,
        MATNR LIKE MAKT-MATNR,
        MAKTX LIKE MAKT-MAKTX,
        END OF T_MAKT.
SELECT likpvbeln likplifex likpbldat likpwadat likpwadat_ist likpkodat likp~lfart
         likpkunnr likpvstel lipsposnv lipslfimg lipsvrkme lipslgmng lips~meins
         lipswerks lipslgort lipscharg lipsvbelv lipsposnr lipsmatnr
         lipsvbeln LIPSVGBEL LIPSVGPOS vbupkosta vbupwbsta vbupposnr vbup~vbeln
          VBAKIHREZ VBAKVBELN VBAP~VBELN
     INTO CORRESPONDING FIELDS OF TABLE it_itab
    FROM ( likp
           INNER JOIN lips
           ON lipsvbeln = likpvbeln
           INNER JOIN vbup
           ON vbupposnr = lipsposnr
           and VBUPVBELN = LIPSVBELN )
          left outer join VBAK
          on VBAKVBELN = LIPSVGBEL
          inner join VBAP
          on VBAPVBELN = VBAKVBELN )
         WHERE likp~vbeln IN so_vbeln
           AND likp~lifex IN so_lifex
           AND likp~lfart IN so_lfart
           AND likp~kunnr IN so_kunnr
           AND likp~vstel IN so_vstel
           AND likp~bldat IN so_bldat
           AND likp~wadat_ist IN so_wadat
           AND vbup~kosta IN so_kosta
           AND vbup~wbsta IN so_wbsta
           AND LIPS~LFIMG NE 0.
SELECT VBELN IHREZ INTO TABLE T_VBAK
FROM VBAK
FOR ALL ENTRIES IN IT_ITAB
WHERE VBELN = IT_ITAB-VGBEL.
APPEND T_VBAK.
ENDSELECT.
SELECT VBELN MATNR POSNR INTO TABLE T_VBAP
FROM VBAP
FOR ALL ENTRIES IN IT_ITAB
WHERE VBELN = IT_ITAB-VGBEL AND
        MATNR = IT_ITAB-MATNR AND
        POSNR = IT_ITAB-VGPOS.
APPEND T_VBAP.
ENDSELECT.
SELECT VBELV VBELN VBTYP_N INTO TABLE T_VBFA
FROM VBFA
FOR ALL ENTRIES IN IT_ITAB
WHERE VBELV = IT_ITAB-VBELN AND
        VBTYP_N = 'M' .
SELECT KUNNR NAME1 INTO TABLE T_KNA1
FROM KNA1
FOR ALL ENTRIES IN IT_ITAB
WHERE KUNNR = IT_ITAB-KUNNR.
APPEND T_KNA1.
ENDSELECT.
SELECT MATNR MAKTX INTO TABLE T_MAKT
FROM MAKT
FOR ALL ENTRIES IN IT_ITAB
WHERE MATNR = IT_ITAB-MATNR.
APPEND T_MAKT.
ENDSELECT.
*Populate field with color attributes
LOOP AT it_itab INTO wa_ITAB.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
i.e. wa_ekko-line_color = 'C410'
    REFRESH color.
    colourize 'VBELN' 0. " .
    WA_ITAB-farbe = color[].
    ld_color = ld_color + 1.
Only 7 colours so need to reset color value
    IF ld_color = 3. "8
      ld_color = 1.
    ENDIF.
    CONCATENATE 'C' ld_color '10' INTO wa_ITAB-line_color.
    WA_ITAB-NAME1 = ''.
    WA_ITAB-MAKTX = ''.
    WA_ITAB-IHREZ = ''.
    WA_ITAB-VBELV = ''.
    READ TABLE T_KNA1 WITH KEY KUNNR = WA_ITAB-KUNNR.
    IF SY-SUBRC = 0.
       WA_ITAB-NAME1 = T_KNA1-NAME1.
    ENDIF.
    READ TABLE T_MAKT WITH KEY MATNR = WA_ITAB-MATNR.
    IF SY-SUBRC = 0.
    WA_ITAB-MAKTX = T_MAKT-MAKTX.
    ENDIF.
    READ TABLE T_VBAK WITH KEY VBELN = WA_ITAB-VGBEL.
    IF SY-SUBRC = 0.
    WA_ITAB-IHREZ = T_VBAK-IHREZ.
    ENDIF.
    READ TABLE T_VBFA WITH KEY VBELV = WA_ITAB-VBELN.
    IF SY-SUBRC = 0.
    WA_ITAB-VBELVA = T_VBFA-VBELN.
    ENDIF.
   READ TABLE T_VBAP WITH KEY VBELN = WA_ITAB-VGBEL
                              POSNR = WA_ITAB-VGPOS
                              MATNR = WA_ITAB-MATNR.
   IF SY-SUBRC = 0.
   WA_ITAB-IHREZ = T_VBAK-IHREZ.
   ENDIF.
wa_ekko-line_color = 'C410'.
    MODIFY it_itab FROM wa_itab.
ENDLOOP.
ENDFORM. " data_retrieval

hi Jyotirmoy,
The explanation below can give u an idea of wat is going in ur code..
Use of FOR ALL Entries
Outer join can be created using this addition to the where clause in a select statement. It speeds up the performance tremendously, but the cons of using this variation are listed below
Duplicates are automatically removed from the resulting data set. Hence care should be taken that the unique key of the detail line items should be given in the select statement.
If the table on which the For All Entries IN clause is based is empty, all rows are selected into the destination table. Hence it is advisable to check before-hand that the first table is not empty.
If the table on which the For All Entries IN clause is based is very large, the performance will go down instead of improving. Hence attempt should be made to keep the table size to a moderate level.
Not Recommended
            Loop at int_cntry.
             Select single * from zfligh into int_fligh
             where cntry = int_cntry-cntry.
             Append int_fligh.
            Endloop.
Recommended
            Select * from zfligh appending table int_fligh
            For all entries in int_cntry
            Where cntry = int_cntry-cntry.
Thankyou,
Regards.

Using delete and FOR ALL ENTRIES

Hi,
We have a error message regarding the following code :
Delete FROM TABLE FOR ALL ENTRIES IN lt_TABLE WHERE
TABLE_KEY1 = LT_TABLE_KEY1
Could we use the For All entries with "Select" ?
For information, the error message is "Unable to interpret "FOR". Possible causes: Incorrect spelling or comma error.
Thank you.

Hi,
Check the below syntax, if you want to delete from database
DELETE FROM sflight
WHERE carrid = p_carrid AND
fldate = sy-datum AND
seatsocc = 0.
Just a suggestion. May be from next time you can use F1 help for syntax:
1. Place the cursor on the delete keword in your program and press F1 - You willl get all the possible syntax for delete statement
2. Else open the transaction ABAPDOCU, Click Keyword Help, Enter the required keyword(delete in this case) and press cont.. You will get the syntax.
Hope thsi will help you.
Regards,
Swarna Munukoti.

