For third party email users
AKA anything that isn't @verizon.net (ie @hotmail.com, @juno.com)
Verizon is blocking port 25, please check: http://www22.verizon.com/ResidentialHelp/HighSpeed/General+Support/Top+Questions/QuestionsOne/124274...
Reason: Most common email viruses are sent using port 25 to infect computers. Often times the user never knows their computer has been infected. In order to protect our customers, Verizon has turned off the ability to send email using port 25 for all users other than those using a @verizon.net email address.
They give some step by step instructions for anyone who are using a third party email here: http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/124333.htm
Just an FYI if your non Verizon email suddenly stops working in outlook, macmail etc. Simply change the outgoing smtp port from 25 to 587. You won't notice any difference.
Just thought I'd give everyone a heads up if you didn't know about this.
I have a non-verizon email account, and must run everything through the verizon server. I have changed the smtp port to 587, I have it marked to authenticate. The outgoing server is smtp.vzwmail.net I still cannot send email. I can receive, but not send. Can anyone help?
Similar Messages
-
User Exit for third party order processes.Missing in ECC 6.
Hi All,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Could anyone please let me know how I can resolve this issue as I need this User exit for my requirement. Has SAP provided any enhancement spots for this?
I tried to search the enhancement spots and OSS notes but couldnu2019t get any useful information.
Please advice.
Thanks,
Ameeshachanged our requirement
-
Port 25/587 and third-party email account
Like many who have posted notes about the Port change and third-party email accounts, I have read everything related to these changes and still cannot figure out how to adjust my settings so that I can send email from my third-party email account. In June, I switched to Verizon DSL from a cable service, which was very slow. "Slow" is now looking a lot more appealing than not being able to send email through my third-party account.
I have a Verizon email account, which I use with friends and family. I have another account that I have had for over ten years. I used the latter account as my only account for many years and that is the email address on my business cards. I will continue to use the third-party account as my business account, so hopefully someone can walk me through the change process so I don't need to switch providers.
I use Outlook for all my email. What do I need to change so that I can continue to use Verizon to send all my emails?
My POP3 settings include User Information (my name as it appears to recipients and my email address), Logon Information (user name and password), and Server Information (Incoming mail server [POP3] and Outgoing mail server [SMTP]).
What should appear in each of these so I can send email from my third-party account? Let's say my third-party email address is [email protected] User information is then my name and my email address ([email protected]). Logon information is then what? My abc.net user name and password? My verizon.net user name and password? Some combination of these? How about the Server information? Is my POP3 relay.abc.net or incoming.verizon.net? (I think it's the former for incoming.) Is my SMTP relay.abc.net on Port 587? Is it outgoing.verizon.net on Port 25? Something else?
I know this is long, but I have really tried to follow all the instructions Verizon gives and I still cannot send email from my abc.net account.
Thanks.
Solved!
Go to Solution.It really depends on whether your 3rd-party provider allows port 587 to be used. If they have a different alternate port you should be able to use that also. Verizon is *only* blocking port 25. Port 587 is just the default "other" SMTP port, so it's the alternate port for most providers, but not all. If you cannot get these settings to work, your other option is to set up Verizon for your outgoing server.
For the sake of example, we are going to pretend that we are setting up your fictional account. Using "[email protected]" as the 3rd party address and "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
The settings for using Verizon's servers would be:
Incoming Server: relay.abc.net (or whatever your 3rd party server is) - For this server you set up everything according to your domain's settings.
Reply Address: [email protected]
Outgoing Server: outgoing.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): No
Port: 25 (although 587 also works.)
These settings should work unless you have a Verizon/Yahoo account, in which case the outgoing server name is: outgoing.yahoo.verizon.net
Hope this helps. If you still have questions, please let me know.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having." -
How do I use Thunderbird to send third-party email through Verizon SMTP?
What exact settings do I need to select in Thunderbird for outgoing email in order send email? I have a third-party email address, not Yahoo or Verizon.
Based on other posts, I have set:
server name: outgoing.verizon.net
port: 587
CHECKED 'use name and password'
username: entered verizon username
use secure connection: 'no'
When I try to send email, I get prompted for password multiple times, then ultimately get "Send Message Error" - 'Sending of message failed. The message could not be sent because connecting to SMTP server outgoing.verizon.net failed...'Your verizon.net password is not necessarily the same as your .com password. I have downloaded Thunderbird and tested send/receive using the verizon.net outgoing server and it works just fine, so it is something in the settings you are using.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having." -
Third party system user click the url iam getting error?in sap crm IC
Hi Team,
I have given URL to Thrid Party systems.user clicks the link,then he enter the password and username then its getting error like as below..Please help here what settings we need to do.
Third party system user clicks the URL link ,after entering username password Iam getting error ?
