For uml 295 what should the settings be, for use with windows 7?

I have a uml 295 mobile broadband device. About 90% of the time even though  the device says it is connected, when I  try to access the  internet I get a message that says "no internet connection".  I have  a windows 7 operating system.  I wonder if the settings on the device are wrong?  I didn't change any defaults or enter any other information under "settings". Do I need to do something else to make this work?

I don’t get an error message.  The broadband manager says that I’m connected and the timer is running.  But Internet explorer says “you are not connected to a network.” 
I wouldn’t describe this as “losing” the connection. After I click on “Connect”, the manager says it is connected but IE says I am not connected to a network, and mail program says it can’t contact servers.
I have 2 dell laptops with very similar factory supplied software (windows 7, McAfee antivirus) and the same thing happens on both computers.  I have a Novatel wireless broadband device that works great on both of these Dell laptop computers. 
I tried the UML295 on my Dell desktop and it seems to work fine there.  But that’s not where I want to use it.  Maybe the Dell laptops have some software properties that are incompatible with this device.

Similar Messages

  • What are the settings required for QM in procurement

    Hi Team,
    What are the settings required for QM in procurement. I have  set indicator for QM in procurement in QM view in material master.
    I am not clear about  following fields to be maintained in QM view.
    QM Control Key
    Certificate type
    Target QM system
    Tech. delivery terms Indicator.
    Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
    Thanks

    Hi,
    All meaning are
    QM Control Key :
    If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
    Certificate type :
    Certificate types applies to the Certificate processing in procurement  &  Certificate creation
    Target QM system :
    whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
    -  If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
    -  If you want Vendor's perticular certificate for Material then you have to define Certificate type.
    Also, you have to maintain Material, Vendor's Info record at plant level.
    Thanks,
    JM

  • My sound no longer works on my Apple 5c cell phone.  What should the settings be?

    My sound no longer works on my phone.  What should the settings be?

    What do you by "what should the settings be?  Volume is either up or down.

  • What version of firefox can I use with windows me?

    What version of Firefox can I use with windows me? Where can I get it?

    Firefox 3.0 versions and later do not work on the Windows 98/ME platform
    *http://www.mozilla.com/en-US/firefox/system-requirements.html - Mozilla Firefox 3.6 System Requirements
    Firefox 2.0.0.20 is the last release that runs on the Windows 98 and Windows ME platform.
    * https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/win32/en-US/

  • What should the settings in Preview be if scanning documents and the faxing them

    I'm trying to scan documents using preview and my printer. Once I scan the documents, I save them in dropbox and later fax them using SFax. However, the faxes are coming out blurry and very difficult to read. What should the Preview settings be on? PDF? File Format? How many dots per inch? What are standard settings?

    I am a recently retired webmaster and fortunately have fewer eye problems than most people my age. I have astigmatism and, in common with most people over 40, have reduced accommodation. Perhaps because I have spent considerable time in front of computer screens my eyes focus most easily at screen distance. I use low power long distance glasses to watch television and drive after dark. I use low power reading glasses for small print such as maps and repairing small items. Most of the time I don't need glasses.
    There is no such thing as standard settings for font size or style. It is entirely a matter of personal preference.
    Here are my settings:
    34cm x 27cm Apple Studio Display set to millions of colours and a resolution of 1280 x 1024
    Safari 'standard' font set to Geneva 14
    Safari fixed width font set to Courier 14
    Default encoding set to Western (ISO Latin 1)
    Minimum font size set to 10
    Geneva is a very old Apple font optimised for screen use. I still find it more readable than other fonts under a wide range of conditions.
    I assume you know about Zoom settings to override the above:
    cmd + to increase size
    cmd - to decrease size
    cmd 0 to return to 'normal' size
    I set 'Zoom Text Only' on the view menu.
    You can also create your own style sheet to obtain even more control. Here is a Google search link about these:
    https://encrypted.google.com/search?q=browser+%27style+sheet%27+%27visually+impa ired%27&as_qdr=all&newwindow=1&num=100
    I have written many style sheets but not for visually impaired. I am happy to assist if required.

  • What are the settings to for best quality video for playback on computer?

    I'm not having any software or hardware issues.   I have tried differnent combinations using AVI, MPEG and WMV and I'm still not satisfied with the quality.
    I have used the same settings as my original video and it still is no where near the quality.  Maybe this is as good as it gets, any help would be appreciated.
    quick rundown
    I'm using the recorder on my computer to record my screen and voice to create video tutorials for my students to watch on-line.  This creates a 720x480 AVI file and has good quality.

    What is the best preset to use for HD-lite?
    The best is one that matches the Source Footage 100%. Unfortunately, with that variation on HD, I do not think that PrE, even PrE 10, will be able to come close. PrPro, however, does have the ability to do Custom Sequences (think a bunch of mini-Projects inside of a Project), and one can match odd Frame Sizes, FPS, etc.. I was hoping that PrE 10 would have Custom Presets, but it did not show up. This limits PrE to standard Frame Sizes, which is not what most video screen capture programs offer. Your footage does not match to any real HD-Lite Frame Sizes, so you will still have the same problem.
    It does appear that your program, while different than the TechSmith Camtasia, does use the TSCC CODEC. This will give you a bit more info. Also, though you do not have Camtasia, or CamStudio, I think that the article, that I linked to above, might be of use.
    Now, what options does your video capture program offer for output?
    Good luck,
    Hunt

  • Where on the Mac can I find the math symbol for Pi. Ie. what is the Unicode number for Pi.?