Performance Issue in Select Statement (For All Entries)

Hello,
I have a report where i have two select statement
First Select Statement:
Select A B C P Q R
     from T1 into Table it_t1
          where ....
Internal Table it_t1 is populated with 359801 entries through this select statement.
Second Select Statement:
Select A B C X Y Z
     from T2 in it_t2 For All Entries in it_t1
          where A eq it_t1-A
             and B eq it_t1-B
             and C eq it_t1-C
Now Table T2 contains more than 10 lac records and at the end of select statement it_t2 is populated with 844003 but it takes a lot of time (15 -20 min) to execute second select statement.
Can this code be optimized?
Also i have created respective indexes on table T1 and T2 for the fields in Where Condition.
Regards,

If you have completed all the steps mentioned by others, in the above thread, and still you are facing issues then,.....
Use a Select within Select.
First Select Statement:
Select A B C P Q R package size 5000
     from T1 into Table it_t1
          where ....
Second Select Statement:
Select A B C X Y Z
     from T2 in it_t2 For All Entries in it_t1
          where A eq it_t1-A
             and B eq it_t1-B
             and C eq it_t1-C
do processing........
endselect
This way, while using for all entries on T2, your it_t1, will have limited number of entries and thus the 2nd select will be faster.
Thanks,
Juwin

Performance issue with select query and for all entries.

hi,
i have a report to be performance tuned.
the database table has around 20 million entries and 25 fields.
so, the report fetches the distinct values of two fields using one select query.
so, the first select query fetches around 150 entries from the table for 2 fields.
then it applies some logic and eliminates some entries and makes entries around 80-90...
and then it again applies the select query on the same table using for all entries applied on the internal table with 80-90 entries...
in short,
it accesses the same database table twice.
so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
is around 80-90 entries too much for using "for all entries"?
the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
i really cant find the way out...
please help.

chinmay kulkarni wrote:Chinmay,
Even though you tried to ask the question with detailed explanation, unfortunately it is still not clear.
It is perfectly fine to access the same database twice. If that is working for you, I don't think there is any need to change the logic. As Rob mentioned, 80 or 8000 records is not a problem in "for all entries" clause.
>
> so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
>
It is not clear what you tried to do here. Did you try to bring all 20 million records into an internal table? That will certainly cause the program to short dump with memory shortage.
> the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
>
That is fine. Actually, it is better (performance wise) to do much of the work in ABAP than writing a complex WHERE clause that might bog down the database.

SD Flow program using For all entries.

