For all the people on the fence with Creative products

To whom it may concern,
I have been using Creative lab products since the original Soundblaster series was introduced for public consumption oh so many years ago....and I have never been happier with a manufacturer when it comes to sound cards.
Not one manaufacture puts the features or quality into their soundcards like creative does, and their driver support has been pretty top-notch over the years.
Now no one is perfect, but I find it funny that after building 500+ PC's in the past 8 years, that I seem to be the only one in this forum (besides the admin and mods) that has had almost ZERO problems with their soundcards (And I personally have owned everything from a Soundblaster ISA to the Audigy 2 ZS).
I've installed countless other brands of soundcards in customer machines (And only because the customer was "a cheapskate" and deemed cost was more important than quality.) And everytime I've had a customer come back to complain about the horrible sound problems, replacing the el' cheapo soundcard with a SoundBlaster ALWAYS took care of the problem...and If had my way, I would never sell a machine without one.
BUT, as long as their are UN-INFORMED CHEAPSKATES that insist on spending the absolute BOTTOM DOLLAR on thier computers, your gonna see the same typical "my soundcard dont work, and its everybody's fault but mine" complaints in forums like this one.
Half or more of the people that post their gripes and complaints in this forum are the same type of idiots that refuse to spend more than 300.00 on a PC, expect it to run like they spent 3,000.00, then cant figure out why the thing dont work worth a crap every time they use it or try to upgrade it.
If most of these people just did some research before they just ran out to wal-mart to buy their computer, and maybe took a class or bought a couple of books (AND READ THEM), most of these complaints and gripes would dissappear.
I've found that 95% of the problems with soundcard installs has nothing with the card itself (Short of a driver issue)....nearly every problem with a non-functioning soundcard stems from either improper BIOS configuration, improper PCI slot selection for the card, or just a CHEAP / GENERIC MOTHERBOARD.
As with anything else in life.....YOU GET WHAT YOU PAY FOR...if you spend 50 dollars on a junk motherboard when you shoulda spent 50.00....WHAT THE HECK DO YOU EXPECT TO GET OUT OF IT.
With all that said.... I know this was a long rant, but I couldnt take seeing how so many people in this forum do nothing but cut down on creative for problems that were most likely the fault of the user to begin with.
REMEMBER PEOPLE.....GIGO, Computers only do what their told to do.

JSA2,
Whether you're pro-Creative or anti-Creative doesn't make a difference if you're going to personally insult people. I appreciate the sentiment of the post, but if you want to continue posting here you'll have to remain civil, or we will suspend your account.
BostonDanglr,
The same applies to you. Even if you feel personally insulted by a post, don't let it get to you. You say you haven't heard from us in 0 days, was your contact with us by e-mail? If so, post a thread on General and let me know, and I'll get someone to look into why you haven't had a reply. If you're referring to this forum, this is not a Support forum, so we don't guarantee a response. Please read the Announcement link for more information.
Cat
Message Edited by Catherina-CL on 02-08-2005 09:42 AM

Similar Messages

  • Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it.  Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions  and my sight is dropping !   Thx

    Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it.  Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions  and my sight is dropping !   Thx

    Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it.  Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions  and my sight is dropping !   Thx

  • Please could anybody has a sol, to bring images to the report for all employees which has no reference with images stored in some path

    Hi Obiee experts,
    I have placed the images in  below locations  and these images are independent and  has no reference to the employee id column in dimension table.but my client requires report with all the employees,with respect to the images.Could anybody can give me a solution for this.
        1) root: \apps\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
       2) root: \apps\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
       3) root: \apps\Middleware\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\analyticsRes
    Thanks in Advance
    kumar

    Hi Sreeni,
    The images are stored with employee ids reference like 1234.jpg in the image location path, so will it be possible to call those images into the report with no relation at database level.
    as you said in above mail even if if we cld try  to store the images in oracle database with format like CLOB format the rpd will not support the datatype to bring to that report level.
    Please let me know if you have any solution
    Thanks in Advance
    kumar

  • Can I set up folders for major classifications of music as opera, country, etc. and then put all the albums with the genre into those folders folders?

    Can I set up folders for major classifications of music as opera, country, etc. and then put all the albums with the genre into those folders folders?

    Hi Richard Bugdal1,
    Welcome to the Support Communities!
    You can't change the folder structure within iTunes, but you can easily change the view to sort by Genre.
    The link below will explain how to do this:
    Apple - Find Out How - Music - iTunes
    http://www.apple.com/findouthow/music/itunes.html#tips-viewoptions
    Cheers,
    Judy

  • I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures, even though I did and have checked multiple times. Please help, it's for Mother's Day.

