For all the people in philippines

how much is the ipod touch? where?

in Power Mac Center in Greenbelt Makati, iTouch (or ipod Touch) cost about cost 16,990 for iTouch 8 GB and 22,990 for 16 GB
this is they're website
it's powermaccenter.com
the only brochures i got is from them lol

Similar Messages

For all the people on the fence with Creative products

To whom it may concern,
I have been using Creative lab products since the original Soundblaster series was introduced for public consumption oh so many years ago....and I have never been happier with a manufacturer when it comes to sound cards.
Not one manaufacture puts the features or quality into their soundcards like creative does, and their driver support has been pretty top-notch over the years.
Now no one is perfect, but I find it funny that after building 500+ PC's in the past 8 years, that I seem to be the only one in this forum (besides the admin and mods) that has had almost ZERO problems with their soundcards (And I personally have owned everything from a Soundblaster ISA to the Audigy 2 ZS).
I've installed countless other brands of soundcards in customer machines (And only because the customer was "a cheapskate" and deemed cost was more important than quality.) And everytime I've had a customer come back to complain about the horrible sound problems, replacing the el' cheapo soundcard with a SoundBlaster ALWAYS took care of the problem...and If had my way, I would never sell a machine without one.
BUT, as long as their are UN-INFORMED CHEAPSKATES that insist on spending the absolute BOTTOM DOLLAR on thier computers, your gonna see the same typical "my soundcard dont work, and its everybody's fault but mine" complaints in forums like this one.
Half or more of the people that post their gripes and complaints in this forum are the same type of idiots that refuse to spend more than 300.00 on a PC, expect it to run like they spent 3,000.00, then cant figure out why the thing dont work worth a crap every time they use it or try to upgrade it.
If most of these people just did some research before they just ran out to wal-mart to buy their computer, and maybe took a class or bought a couple of books (AND READ THEM), most of these complaints and gripes would dissappear.
I've found that 95% of the problems with soundcard installs has nothing with the card itself (Short of a driver issue)....nearly every problem with a non-functioning soundcard stems from either improper BIOS configuration, improper PCI slot selection for the card, or just a CHEAP / GENERIC MOTHERBOARD.
As with anything else in life.....YOU GET WHAT YOU PAY FOR...if you spend 50 dollars on a junk motherboard when you shoulda spent 50.00....WHAT THE HECK DO YOU EXPECT TO GET OUT OF IT.
With all that said.... I know this was a long rant, but I couldnt take seeing how so many people in this forum do nothing but cut down on creative for problems that were most likely the fault of the user to begin with.
REMEMBER PEOPLE.....GIGO, Computers only do what their told to do.

JSA2,
Whether you're pro-Creative or anti-Creative doesn't make a difference if you're going to personally insult people. I appreciate the sentiment of the post, but if you want to continue posting here you'll have to remain civil, or we will suspend your account.
BostonDanglr,
The same applies to you. Even if you feel personally insulted by a post, don't let it get to you. You say you haven't heard from us in 0 days, was your contact with us by e-mail? If so, post a thread on General and let me know, and I'll get someone to look into why you haven't had a reply. If you're referring to this forum, this is not a Support forum, so we don't guarantee a response. Please read the Announcement link for more information.
Cat
Message Edited by Catherina-CL on 02-08-2005 09:42 AM

A suggestion for all the people with panics and piix

Everyone may overlook this because it seems so simple of a possible fix. So I will try to explain why it may help. It has worked for me, and several others. My laptop uses this chipset, and so it intermittantly panics for me if I don't use this. My information may not be 100% precise, but I will try to explain the best I know.
Since linux started using udev, hardware detection is asynchronous now. This allows faster and more efficient detection, but can cause all sorts of problems depending on the quality of your motherboard, bios, and other gear. So depending on circumstances, the time it takes for udev to get responses from all hardwares might vary depending on any number of circumstances. Limitless changes in kernel, firmwares, bios, drivers, etc- everyone's experience might vary. It may have worked fine in 2.6.17, but 2.6.18 does not work at all, 2.6.19 is spotty, etc...
This problem mostly occurs in my usb/external and sata drives. But in certain times I will get panic on my ide internal drive on boot. The bootloader relies on BIOS detection to get started. But once kernel loads, control is turned over to kernel. But kernel/udev request might not get response in time (since its asynchronous now) before boot tries to turn over to root=/dev/xxx. So mount fails, panic occurs. Earlymodules=piix tries to thwart this problem by loading the module much sooner. But again, depending on yout hardware, it might not happen soon enough. Also, since the drive will be busy at random times depending, it might need to finish up before it will respond to udev.
In summary, the drive has not responded to udev/kernel before the bootloader finishes loading the kernel and tries to turn control over to the new root. earlymodules=piix works for some, not others. Especially now since pata over ide. If you have this problem, the fix very well might be as simple as this, especially if you have sata, scsi or usb drives: Add rootdelay=15 on kernel line in bootloader. For example:
kernel /boot/vmlinuz26ck root=/dev/sda2 rootdelay=15
15=15 seconds. Might not need this much, but 15 second delay should be ample time for most people. For me, i don't use the earlymodules=piix, and I use rootdelay=5, and every time is fine. This option tells the kernel to literally wait x seconds before trying to turn root=/dev/xxx over and continuing boot. during this pause, you might see misc. devices returning info to udev before continuing, including your drive.
It really probably does seem to easy or simple to be true. But try it- it might work for you. I have seen more people say OMG IT WORKED!! versus people who say it didn't. Hope this helps some of you.