using simple ALV grid: I have the urgent requirement of changing the following program using 'For all entries' instead of joins and I should not use 'TABLES' -- For top-of-page I need to get dynamic fields like if I select company code in the selection screen then I need to get 'This report is base on COMPANY CODE'.
This program is about sales flow where i shud get only those records that have ebeln in vbak, delivery, invoice.
The original program is as follows:
*& Report ZSD_DOCU_FLOW                                               *
REPORT zsd_docu_flow NO STANDARD PAGE HEADING                    .
* Program     : ZCOS_SALES                                           *
* Dev. Class : ZSD
* Functional :
* Created on :                                                        *
* Project     :
* CR Number   :
* Transaction : ZSDCSUT                                               *
* Description :   * Sales document life cylce for given customer
*                  to declaired period displaying the sales document
*                  details ,with relevant del details and corresponding
*                  Invocie Details
*-----------     Tables Declaration      -----------*
TABLES: vbak,vbap,vbfa,kna1,vbrk,vbrp,likp,lips,t001.
TYPE-POOLS : slis.
*-----------    Internal Tables Declaration      -----------*
*      Internal Table for Sales Order data                   *
DATA: BEGIN OF it_so OCCURS 0,
        vbeln LIKE vbak-vbeln,
        kunnr LIKE vbak-kunnr,
        posnr LIKE vbap-posnr,
        matnr LIKE vbap-matnr,
        kwmeng LIKE vbap-kwmeng,
        netwr LIKE vbap-netwr,
     END OF it_so.
*      Internal Table for Delivery Order data                   *
DATA: BEGIN OF it_del OCCURS 0,
        delnum LIKE likp-vbeln,
        lfdat LIKE likp-lfdat,
        delitem LIKE lips-posnr,
        lfimg LIKE lips-lfimg,
      END OF it_del.
*      Internal Table for Invoice data                          *
DATA: BEGIN OF it_inv OCCURS 0,
        invnum LIKE vbrk-vbeln,
        invitem LIKE vbrp-posnr,
        fkimg LIKE vbrp-fkimg,
        amount LIKE vbrp-netwr,
     END OF it_inv.
*      Internal Table for Final data                            *
DATA: BEGIN OF it_final OCCURS 0,
        vbeln LIKE vbak-vbeln,
        posnr LIKE vbap-posnr,
        kunnr LIKE vbak-kunnr,
        name LIKE kna1-name1,
        matnr LIKE vbap-matnr,
        kwmeng LIKE vbap-kwmeng,
        netwr LIKE vbap-netwr,
        delnum LIKE likp-vbeln,
        lfdat LIKE likp-lfdat,
        delitem LIKE lips-posnr,
        lfimg LIKE lips-lfimg,
        invnum LIKE vbrk-vbeln,
        invitem LIKE vbrp-posnr,
        fkimg LIKE vbrp-fkimg,
        amount LIKE vbrp-netwr,
     END OF it_final.
*-----------    Variables Declaration      -----------*
DATA: v_name LIKE kna1-kunnr," variable for customer name
      v_delnum LIKE likp-vbeln," variable for delivery number
      v_invnum LIKE vbrk-vbeln." variable for invoce number
DATA : ls_layout TYPE slis_layout_alv,
       it_fcat TYPE slis_t_fieldcat_alv ,
       wa_fcat TYPE slis_fieldcat_alv,
       lh TYPE slis_t_listheader,
       ls TYPE slis_listheader,
       it_events TYPE slis_t_event ,
       ls_event TYPE slis_alv_event ,
       i_sort     TYPE slis_t_sortinfo_alv,
       w_var TYPE i.
DATA : l_date(10).
DATA : l_date1(20).
DATA : l_repid LIKE trdir-name.
l_repid = 'ZSD_DOCU_FLOW1'.
*-----------    Select-options & parameters Declaration ---*
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_bukrs LIKE vbak-bukrs_vf,
             p_vkorg LIKE vbak-vkorg,
            p_vtweg LIKE vbak-vtweg,
            p_spart LIKE vbak-spart.
SELECT-OPTIONS: s_kunnr FOR vbak-kunnr,
                s_audat FOR vbak-audat.
SELECTION-SCREEN END OF BLOCK b1.
*----------- AT SELECTION-SCREEN --------------------------*
AT SELECTION-SCREEN.
SELECT SINGLE * FROM t001 INTO t001
                            WHERE bukrs = p_bukrs.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Company Code'.
ENDIF.
SELECT SINGLE * FROM vbak INTO vbak
                          WHERE vkorg = p_vkorg.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Sales Organization'.
ENDIF.
SELECT SINGLE * FROM vbak INTO vbak
                            WHERE vtweg = p_vtweg.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid distribution channel'.
ENDIF.
SELECT SINGLE * FROM vbak INTO vbak
                            WHERE spart = p_spart.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Division'.
ENDIF.
SELECT SINGLE * FROM kna1 INTO kna1
                            WHERE kunnr IN s_kunnr.
IF sy-subrc <> 0.
    MESSAGE e000(8i) WITH 'Enter a Valid Customer Number'.
ENDIF.
*----------- START-OF-SELECTION-----------------------------*
START-OF-SELECTION.
ls-typ = 'H'.
ls-info = 'Sales Document Flow'.
APPEND ls TO lh.
ls-typ = 'S'.
WRITE: sy-datum TO l_date USING EDIT MASK '__/__/____'.
CONCATENATE 'DATE :' l_date INTO l_date1 SEPARATED BY space.
ls-info = l_date1.
APPEND ls TO lh.
PERFORM field_cat.
PERFORM t_sort_build USING i_sort.
PERFORM get-data.
*----------- END-OF-SELECTION-----------------------------*
END-OF-SELECTION.
IF it_final[] IS INITIAL.
    MESSAGE i000(8i) WITH 'No data Found'.
    EXIT.
ENDIF.
PERFORM print-data.
*&      Form get-data
*       text
* --> p1        text
* <-- p2        text
FORM get-data .
* Accesing Sales Data
SELECT a~vbeln a~kunnr b~posnr b~matnr b~kwmeng b~netwr
   INTO CORRESPONDING FIELDS OF TABLE it_so
   FROM vbak AS a INNER JOIN vbap AS b
                         ON a~vbeln = b~vbeln
                          WHERE a~bukrs_vf = p_bukrs
                             AND a~vkorg = p_vkorg
                             AND a~vtweg = p_vtweg
                                AND a~spart = p_spart
                                 AND a~kunnr IN s_kunnr
                                      AND a~audat IN s_audat.
LOOP AT it_so.
    SELECT SINGLE name1 FROM kna1 INTO v_name
                                     WHERE kunnr = it_so-kunnr.
    SELECT SINGLE vbeln FROM vbfa INTO v_delnum
                                      WHERE vbelv = it_so-vbeln
                                        AND vbtyp_n = 'J'.
    IF sy-subrc = 0.
      SELECT SINGLE vbeln FROM vbfa INTO v_invnum
                            WHERE vbelv = v_delnum
                              AND vbtyp_n = 'M'.
    ENDIF.
    MOVE-CORRESPONDING it_so TO it_final.
    it_final-name = v_name.
    it_final-delnum = v_delnum.
    it_final-invnum = v_invnum.
    APPEND it_final.
    CLEAR it_final.
    CLEAR v_delnum.
    CLEAR v_invnum.
ENDLOOP.
LOOP AT it_final.
    IF it_final-delnum NE ' '.
* Reading Del Data.
      SELECT SINGLE a~vbeln a~lfdat b~posnr b~lfimg   INTO
                (it_del-delnum, it_del-lfdat, it_del-delitem,
                 it_del-lfimg ) FROM
                    likp AS a INNER JOIN lips AS b ON a~vbeln = b~vbeln
                               WHERE a~vbeln = it_final-delnum
                               AND b~posnr = it_final-posnr.
      MOVE-CORRESPONDING it_del TO it_final.
      MODIFY it_final.
    ENDIF.
    IF it_final-invnum NE ' '.
* Reading Invoice Data.
      SELECT SINGLE vbeln posnr fkimg netwr INTO
     (it_inv-invnum, it_inv-invitem, it_inv-fkimg, it_inv-amount )
                   FROM vbrp WHERE vbeln = it_final-invnum
                              AND   posnr = it_final-posnr.
      MOVE-CORRESPONDING it_inv TO it_final.
      MODIFY it_final.
    ENDIF.
ENDLOOP.
ENDFORM.                    " get-data
*&      Form print-data
*       text
* --> p1        text
* <-- p2        text
FORM print-data .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
*     I_INTERFACE_CHECK                 = ' '
*     I_BYPASSING_BUFFER                = ' '
*     I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = l_repid
*     I_CALLBACK_PF_STATUS_SET          = ' '
*     I_CALLBACK_USER_COMMAND           = ' '
     i_callback_top_of_page            = 'TOP'
*     I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*     I_CALLBACK_HTML_END_OF_LIST       = ' '
*     I_STRUCTURE_NAME                  =
*     I_BACKGROUND_ID                   = ' '
*     I_GRID_TITLE                      =
*     I_GRID_SETTINGS                   =
*     IS_LAYOUT                         =
     it_fieldcat                       = it_fcat
*     IT_EXCLUDING                      =
*     IT_SPECIAL_GROUPS                 =
     IT_SORT                           = i_sort[]
*     IT_FILTER                         =
*     IS_SEL_HIDE                       =
*     I_DEFAULT                         = 'X'
*     I_SAVE                            = ' '
*     IS_VARIANT                        =
*     IT_EVENTS                         =
*     IT_EVENT_EXIT                     =
*     IS_PRINT                          =
*     IS_REPREP_ID                      =
*     I_SCREEN_START_COLUMN             = 0
*     I_SCREEN_START_LINE               = 0
*     I_SCREEN_END_COLUMN               = 0
*     I_SCREEN_END_LINE                 = 0
*     IT_ALV_GRAPHICS                   =
*     IT_HYPERLINK                      =
*     IT_ADD_FIELDCAT                   =
*     IT_EXCEPT_QINFO                   =
*     I_HTML_HEIGHT_TOP                 =
*     I_HTML_HEIGHT_END                 =
*   IMPORTING
*     E_EXIT_CAUSED_BY_CALLER           =
*     ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it_final.