    I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures and that I need to in order to purchase it, even though I did and have checked multiple times. Please help, it's for Mother's Day.

    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    LN

  • How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

    How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

    Thanks for looking into this Jeff!
    I work with an Inventory module software and is responsible for software detection across several computers. Once an updated version comes up, I update our database with latest software details to get it detected if installed on any machines.
    The problem tracking updates with Desktop Creative Cloud Software are;
    1)We have to have it installed with the CC applications in-order to get the notification of the latest updates and have to check everyday.
    2)Only relates to the latest updates, so in-between we may miss a prior update unknowingly.Hence, the remote machines having those updates may not get  detected with the software version update which would create problem in reporting.
    3)For all CC products, there is no base or previous updates available for installation if we miss one.
    I went through the Adobe Products Update pages [Product updates] which holds good when it comes to Acrobat and Reader software which I follow to track down any newer updates but this is inconsistent when it comes to CC products like in After Effects CC, Dreamweaver CC etc...
    So overall to be very specific, is there any one channel I can follow to get the notifications only for the updates on CC products and then may be I can rely on Desktop Creative Cloud for installation if not available anywhere like in product update pages of Adobe ?
    Regards,
    Subrat

  • I am having problems with the month of October.  When I have the full month view, the synced items from google calendars won't show.  But they do for all the other months.

    I am having problems with the month of October.  When I have the full month view, the synced items from google calendars won't show.  But they do for all the other months.  There is definitely a glitch somewhere because if I am on day view and try to click on day 15 of October, it will not let me.  It totally is acting weird.

    Free fonts, fonts from a reliable foundry?
    Have you tried removing them temporarily?
    Do you still have problems if you create a new Windows user account and log in with that? How about if you start in Safe Mode?
    And I would run a memory checker and see Troubleshoot font problems | Windows

  • I have iphone 4 with ios 7.0.3. but with ios 7.0.3 my phone is working very slow. please do something for all the iphone 4 user.

    i have iphone 4 with ios 7.0.3. but with ios 7.0.3 my phone is working very slow. please do something for all the iphone 4 user.

    Hi Tyler199869,
    If you are having issues making or receiving calls after updating your iPhone, you may find the following article helpful:
    iPhone: Troubleshooting issues making or receiving calls
    https://support.apple.com/kb/TS3406
    Regards,
    - Brenden

  • USELESS ONLINE HELP FACILITIES For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.

    USELESS ONLINE HELP FACILITIES
    For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.
    Incident 1. Since many months attempts to download new and updated APPs produced a response – Apple ID Disabled. I had no time to consult an APPLE Store due to work in distant lands. When I finally visited yesterday I was told that as my IPAD has been reported as stolen, and APPLE in its wisdom had blocked its usage! I am not sure how they became so misinformed and nobody every advised me while with a few swift moves APPLE could have located me by email address or SKYPE.
    Incident 2. Once the above anomaly had been fixed I tried to down load a newspaper and diligently input my address, credit card number and personal data. Repeatedly I was advised that my Credit Card was invalid and my postal code was incorrect! Really!
    I was left to guess that having moved from UK to the US I should have advised APPLE! Not being told of this requirement brought about a second visit to APPLE Store in the same day to waste both mine and their time with a routine anomaly. How parochial in the context of a globalized world!
    In each case I tried to resolve the issues using online access to a help line and by calling by phone at the numbers on the APPLE Website. In each of four separate occasions I diligently went through the routine and  ended up with a message that thanked me for contacting Apple followed by a polite ‘Good Bye’!
    In desperation I went to an Apple Store for the second time in a day as it is close to where I live when I am not working. On both occasions I was courteously attended to by Apple Staff.
    However, my work is usually far away from the US and it is generally many thousands of miles to the nearest Apple Store therefore online help is viewed as imperative if one is to resolve issues away from home.
    Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help? It would cost nothing in relative terms and might restore my high level of anti-APPLE sentiment that these two recent events have provoked.
    Peter Hanney
    Miami, Fl.

    Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help?
    If that is your question, the answer is at the bottom right of this web page. It is clearly marked "Contact Us" and is the best way, really the only way, to contact Apple.
    If there were a publicly posted email address for concerns such as yours, it would be quickly filled with spam in about three minutes, thereby becoming instantly useless to you and everyone else. Apple would need to change it hourly, if not more often. That is also the reason you ought not to post your name, location, and what appears to be your iPad's serial number on this publicly viewable website.
    Apple does not respond here and I can find no other questions for your fellow Apple users to answer.

