For block and unblock date .

Hi All,
In me22n for standard PO there are 2 Lock icons under Header details,
In my Report the user wants that Lock icons details to be appeared in output. (ie) for block and unblock date .....
Kindly suggest me how to do it .....
Your Valuable answers will be rewarded .
Regards,
Vinoth.

Hi Paras
Try as below:
data: l_lock type ICON_D value '@06@',
l_ulock type ICON_D value '@07@'.
write:/ l_lock as icon,
/ l_ulock as icon.
Kind Regards
Eswar

Similar Messages

Tcode for block and unblock for the material

Hi Guru's
What are the t-codes for blocking the material
and to unblock the material.
Thanks in advance.
Rgds

HI u can block material in material master as informed in one of above thread in T-CODE : MM17 as well in T-CODE : MASS.
Re: BOM - block status (Urgent)
Message was edited by:
SHESAGIRI.G

Function Module for HU Block and Unblock

Hi,
Can you please tell me the function module name to Block and Unblock the Handling Unit
which is exists iin a particular warehouse?
I searched in SDN already with no luck.
Thanks in advance...
Sridhar ....

Hi,
Try the below Function Modules
SD_CUSTOMER_CHECK
SD_CUSTOMER_CHECK_1
SD_CUSTOMER_CHECK_B
SD_CUSTOMER_MAINTAIN_ALL
SD_CUSTOMER_MAINTAIN_KNKA_K
Regards,
Anki Reddy

Handling Unit Block and Unblock

Hi,
I have requirement to block and unblock Handling Unit or Storage Unit in warehouse management. How to block and unblock the
Handling Unit with the function module and what is the table where I can see the blocking status of
the Handling Unit .
I tried a lot before posting here with no luck.
Thanks...

Dear Sridhar,
I hope I get you right.
To change the status of handling unit to blocked stock, do the following:
- transaction code VLMOVE
- above select procedure "0023" --> Posting chance from unrestricted use stock to blocked stock (movement type 344)
- then enter handling unit number
- press enter --> you get new line item with this HU number below
- select this new line item --> post document
- on the next screen you get the number of material document just created
- now the handling unit is blocked
- to unblock it later - use another VLMOVE procedure
Table where you can see this status:
- check table LQUA (warehouse quants)
- enter the WH number and quant number (you get this one if you check details of the quant in bin) --> you get record for exactly this handling unit
- see field LQUA-BESTQ (equals S - blocked stock)
Hope this will be of any use.
Regards,
Primoz

[svn:osmf:] 17565: Fix FM-937: ProxyElement dispatches trait events for blocked and overridden traits.

Revision: 17565
Revision: 17565
Author:   [email protected]
Date:     2010-09-02 17:30:08 -0700 (Thu, 02 Sep 2010)
Log Message:
Fix FM-937: ProxyElement dispatches trait events for blocked and overridden traits. Add unit test.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-937
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/elements/ProxyElement.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestProxyElement.as

Block and unblock users

Hello,
I am triying to build an application that block and unblock users, using UME api.
This is the code that I created, but it is not working, I always get the exception. I call this method in onClick event of a button.
My user's database is a LDAP.
public void onLocked(Event event) throws PageException {
               IUserAccountFactory useraccountf;
               IUserAccount useraccount;
               String uniqueId;
               boolean locked;
               try{
                    useraccountf = UMFactory.getUserAccountFactory();
                    uniqueId = useraccountf.getUserAccountByLogonId(username).getUniqueID();
                    useraccount= UMFactory.getUserAccountFactory().getMutableUserAccount(uniqueId);
                    locked = useraccount.isLocked();
                    if (locked == false){
                         useraccount.setLocked(true,2);
                         useraccount.save();
                         useraccount.commit();
                         componentState = SUCCESS;
                    else{
                         myBean.setError(true);
                         myBean.setMessage("El Usuario ya estaba Inactivo");
                         componentState = EDIT_USER_DATA;
               catch (UMException e) {
                    e.printStackTrace();
                    componentState = ERROR;
Thanks,

hello, please see https://blog.mozilla.org/tanvi/2013/04/10/mixed-content-blocking-enabled-in-firefox-23/ for details why this is happening. firefox doesn't block vimeo in particular, but all active content (scripts, flash objects, etc.) that is served via http:// one sites that otherwise use a secure connection (https://).
i think vimeo is currently working on that: http://vimeo.com/help/faq/embedding#https but otherwise you'd have to temporarily switch to serving your site via http:// to avoid the issue...

Best practice for Plan and actual data

Hello, what is the best practice for Plan and actual data? should they both be in the same app or different?
Thanks.