    Where on the Mac can I find the math symbol for Pi?
    Ie. what is the Unicode number for Pi.?
    I am using system 10.6.8
    Jubbjubb.

    Jubbjubb wrote:
    Where on the Mac can I find the math symbol for Pi?
    On the US keyboard layout, alt/option + p = π

  • What is the best programme to use with iwatermark or similiar copyright software

    I want to watermark my photos, I have been told iwatermark is real good but can someone tell me what is the best app to use in conjunction with copyrighting or watermarking sofware.
    Thanks

    It’s really a personal choice. I’ve recently bought a new Dell. Like you I was not interested in the consumer products so I purchased a business spec machine and I’m very happy with it. It’s Dell Precision T3600 with Intel Xeon CPU and Nvidia Quadro 2000 graphics card. Running Windows 7 Pro 64 bit with 8gb RAM. I got 1TB and 500gb drives both 7500 rpm with a 3TB Seagate external HD. I gave SSD a miss until prices drop further. I don’t think the extra speed is that relevant to Photo editing although perhaps more relevant to video rendering. I’m also not gaming or running other apps that might benefit from an SSD. Photoshop Elements is a 32 bit program which runs well on 64 bit systems but cant use more than 1.5 to 2GB of RAM. Premiere Elements has 64 bit support and can therefore take advantage of the extra RAM. At the end of the day it’s your choice.

  • What should Ram settings be for FCP 6 doing a slideshow with JPEGS ?

    Hi all,
    I am doing a Ken Burns effect slideshow in FCP6 that is using JPEGS only.
    I have the 24" intel imac 2.4 gig with 4 gigs of Ram installed.
    I am wondering what my ram settings in FCP should be.
    there are 4 boxes you can fiddle with the numbers.
    first two have sliders and go from 0 to 100%
    "memory usage"
    and also still cache...
    what should I be setting these to?
    thanks in advance!
    I ask because my system bogs right down with only a few layers and effects in place.
    what should my sequence settings be as well when working only with JPEG?
    I normally edit in easy DV NTSC....

    Thanks guys.
    I have found that I cannot resize and get a clean movement here in FCP.
    I tried the cutting approach jim and that at least got me through the placement of the pics to the song and then I started the motions. I also checked and then unchecked the shadow once I had it set where I wanted. I like to work through each pic from start to finish so i know exactly where I am at each night when I go to bed and then where I start again the next evening after my day job!
    haha
    but yes unchecking the shadows and feathered edges definately bought me some more time before render.
    I appreciate all the helpful advise here. You guys pour so much knowledge out there for us and mostly without even much thanks to you in return.
    One question I would still have now that I have fiddled around with all my settings....
    would anyone have the time and the knowledge to help me figure out what the "proper" settings should be for my setup for editing regular sd dv ntsc footage?
    or when I click easy setup dv ntsc does it configure my system for optimal settings each time?
    ie what should my ram settings be?
    thanks in advance.
    see sig for setup.

  • I'm ready for 10.5 - what should I back up for a clean install?

    Hello
    I'm ready to install my newly-purchased 10.5 DVD.
    I want to do a clean install. What should I back up before I do so in order to insure that nothing is lost?
    I have already copied my entire user folder (except for the items that were permissions locked) to an external 500GB firewire. What else should I copy and how?
    Thanks,
    -----------S

    OK, your user folder is backed up. That's a good start.
    Generally what I do is take the current hard drive out of the computer, and put in a blank one (preferably a bigger drive too!).
    Leopard's kind of an iffy upgrade, so what I'd do is this:
    1) Make a clean install of TIGER. Run the updates.
    2) Install all applications using a new user called "Administrator"—I mean anything you can think of....MacTheRipper, VLC, etc. Everything. Update all the apps.
    3a) Copy over your user folder into the Users folder in the root of the drive. Go to Accounts in the System Preferences, and click on the + sign beneath the Users, and add a user with the same name and type in the same name you used on your old build. Enter the same short name, password, etc. It will give you the option to restore that user account if it is seen there.
    OR
    3b) Create a new user account, and start up in that user account. Copy pictures, music, documents, and desktop from the old user to their respective folders in the new location. DO NOT START UP MAIL, ADDRESS BOOK, or iCAL BEFORE THIS! Go to your User account's library. Move Mail & Safari from the old user library to the new one. Go to Application Support, and move over the files for Address Book and iCal (Yahoo Messenger, Skype, and Firefox are other ones to move if you have them in there). Go back to the User Library, and move over com.apple plists (from Preferences) for Addressbook, iChat, iCal, Mail, Safari. Try each of those applications to make sure the data transferred.
    4) Repair Permissions.
    Now you have a clean build of TIGER. SuperDuper it so you have a bootable backup of your new system on an empty firewire drive.
    5) Update from Tiger to Panther. Play with it for a while. See how you like it. If you like it, keep it and move on from there. If you don't, you have a clean build of Tiger to use. I'm reverting back to Tiger because Panther is kind of slow on my machine, and it offers few real advantages. It's worth sticking to Tiger for me until I get through my current work cycle and hope Apple has fixed a few issues by then.
    Good luck.

