For each and for all functions,personal conection

Hi
I have a questions like
can i use for each function footer in the report.
do i export personal connection into repositary if it possible any difference.
How running sum will claculate in the report.
Please any body clarify me
Regards,
Madhu

hi,
"Personal Connection" cannot be exported to repository.
i.e. A Universe which is developed using personal connection can't be exported to BO Repository. As a result, this Universe and connection will not be available to the Other Repository Users.
Running Sum
It is similar to RunningTotal in Crystal reports.
for eg. you have the below data.
A 20
B 5
C 30
If you insert a Running sum field to the above table
RunningSum([Revenue])
following are results.
A 20 20
B 5 25
C 30 55
Regards,
Vamsee

Similar Messages

This is regarding printing vertical lines for each and every field

Hi to all.....
1....Hi
here is a requirement
i want to print vertical lines and horizontal lines for each and every field in the output of a report.Here i want to see the output just like table i.e i want to draw line after each field.
                         suppose if the output list contains just 10 records, then the vertical line must end for 10 records.how to draw vertical lines for this requirement.
thanks and regards,
k.swaminath

Hi
In report you can use
sy-uline for horizontal line
sy-vline for vertical lines.
Check this sample report
DATA: BEGIN OF USR_TABL OCCURS 0.
INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
DATA: L_LENGTH TYPE I,
T_ABAPLIST LIKE ABAPLIST OCCURS 0 WITH HEADER LINE, BEGIN OF T_USER OCCURS 0, COUNTER TYPE I, SELECTION TYPE C, MANDT LIKE SY-MANDT, BNAME LIKE SY-UNAME, NAME_FIRST LIKE V_ADRP_CP-NAME_FIRST, NAME_LAST LIKE V_ADRP_CP-NAME_LAST, DEPARTMENT LIKE V_ADRP_CP-DEPARTMENT, TEL_NUMBER LIKE V_ADRP_CP-TEL_NUMBER, END OF T_USER, L_CLIENT LIKE SY-MANDT, L_USERID LIKE UINFO-BNAME, L_OPCODE TYPE X, L_FUNCT_CODE(1) TYPE C, L_TEST(200) TYPE C.
L_OPCODE = 2.
CALL ThUsrInfo ID OPCODE FIELD L_OPCODE
ID TAB FIELD USR_TABL-*SYS*.
CLEAR T_USER. REFRESH T_USER.
LOOP AT USR_TABL.
T_USER-MANDT = USR_TABL-MANDT. T_USER-BNAME = USR_TABL-BNAME. APPEND T_USER.
ENDLOOP.
SORT T_USER.
DELETE ADJACENT DUPLICATES FROM T_USER.
LOOP AT T_USER.
T_USER-COUNTER = SY-TABIX. SELECT V~NAME_FIRST V~NAME_LAST V~DEPARTMENT V~TEL_NUMBER INTO (T_USER-NAME_FIRST, T_USER-NAME_LAST, T_USER-DEPARTMENT, T_USER-TEL_NUMBER) FROM USR21 AS U JOIN V_ADRP_CP AS V ON U~PERSNUMBER = V~PERSNUMBER AND U~ADDRNUMBER = V~ADDRNUMBER WHERE U~BNAME = T_USER-BNAME. ENDSELECT. MODIFY T_USER.
ENDLOOP.
SORT T_USER BY NAME_LAST NAME_FIRST.
PERFORM DISPLAY_LIST.
TOP-OF-PAGE.
PERFORM DISPLAY_MENU.
    * End of top-of-page
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM DISPLAY_MENU.
    * End of top-of-page during line-selection
AT LINE-SELECTION.
IF SY-CUROW = 2. IF SY-CUCOL < 19. T_USER-SELECTION = X. MODIFY T_USER TRANSPORTING SELECTION WHERE SELECTION = . PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 36. CLEAR T_USER-SELECTION. MODIFY T_USER TRANSPORTING SELECTION WHERE SELECTION = X. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 50. PERFORM TRANSFER_SELECTION. PERFORM POPUP_MSG. ELSEIF SY-CUCOL < 67. PERFORM TRANSFER_SELECTION. SORT T_USER BY NAME_LAST. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 81. PERFORM TRANSFER_SELECTION. SORT T_USER BY NAME_FIRST. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 93. PERFORM TRANSFER_SELECTION. SORT T_USER BY MANDT. PERFORM DISPLAY_LIST. ENDIF. ENDIF.
