For the property PollingStatement issue in WCF-SQL adapter

Why i am getting below errors and finally receive port is disabled .
Configured WC_SQl properties :
In General tab:
InBoundID=PODepartment
IntialCatalog:Test
Server: .
First error :
The Messaging Engine failed to add a receive location "RL_WCFCustomer" with URL "mssql://.//Test?InboundId=PODepartment" to the adapter "WCF-SQL". Reason: "Microsoft.ServiceModel.Channels.Common.AdapterException: The value
"" for the property PollingStatement is invalid.
Second error:
The receive location "RL_WCFCustomer" with URL "mssql://.//Test?InboundId=PODepartment" is shutting down. Details:"The Messaging Engine failed while notifying an adapter of its configuration. ".

After configure below properties ,getting new issue,but i don't see the schema in admin console which has mentioned in below schema related issue
Property details
Inbound operation type:TypedPooling
Poll data available statement:select * from dbo.PODepartment
Polling statement:select * from dbo.PODepartment
Issue Details:
There was a failure executing the receive pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLReceive, Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "XML disassembler" Receive
Port: "RPN_WCFCustomer" URI: "mssql://.//Test?InboundId=PODepartment" Reason: Finding the document specification by message type "http://schemas.microsoft.com/Sql/2008/05/TypedPolling/PODepartment#TypedPolling" failed. Verify
the schema deployed properly.

Similar Messages

WCF-SQL Adapter

How to add the wcf-sql adapter to BizTalk application?
Aditi

Hi Aditi,
To add WCF-SQL adapter follow the MSDN link:Adding the SQL Adapter to BizTalk Server Administration Console
To add WCF-SQL adapter and start working with it, follow the technet article :
BizTalk Server: WCF-SQL Adapter Table Operations
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server: Multiple XML files to Single FlatFile Using File Adapter

WCF-SQL Adapter Hangs in Active State for hours

I'm at a new client, and doing a simple test with a content-based-routing solution picks up a file, maps it, and is supposed to update a SQL database. The WCF-SQL send port is stuck in the "active" state. No messages in EventLog. If there's
an issue, I don't know why it doesn't just suspend.
Any ideas?
Thanks,
Neal Walters

Hi Neal,
Few things to check IMO,
Check if the host instance is running properly
Check the version of the Host instance, If required make the host instance to 32 bit.
If it is using any schemas then make sure the binaries are deployed and gace'ed
Try to restart the BizTalk host instance to see if it makes a difference
Check if your SQL Database Instance is UP and running , Make sure the BizTalk service Account has proper rights on the SQL server and has execute permission on the SQL Stored procedure (if using one)
Check if you have anything on the SQL server event viewer.
Try to complete you routing of file using a send port also which will copy the input message to a temp folder location , Try Using Failed Message Routing to see
if it helps!
There is an article
Configuring a Port Using the WCF-SQL Adapter for further reference.
HTH,
Naushad Alam
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or
Mark As Answer
alamnaushad.wordpress.com
My new TechNet Wiki
"BizTalk Server: Performance Tuning & Optimization"

Adjusting Portal Pages throws "Specify a value for the property {0}"

I found (with the help of our friends at OSS) the setting I need to change with to adjust the Runtime frame size for Guided Procedures.
It's quite logical really, since GP is just a bunch of pages in the portal it would make sense to find them in the Portal Content option ... So there it was.
Content Administration > Portal Content
Search for content and go to Process Instance. The following part shows the 3 main content parts of the GP Runtime window. As you can see in the third container are the two elements that contain your content. "Content Area" and "Public Content Area".
Open those two areas (scroll down in the list in the middle, select one and press open) and change the value of Height Type from "Fixed" to "Automatic" or "Full Page".
This is where I get my error (see the link below for a screenshot as well): When I try to change a value, any value or just open for modifying and try saving again (without changing anything) I get this error:
[http://wow.telenet.be/delaware/property0.jpg]
Specify a value for the property
Now I don't know if there any portal expert watching this thread, but it seems as though all those pages have been wrongly configured from the start. And until I figure out the right configuration I won't be able to save them either way.
My question is two-fold:
1) Can anyone provide me with all the settings he has for this component so I can compare them to mine?
2) How do I fix this error? I'm assuming every page in the portal gives the same error?
Thanks in advance,
Frederik-Jan
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM

