Force a new line when editing a SMS

Does anybody know how I can force a new line when editing a SMS for instance,
Starting the SMS with:
Dear xxx
Now I start editing the SMS on a new line....
Solved!
Go to Solution.

Press the 0 button 3x times quickly usually works for me.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

Similar Messages

  • Text continues moving horizontally rather than starting a new line in editable text field

    I am trying to make a feed backbox for visitors on my website. I have made the editable text field and scroll bar and set all of my preferences, but when the typing reaches the border on the right of the text field it just continues to type further horizontaly. I can start a new line by pressing enter but I would like it to start a new line on its own when it reaches the boundary. Any help is appreciated.

    assign your textfield's wordWrap property to true.

  • Force Windows New Line Character

    Hi,
    I've a problem with new line character. I am in Windows platform but
    when I write a file with a BufferedWitter with println I obtain the
    character "\n" x0D like separator (Unix Separator). My System property
    line.separator is "\r\n".
    Can someone tell me how can I obtain files with the correct \r\n
    Windows new line character?.
    Thanks in advance.

    Resolved
    The problem was another process that automatically was replacing "\r\n" form "\n" and I don�t know it.
    All works fine.
    Thanks a lot.

  • Tabs disappear and open a new window when editing files in Wordpress

    When editing files in Wordpress built-in code editor, if I highlight and try to copy/paste to another file or even within the same file the tab I am on will often abruptly close and then reopen itself in a whole new window. This is extremely disruptive. I have to close the window that popped open and go back to my browser instance with the open tabs and create a new tab for that page then restore my tabs in their previous order. The have to do it all over again a few minutes later.
    Never had any type of trouble like this with previous versions of Firefox, and nothing else has changed on this PC.

    Hi Nicolas,
    I don't know about a pop-up, but if you are trying to open a page (page 2) in a new window (internet explorer window), then do the following:
    Instead of using a navigate pushbutton, use a hyperlink component.
    In the URL selection option insert the URL (web address) of page 2. You can find the URL by going to SE80, in the repository browser select "BSP Application" and "THE TECHNICAL NAME OF YOUR BPS". Open your BSP and go to the folder "pages with flow logic" and find your "page 2". Double click on your page and then select the "properties" tab and navigate to the bottom where you will see the pages URL.
    Insert this URL address into your hyperlink component back in the Web Interface Builder.
    Leave the Target selection as parent. Make sure your internet explorer enhanced options are set to "not reuse the same window" under the browser options.
    Good luck.
    Rael

  • Tab going to a new line when end of line is reached

    In most text editors, when you hold the tab key down, the cursor goes from tab stop to tab stop across the line. When end of the line is reached, the cursor goes to the next line, again goes from tab stop to tab stop on the new line, and so on. You end up with multiple lines.
    In TLF, with tabStops set, holding the tab key down, the cursor goes from tab stop to tab stop across the line. But when the cursor reaches the end of the line, it doesn't go to the next line. The cursor stays at the end of the line while more tab characters are inserted into the text flow. There is always only one line.
    Is there a way for TLF to have the tab key go to the next line when the cursor reaches the end of the line?
    Thanks for the info.
    Will

    Thank you very much for the update.
    We also discovered that, any line which has the previous line ending in a tab, any leading tabs will not show. For example (all in the same <p>):
    Line one ...<tab/>
    <tab/>Line two
    The leading tab on line two will not display. If the previous line does not end with <tab/>, then the leading tab on the following line shows. Is this related?
    Also, will the fix come in a 2.x update? Any time frame?
    Thanks again for the info.
    Will

  • Need to print new line when "," in string

    Hi,
    I have a string having value 12,221,23,67...
    I need to print a new line after ", "
    i;e 12
    221
    23
    67....
    Please suggest.
    Thanks,
    Ajit

    Hi Team ,
    its done.
    I have used chr 13, chr10 and it print new lines for me
    v_serial_num:=v_serial_num||','||CHR(13) || CHR(10)||rec.SERIAL_NUMBER;
    Thanks,
    Ajit

  • How to make new-line when printing strings?

    Please help me with code . I can't able to print the string in new line
    Anil

    ... the same question as your other post:
    Printing the string

  • Have a discontinued calling plan. Will I be forced into new plan when my contract is up next month?