*   EXCEPTIONS
*     PROGRAM_ERROR                     = 1
*     OTHERS                            = 2
* IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM.                    " print-data
*&      Form field_cat
*       text
* --> p1        text
* <-- p2        text
FORM field_cat .
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'VBELN'.
wa_fcat-key = 'X'.
wa_fcat-ref_fieldname = 'VBELN'.
wa_fcat-ref_tabname = 'VBAK'.
wa_fcat-seltext_m = 'Sales Order NO'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'POSNR'.
wa_fcat-ref_fieldname = 'POSNR'.
wa_fcat-ref_tabname = 'VBAP'.
wa_fcat-seltext_m = 'SalesItemNO'.
wa_fcat-fix_column = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'KUNNR'.
wa_fcat-seltext_m = 'CUSTNUM'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'NAME'.
wa_fcat-seltext_m = 'CUSTNAME'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-seltext_m = 'MATNUM'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'KWMENG'.
wa_fcat-seltext_m = 'Sales Quantity'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'NETWR'.
wa_fcat-seltext_m = 'Value'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'DELNUM'.
wa_fcat-seltext_m = 'DeloveryNum'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'DELITEM'.
wa_fcat-seltext_m = 'DelItemNO'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'LFDAT'.
wa_fcat-seltext_m = 'DelDate'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'LFIMG'.
wa_fcat-seltext_m = 'DelQuantity'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'INVNUM'.
wa_fcat-seltext_m = 'InvoiceNum'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'INVITEM'.
wa_fcat-seltext_m = 'InvoiceItem'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'FKIMG'.
wa_fcat-seltext_m = 'INVQuantity'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
wa_fcat-col_pos = w_var.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-fieldname = 'AMOUNT'.
wa_fcat-seltext_m = 'INVvalue'.
wa_fcat-do_sum = 'X'.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ADD 1 TO w_var.
ENDFORM.     " field_cat
*&      Form top
*       text
FORM t_sort_build USING l_sort TYPE slis_t_sortinfo_alv.
DATA: ls_sort TYPE slis_sortinfo_alv.
ls_sort-fieldname = 'VBELN'.
ls_sort-spos      = 1.
ls_sort-up        = 'X'.
ls_sort-subtot    = 'X'.
APPEND ls_sort TO l_sort.
ls_sort-fieldname = 'KUNNR'.
ls_sort-spos      = 2.
ls_sort-up        = 'X'.
APPEND ls_sort TO l_sort.
ENDFORM.                    "t_sort_bui
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = lh
*   I_LOGO                   =
*   I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP
===========================================================================
I have started the new program but i have trouble with the final internal table. Since i'm using For all entries I have declared internal tables for each table. My incomplete new program is as follows(not sure if the logic is correct till what I have coded):
*& Report Z_SDFLOW                                                    *
REPORT Z_SDFLOW NO STANDARD PAGE HEADING.
********* TABLES TO BE USED ***********************
**** VBAK - SALES DOCUMENT HEADER
* VBAP - SALES ITEM
* VBFA - SALES DOCUMENT FLOW
* KNA1- CUSTOMER MASTER
* VBRK - BILLING DOCUMENT HEADER
* VBRP - BLLING DOCUMENT ITEM
* LIKP - DELIVERY HEADER
* LIPS - DELIVERY ITEM
* TOO1 - COMPANY CODES
* SLIS.
TYPE-POOLS: SLIS.
** STRUCTURE DECLARATIONS ********
**STRUCTURE FOR ENQUIRY.
**STRUCTURE FOR QUOTATION.
**STRUCTURE FOR SALES ORDER HEADER- VBAK.
TYPES: BEGIN OF XT_VBAK,
VBELN TYPE VBAK-VBELN,     "SALES DOCUMENT NUMBER
KUNNR TYPE VBAK-KUNNR,     " SOLD-TO-PARTY
END OF XT_VBAK.
**STRUCTURE FOR SALES ORDER ITEM-VBAP
TYPES: BEGIN OF XT_VBAP,
POSNR TYPE VBAP-POSNR,     " SALES ITEM NUMBER
MATNR TYPE VBAP-MATNR,     " MATERIAL NUMBER
KWMENG TYPE VBAP-KWMENG,   " CUMMULATIVE ORDER QUANTITY IN SALES UNITS
NETWR TYPE VBAP-NETWR,     " NET VALUE OF THE ORDER ITEM
END OF XT_VBAP.
** STRUCTURE FOR DELIVERY HEADER -LIKP
TYPES: BEGIN OF XT_LIKP,
DELVBELN TYPE LIKP-VBELN,           "DELIVERY DOCUMENT NUMBER
LFDAT TYPE LIKP-LFDAT,           " DELIVERY DATE
END OF XT_LIKP.
**STRUCTURE FOR DELIVERY ITEM - LIPS
TYPES: BEGIN OF XT_LIPS,
DELPOSNR TYPE LIPS-POSNR,           " DELIVERY ITEM NUMBER
LFIMG TYPE LIPS-LFIMG,           " ACTUAL QUANTITY DELIVERED
END OF XT_LIPS.
**STRUCTURE FOR BILLING DOCUMENT HEADER -VBRK
TYPES: BEGIN OF XT_VBRK,
INVVBELN TYPE VBRK-VBELN,          "BILLING DOCUMENT NUMBER
END OF XT_VBRK.
**STRUCTURE FOR BILLING DOCUMENT ITEM - VBRP
TYPES: BEGIN OF XT_VBRP,
INVPOSNR TYPE VBRP-POSNR,          "BILLING ITEM NUMBER
FKIMG TYPE VBRP-FKIMG,          "ACTUAL INVOICED QUANTITY
INVNETWR TYPE VBRP-NETWR,          "NET VALUE OF THE BILLING ITEM
END OF XT_VBRP.
**STRUCTURE FOR FINAL INTERNAL TABLE.
TYPES: BEGIN OF XT_FINAL,
VBELN TYPE VBAK-VBELN,
DELVBELN TYPE LIKP-VBELN,
INVBELN TYPE VBRK-VBELN,
KUNNR TYPE VBAK-KUNNR,
POSNR TYPE VBAP-POSNR,
DELPOSNT TYPE LIPS-POSNR,
INVPOSNR TYPE VBRP-POSNR,
MATNR TYPE VBAP-MATNR,
KWMENG TYPE VBAP-KWMENG,
NETWR TYPE VBAP-NETWR,
INVNETWR TYPE VBRP-NETWR,
LFDAT TYPE LIKP-LFDAT,
LFIMG TYPE LIPS-LFIMG,
FKIMG TYPE VBRP-FKIMG,
NAME1 TYPE KNA1-NAME1,
END OF XT_FINAL.
**DATA DECLARATIONS
DATA: V_NAME1 TYPE KNA1-NAME1, "#EC *
      V_DELVBELN TYPE LIKP-VBELN,
      V_INVVBELN TYPE VBRK-VBELN,
      V_BUKRS TYPE T001-BUKRS,    "COMPANY CODE "#EC *
      V_AUDAT TYPE VBAK-AUDAT,
      V_VKORG TYPE VBAK-VKORG,
      V_VKGRP TYPE VBAK-VKGRP,
      V_SPART TYPE VBAK-SPART.
**INTERNAL TABLE DECLARATIONS
DATA: IT_VBAK TYPE STANDARD TABLE OF XT_VBAK,
      WA_VBAK TYPE XT_VBAK,
      IT_VBAP TYPE STANDARD TABLE OF XT_VBAP,
      WA_VBAP TYPE XT_VBAP,
      IT_LIKP TYPE STANDARD TABLE OF XT_LIKP,
      WA_LIKP TYPE XT_LIKP,
      IT_LIPS TYPE STANDARD TABLE OF XT_LIPS,
      WA_LIPS TYPE XT_LIPS,
      IT_VBRK TYPE STANDARD TABLE OF XT_VBRK,
      WA_VBRK TYPE XT_VBRK,
      IT_VBRP TYPE STANDARD TABLE OF XT_VBRP,
      WA_VBRP TYPE XT_VBRP,
      IT_FINAL TYPE STANDARD TABLE OF XT_FINAL,
      WA_FINAL TYPE XT_FINAL.
**ALV DECLARATIONS
DATA: IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV,
      WA_FLDCAT TYPE SLIS_FIELDCAT_ALV,
      IT_LSTHDR TYPE SLIS_T_LISTHEADER,
      WA_LSTHDR TYPE SLIS_LISTHEADER,
      IT_EVENTS TYPE SLIS_T_EVENT,
      WA_EVENTS TYPE SLIS_ALV_EVENT,
      IT_SORT TYPE SLIS_T_SORTINFO_ALV,
      IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: S_BUKRS FOR V_BUKRS NO INTERVALS NO-EXTENSION,
                S_VBELN FOR WA_VBAK-VBELN, "SALES DOCUMENT NUMBER
                S_KUNNR FOR WA_VBAK-KUNNR, "SOLD-TO-PARTY
                S_AUDAT FOR V_AUDAT,      "SALES DOCUMENT DATE
                S_VKORG FOR V_VKORG,      "SALES ORGANISATION
                S_VKGRP FOR V_VKGRP,      "SALES GROUP
                S_SPART FOR V_SPART.      "DIVISION
SELECTION-SCREEN END OF BLOCK b1.
*****************SCREEN VALIDATION***************
AT SELECTION-SCREEN.
SELECT SINGLE BUKRS FROM T001 INTO V_BUKRS WHERE BUKRS IN S_BUKRS."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID COMPANY CODE'.
ENDIF.
SELECT SINGLE VBELN FROM VBAK INTO
          CORRESPONDING FIELDS OF WA_VBAK WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER VALID SALES DOCUMENT NUMBER'.
ENDIF.
SELECT SINGLE KUNNR FROM VBAK INTO
          CORRESPONDING FIELDS OF WA_VBAK WHERE KUNNR IN S_KUNNR. "EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID CUSTOMER NUMBER'.
ENDIF.
SELECT SINGLE AUDAT FROM VBAK INTO V_AUDAT WHERE AUDAT IN S_AUDAT."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES DOCUMENT DATE'.
ENDIF.
SELECT SINGLE VKORG FROM VBAK INTO V_VKORG WHERE VKORG IN S_VKORG."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES ORGANISATION'.
ENDIF.
SELECT SINGLE VKGRP FROM VBAK INTO V_VKGRP WHERE VKGRP IN S_VKGRP."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES GROUP'.
ENDIF.
SELECT SINGLE SPART FROM VBAK INTO V_SPART WHERE SPART IN S_SPART."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES DIVISION'.
ENDIF.
PERFORM GET_DATA.
*&      Form GET_DATA
FORM GET_DATA .
SELECT VBELN KUNNR
        INTO TABLE IT_VBAK
        FROM VBAK
        WHERE VBELN IN S_VBELN.
*        BUKRS_VF IN S_BUKRS AND
*        VKORG IN S_VKORG AND
*        VKGRP IN S_VKGRP AND
*        SPART IN S_SPART AND
*        KUNNR IN S_KUNNR AND
*        AUDAT IN S_AUDAT.
IF IT_VBAK[] IS NOT INITIAL.
SELECT POSNR MATNR KWMENG NETWR
        INTO TABLE IT_VBAP
        FROM VBAP
        FOR ALL ENTRIES IN IT_VBAK
        WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAK[] IS NOT INITIAL.
SELECT VBELN LFDAT
        INTO TABLE IT_LIKP
        FROM LIKP
        FOR ALL ENTRIES IN IT_VBAK
        WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAP[] IS NOT INITIAL.
SELECT POSNR LFIMG
        INTO TABLE IT_LIPS
        FROM LIPS
        FOR ALL ENTRIES IN IT_VBAP
        WHERE POSNR = IT_VBAP-POSNR.
ENDIF.
IF IT_LIKP[] IS NOT INITIAL.
SELECT VBELN
        INTO TABLE IT_VBRK
        FROM VBRK
        FOR ALL ENTRIES IN IT_LIKP
        WHERE VBELN = IT_LIKP-DELVBELN.
ENDIF.
IF IT_LIPS[] IS NOT INITIAL.
SELECT POSNR FKIMG NETWR
        INTO TABLE IT_VBRP
        FROM VBRP
        FOR ALL ENTRIES IN IT_LIPS
        WHERE POSNR = IT_LIPS-DELPOSNR.
ENDIF.
ENDFORM.                    " GET_DATA
Edited by: srk s on Jan 29, 2008 7:33 PM
Edited by: Alvaro Tejada Galindo on Jan 29, 2008 9:49 AM