I found (with the help of our friends at OSS) the setting I need to change with to adjust the Runtime frame size for Guided Procedures.
It's quite logical really, since GP is just a bunch of pages in the portal it would make sense to find them in the Portal Content option ... So there it was.
Content Administration > Portal Content
Search for content and go to Process Instance. The following part shows the 3 main content parts of the GP Runtime window. As you can see in the third container are the two elements that contain your content. "Content Area" and "Public Content Area".
Open those two areas (scroll down in the list in the middle, select one and press open) and change the value of Height Type from "Fixed" to "Automatic" or "Full Page".
This is where I get my error (see the link below for a screenshot as well): When I try to change a value, any value or just open for modifying and try saving again (without changing anything) I get this error:
[http://wow.telenet.be/delaware/property0.jpg]
Specify a value for the property
Now I don't know if there any portal expert watching this thread, but it seems as though all those pages have been wrongly configured from the start. And until I figure out the right configuration I won't be able to save them either way.
My question is two-fold:
1) Can anyone provide me with all the settings he has for this component so I can compare them to mine?
2) How do I fix this error? I'm assuming every page in the portal gives the same error?
Thanks in advance,
Frederik-Jan
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM

Has there been any helpful remedy for the ghost typing issue?

Has there been any helpful remedy for the ghost typing issue? Where the ipad starts typing on its own and screens moving around the screen?
I have had the ipad 1 for a while- and it started about 5 months ago. Anything other than shutting down and leaving alone for hours work?

Yeah, well if you read that whole thread you will see lots of posts identifying it as a hardware problem:
I'm the original poster on this thread. I ended up taking my iPad back to the Apple Store. They ran some diagnostics, and found that my RAM was almost maxed out, which didn't really make sense. It indicated a faulty processor, so they gave me a new iPad. I took it home, synched, and it only took about 45 minutes to synch 30 gigs of data. My original iPad took about 5 hours to synch for the first time. Clearly there was a problem with the processor in the first one, but I didn't realize it at first, as it took several weeks before it started exhibiting the erratic screen behavior. Hope this helps anyone else who might experience this down the line.
-merenvov
So i went to my apple store... which was PACKED. Found a manager and explained my problem. Without any question, they simply replaced it. Awesome!
-duncanwilcox
I have the same problem, and I found out what's wrong, it's not the software - restart, restore and FW upgrade will not help, it's definitely hardware. The best option is to replace your iPad assuming you have an apple store nearby…
-DarkDwarf
Just get your iPad replaced. It has a hardware problem.

Is there a fix for the wifi connectivity issue after ios6 update?

Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Is there a patch for the NTP security issue that does not require Xcode?

Is there a patch for the NTP security issue that does not require Xcode? I have an older Intel mini that can't be upgraded beyond 10.6.8 and I currently don't have room for Xcode 3.2.5. Has somebody trustworthy posted these binaries?

NTP fix for Snow Leopard: https://drive.google.com/folderview?id=0BxQCbeIgpA2uVjFiN1h4bGZNQ2c&usp=sharing
You can also go to System Preferences/Date & Time and deselect Set time Automatically.
Snow Leopard users: Turn off automatic date and time in System Preferences immediately

WCF-SQL Adapter Login fail 'NT AUTHORITY\ANONYMOUS LOGON

Hi,
I am have three WCF-SQL receive with WCF-SQL Adapater and two are working fine but the third one is giving the following warning in the Eventlog. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
I really appreciate your help.
thanks
Ram
---------------Warning written to EventLog ---------------
The adapter "WCF-SQL" raised an error message. Details "Microsoft.ServiceModel.Channels.Common.AdapterException: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.. Endpoint Address - mssql://txhubdb//switch_mailbox_RX2?
---> System.Data.SqlClient.SqlException: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteXmlReader()
at Microsoft.Adapters.Sql.ExecutionHelper.ExecuteXmlReader(SqlCommand sqlCommand, Double totalSeconds)
at Microsoft.Adapters.Sql.SqlAdapterInboundHandler.Polling_TryReceive(TimeoutHelper timeoutHelper, Message& wcfMessage)
at Microsoft.Adapters.Sql.SqlAdapterInboundHandler.TryReceive(TimeSpan timeout, Message& message, IInboundReply& reply)
--- End of inner exception stack trace ---
at Microsoft.ServiceModel.Channels.Common.Channels.AdapterInputChannel.EndTryReceive(IAsyncResult result, Message& message)
at System.ServiceModel.Dispatcher.InputChannelBinder.EndTryReceive(IAsyncResult result, RequestContext& requestContext)
at System.ServiceModel.Dispatcher.ErrorHandlingReceiver.EndTryReceive(IAsyncResult result, RequestContext& requestContext)".