    I looked around for the answer, but couldn't find it.
    I have an old plan, "family national freedom 900", with two lines on it.  The total is 59.99 + 9.99 (talk only, no texting). My contract ends 9/29.  We have two samsung hues.
    When my contract ends next month, will I be forced to change to one of the new, more expensive family plans?
    Both phones are eligibe for Ne2.  I'd like to get a droid2, and I understand that I'd have to do the data plan for 29.99, and I'd be happy keeing the hue for the other phone (or we could upgrade it to another feature phone that does not require a data plan), but I'd really like to be able to keep my current calling plan.  Any idea if this will work?  Should I just hold off on upgrading until I know what is going to happen with my plan?

    You may want to ask this on the Alltel board  - Former Alltel Customer Assistance - (if you haven't already) where those more familiar with Alltel, the changeover, and all the nuances and ramifications can give you a better answer.  It may be possible to do what you want and still keep your Alltel plan, but my guess is you would be switched to a Verizon plan.
    The closest would be the Talk plan for 69.99 for 700 minutes (same price, but fewer minutes) and then add the data plan for the Droid 2.  If you do not upgrade, you will be able to keep your plan indefinitely.  When you do upgrade, most likely you will need to change your plan to a Verizon one...there are some people that have kept their Alltel calling plans with smartphones though, so it IS possible. I'm not sure of the details of the plans and phones involved though....

  • I get unwanted duplicate lines when editing the data content of my JTable

    I have created an editable JTable (filled with data from an SQL) with a modified instance of AbstractDataModel.
    I have a phenomenon that I cannot explain nor fix: each time I edit a data field in the JTable and press ENTER or leave the field, the edited line is duplicated. The extra content is not sent to my SQL (if I recreate the table everything is fine, except that certainly the changed value is lost). The problem must come from the Java code.
    Ok, I admit, that I am not a Java pro and might have made a really stupid error, but I cannot find it.
    Has someone already seen such a behavior?
    Thanks
    CCH
    Message was edited by:
    CCHuser

    Now we are drifting away a little from Java and start getting into philosophy ... :-) But one last reply I will do:
    I agree that just playing around with the fuse box is dangerous and brings no benefit. But I am not that unknowing in Java... Technically saying I work in IT, but just not as a programmer but rather as a business consultant (I write the functional concepts that later the programmers have to implement and then I have to talk to them to fix functional errors and do the testing). Besides, I hold an official Java Programmer degree. But when not programming professionally and continuously gaining experience, it is very hard to keep your skill up. Therefore I do one or another hobby project with Java that I could also do better and faster with other tools such as Excel, Access or a simple batch job.
    My concept for trying new things is to get a piece of code from the internet from which I assume I know roughly what it does. Then I use it in my programs, and while altering it to my needs, I continuously keep searching in API, documentation and tutorials or simple trial and error to get better insight into the details.
    And as a scientist you know what I mean when I say that if I try something new, I simply accept for certain details that they work without knowing how. And over time I then take the time for the "how". Many famous people made their inventions by trial and error and while then testing their new observation and changing the surrounding conditions found out why they work. Not that I would claim for myself to be anything close to a genius inventor but I found that the approach works for me to advance in my insights of a solution.
    Sincerely CCH
    Message was edited by:
    CCHuser

  • Return key not creating a new line when using the horizontal text tool

    Going through the adobe after effects 'classroom in a book' examples - when writing a line of single line using the horizontal text tool pressing return does not create the next line underneath, the cursor stays on the same line?
    Anybody out there had this problem?

    Hi Bill
    Thanks for replying!
    My OS is windows 7. I think it is the first time I have needed to put more than one line of text in an after effects layer. I am new to CS5.5 - after effects and I'm going through an adobe tutorial  'classroom in a book' series book.
    I thought about using a paragraph text box as you suggest but could not find the function in the tools menu.
    I have since tried clearing the cache out and restoring default layout but with no joy.
    I have used the return key for multiple line text in premier pro and it works perfectly ok.
    Cheers,
    Alan

  • How to gettext from textarea in a new line when the linewrap option is true

    Hello everyone..
    I wanted to know that how get we get text from the Jtextarea when the linewrap option is set to true..
    for example..
    Lets say my textarea can have 50 chars without any kind of wrap..
    now when the 51 st char is pressed or entered it automatically goes to the next line..
    now i want to get the text from the textarea and display it in the exact fashion as it is in the textarea..
    Please help me out in this case..