Hi Zack,
It will be easier for you to maintain the data in a single application. Every application needs to have the category dimension, mandatorily. So, you can use this dimension to maintain the actual and plan data.
Hope this helps.

Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

Hi
how to create a external content type for Read and Update data from two tables in sqlserver using sharepoint designer 2010
i created a bcs service using centraladministration site
i have two tables in sqlserver
1)Employee
-empno
-firstname
-lastname
2)EmpDepartment
-empno
-deptno
-location
i want to just create a list to display employee details from two tables
empid firstname deptno location
and same time update in two tables
adil

When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list. When I attempt to edit it, I get an error:
External List fails when attached to a SQL view
Sorry, something went wrong
Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
I can edit the view in SQL Manager, so it seems strange that it fails.
Any advice would be greatly GREATLY appreciated.
Thanks,
Randy

HCM errors in phase Identify Objects for Transfer and Start Data Selection.

Hello Colleagues ,
Background: We are using TDMS HCM PA PD Expert package to transfer all of the HCM data
We are using TDMS 4.0 SP 5. We are trying to do the Configuraition in Identify Objects for Transfer and Start Data Selection.. In this phase, we are encountering the issue of 'choose to confirm to trigger data selection'. The only option in this activit is'confirm batch' and 'confirm online'. Even if we press the button, we are still encountering issues. What selections then or values can we use?Thank you. Kindly see screen shot
Regards,
Meinard

Hello Meinard,
There could be two issues:
First check if you have assigned the target ranges for the dialog user which you are using to select data from sender system. You need to maintain target ranges in activity 'Define target ranges for users' which you can find under activity "Configuration and Utilities in Control system".
Secondly, there could be authorizaton issues for the sender system user. Check for any authorization issue in SU53 in sender system for the user which you used to logon to sender system.
Thanks
Anita

TCODES FOR SENDINGIG AND RECEIVING DATA THROUGH ALE

Hi,
All,
Message type I can find for the following :
Equipment master: EQUIPMENT_CREATE
Work centre: WORKC2, WORKC3 or WORKC4
Functional location: FUNC_LOC_CREATE
but i did'nt find a transaction code for sending and receiving data through ALE.
For example: Send material T.code BD10,
Receive material T.code BD11.
Please give the solution.
Regards.

can Tx BD21 is of any help

Are there LabView VI's for accessing and writing data to a CDF?

I am currently trying to develop a data acquisition system using LabView to acquire the data and to write the data to a file in NSSDC's Common Data Format (CDF). The CDF distribution (Windows 2000) comes with a precompiled dll of the CDF library of functions. Unfortunately, LabView crashes when I try to use the Call Library Function node. I am confident that it is not a function prototype error, but it may be that the CDF library is not thread-safe.
Has anyone developed VIs for writing and accessing data in CDF format?
Does anyone know how I can determine why the Call Library Function node causes LabView to crash when it uses a particular dll? There are a host of reasons given in the "Using External Co
de" manual, but no apparant way of determining which one is the culprit.

Thank you for your response. Actually, I have solved the problem by recompiling the source code for the CDF distribution using the Cygwin development environment. Cygwin provides a unix C compiler and linker which can create Windows executables and dlls. After modifying the makefiles that came with the CDF distribution I was able to build the dll and then use the Call Library Module to access the CDF functions.
A note about this process: the linker that Cygwin exports both Windows-style and C-style functions when it creates the dll. Be carefull not to use functions that end in underscores from the CDF dll as C-style functions.
Also, I would like to point out that the current faliure method of the Call Library Module (i.e. crashing LabView) is not acceptable.
It would be much better if LabView would generate an error message or an error log entry in case of a dll failure. I would hope that this scenario would be a target goal for future development of LabView. The Call Library Module is an incredibly powerful tool in that opens up many avenues of development -- it deserves a better way diagnosing problems.