JSA2,
Whether you're pro-Creative or anti-Creative doesn't make a difference if you're going to personally insult people. I appreciate the sentiment of the post, but if you want to continue posting here you'll have to remain civil, or we will suspend your account.
BostonDanglr,
The same applies to you. Even if you feel personally insulted by a post, don't let it get to you. You say you haven't heard from us in 0 days, was your contact with us by e-mail? If so, post a thread on General and let me know, and I'll get someone to look into why you haven't had a reply. If you're referring to this forum, this is not a Support forum, so we don't guarantee a response. Please read the Announcement link for more information.
Cat
Message Edited by Catherina-CL on 02-08-2005 09:42 AM

Solution for all the people who installed iOS 5.0.1 in their iphone4 or iphone4s

Dear All, Here is the solution to solve the problems you are facing after you install iOS5.0.1 in your iphone4 or iphone4s. Please try the below steps....hope no more issues such as "NO SERVICE", "SEARCHING" or phone gets hang-up....
After installing iOS5.0.1 (either 9A405 or 9A406) don't worry.. just perform the below steps
1: Go to Settings
2: Go to General
3: Go to Network
4: Enable Cellular data (press ON)
5: Enable Data roaming (press ON)
IT IS NOT MUST TO ENABLE 3G ( Keep it OFF)
Enjoy..........

Just was talking with my aunt on Viber, suddenly I missed the screen and now I've restored my iPhone 5C by using iTunes. At the end of processing while my phone was about to start, it made a vibration like its going to start and i had a hope to see the Apple logo, but I couldn't find any sign! I still can not get access to my phone! what am I suppose to do? I searched among many sites on the internet and I found several cases as mine, they also are facing with same problem and these are all because of the new version of iOS. I need my phone back.

USELESS ONLINE HELP FACILITIES For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.

USELESS ONLINE HELP FACILITIES
For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.
Incident 1. Since many months attempts to download new and updated APPs produced a response – Apple ID Disabled. I had no time to consult an APPLE Store due to work in distant lands. When I finally visited yesterday I was told that as my IPAD has been reported as stolen, and APPLE in its wisdom had blocked its usage! I am not sure how they became so misinformed and nobody every advised me while with a few swift moves APPLE could have located me by email address or SKYPE.
Incident 2. Once the above anomaly had been fixed I tried to down load a newspaper and diligently input my address, credit card number and personal data. Repeatedly I was advised that my Credit Card was invalid and my postal code was incorrect! Really!
I was left to guess that having moved from UK to the US I should have advised APPLE! Not being told of this requirement brought about a second visit to APPLE Store in the same day to waste both mine and their time with a routine anomaly. How parochial in the context of a globalized world!
In each case I tried to resolve the issues using online access to a help line and by calling by phone at the numbers on the APPLE Website. In each of four separate occasions I diligently went through the routine and ended up with a message that thanked me for contacting Apple followed by a polite ‘Good Bye’!
In desperation I went to an Apple Store for the second time in a day as it is close to where I live when I am not working. On both occasions I was courteously attended to by Apple Staff.
However, my work is usually far away from the US and it is generally many thousands of miles to the nearest Apple Store therefore online help is viewed as imperative if one is to resolve issues away from home.
Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help? It would cost nothing in relative terms and might restore my high level of anti-APPLE sentiment that these two recent events have provoked.
Peter Hanney
Miami, Fl.

Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help?
If that is your question, the answer is at the bottom right of this web page. It is clearly marked "Contact Us" and is the best way, really the only way, to contact Apple.
If there were a publicly posted email address for concerns such as yours, it would be quickly filled with spam in about three minutes, thereby becoming instantly useless to you and everyone else. Apple would need to change it hourly, if not more often. That is also the reason you ought not to post your name, location, and what appears to be your iPad's serial number on this publicly viewable website.
Apple does not respond here and I can find no other questions for your fellow Apple users to answer.

Do we have any third party FLEX component libraries to support accessibility feature for all the components(like: ViewStack, ToggleButtonBar, charts and etc..) ?

I am working on FLEX 4.6 SDK it provides 35 components with built in accessibility support. My Application contains some components which have no built in accessibility support but I need to provide accessibility support for those components too. I have gone through the Flex docs to customize the non accessible components to support accessibility feature, But the docs where not clear. To customize a single component I have to overwrite lot of code in SDK level.
and it takes lot of effort.
So, I would like to use FLEX component libraries which provides accessibility support for all the component.
Could you please guide me how can I provide accessibility support for other components with out putting more effort on it.
Thanks in advance...

There is already such thing in myfaces called "security context" [1]. You could find build of sandbox.jar [2]
[1] http://myfaces.apache.org/sandbox/securityContext.html
[2] http://people.apache.org/builds/myfaces/nightly/

TS3623 Pressing play on purchased downloads and it starts to download but then returns to the play button. This is for all the purchased items I have. However pressing play on previews works. Please advise.

Pressing play on purchased downloads and it starts to download but then returns to the play button. This is for all the purchased items I have. However pressing play on previews works. Please advise.

Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
Also check your payment details, make sure your details are exactly how they appear on your credit card statement, you might also try changing some of those details, saving them and changing them back again.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.
At this point in time, I’m wondering if this could be related to (but not restricted to) the new feature that allows others to come into your home and use your Apple TV to download and play their content on your Apple TV without logging into their account on your Apple TV. The Terms of Use for iTunes Store content have always been to require you to only purchase and play the content from the store in the location where you live and to use a credit card registered in that location. Previously Apple seem to have been somewhat lenient on enforcing such restrictions, perhaps now they are not. However I don’t really have any evidence to support this suggestion, except that changes made to accounts in these areas do appear to be helping many.
If you are successful in resolving your problem, perhaps you would let us know exactly which action resolved the problem for you. If you are having this problem to begin with, can you also tell us your location.

Do all the people in family sharing group have to have same last name?

do all the people in family sharing group have to have same last name?

Hi ant_barry,
Happy New Year! The Family Sharing program does not require members of the family to share the same name. Here is some general information for you:
OS X Yosemite: What is Family Sharing?
http://support.apple.com/kb/PH19007
Family Sharing lets up to six members of your family share their iTunes Store, App Store, and iBooks Store purchases, a family calendar, family reminders list, and family photos, all without sharing accounts.
One adult—the family organizer—sets up Family Sharing, invites up to five people to join the family group, and agrees to pay for any iTunes Store, App Store, and iBooks Store purchases those family members initiate while part of the family group. Once set up, family members get immediate access to each other’s music, movies, TV shows, books, and eligible apps. In addition, family members can easily share photos in a shared family album, add events to a family calendar, share their location with other family members, and even help locate another family member’s missing device.
Each family member needs to have an Apple ID he or she uses for iCloud. For a child too young to create his or her own Apple ID, the family organizer can provide parental consent for a child to have his or her own Apple ID and create it on the child’s behalf while adding the child to the family.
To join a family, you must sign in to iCloud with your Apple ID. You will also be asked to confirm the Apple ID you use for the iTunes Store, App Store, and iBooks Store. You can be part of only one family group at a time, and you can switch families at most once per year.
Family Sharing is available on iOS devices with iOS 8 or later, Mac computers with OS X Yosemite (v10.10) or later, and Windows computers with iCloud for Windows 4.0 or later.
Join a family
Set up Family Sharing
Last Modified: Nov 19, 2014
Cheers!
- Judy

Can I adjust all the master gains for all the keyframes at once?

I edited a whole scene and keyframed some corrections but I wanted to change a few settings for the keyframes such as master gain. Is there anyway to fix this so I can just adjust all the master gians for all the keyframes at once? Thanks!