  • What is the proper resolution to use with bootcamp and Windows 7 on a Macbook Pro Retina?

    Hi All,
    Let me start by saying I have read numerous articles and blog posts about choosing the correct resolution to use when running Windows 7 via Bootcamp on a MacBook Pro Retina (15").  I have not found the "silver bullet" (correct resolution).  My eyes are sensitive to displays that are running in non-native resolutions (scaling). 
    When running the display in native resolution  (2880x1800) everything looks great, except that icons and text are way too small to read.  I have played with the zoom settings (150%, etc.).
    When using any scaled resolutions, the display doesn't look as crisp and I get eye fatigue.  I have also tried Windows 8, with the same results (no surprise).
    I would love to use this Macbook to run Windows 7 because the hardware is great, but it looks like I may have to switch back to Dell/Lenovo/HP. 
    Is there a proper or "best practice" resolution to run at in this scenario?  I want to give it one last try before putting the laptop away...
    Thanks for any help!
    Andrew

    While I've never seen retina display, if you have not tried Hi-Contrast in Windows, you might find settings with it that are comforatable.
    This is set with desktop rightclick->Personalize. You can vary desktop icon size in the View option above Personalize.
    You can change most of what you see in Windows foreground/background colours & text with high contrast settings.
    Also, text size in Windows browsers is variable with the Control an + and - key combo.
    If the display you use is small maybe an external 24" or 27" monitor, if possible, would alleviate problem.
    The attached pics are expadable by double click.

  • What is the best stylus to use with the iPad Air?

    I'm looking for a stylus to use for the iPad Air to use for sketching and just simple note taking And from the reviews I've read it sounded like the Adonit Jot Pro for 29.99 seemed like a good deal to use for the iPad Air. I'm also a worrywart about if it will harm the screen? So I'm looking for someone's review with their experience using "The Adonit Jot Pro on the iPad Air." Thanks so much For your time and review!

    I've never had a problem with it. I like it a lot for writing. I like the very fine point. I don't know as it's a great stylus for sketching, though. I tend to do most of my sketching in the app Paper with their Pencil stylus.
    When using any stylus, it's good practice to make sure there are no bits of grit on the screen before using. If they should become trapped between the stylus tip and the screen, you could get scratches.

  • What is the best keyboard to use with my iPad?

    I'd like use a keyboard for typing on my iPad. What are the best options?
    Thanks, Steve.

    Zagg has a new Bluetooth keyboard for the iPad2 and other devices;
    http://www.zagg.com/accessories/zaggkeys-flex-tablet-keyboard-stand.php

  • What is the best projector to use with a macbook air

    Need a trouble free projector to use with my macbook air for showing photos and business documents , excel eyc.

    If you don't mind connecting the projector directly to the Mac with an HDMI cable, any projector with an HDMI input will work. There are a very large variety to choose from. Projector People is a competent vendor that I have used and can recommend. They are knowledgeable about Macs. Describe your needs and they will make recommendations. Their prices are as good as you are likely to find anywhere else.
    You will also need a Thunderbolt to HDMI adapter. Purchase one from Monoprice. They are less than $10.

  • 1. Will CAL Licenses works if i use Windows Server 2012? 2. What GB of RAM can be used with Windows Server 2008 Standard Edition?

    I have been using Windows Server 2008 Standard Edition for my business purpose and there are at-least 30 Users who logged in into the server Via Remotely from different location. I want to upgrade my server with latest one with some extra cores and RAM for
    better and smooth operations for all users. So, i have a doubt whether my CAL Licenses will works with Windows Server 2012 or i need to purchase the new one for the same? 
    Moreover, if i don't upgrade my Windows to any 2012 edition and stay on 2008 Standard Edition how much maximum RAM can be installed at a time? is there any limitations? if Yes, please let me know how do i upgrade my Windows 2008 Standard Edition to any other
    business edition to avoid such limitations of RAM?
    Waiting for your favorable and quick response. 

    Hi again,
    th eupgrade optiuon from Standard 2008 to Enterprise 2008 was only available for customers with open value contract with activ esoftware assurance then they can purchase the step up license from Standard to Enterprise.
    the only way to have the Enterprise 2008 Edition is to make th edowngrad efrom 2012 Standard to 2008 Enterprise. it means that if you purchase the 2012 R2 Standard Edition, you may downgarde to Enterprise 2008/2008 R2. th ebest way to make the downgrade
    to 2008 R2 Enterprise is to purchase the current Version 2012 R2 Standard in volume licensing than you can download diretly from VLSC the Enterprise Edition.
    with your downgrade you can still using the 2008 CALs.
    thanks
    diramoh

Maybe you are looking for