1) Do you have the same Credentials settings for all 3 Receive Locations (Found under Configure | Other | Credentials on you WCF-SQL Adapter)
2) Are all 3 Receive Locations Locations polling from the same SQL Server? If not are they then on the same domain? If the server that is failing is not on the same domain as your BizTalk Host User, then you might need to supply credentials and use a local
SQL User.
Morten la Cour

Polling using WCF SQL Adapter

Hi - I have to develop this in BizTalk
There is a table in SQL database where BizTalk needs to poll the data using WCF SQL Adapter.
How and what query/stored proc do I need to write ?
and how about polling interval should I mention.
Is there any detailed blog or link which clearly explains this, will be helpful
MBH

The first thing that you should remember is that the most effective way of getting data from SQL would be if you could remove the records after reading them. This was something that the native SQL Server adapter supported. For WCF-SQL, the way to achieve
this is to
Create a SP which is what you will specify as the execute statement for your adapter. This SP would, on the basis of TOP 1, get the ID, read the record and delete it. Then it would return the read data. You will generate schemas for this SP and deploy them
for subscribing to the received messages.
You will create a query that returns the count of records from the said table which you will use as the polling query. This will ensure that the adapter uses this on the configured interval to see if data exists. If it exists, it would use the execute statement
(invoking your SP) to get the data.
There is an option to keep executing the SP while data is available. This ensures that if more than ONE record is inserted into your table, all the records would be picked up after the first polling interval (as opposed to poll, pick-up one, poll and then
pick up the other, etc.). Be careful while setting the polling interval (you cannot go beyond 1 sec) since this depends on your SQL servers ability to process the data.
With regards to documentation, I'd refer you to
http://msdn.microsoft.com/en-us/library/dd788532.aspx - Polling SQL Server by using the WCF-SQL Adapter.
Regards.

WCF-SQL Adapter Set up

Hi,
I am using Microsoft Biztalk 2010 on Windows Server 2007(SP2). I am want to use WCF-SQL adapter but I am not able to see any adapter when I tried to create new adapter at "Platform Setting -> Adapter -> New Adapter dropdown.".
Windows Communication Foundation LOB Adapter SDK, Microsoft Biztalk Adapter Pack, Microsoft Biztalk Adapter Pack(x64) are installed on my machine.
Am I missing something? how to get the WCF-SQL in the list of adapter.
Thanks, Girish R. Patil.

Hi Girish,
Another area to check is machine.config file for binding entries.
check following for hint : http://tech-findings.blogspot.in/2013/06/no-valid-adapters-installed-on-machine.html
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level

Polling records from mulitiple table(61 Tables) using WCF-SQL adapter

Hi,
I would like get some suggestion from this forum. I've a scenario, in which I need to poll the records from multiple table(61) which are related and may have one to many relationship. what's the best way to poll the records from SQL table to BizTalk.
Thanks in advance..
Regards,
Karthick

Karthick,
Write a SQL stored procedure with joins from your 61 tables (!!!) . Use WCF-SQL adapter to invoke the procedures.
Following references shall help you:
Executing Stored Procedures in SQL Server by Using BizTalk Server
Performing Composite Operations on SQL Server by Using BizTalk Server
Bing-Results: biztalk wcf sql
adapter polling stored procedure
I don’t know your exact requirement. Consider using SQL-SSIS for ETL process depending on your requirements. Anyway if your requirement really needs BizTalk, above suggest
should solve your problem.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Adding wcf-sql adapter

Please suggest how to add the wcf-sql adapter to biztalk application.

you first need to configure handler for wcf-sql adapter.
open admin console, goto platform settings, expand adapters, and select wcf-sql adapter. and right click on it, and then create receive/send handlers for it.
if you don't see wcf-sql adapter in adapter section, it means that you did not install wcf-sql adapter components.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How do you configure a WCF-SQL adapter to write data from a SQL2012 "always on" database?

Hi All,
I have a BizTalk environment. I have to write the data from BizTalk to the database which is configured using ALWAYS ON availability group.
I use WCF-SQL adapter to write the data. My question is this setup a supported?