If its the vignette geometry that is keyframed, and not the corrections, as written, (there is a distinction) then the color values are presumably NOT keyframed, as the keyframe only applies to that room/component of the grade, and not the whole grade. Your Primary In correction, in this case, is NOT keyframed and all the normal rules for revising corrections apply.
Apple COLOR has a systemic definition: a change in values for a ROOM is a "correction", and the accumulation of corrections for a clips is a 'grade'.
Keyframes only govern the behaviour of the room that they are created in, and don't apply across the board to the whole grade. The advantage is that the corrections can act independently.. the disadvantage is that the grade itself cannot be copy-and-pasted into another keyframed clip without any preparations.
There are ways of doing that that are not in the Manual.
I concur with your view of tracking, and you do have to do a wetware estimate to decide whether the investment is worth it... maybe a start and end keyframe is all you need, and adjust the trajectory as required.
Wetware= that 'goo' between most people's ears, that starts right behind their eyes.
jPo

I purchased a student subscription to Creative Cloud. I got the confirming email. When I attempted to install the aps, kept getting a 30-day trial for all the aps. In the case of Photoshop, it was expired. How do I activate my Creative Cloud?

I purchased a student subscription to Creative Cloud. I got the confirming email. When I attempted to install the aps, kept getting a 30-day trial for all the aps. In the case of Photoshop, it was expired. How do I activate my Creative Cloud?

ChristinaW1111 for information on how to resolve the connection error preventing the active membership from authorizing then please see Sign in, activation, or connection errors | CS5.5 and later. If you have any questions regarding the steps listed within the document you are welcome to update this discussion.

Query For Finding Yearly Opening and Closing Balance for All the Items

Hi Experts,
I am working on Query Based Report for finding the Yearly Opening and Closing Stock for all the Items
i will give yearwise selection and I want opening and closing stock in between that years
Warm Regards,
Sandip Kokate
Edited by: Sandipk on May 20, 2011 1:58 PM

Hi,
Declare @SDate DateTime
Declare @EDate DateTime
Declare @Whse nvarchar(10)
Set @SDate= (SELECT min(F_RefDate) FROM OFPR T1 where T1.[Name] ='[1%]' )
Set @EDate= (SELECT max(T_RefDate) FROM OFPR T1 where T1.[Name] ='[%1]' )
Set @Whse=(Select Max(s2.Warehouse) from OINM S2 Where S2.Warehouse = '[%2]')
BEGIN
Select @Whse as 'Warehouse', a.Itemcode, max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance, sum(a.INq) as 'IN', sum(a.OUT) as OUT,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing ,
(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from( Select N1.Warehouse, N1.Itemcode, N1.Dscription, (sum(N1.inqty)-sum(n1.outqty))
as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
Where N1.DocDate < @SDate and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,
N1.Dscription Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance,
sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <= @EDate
and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription
Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <=@EDate and N1.OutQty > 0
and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
where a.ItemCode=I1.ItemCode
Group By a.Itemcode Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcode
END
I hope this will work for you.
In above query you can also user OFPR.Code, OFPR, Category OFPR.Indicator instead of OFPR.Name.
Regards
Vaibhav Anharwadkar
Edited by: Vaibhav Ancharwadkar on May 24, 2011 9:23 AM

How to update the condition price in the sales order for all the items

Hi,
How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
Thanks,
Balaram

Hi,
There is a change in the requirement.
Scenario:
I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
Thanks.
Balaram

How can I shut off all of the pop-up windows for all the Firefox updates?

How can I shut off all of the pop-up windows for all the Firefox and Thunderbird updates?
Apparently now Mozilla creates new versions of their browser and email apps every two weeks instead of just creating updates... I'm tired of all of the pop-up requests for these constant installation requests and all the problems that the new version installations create... I just want to use the software and be left alone.
I can't find a way to make Firefox and Thunderbird stop with the pop-up requests for new installations... is there a way to do this or has Mozilla just got it rigged so one can't just use the software without re-installing a new version every two weeks and running in to new plugin issues and missing features every time?
Help!
Thanks,
numetro

Is it possible that her computer is infected with malware.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?

Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?

You can each have your own ID for your own iTunes accounts, but in order for a device to stream via AirPlay to the same Apple TV, everything must use the same homesharing ID. This is not the same as your iTunes account ID (although it can be for one of the devices)

How to put a text in upper left hand corner for all the application?

I want to put a text in upper left hand corner for all the pages on application?
I don't want to put one page by another.
Thank you.

If you put it in a region on page zero, it will be inherited by all pages of the application.. Literally in the upper left corner? Even the login page? You could also modify the template page that your using from your theme, so that all pages would have this attribute, whichever you are more comfortable with..
Thank you,
Tony Miller
Webster, TX

For all the people in philippines

Similar Messages

Maybe you are looking for