Does EBS license include tools for reporting and extracting data (queries)

Hello,
I'm recommending Oracle EBS to a customer and I need to mention what tools for reporting and extracting data (queries) are included in a Oracle EBS license.
I hope you can help me with that information, or at least with providing me the place where I can get the info.
Thanks in advance,
A/P Sergio Maestri

Hi,
Thanks, I think the same ... but the customer asked me about it ... I supose my answer will be that he can use Reports Builder for reporting and Toad or PLSQL Developer to access to the database and make queries ...
What about XML Publisher ? ...it can be used to make reports against an Oracle EBS database and integrate them into the EBS Application ?I believe you need a developer license to use Oracle Developer (Forms/Reports) for customizing/creating reports.
Global Pricing and Licensing
http://www.oracle.com/corporate/pricing/index.html
And IINM, the same thing applied to XML Publisher -- See this thread for a similar discussion.
eBiz & XML Publisher - Confusion
http://forums.oracle.com/forums/thread.jspa?messageID=3834445
Please contact your Oracle sales representative, he/she is the best one to answer such questions.
Thanks,
Hussein

Block and Unblock a GR/IR Account

Team,
I Blocked a GR/IR account to update open item management field. After the program finished I went back and unblocked account, I am able to post directly to the account, however receiving warehouse still gets a message that account is blocked even though it shows unblocked in master data.
Anyone has any idea is tehre is anotehr field I have to reset after this?
Thank You for you help

Not answered

Text for block and select option on the selection screen of Logical Databas

Hi,
I have copied a standard program (RFBELJ10) which is making use of LDB (BRF) and created a custom program. Now, the requirement is to add a selection screen option to the custom report and do some validation on the data extracted. I have added the select option and provided a text (lets say "Segment") to it using menu path Goto --> Text Elements --> Selection Texts and activated. But this text is not displayed on the screen when i execute the report. It is showing the string which i used while defining the select option.
Also i need to provide a frame and title to it. but its not displayed.
i have written the following code for that:
SELECTION-SCREEN: BEGIN OF BLOCK seg WITH FRAME TITLE text-h01. " Segment
SELECT-OPTIONS: s_segmnt FOR faglflexa-segment. " Segment
SELECTION-SCREEN: END OF BLOCK seg.
Could you please help me in getting the texts displayed for fram and the select option?
Thanks,
Phani

Solved the problem. I have maintained the text in German. So, when I execute the report in english, it is not displaying the text. I have translated the texts to English and is working fine now.

Credit block and release Date and time

Dear All,
I require a report which can display credit block status date and time and credit release status date and time for sales order. I have gone through the report RSSCD100 with object class VERKBELEG.It is not fullfilling the requirement as it only display change information.
If customer has already exceeded the credit limit and new sales order has been generated then this report will reflect its blocked status.
Kinldy help
Thank you,
NoMi

Hi,
IF it is not mentioned in single program .
You can develop a query by using multiple program. Please find the list of programs for CM
+Reports for Credit Management+
The following table provides an overview of all the reports available to you in the area of credit
management
Program Function
RFDKLI10 Customers with missing credit data
This report checks the data for the credit limit for completeness, and produces
the corresponding error lists. These can be used to re-maintain the
corresponding definitions manually, or per Batch Input.
RFDKLI20 Reorganization of credit limit for customers
This report enables you to reorganize the credit limit information in the control
areas.
RFDKLI30 Short overview credit limit
The report lists the central and control area-related data per customer.
RFDKLI40 Overview credit limit
The report provides you with an extensive overview of the customeru2019s credit
situation.
RFDKLI41 Credit master sheet
The credit master sheet enables you to display and print out the customer
master data for a single account, which is needed for the area of credit
management.
RFDKLI42 Early warning list
The early warning list enables you to display and print out customers in credit
management, who are viewed as critical customers in the area of credit checks
in SD.
RFDKLI43 Master data list
The master data list enables you to display and print out customersu2019 credit cards.
In particular, you can display information not contained in the standard system,
for example, user-defined fields or external data, which you have created with
specific additonal software.
RFDKLI50 Mass change credit limit data
This report allows quick mass change for master data in credit management.
RFDKLIAB Change display, credit management
With this report, you can display changes for credit management master data for
all accounts.
RVKRED06 Checking blocked credit documents
The report checks all blocked documents from credit view. The report is started
in the background, and should run after the incoming payments programs.
FI/SD - Credit Management/Risk Management SAP AG
Reports for Credit Management
RVKRED77 Reorganization credit data SD
The report enables you to reorganize open credit, delivery and billing document
values. It is used, for example, when updating errors occur.
RVKRED08 Checking sales documents which reach the credit horizon
The report checks all sales documents, which reach the dynamic credit check
horizon, as new. The report runs periodically, and should run at the start of a
period. The period for the u2018date of the next credit checku2019 is proposed from the
current date, with the help of the period split for open sales order values.
RVKRED09 Checking the credit documents from credit view
Released documents are only checked if the validity period for the release has
run out (number days).
RVKRED88 Simulation reorganization credit data SD
REgards,
Krishna O
Edited by: Krishna O on May 20, 2010 11:30 AM

For block and unblock date .

Similar Messages

Maybe you are looking for