    * End of line-selection
*& Form DISPLAY_LIST
FORM DISPLAY_LIST.
SY-LSIND = 0.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
LOOP AT T_USER.
WRITE: / SY-VLINE, T_USER-SELECTION AS CHECKBOX, SY-VLINE, T_USER-MANDT, SY-VLINE, T_USER-BNAME, SY-VLINE, T_USER-NAME_FIRST(15), SY-VLINE, T_USER-NAME_LAST(15), SY-VLINE, T_USER-DEPARTMENT, SY-VLINE, T_USER-TEL_NUMBER(20), SY-VLINE. HIDE: T_USER-COUNTER, T_USER-SELECTION.
ENDLOOP.
FORMAT COLOR OFF.
WRITE: /(108) SY-ULINE.
ENDFORM. DISPLAY_LIST
*& Form DISPLAY_MENU
FORM DISPLAY_MENU.
FORMAT COLOR COL_HEADING HOTSPOT. WRITE: (91) SY-ULINE, / SY-VLINE NO-GAP, (4) ICON_SELECT_ALL NO-GAP, Select All, SY-VLINE NO-GAP, (4) ICON_DESELECT_ALL NO-GAP, Deselect All, SY-VLINE NO-GAP, (4) ICON_SHORT_MESSAGE NO-GAP, Send Popup, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, Last Name NO-GAP, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, First Name NO-GAP, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, Client NO-GAP, SY-VLINE, /(91) SY-ULINE, /(108) SY-ULINE. FORMAT HOTSPOT OFF. WRITE: / SY-VLINE, , SY-VLINE, Cli, SY-VLINE, User , SY-VLINE, First Name , SY-VLINE, Last Name , SY-VLINE, Department , SY-VLINE, Telephone , SY-VLINE, /(108) SY-ULINE. FORMAT COLOR OFF.
ENDFORM. DISPLAY_MENU
*& Form TRANSFER_SELECTION
FORM TRANSFER_SELECTION.
DO. READ LINE SY-INDEX FIELD VALUE T_USER-SELECTION. IF SY-SUBRC <> 0. EXIT. ENDIF. MODIFY T_USER TRANSPORTING SELECTION WHERE COUNTER = T_USER-COUNTER. ENDDO. CLEAR T_USER.
ENDFORM. TRANSFER_SELECTION
*& Form POPUP_MSG
FORM POPUP_MSG.
DATA: L_MSG LIKE SM04DIC-POPUPMSG VALUE Experimental Message, L_LEN TYPE I, L_RET TYPE C. LOOP AT T_USER WHERE SELECTION = X. PERFORM GET_MESSAGE CHANGING L_MSG L_RET. EXIT. ENDLOOP. IF L_RET = A. User cancelled the message EXIT. ENDIF.
    * Get the message text
L_LEN = STRLEN. LOOP AT T_USER WHERE SELECTION = X. CALL FUNCTION TH_POPUP EXPORTING CLIENT = T_USER-MANDT USER = T_USER-BNAME MESSAGE = L_MSG MESSAGE_LEN = L_LENGTH
    * CUT_BLANKS =
EXCEPTIONS USER_NOT_FOUND = 1 OTHERS = 2. IF SY-SUBRC <> 0. WRITE: User , T_USER-BNAME, not found.. ENDIF. ENDLOOP. IF SY-SUBRC <> 0.
    * Big error! No user has been selected.
MESSAGE ID AT TYPE E NUMBER 315 WITH No user selected!. EXIT. ENDIF.
ENDFORM. POPUP_MSG
*& Form GET_MESSAGE
FORM GET_MESSAGE CHANGING P_L_MSG LIKE SM04DIC-POPUPMSG
P_RETURNCODE TYPE C.
DATA: BEGIN OF FIELDS OCCURS 1. INCLUDE STRUCTURE SVAL.
DATA: END OF FIELDS, RETURNCODE TYPE C.
FIELDS-TABNAME = SM04DIC.
FIELDS-FIELDNAME = POPUPMSG.
FIELDS-FIELDTEXT = Message :. CONCATENATE Msg from SY-UNAME . INTO FIELDS-VALUE SEPARATED BY . APPEND FIELDS.
CALL FUNCTION POPUP_GET_VALUES
EXPORTING POPUP_TITLE = Supply the popup message
IMPORTING RETURNCODE = P_RETURNCODE
TABLES FIELDS = FIELDS.
IF P_RETURNCODE = A.
EXIT.
ELSE.
READ TABLE FIELDS INDEX 1.
P_L_MSG = FIELDS-VALUE.
ENDIF.
ENDFORM. GET_MESSAGE
*End of Program
Regards
Pavan