Hi Satish,
I have started the new program but i have trouble with the final internal table. Since i'm using For all entries, I have declared internal tables for each table. My incomplete new program is as follows(not sure if the logic is correct till what I have coded):
*& Report Z_SDFLOW                                                    *
REPORT Z_SDFLOW NO STANDARD PAGE HEADING.
********* TABLES TO BE USED ***********************
**** VBAK - SALES DOCUMENT HEADER
* VBAP - SALES ITEM
* VBFA - SALES DOCUMENT FLOW
* KNA1- CUSTOMER MASTER
* VBRK - BILLING DOCUMENT HEADER
* VBRP - BLLING DOCUMENT ITEM
* LIKP - DELIVERY HEADER
* LIPS - DELIVERY ITEM
* TOO1 - COMPANY CODES
* SLIS.
TYPE-POOLS: SLIS.
** STRUCTURE DECLARATIONS ********
**STRUCTURE FOR ENQUIRY.
**STRUCTURE FOR QUOTATION.
**STRUCTURE FOR SALES ORDER HEADER- VBAK.
TYPES: BEGIN OF XT_VBAK,
VBELN TYPE VBAK-VBELN,     "SALES DOCUMENT NUMBER
KUNNR TYPE VBAK-KUNNR,     " SOLD-TO-PARTY
END OF XT_VBAK.
**STRUCTURE FOR SALES ORDER ITEM-VBAP
TYPES: BEGIN OF XT_VBAP,
POSNR TYPE VBAP-POSNR,     " SALES ITEM NUMBER
MATNR TYPE VBAP-MATNR,     " MATERIAL NUMBER
KWMENG TYPE VBAP-KWMENG,   " CUMMULATIVE ORDER QUANTITY IN SALES UNITS
NETWR TYPE VBAP-NETWR,     " NET VALUE OF THE ORDER ITEM
END OF XT_VBAP.
** STRUCTURE FOR DELIVERY HEADER -LIKP
TYPES: BEGIN OF XT_LIKP,
DELVBELN TYPE LIKP-VBELN,           "DELIVERY DOCUMENT NUMBER
LFDAT TYPE LIKP-LFDAT,           " DELIVERY DATE
END OF XT_LIKP.
**STRUCTURE FOR DELIVERY ITEM - LIPS
TYPES: BEGIN OF XT_LIPS,
DELPOSNR TYPE LIPS-POSNR,           " DELIVERY ITEM NUMBER
LFIMG TYPE LIPS-LFIMG,           " ACTUAL QUANTITY DELIVERED
END OF XT_LIPS.
**STRUCTURE FOR BILLING DOCUMENT HEADER -VBRK
TYPES: BEGIN OF XT_VBRK,
INVVBELN TYPE VBRK-VBELN,          "BILLING DOCUMENT NUMBER
END OF XT_VBRK.
**STRUCTURE FOR BILLING DOCUMENT ITEM - VBRP
TYPES: BEGIN OF XT_VBRP,
INVPOSNR TYPE VBRP-POSNR,          "BILLING ITEM NUMBER
FKIMG TYPE VBRP-FKIMG,          "ACTUAL INVOICED QUANTITY
INVNETWR TYPE VBRP-NETWR,          "NET VALUE OF THE BILLING ITEM
END OF XT_VBRP.
**STRUCTURE FOR FINAL INTERNAL TABLE.
TYPES: BEGIN OF XT_FINAL,
VBELN TYPE VBAK-VBELN,
DELVBELN TYPE LIKP-VBELN,
INVBELN TYPE VBRK-VBELN,
KUNNR TYPE VBAK-KUNNR,
POSNR TYPE VBAP-POSNR,
DELPOSNT TYPE LIPS-POSNR,
INVPOSNR TYPE VBRP-POSNR,
MATNR TYPE VBAP-MATNR,
KWMENG TYPE VBAP-KWMENG,
NETWR TYPE VBAP-NETWR,
INVNETWR TYPE VBRP-NETWR,
LFDAT TYPE LIKP-LFDAT,
LFIMG TYPE LIPS-LFIMG,
FKIMG TYPE VBRP-FKIMG,
NAME1 TYPE KNA1-NAME1,
END OF XT_FINAL.
**DATA DECLARATIONS
DATA: V_NAME1 TYPE KNA1-NAME1, "#EC *
      V_DELVBELN TYPE LIKP-VBELN,
      V_INVVBELN TYPE VBRK-VBELN,
      V_BUKRS TYPE T001-BUKRS,    "COMPANY CODE "#EC *
      V_AUDAT TYPE VBAK-AUDAT,
      V_VKORG TYPE VBAK-VKORG,
      V_VKGRP TYPE VBAK-VKGRP,
      V_SPART TYPE VBAK-SPART.
**INTERNAL TABLE DECLARATIONS
DATA: IT_VBAK TYPE STANDARD TABLE OF XT_VBAK,
      WA_VBAK TYPE XT_VBAK,
      IT_VBAP TYPE STANDARD TABLE OF XT_VBAP,
      WA_VBAP TYPE XT_VBAP,
      IT_LIKP TYPE STANDARD TABLE OF XT_LIKP,
      WA_LIKP TYPE XT_LIKP,
      IT_LIPS TYPE STANDARD TABLE OF XT_LIPS,
      WA_LIPS TYPE XT_LIPS,
      IT_VBRK TYPE STANDARD TABLE OF XT_VBRK,
      WA_VBRK TYPE XT_VBRK,
      IT_VBRP TYPE STANDARD TABLE OF XT_VBRP,
      WA_VBRP TYPE XT_VBRP,
      IT_FINAL TYPE STANDARD TABLE OF XT_FINAL,
      WA_FINAL TYPE XT_FINAL.
**ALV DECLARATIONS
DATA: IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV,
      WA_FLDCAT TYPE SLIS_FIELDCAT_ALV,
      IT_LSTHDR TYPE SLIS_T_LISTHEADER,
      WA_LSTHDR TYPE SLIS_LISTHEADER,
      IT_EVENTS TYPE SLIS_T_EVENT,
      WA_EVENTS TYPE SLIS_ALV_EVENT,
      IT_SORT TYPE SLIS_T_SORTINFO_ALV,
      IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: S_BUKRS FOR V_BUKRS NO INTERVALS NO-EXTENSION,
                S_VBELN FOR WA_VBAK-VBELN, "SALES DOCUMENT NUMBER
                S_KUNNR FOR WA_VBAK-KUNNR, "SOLD-TO-PARTY
                S_AUDAT FOR V_AUDAT,      "SALES DOCUMENT DATE
                S_VKORG FOR V_VKORG,      "SALES ORGANISATION
                S_VKGRP FOR V_VKGRP,      "SALES GROUP
                S_SPART FOR V_SPART.      "DIVISION
SELECTION-SCREEN END OF BLOCK b1.
*****************SCREEN VALIDATION***************
AT SELECTION-SCREEN.
SELECT SINGLE BUKRS FROM T001 INTO V_BUKRS WHERE BUKRS IN S_BUKRS."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID COMPANY CODE'.
ENDIF.
SELECT SINGLE VBELN FROM VBAK INTO
          CORRESPONDING FIELDS OF WA_VBAK WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER VALID SALES DOCUMENT NUMBER'.
ENDIF.
SELECT SINGLE KUNNR FROM VBAK INTO
          CORRESPONDING FIELDS OF WA_VBAK WHERE KUNNR IN S_KUNNR. "EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID CUSTOMER NUMBER'.
ENDIF.
SELECT SINGLE AUDAT FROM VBAK INTO V_AUDAT WHERE AUDAT IN S_AUDAT."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES DOCUMENT DATE'.
ENDIF.
SELECT SINGLE VKORG FROM VBAK INTO V_VKORG WHERE VKORG IN S_VKORG."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES ORGANISATION'.
ENDIF.
SELECT SINGLE VKGRP FROM VBAK INTO V_VKGRP WHERE VKGRP IN S_VKGRP."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES GROUP'.
ENDIF.
SELECT SINGLE SPART FROM VBAK INTO V_SPART WHERE SPART IN S_SPART."#EC *
IF SY-SUBRC <> 0.
MESSAGE E000(Z_SD2) WITH 'ENTER A VALID SALES DIVISION'.
ENDIF.
PERFORM GET_DATA.
*&      Form GET_DATA
FORM GET_DATA .
SELECT VBELN KUNNR
        INTO TABLE IT_VBAK
        FROM VBAK
        WHERE VBELN IN S_VBELN.
*        BUKRS_VF IN S_BUKRS AND
*        VKORG IN S_VKORG AND
*        VKGRP IN S_VKGRP AND
*        SPART IN S_SPART AND
*        KUNNR IN S_KUNNR AND
*        AUDAT IN S_AUDAT.
IF IT_VBAK[] IS NOT INITIAL.
SELECT POSNR MATNR KWMENG NETWR
        INTO TABLE IT_VBAP
        FROM VBAP
        FOR ALL ENTRIES IN IT_VBAK
        WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAK[] IS NOT INITIAL.
SELECT VBELN LFDAT
        INTO TABLE IT_LIKP
        FROM LIKP
        FOR ALL ENTRIES IN IT_VBAK
        WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAP[] IS NOT INITIAL.
SELECT POSNR LFIMG
        INTO TABLE IT_LIPS
        FROM LIPS
        FOR ALL ENTRIES IN IT_VBAP
        WHERE POSNR = IT_VBAP-POSNR.
ENDIF.
IF IT_LIKP[] IS NOT INITIAL.
SELECT VBELN
        INTO TABLE IT_VBRK
        FROM VBRK
        FOR ALL ENTRIES IN IT_LIKP
        WHERE VBELN = IT_LIKP-DELVBELN.
ENDIF.
IF IT_LIPS[] IS NOT INITIAL.
SELECT POSNR FKIMG NETWR
        INTO TABLE IT_VBRP
        FROM VBRP
        FOR ALL ENTRIES IN IT_LIPS
        WHERE POSNR = IT_LIPS-DELPOSNR.
ENDIF.
ENDFORM.                    " GET_DATA
Code Formatted by: Alvaro Tejada Galindo on Jan 29, 2008 9:48 AM