The answer is NO.
Refer: Can
I use a BizTalk WCF-SQL send adapter with a SQL 2012 Always on Database?
A snippet quoted below.
In summary (in order of preference):
Disable AlwaysOn Availability Groups / Mirroring on SQL server if you need to connect to this SQL server which has this enabled
Disable transactions and implement logic to be able to handle duplicates .
Disable transactions and handle the duplicates or lost messages with custom logic (e.g. Send twice and compare and implement error handling). You need to write your own DTC handling this which
is probably very complicated.
Disable transactions and live with risk of duplicates or lost messages without handling duplicates.
Refer: SQL Server AlwaysOn feature does not support MSDTC transactions.
Rachit
Please mark as answer or vote as helpful if my reply does

I have selected 'Show on edit details page' for the property 'Status Message' for the User Profile Service, yet i do not see the property.

I would like to have the ability for the user to edit the property 'Status Message'. In the properties it says that it should be available in the details section however I am not seeing it there. Does anyone know if I might have something set
incorrectly or is this expected behavior.
Steven Albrecht
University of Colorado Denver
Steven Albrecht

Hi Steven,
For this issue, I'm trying to involve someone familiar with this topic to further
look at it.
Thanks,
Eric Tao
TechNet Community Support

This is a workaround for the MBP wireless issue

There have been many topics on the MBP wireless issues already, but I thought some people might find this workaround helpful.
Firstly, my system is a 2.2Ghz MBP, running 10.4.10, and also airport extreme update 2007-04. I am using an airport express base station. My previous Powerbook never had any wireless problems, so I really couldn't blame the basestation for the MBPs poor wireless.
Warning - The workaround requires a little bit of work in the terminal. A little bit of understanding of how networks work is assumed here as well. So it is probably not for everyone ...
What I have observed - whenever the MBP loses connection, the airport basestation IP and MAC addresses are missing from the ARP table.
- To view the ARP table, type (in a terminal window) arp -a.
So, when the MBP wireless hangs, open up the terminal and type that in.
Do a Cntrl-C if the arp command is hanging and not returning anything.
In normal situations, a list of IP addresses and MAC addresses will show up.
As others have already noted, clicking on the airport icon in the menubar, will magically bring the wireless back to life. When this happens, the ARP table also gets magically populated correctly. Coincidence? I think not!
So, the workaround is to store a PERMANENT entry in the ARP table for the airport basestation IP and MAC address. In my case, I can use the Airport Utility software to confirm what the basestation IP and MAC addresses are (note MAC address = Airport ID in Airport Utility). I found the basestation IP=10.0.1.1 and the MAC=0:11:24:07:d7:f
To create a permanent ARP table entry for my airport basestation, I opened up a terminal window, and did the following -
1) login to my administrator account
2) type in the following command sudo arp -s 10.0.1.1 0:11:24:7:d7:f
3) type in my administrator password to authorise the change
4) type in (to confirm the changes have been made) arp -a
5) logout of my administrator account (from the terminal)
Ever since I did this, my MBP wireless performance has been flawless.
Note, if you shutdown or restart your computer, the arp entry disappears. This is ok for me as I hardly ever power down my MBP. As insurance I have added an account startup item to remind me to do the arp table entry.
This workaround is great for me because I don't have a need to use multiple wireless networks. It might not be practical for people who roam around onto different networks.
Give it a go and see if it works for you.
Message was edited by: michael louey

OK, after some further experimenting, I changed the multicast rate on my airport express. It was set at 6Mbps, and I changed it to 2Mbps.
I have read that the default multicast rate for previous 802.11g versions of Airport basestations is actually 2mbps. Excellent results so far !! I have set up a terminal command to continuously ping my airport router address every 15 sec, and there have been virtually no dropped packets so far over many hours.
ping -i 15 10.0.1.1
Interestingly, in Apple's Airport Admin software in my MBP there is no option to set the rate at less than 6Mbps (!!!!), so I had to use the Windows XP version of Airport admin software to make this change using a windows machine. Using the XP software you can set the muticast rate as low as 1Mbps.
If you are using Apples airport admin software (Tiger and Leopard) and you commit any sort of change in settings, the multicast rate will be re-set at a minimum of 6Mbps. My understanding of the multicast rate is that setting it too high is similar to shrinking the coverage area of the basestation, and limiting access only to clients who can transmit at the required multicast rate.
So my new theory is that the dropouts are caused by the MBP dropping off the airport due to not being able to achieve the set multicast rate. (this could be due to factors such as low signal strength, excessive interference or noise).
If you are using Apples more recent Airport admin software, you are having a minimum 6mbps muticast rate set, and this might be too high for your particular environment.
Just a theory.
(oh yeah, I enabled interference robustness on the MBP and the basestation just for good measure)

For the property PollingStatement issue in WCF-SQL adapter

Similar Messages

Maybe you are looking for