How to get LASTDAY for each and every month between given dates..

Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friends

Here's a 8i solution :
select add_months(
         trunc(
           to_date('12-01-2011','DD-MM-YYYY')
         ,'MM'
       , rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
                                  trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
   trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
   trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11

Example codes for each and every class in API

hi,
Is there any place where i can get example code for eacha and every class in java API.
for eample...if i wanna find sample codes for all the clases in java.lang.*
please let me know ASAP.
thanks in advance

Try this
http://www.javaalmanac.com/egs/
It's almost complete, but you could help mr. Patrick Chan to write more samples for the few classes left in the Java API...

Example code for each and every class in java API

hi,
Is there any place where i can get example code for eacha and every class in java API.
for eample...if i wanna find sample codes for all the clases in java.lang.*
please let me know ASAP.
thanks in advance

Crossposted here: http://forum.java.sun.com/thread.jsp?thread=570264&forum=54&message=2820774

I accidentally set up two accounts. One account with my old e-mail address which I've been using for years and has all of my purchases on it. Now I have a new account with my current e-mail address. How do I disable this new account?

I accidentally set up two accounts. One account with my old e-mail address which I've been using for years and has all of my purchases on it. Now I have a new account with my current e-mail address. How do I disable this new account? I need to disable the new e-mail address account so that I can add it as an additional e-mail to my old account. THEN, how do I make this new e-mail address my primary e-mail for this old account?

Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
Next see:
Frequently Asked Questions About Apple ID

HT5622 How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

Create a new Apple ID for the second phone. If you are setting the phones up as new phone enter the ID you want to use on each phone.
If both phones are already signed in to one Apple ID then use the settings app to change Apple IDs on one phone.
Settings > iTunes and App Store > tap on the Apple ID > sign out > sign in with alternate Apple ID.
Note that if you have downloaded apps with the original Apple ID on the phone with the new Apple ID, those apps will still be associated with the old Apple ID and will require the old ID and password in order to update them.

HT204053 I am using my Apple ID for me and for my wife. when I sync. the phones i lost all my wife contact. how do i recover the contact from i cloud?

I am using my Apple ID for me and for my wife. when I sync. the phones i lost all my wife contact. how do i recover the contact from i cloud?

While I have a few ideas, I think you'd have better luck troubleshooting this in the iCloud forum.

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

TS2621 I have my data retrieval se to manual. When I get mail I get a popup on the screen for each and every e-mail asking if I want to view it or cancel and I have to cancel each one before I can resume any other actions on my ipad. How can I turn this o

I have my mail set to retrieve data manually. When I retrieve mail, I get a popup box for each and every e-mail message asking if I want to view or cancel and must either view or cancel each one before I can use other apps on the ipad. How can I turn these popups off?

Try reset iPad (not Restore)
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

When ordering enlarged photos from iPhoto, must I purchase them one at a time and pay a shipping fee for each and very one of them. Sort of a ripoff but I can't figure how to purchase many and pay one shipping fee.