Use of for all entries in abap

Please tell me how to use "for all entries" in linking two
tables for retrieve informations by using corresponding fields in both the tables.plz send the codings.

REPORT YVCHIERSEQ                              .
TYPE-POOLS:SLIS.
DATA:T_VBAK TYPE STANDARD TABLE OF VBAK INITIAL SIZE 0,
     T_VBAP TYPE STANDARD TABLE OF VBAP INITIAL SIZE 0,
     W_VBAK TYPE VBAK,
     W_VBAP TYPE VBAP,
     G_VBELN TYPE VBAK-VBELN,
     W_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
     T_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
     W_KEYINFO TYPE SLIS_KEYINFO_ALV.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS:S_VBELN FOR G_VBELN.
SELECTION-SCREEN END OF BLOCK B1.
INITIALIZATION.
CLEAR:W_VBAK,
      W_VBAP.
REFRESH:T_VBAK,
        T_VBAP.
START-OF-SELECTION.
PERFORM SUB_GET_VBAK.
PERFORM SUB_GET_VBAP.
PERFORM SUB_DISP_OUTPUT.
FORM SUB_GET_VBAK.
SELECT * FROM VBAK INTO TABLE T_VBAK WHERE VBELN IN S_VBELN.
ENDFORM.
FORM SUB_GET_VBAP.
SELECT * FROM VBAP INTO TABLE T_VBAP FOR ALL ENTRIES IN T_VBAK WHERE
VBELN = T_VBAK-VBELN.
ENDFORM.
FORM SUB_DISP_OUTPUT.
W_FIELDCAT-COL_POS = 1.
W_FIELDCAT-FIELDNAME = 'VBELN'.
W_FIELDCAT-SELTEXT_M = 'SALESORDER'.
W_FIELDCAT-TABNAME = 'VBAK'.
APPEND W_FIELDCAT TO T_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-COL_POS = 2.
W_FIELDCAT-FIELDNAME = 'ERNAM'.
W_FIELDCAT-SELTEXT_M = 'NAME'.
W_FIELDCAT-TABNAME = 'VBAK'.
APPEND W_FIELDCAT TO T_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-COL_POS = 3.
W_FIELDCAT-FIELDNAME = 'VBTYP'.
W_FIELDCAT-SELTEXT_M = 'SD CATEGORY'.
W_FIELDCAT-TABNAME = 'VBAK'.
APPEND W_FIELDCAT TO T_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-COL_POS = 4.
W_FIELDCAT-FIELDNAME = 'KUNNR'.
W_FIELDCAT-SELTEXT_M = 'SOLD TO PARTY'.
W_FIELDCAT-TABNAME = 'VBAK'.
APPEND W_FIELDCAT TO T_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-COL_POS = 5.
W_FIELDCAT-FIELDNAME = 'NETWR'.
W_FIELDCAT-SELTEXT_M = 'NET VALUE'.
W_FIELDCAT-TABNAME = 'VBAK'.
APPEND W_FIELDCAT TO T_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-COL_POS = 1.
W_FIELDCAT-FIELDNAME = 'POSNR'.
W_FIELDCAT-SELTEXT_M = 'SALES ITEM'.
W_FIELDCAT-TABNAME = 'VBAP'.
APPEND W_FIELDCAT TO T_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-COL_POS = 2.
W_FIELDCAT-FIELDNAME = 'MATNR'.
W_FIELDCAT-SELTEXT_M = 'MATERIAL NO'.
W_FIELDCAT-TABNAME = 'VBAP'.
APPEND W_FIELDCAT TO T_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-COL_POS = 3.
W_FIELDCAT-FIELDNAME = 'MATKL'.
W_FIELDCAT-SELTEXT_M = 'MAT GROUP'.
W_FIELDCAT-TABNAME = 'VBAP'.
APPEND W_FIELDCAT TO T_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-COL_POS = 4.
W_FIELDCAT-FIELDNAME = 'NETWR'.
W_FIELDCAT-SELTEXT_M = 'NET VALUE'.
W_FIELDCAT-TABNAME = 'VBAP'.
APPEND W_FIELDCAT TO T_FIELDCAT.
CLEAR W_FIELDCAT.
W_KEYINFO-HEADER01 = 'VBELN'.
W_KEYINFO-ITEM01   = 'VBELN'.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
    I_CALLBACK_PROGRAM             = SY-CPROG
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
IS_LAYOUT                      =
    IT_FIELDCAT                    = T_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
    i_tabname_header               =   'VBAK'
    i_tabname_item                 = 'VBAP'
I_STRUCTURE_NAME_HEADER        =
I_STRUCTURE_NAME_ITEM          =
    is_keyinfo                     = W_KEYINFO
IS_PRINT                       =
IS_REPREP_ID                   =
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                =
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
tables
    t_outtab_header                = T_VBAK
    t_outtab_item                  = T_VBAP
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.

Performance Problems with "For all Entries" and a big internal table

We have big Performance Problems with following Statement:
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
FOR ALL ENTRIES IN gt_zmon_help
    WHERE
    status = 'IAI200' AND
    logdat IN gs_dat AND
    ztrack = gt_zmon_help-ztrack.
In the internal table gt_zmon_help are over 1000000 entries.
Anyone an Idea how to improve the Performance?
Thank you!