  • Do we have any third party FLEX component libraries to support accessibility feature for all the components(like: ViewStack, ToggleButtonBar, charts and etc..) ?

    I am working on FLEX 4.6 SDK it provides 35 components with built in accessibility support. My Application contains some components which have no built in accessibility support but I need to provide accessibility support for those components too. I have gone through the Flex docs to customize the non accessible components to support accessibility feature, But the docs where not clear. To customize a single component I have to overwrite lot of code in SDK level.
    and it takes lot of effort.
    So, I would like to use FLEX component libraries which provides accessibility support for all the component.
    Could you please guide me how can I provide accessibility support for other components with out putting more effort on it.
    Thanks in advance...

    There is already such thing in myfaces called "security context" [1]. You could find build of sandbox.jar [2]
    [1] http://myfaces.apache.org/sandbox/securityContext.html
    [2] http://people.apache.org/builds/myfaces/nightly/

  • TS3623 Pressing play on purchased downloads and it starts to download  but then returns to the play button. This is for all the purchased items I have. However pressing play on previews works. Please advise.

    Pressing play on purchased downloads and it starts to download  but then returns to the play button. This is for all the purchased items I have. However pressing play on previews works. Please advise.

    Welcome to the Apple community.
    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    Also check your payment details, make sure your details are exactly how they appear on your credit card statement, you might also try changing some of those details, saving them and changing them back again.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.
    At this point in time, I’m wondering if this could be related to (but not restricted to) the new feature that allows others to come into your home and use your Apple TV to download and play their content on your Apple TV without logging into their account on your Apple TV. The Terms of Use for iTunes Store content have always been to require you to only purchase and play the content from the store in the location where you live and to use a credit card registered in that location. Previously Apple seem to have been somewhat lenient on enforcing such restrictions, perhaps now they are not. However I don’t really have any evidence to support this suggestion, except that changes made to accounts in these areas do appear to be helping many.
    If you are successful in resolving your problem, perhaps you would let us know exactly which action resolved the problem for you. If you are having this problem to begin with, can you also tell us your location.

  • Can I adjust all the master gains for all the keyframes at once?

    I edited a whole scene and keyframed some corrections but I wanted to change a few settings for the keyframes such as master gain. Is there anyway to fix this so I can just adjust all the master gians for all the keyframes at once? Thanks!

    If its the vignette geometry that is keyframed, and not the corrections, as written, (there is a distinction) then the color values are presumably NOT keyframed, as the keyframe only applies to that room/component of the grade, and not the whole grade. Your Primary In correction, in this case, is NOT keyframed and all the normal rules for revising corrections apply.
    Apple COLOR has a systemic definition: a change in values for a ROOM is a "correction", and the accumulation of corrections for a clips is a 'grade'.
    Keyframes only govern the behaviour of the room that they are created in, and don't apply across the board to the whole grade. The advantage is that the corrections can act independently.. the disadvantage is that the grade itself cannot be copy-and-pasted into another keyframed clip without any preparations.
    There are ways of doing that that are not in the Manual.
    I concur with your view of tracking, and you do have to do a wetware estimate to decide whether the investment is worth it... maybe a start and end keyframe is all you need, and adjust the trajectory as required.
    Wetware= that 'goo' between most people's ears, that starts right behind their eyes.
    jPo

  • How to update the condition price in the sales order for all the items

    Hi,
    How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
    Thanks,
    Balaram

    Hi,
    There is a change in the requirement.
    Scenario:
    I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
    For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
    Thanks.
    Balaram

  • How can I shut off all of the pop-up windows for all the Firefox updates?

    How can I shut off all of the pop-up windows for all the Firefox and Thunderbird updates?
    Apparently now Mozilla creates new versions of their browser and email apps every two weeks instead of just creating updates... I'm tired of all of the pop-up requests for these constant installation requests and all the problems that the new version installations create... I just want to use the software and be left alone.
    I can't find a way to make Firefox and Thunderbird stop with the pop-up requests for new installations... is there a way to do this or has Mozilla just got it rigged so one can't just use the software without re-installing a new version every two weeks and running in to new plugin issues and missing features every time?
    Help!
    Thanks,
    numetro

    Is it possible that her computer is infected with malware.
    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • How to put a text in upper left hand corner for all the application?

    I want to put a text in upper left hand corner for all the pages on application?
    I don't want to put one page by another.
    Thank you.

    If you put it in a region on page zero, it will be inherited by all pages of the application.. Literally in the upper left corner? Even the login page? You could also modify the template page that your using from your theme, so that all pages would have this attribute, whichever you are more comfortable with..
    Thank you,
    Tony Miller
    Webster, TX

Maybe you are looking for