When ordering enlarged photos from iPhoto, must I purchase them one at a time and pay a shipping fee for each and very one of them. Sort of a ripoff but I can't figure how to purchase many and pay one shipping fee.

You may have better luck posting in the iPhoto forum if no one on this forum is able to assist. I'm sure you are doing something wrong though.

I was using my wife's MacAir while my Macbook was in for repairs and now all of my printers want to do through her Macbook Air and unless it is on and on our home wireless, I can't print. Is there an easy "fix" for this?

I was using my wife's MacAir while my Macbook was in for repairs and now all of my printers want to do through her Macbook Air and unless it is on and on our home wireless, I can't print. Is there an easy "fix" for this?

See this post.
tt2

I bought versions for iPad and for MacBook. At synchronization of documents on MacBook all smilies from the Emoji keyboard disappeared. It is impossible to insert them into the text manually. Smiles of Emoji are supported by the program for Mac? Help to s

I bought versions for iPad and for MacBook. At synchronization of documents on MacBook all smilies from the Emoji keyboard disappeared. It is impossible to insert them into the text manually.
Smiles of Emoji are supported by the program for Mac?
Help to solve a problem, please.

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

For Each Loop for XML Task

Hello Everyone,
Please assist with a step by step guide on how to setup a For Each Loop for XML Task
I'm trying to convert XML to XSLT
I have tried more than 10 times and i just do not know what i am doing wrong - no error, my package just runs for a few seconds but nothing happens
Thanks in advance
Dee

I managed to get my XML to XSLT to work but now when i run my package to import the data into SQL table,
it stops after a few records, i get the following error:
[XML Source [1]] Error: The component "XML Source" (1) was unable to process the XML data. The element "Errors" cannot contain a child element. Content model is text only.
Please assist
Check this:
http://social.msdn.microsoft.com/Forums/en-US/80726e0c-9e85-43ca-87bc-7cf90fd7fb31/xml-source-data-flow-throws-cannot-contain-a-child-element-content-model-is-text-only-error?forum=sqlintegrationservices
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is.

Collapse All and Expand All functionality in Tree

Hi All,
I am using TreeByNestingTableColumn element to display the tree hierarchy .
Does anyone knows how to implement Collapse All and Expand All functionality for this tree (if someone have sample code for these functionality then it will be great for me) ?
Thanks in advance.
Ravi.

Hello Ravindra Sahu,
Code for EXPAND ALL button:
*step 1:Access node
lo_nd_tree_hierarchy = wd_context->get_child_node( name = wd_this->wdctx_tree_hierarchy ).
*step2: Extract all the table entries from node which is binded to table
lo_nd_tree_hierarchy->get_static_attributes_table(
    IMPORTING
      table = lt_tree_hierarchy ).
*step3:set element attribute Expanded to abap_true
    loop at lt_tree_hierarchy ASSIGNING <ls_tree_hierarchy>.
      <ls_tree_hierarchy>-expanded = abap_true.
    endloop.
*step4: Finally the updated data needs to be binded.
lo_nd_tree_hierarchy->bind_table( lt_tree_hierarchy ).
Code for COLLAPSE ALL button:
*step 1:Access node
lo_nd_tree_hierarchy = wd_context->get_child_node( name = wd_this->wdctx_tree_hierarchy ).
*step2: Extract all the table entries from node which is binded to table
lo_nd_tree_hierarchy->get_static_attributes_table(
    IMPORTING
      table = lt_tree_hierarchy ).
*step3:set element attribute Expanded to abap_true
    loop at lt_tree_hierarchy ASSIGNING <ls_tree_hierarchy>.
      <ls_tree_hierarchy>-expanded = abap_false.
    endloop.
*step4: Finally the updated data needs to be binded.
lo_nd_tree_hierarchy->bind_table( lt_tree_hierarchy ).
Please don't forget giving REWARD points...:-)
Edited by: Bharath Komarapalem on Jul 11, 2008 9:17 AM

For each and for all functions,personal conection

Similar Messages

Maybe you are looking for