>
Matthias Weisensel wrote:
> We have big Performance Problems with following Statement:
>
>
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
>   FOR ALL ENTRIES IN gt_zmon_help
>     WHERE
>     status = 'IAI200' AND
>     logdat IN gs_dat AND
>     ztrack = gt_zmon_help-ztrack.
>
> In the internal table gt_zmon_help are over 1000000 entries.
> Anyone an Idea how to improve the Performance?
>
> Thank you!
You can't expect miracles. With over a million entries in your itab any select is going to take a bit of time. Do you really need all these records in the itab? How many records is the select bringing back? I'm assuming that you have got and are using indexes on your ZEEDMT_ZMON table.
In this situation, I'd first of all try to think of another way of running the query and restricting the amount of data, but if this were not possible I'd just run it in the background and accept that it is going to take a long time.

How to use single buffered table with FOR ALL ENTRIES KEYWORD

Hai,
I'm Using TJ02T Database table, It is single buffered table but at the same time I want to use FOR ALL ENTRIES KEYWORD , Please Help me.
Regards,
S.Janani

Hi,
FOR ALL ENTRIES will not depend on the buffering nature of the table. The single buffered table will only only buffer one record into memory. You can still use the statement to query the values, but it may have performance problems if the data volume is high since the records are not completely buffered into memory, the time will spent in getting data from DB.
Thanks..
Preetham S

HOW TO PRINT THE MATTER IN FOR ALL ENTRIES

HI HOW T PRINT THE FOR ALL ENTRIES MATTER

Hi Naresh,
You can only use FOR ALL ENTRIES IN ...WHERE ...in a SELECT statement.
SELECT ... FOR ALL ENTRIES IN itab WHERE cond returns the union of the solution sets of all SELECT statements that would result if you wrote a separate statement for each line of the internal table replacing the symbol itab-f with the corresponding value of component f in the WHERE condition.Duplicates are discarded from the result set. If the internal table itab does not contain any entries, the system treats the statement as though there were no WHERE cond condition, and selects all records (in the current client).
For example:
SELECT * FROM sflight INTO wa_sflight
FOR ALL ENTRIES IN ftab
WHERE CARRID = ftab-carrid AND
CONNID = ftab-connid AND
fldate = '20010228'.
This condition, return all entries of the sflight.
When using FOR ALL ENTRIES the number of matching records is restricted to the number of records in the internal table. If the number of records in the database tables is too large then join would cause overheads in performance. Additionally a JOIN bypasses the table buffering.
Thanks,
Reward If Helpful.

Performance on Select Single&Write AND Select*(For All Entries)&Read&Write

Hi Experts,
I got a code review problem & we are in a argument.
I need the best performance code out of this two codes. I have tested this both on 5 & 1000 & 3000 & 100,000 & 180,000 records.
But still, I just need a second opinion of experts.
TYPES : BEGIN OF ty_account,
        saknr   TYPE   skat-saknr,
        END OF ty_account.
DATA : g_txt50      TYPE skat-txt50.
DATA : g_it_skat    TYPE TABLE OF skat,       g_wa_skat    LIKE LINE OF g_it_skat.
DATA : g_it_account TYPE TABLE OF ty_account, g_wa_account LIKE LINE OF g_it_account.
Code 1.
SELECT saknr INTO TABLE g_it_account FROM skat.
LOOP AT g_it_account INTO g_wa_account.
SELECT SINGLE txt50 INTO g_txt50 FROM skat
    WHERE spras = 'E'
      AND ktopl = 'XXXX'
      AND saknr = g_wa_account-saknr.
WRITE :/ g_wa_account-saknr, g_txt50.
CLEAR : g_wa_account, g_txt50.
ENDLOOP.
Code 2.
SELECT saknr INTO TABLE g_it_account FROM skat.
SELECT * INTO TABLE g_it_skat FROM skat
FOR ALL ENTRIES IN g_it_account
      WHERE spras = 'E'
        AND ktopl = 'XXXX'
        AND saknr = g_it_account-saknr.
LOOP AT g_it_account INTO g_wa_account.
READ TABLE g_it_skat INTO g_wa_skat WITH KEY saknr = g_wa_account-saknr.
WRITE :/ g_wa_account-saknr, g_wa_skat-txt50.
CLEAR : g_wa_account, g_wa_skat.
ENDLOOP.
Thanks & Regards,
Dileep .C

Hi Dilip.
from you both the code I have found that you are selecting 2 diffrent fields.
In Code 1.
you are selecting SAKNR and then for these SAKNR you are selecting TXT50 from the same table.
and in Code 2 you are selecting all the fields from SAKT table for all the values of SAKNR.
I don't know whats your requirement.
Better you declare a select option on screen and then fetch required fields from SAKT table for the values entered on screen for SAKNR.
you only need TXT50 and SAKNR fields.
so declare two types one for SAKNR and another for TXT50.
Points to be remember.
1. while using for all entries always check the for all entries table should not be blank.
2. you will have to fetch all the key fields in table while applying for all entries,
    you can compare key fields with a constant which is greater than initial value.
3. while reading the table sort the table by the field on which you are going to read it.
try this:
TYPES : BEGIN OF ty_account,
saknr TYPE skat-saknr,
END OF ty_account.
TYPES : begin of T_txt50,
      saknr type saknr,
      txt50 type txt50,
end of t_txt50.
DATA: i_account type table of t_account,
      w_account type t_account,
      i_txt50 type table t_txt50,
      w_txt50 type t_txt50.
select SAKNR from SKAT into table i_account.
if sy-subrc = 0.
sort i_account by saknr.
select saknr txt50 from SKAT into table i_txt50
for all entries in i_account
where SAKNR = i_account-SAKNR
here mention al the primary keys and compare them with their constants.
endif.
Note; here you need to take care that, you will have to fetch all the key fields in table i_txt50.
and compare those fields with there constants which should be greater than initial values.
they should be in proper sequence.
now for writing.
loop at i_account into w_account.
clear w_txt50.
sort i_txt50 by saknr.
read table i_txt50 into w_txt50 with key SAKNR = w_account-saknr
if sy-subrc = 0.
write: w_txt50-saknr, w-txt50-txt50.
clear w_txt50, w_account.
endif.
endloop.
Hope it wil clear your doubts.
Thanks
Lalit

For All Entries is NOT better than INNER JOIN in most cases

I quote from Siegfried Boes' excellent post here: Will writing an inner join be better or creating a view?
For all the FOR ALL ENTRIES lovers ... there is no proof for these reappearing recommendation.
There is nearly nobody who receives forum points, who recommends FOR ALL ENTRIES instead of Joins. What is the reason ???
It is easier to prove the opposite. A Join is a nested loop inside the database, a FOR ALL ENTRIES is partly outside of the database. FOR ALL ENTRIES works in blocks, joins on totals.
FOR ALL ENTRIES are not recommded on really large tables, because the chances are too high that
too many records are transferred.
People prefer FOR ALL ENTRIES, because JOINs are not so easy to understand. Joins can go wrong, but with a bit of understanding they can be fixed.
Some Joins are slow and can not be fixed, but then the FOR ALL ENTRIES would be extremely slow.
There are several kinds of views:
- projection views, i.e. only one table involved just fields reduced
- join views, several tables, joins conditions stored in dictionary
- materialized views, here the joined data are actually stored in the database. Storing and synchronisation has to be done manually.
Only the last one creates real overhead. It should be the exception.
Join Views and Joins are nearly identical. The view is better for reuse. The join is better in complicated, becuase if the access goes wrong, it can often be fixed by adding a hint. Hints can not be added to views.
Abraham Bukit points out:
If it is cluster table, (you can't use join). If it is buffered table, I would also say avoid join.
If they all are transaction table which are not buffered and are not cluster tables.
He further supports Siegfried's statement that FAE is easier to undestand than INNER JOINs.
Thomas Zloch says, regarding buffered tables:
At least think twice, maybe compare runtimes if in doubt.
So, unless someone has some EVIDENCE that FOR ALL ENTRIES is better, I don't think we want to see this discussed further.
Kind regards
Matt