Thanks
KalpanaHI Team,
I have added the parameter crm-ext-integration=true , or we need to any settings for this..Could you please help here..
Error: TO help protect the security of information you enter into this website,the publisher of this
content does not allow it to be displayed in a frame
Thanks
Kalpana -
Risk Analysis for Third party ERP system
We want to perform offline risk analysis for third party ERP(SRM) system.... We have already GRC system installed with Global rule set for SAP ERP & want to have another ruleset for offline risk analysis.
Just would like to have a confirmation for below steps & estimated time for this.
Activities Need to be performed from Our side(Client) :-
1) Send the RAR format for Users/Roles/Actions & Permissions.
2) Cross Verify the format.
3) Create the connector for stored files.
4) Upload the files via Data Extraction utility.
5) Generate the ruleset for SRM(third party).
6) Schedule the various background jobs.
Activities Need to be Performed from Third Party - HUBWOO(Owns SRM ERP system) :-
1) Convert users/action/roles and permissions files to RAR format.
Activities need to be Performed from SAP :-
1) Provide the ruleset for HUBWOO SRM system.
Please let me know if I missed any step above & estimated time to complete from our end & did anyone has come across ruleset for HUBWOO system..?
Thanks in Advance!!Thanks all for your reply,
Alpesh, but still I have small concern here, when SAP provide the ruleset files, it also provides for Oracle, People soft & JDE ERP.
Though these are also third party ERP's for SAP...?
Does it mean that we can'task for ruleset for other third party ERP from SAP...? or does SAP Charge something for it..?
Thanks -
Multiple POs for Third Party Purchase Requisitions
Hi
I Created a Sale Order for Third Party Item Category (Two line items). It generated one Purchase Requisition and two line items. Now I want to convert these two line items in a PR into two Purchase Orders (ME59N). For One line item PO created successfully. For the Second PO I am getting the following error message.
User XXX (My ID) already processing Purchase Requisition XXXXX 00010.
What could be the root cause for this error?
Regards
Hari.Hi Hari,
I think you are missing Note 1558299 on your system. Also Note 903884 might solve the problem although the description does not match.
1558299 ME21 does not set a lock on purchase requisition
903884 ME59N: Lock problems with subcontracting reqs from PP
Regards,
Purnima -
I recently changed all my Bookmarks to sites that are exceptions for third party cookies and turned off the acceptance of third party cookies. Facebook will not update any "likes" I get until after I reload the page. It also will not allow me to upload pictures, it says that I am not logged in which is really odd. Is this because I have switched to the https://facebook .com?
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
Help!!! Entourage 08' At&t Uverse Third Party Email Setup
I have a macbook and use Entourage 08' for my emails. I started a new job today and am trying to add my new work email address to entourage. I have tried everything, read every forum, and even my IT guy at work cannot figure it out. I can use either POP or IMAP and would prefer IMAP. How do I set up this new third party email because I have Uverse as my internet provider and do not want to pay the Techconnect fees? In the meantime, I am being forced to use webmail. Any thoughts or help at all?
AT&T U-Verse (uverse), as of July 2014, requires that you verify your non-AT&T mail accounts before they allow you to send outgoing non-AT&T mail.
Here's how to verify your non-AT&T mail accounts and link them to your AT&T U-verse account
https://discussions.apple.com/message/22291865
Log into your AT&T U-verse webmail att.net email account (e.g. Yahoo mail)
> click the gear at upper right of screen next to your name
Navigate to Settings > Accounts > Add
Add your non-AT&T mail accounts/ Enter info they require
U-verse will send a verification email to those mail accounts.
After you reply and verify your identity, you will be able to send outgoing email for those accounts via Mail, so long
as you have Mail configured. -
Sync third party email accounts to iOS
Hello guys,
does anybody know how to sync third party email accouns to ios since itunes can't do it? Is there an app for this? I have a bunch of mail accounts on my mac and don't want to enter them on every ios device manually.
pserikI have a bunch of mail accounts on my mac and don't want to enter them on every ios device manually.
That's the only way to do it. -
Plant Determination for Third Party Material as Child Item in Sales Order
Hi All,
We have an issue with the Plant Determination for Third Party Material as Child Item in a Sales Order.
Even when a Delivering Plant is maintained for the child item which is a Third Party Material, the plant of the Parent Item is only populated as the Default plant in the Sales Order
Can someone explain the reason behiind this determination.
P.S.- For all non -Third PartyChild Items (with non-Third Party Item Catefory & Material Type), the Plant is population correctly as per Delivering plant in Material Master.
TIA.
Regards,
SridharHi,
Thanks everyone for the feedback.I agree with Samir Danish.It is a standard functionality of SAP which does not allow free goods for BOM material.