To give food for thought here's an example I gave in a thread:
If you have a statement like
SELECT ... FOR ALL ENTRIES IN FAE_itab WHERE f = FAE_itab-f.
SAP sends it to the database depending how the parameter rsdb/prefer_union_all is set:
rsdb/prefer_union_all = 0 =>
SELECT ... WHERE f = FAE_itab[1]-f
          OR    f = FAE_itab[2]-f
          OR    f = FAE_itab[N]-f
You have some influence of the generated statement type: Instead of OR'ed fields an IN list can be used
if you have only a single coulmn N to compare:
rsdb/prefer_in_itab_opt parameter:
SELECT ... WHERE f IN (itab[1]-f, itab[2]-f, ..., itab[N]-f)
rsdb/prefer_union_all = 1 =>
SELECT ... WHERE f = FAE_itab[1]-f
UNION ALL SELECT ... WHERE f = FAE_itab[2]-f
UNION ALL SELECT ... WHERE f = FAE_itab[N]-f
see: Note 48230 - Parameters for the SELECT ... FOR ALL ENTRIES statement
As you can see for the 2nd parameter several statements are generated and combined with a UNION ALL,
the first setting generates statements with OR's (or uses IN if possible) for the entries in FAE_itab.
I give you a little example here (my parameters are set in a way that the OR's are translated to IN lists; i traced the execution in ST05)
Select myid into table t_tabcount from mydbtable
for all entries in t_table    " 484 entries
    where myid = t_table-myid .
ST05 trace:
|Transaction SEU_INT|Work process no 0|Proc.type DIA|Client 200|User |
|Duration |Obj. name |Op.    |Recs.|RC    |Statement|
| 640|mydbtable |PREPARE|   | 0|SELECT WHERE "myid" IN ( :A0 , :A1 , :A2 , :A3 , :A4 ) AND "myid" = :A5|
| 2|mydbtable |OPEN   |   | 0|SELECT WHERE "myid" IN ( 1 , 2 , 3 , 4 , 5 ) AND "myid" = 72 |
| 2.536|mydbtable |FETCH |    0| 1403|   |
| 3|mydbtable |REOPEN |   | 0|SELECT WHERE "myid" IN ( 6 , 7 , 8 , 9 , 10 ) AND "myid" = 72 |
| 118|mydbtable |FETCH | 0| |
| 2|mydbtable |REOPEN | | 0|SELECT WHERE "myid" IN ( 11 , 12 , 13 , 14 , 15 ) AND "myid" = 72     |
| 3|mydbtable |REOPEN | | 0|SELECT WHERE "myid" IN ( 475 , 476 , 477 , 478 , 479 ) AND "myid" = 72 |
| 94|mydbtable |FETCH | 0| 1403|   |
| 2|mydbtable |REOPEN |   | 0|SELECT WHERE "myid" IN ( 480 , 481 , 482 , 483 , 484 ) AND "myid" = 72 |
You see the IN list contained 5 entries each , wich made up about 97 statements for all 484 entries.
For every statment you have a single fetch operation wich means a separate access to the database.
If you would replace the FAE with a join you would only have one fetch to the database.
With the example above we can derive these observations:
1. From database point of view these settings kill performance when you access a big table and/or have a lot of entries or columns in your FAE_itab. Furthermore, you hide information what data you will access
at all and thus you block the database from creating a more efficient execution plan because it DOESN'T KNOW wich data you will select in the next step. I.e. it may be more efficient to scan the table in one shot instead of having many index accesses - but the database can make this decision only if it can examine ONE statement that has ALL the information of what data to retrieve.
2. A second impact is that with every statement execution you trigger the allocation of database resources
wich will contribute to the overhead described above.
Said that, FAE can never be a replacement for joining big tables (think of having a table with thousands of records in a FAE table )
Edited by: kishan P on Nov 2, 2010 2:16 PM - Format Fixed

How to restrict field of BSEG using for all entries in

Hi All,
i want restrict field BSEG-UMSKZ by using for all entries in but facing some problem.can someone tell me how to use with example.If you want to see my Query is this.
SELECT: bkpf~belnr
         with_item~buzei
         bkpf~blart
         with_item~wt_acco AS lifnr
         lfa1~name1
         lfa1~stras
         lfa1~ort01
         lfa1~stcd2 AS lifntn
         lfa1~stcd1 AS lifnic
         bkpf~budat
         wt_qsshb AS dmbtr
         qsatz
         witht
         wt_withcd
         wt_qbshb
         hkont
         with_item~wt_wtexmn
   INTO CORRESPONDING FIELDS
   OF TABLE gi_accdocs
   FROM bkpf
   JOIN with_item
   ON ( with_itembukrs = bkpfbukrs AND
   with_itembelnr = bkpfbelnr AND
   with_itemgjahr = bkpfgjahr )
   JOIN lfa1
   ON ( lfa1lifnr = with_itemwt_acco )
   WHERE bkpf~bukrs EQ p_bukrs AND
   bkpf~gjahr EQ p_gjahr AND
   bkpf~budat IN s_budat AND
   bkpf~stblg EQ space AND
   wt_withcd IN s_withcd AND
   with_item~wt_acco IN s_lifnr AND
   with_item~hkont IN s_hkont AND
   bkpf~belnr IN s_belnr.
Thanks & Regards,

hi,
this is the whole coding with FOR ALL ENTRIES:
SELECT: bkpf~belnr
         with_item~buzei
         bkpf~blart
         with_item~wt_acco AS lifnr
         lfa1~name1
         lfa1~stras
         lfa1~ort01
         lfa1~stcd2 AS lifntn
         lfa1~stcd1 AS lifnic
         bkpf~budat
         wt_qsshb AS dmbtr
         qsatz
         witht
         wt_withcd
         wt_qbshb
         hkont
         with_item~wt_wtexmn
   INTO CORRESPONDING FIELDS
   OF TABLE gi_accdocs
   FROM bkpf
   JOIN with_item
   ON ( with_itembukrs = bkpfbukrs AND
   with_itembelnr = bkpfbelnr AND
   with_itemgjahr = bkpfgjahr )
   JOIN lfa1
   ON ( lfa1lifnr = with_itemwt_acco )
   WHERE bkpf~bukrs EQ p_bukrs AND
   bkpf~gjahr EQ p_gjahr AND
   bkpf~budat IN s_budat AND
   bkpf~stblg EQ space AND
   wt_withcd IN s_withcd AND
   with_item~wt_acco IN s_lifnr AND
   with_item~hkont IN s_hkont AND
   bkpf~belnr IN s_belnr.
    SELECT UMSKZ
      from BSEG
      INTO CORRESPONDING FIELDS OF TABLE gi_amount
      FOR ALL ENTRIES IN GI_MAIN
      WHERE UMSKZ NE 'F'.
Thanks & Regards.

For all entries Where condition character length partilally has to be used

Hi,
I need to fetch all the data reocrds of one internal table into the other with the condition that in one of the field of first internal table only partial length of the character has to be used as a where condition.
Example:
Select xxxx
          yyyyy
          zzzzz
into it_tab2
for all entries in itab1
where field2 = itab1-field1(4).
where field1 of itab1 has length of 8 and field2 belongs to itab2.
As it throws the error msg :
it will ignore the length restriction mentioned in where condition of the for all entries

Hi.
If you are trying to fetch from any database table based on your modified table use this logic.
Dfine another internal table same as itab1, with field one lenght as 4 char.
ex:
data: begin of it_tab2.
        field1(4),
end of it_tab2.
loop at it_tab1.
it_tab2 = itab1+0(4).
append it_tab2.
clear it_tab2.
endloop.
now you can fetch from database table....using it_tab2.
Select xxxx
yyyyy
zzzzz
into it_tab3
for all entries in itab2
where field2 = itab2-field1(4).
If you only want to move the entries form one internal table to another internal table and truncate the field1 of itab1.
then no need to use any for all entries...
apply this logic
data: begin of it_tab2.
        field1(4),
end of it_tab2.
loop at it_tab1.
it_tab2 = itab1+0(4).
append it_tab2.
clear it_tab2.
endloop.
Regards,
Satish

For All Entries in i_tab

Similar Messages

Maybe you are looking for