However, can someone suggest work around to deal with this issue.I mean if any one has been doing any work around for this issue then please let me know.It s becoming critical for me.
Regards,
BM -
PO document type for third party PO...?
Hello friends,
My client's requirement is that third party PO should have different document type, say ZTRD?
I tried to configure the same with PR and PO doc types. I created new PO type ZTRD. I maintained the combination of PR doc type NB with item cat S to PO doc type ZTRD with item cat S. I also deleted the standard config i.e. combination PR doc type NB with item cat S to PO doc type NB with item cat S.
I created third party SO which created third party PR (doc type NB). But when I tried to convert this PR into PO, still with above config, I am getting error - Doc. type/item cat. NB/S (requisition) <-> NB/S (purch. order) error.
Please help me to configure the Z doc type for third party PO.
Thanks in Advance,
Pat.Hi
Please try the following, do not delete the standard settings
1) Create Z document type for PR and assign this document type to relevant Schedule line Category ( CS for example) in SD
2) Create Z document type for PO and keep only Item category S & Z document type for the Item category S created for PR.
Hope it helps.
Thanks/Karthik -
PO Creation for third party sales
Hi
We have the scenario Third party sales and High sea sales which is already in use (already configured) , where PR getting generated automatically .
But client requirement is they want the PO to generate automatically by the system the moment i save the sales order .
Where is the setting in the SAP , where system will generate the PO automatically instead of PR
Please suggestHi,
Go to VOV7
Select third party item category which u r using in sales order >>> Deatils >>> under transaction flow >>> Tickmark to CREATE PO AUTOMATIC.
If you activate this field, the system automatically generates both a purchase order requisition for third-party schedule lines as well as a purchase order in the background when you save the sales order.
However u can not create PO directly.
Kapil -
Logical Sys Name for Business system in SLD for Third Party
Hi !!
I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
thanks
GowriHi Gowri,
sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
Regards,
Udo -
Process demand for third party direct shipment
Hello ,
I need help in below given areas. in our rollout client is given statement of work like this.
1) Demand transfer to vendors
2) Reminder processing
3) Process demand for third party direct shipment
Please can you explain me about these area, how it works with example. it is very benificial for us.
Regards
sapmanHi Sapera,
There can be 3 typse of trading scenarios
1. 3rd party with Shipping notification : Where in u create sales order and create PO against the PR which si triggered in SAles order adn hen MIGO followed by MIRO and Billing. Here Billing to the end customer can be doen before MIRO because the billign quantity considered is based on the goods Receipt( MIGO) quantity. Many a times you might have your personnels or soem mechanisms to cross verify the delivered quanity as some times the vendor might not dispatch the quantiy in the PO. Here the MIGO doen si consumption posting/Non valuated GR as physically it doenot come into your stock and therefore is not shown in our stock. ITem category used in TAS
2. 3rd party without shiiping notfication ; Here MIGO is not done and billig ncan be done only after MIRO as the billing quantity is based on the Invocie receipt quantity in MIRO
3. Bought in items/ Dealer Sales : Here you bring in the materials from the vendor to our depot plant and then dispatch it to the customer . Here PR is geenrated from sales order followed by PO and MIGO. After MIGO you have to do PGI followed by Billing. MIRO doesnot have any impact on the PGI or Billing. Item category used is TAB
But in all the three instancesthe configurational changes happen in schedule line cateogry and the account assignment which is maintiend in item category and for automatic determination of 2 different schedule line categories we need to maintian 2 different item categories alothough item category settings are almost the same.
Hope this was helpful in giving you some insights on the trading processes
Regards,
Nithin
Maybe you are looking for
-
CMOD exit_rsap_saplr_001 for transactional data ABAP CODE
Hi please confirm that you want to convey that i can write the actual code in CMOD exit_rsap_saplr_001 for transactional data?? if i put 20 data sources enhancement code in there is'nt that too bulky and will cause the failing all extractor if one co
-
Hi everybody, I am working in SAP 4.7 but when I go to transaction ML81N and I try to put an attachment, the system throws this message: Include file in PC application Try again?. I don´t understand what happens, because with other user that have SAP
-
Restrict the height of the xcelsius component
i create a text input component for xcelsius. i packeged it through addon manager. i want to restrict it's height . but i am not able to do it. when the user drag it it's size chages according to the user dragging area. Can any one help me Thanks in
-
Updating OpenSSL on Mac System version 10.6.8?
Does anyone have successfully updated OpenSSL on Snow Leopard thru the Terminal could post the steps here? The actual version of open SSL is OpenSSL 1.0.0e 6 Sep 2011 I am attempting to update to the openssl-1.0.1c I was trying to do the installation
-
How to restore older backups? I can only access the latest backup but I need the one before that.