    This can help, if not, take a JTextPane. In my program,
    I get all lines (including wrapped ones) with that
    I hope, there are no indexing or so errors, I had to adapt my code
    a bit.
    View root =
    myJTextComponent.getUI().getRootView(myJTextComponent).getView(0);
    int number_of_paragraphs = root.getViewCount();
    int linestart, lineend;
    String line;
    for(int paragraphindex = 0; paragraphindex< number_of_paragraphs;
    paragraphindex++)
         for(int line_in_paragaph = 0; line_in_paragraph <          
         root.getView(paragraphindex).getViewCount(); line_in_paragraph++)
         linestart =   root.getView(paragraphindex).getView(line_in_paragraph).getStartOffset();
         lineend=
         root.getView(paragraphindex).getView(line_in_paragraph).getEndOffset();
            try
            line = myJTextComponent.getDocument().getText(linestart,
            lineend-linestart);
            System.out.println(line);
            catch(BadLocationException e) {...}
    }

  • Issue with new line when manually executing a procedure in SQL*Plus

    The below procedure works fine in SQL*Plus when the entire EXEC <procedure_name> (parameter1, parameter2, ..); is put in a single line
    SQL > exec cust_admin_util.create_schema (P_SCHEMA_NAME => 'SCOTT_01', P_SCHEMA_PWD => 'scott123', P_TBS_NAME => 'TRAG_TBS', p_temptbs_name => 'TEMP' );
    PL/SQL procedure successfully completed.I wanted to execute the same procedure with more readability. So, I put each parameters on a separate line and try to execute. But it is erroring out.
    SQL > exec cust_admin_util.create_schema
    P_SCHEMA_NAME => 'TESTUSR_01',
    P_SCHEMA_PWD => 'scott123',
    P_TBS_NAME => 'TRAG_TBS',
    p_temptbs_name => 'TEMP'
    );BEGIN cust_admin_util.create_schema; END;
    ERROR at line 1:
    ORA-06550: line 1, column 7:
    PLS-00306: wrong number or types of arguments in call to 'CREATE_SCHEMA'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    SQL >   2    3    4    5    6    7
    P_SCHEMA_NAME => 'TESTUSR_01',
    ERROR at line 2:
    ORA-00928: missing SELECT keywordAny workaround for this ?

    Hi Tom,
    At SQL Plus,
    You have to use the -(Hyphen) as the concatenation Operator.
    For Instance,
    SQL>  exec host_command( -
    p_command => 'dir');
    PL/SQL procedure successfully completed.
    Thanks,
    Shankar                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • New line problem in sending sms through SAP

    Hi all,
    I need to send sms through sap. I have a code working fine.
    constants: c_tab type c value cl_abap_char_utilities=>NEWLINE.
    concatenate 'Sales INFO-' date3  into line1 separated by space.
      move 'Order Input' to line2.
      concatenate 'Day: Rs.' day_oamt   into line3 separated by space.
      concatenate 'MTH: Rs.' month_oamt into line4 separated by space.
      concatenate 'YTD: Rs.' yord       into line5 separated by space.
      move 'Billing' to line6.
      concatenate 'Day: Rs.' day_bamt   into line7 separated by space.
      concatenate 'MTH: Rs.' month_bamt into line8 separated by space.
      concatenate 'YTD: Rs.' ybill      into line9 separated by space.
    concatenate line1 line2 line3 line4 line5 line6 line7 line8 line9 into text separated by C_TAB
    concatenate '+91' m_no+len(10) into m_no.
    'http://************************************='
      M_NO
      '&msg='
       text
        '&************************************************=text'
       inTO WF_STRING.
    CALL METHOD cl_http_client=>create_by_url
        EXPORTING
          url                = wf_string
        IMPORTING
          client             = http_client
        EXCEPTIONS
          argument_not_found = 1
          plugin_not_active  = 2
          internal_error     = 3
          OTHERS             = 4.
      CALL METHOD http_client->send
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2.
      CALL METHOD http_client->receive
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2
          http_processing_failed     = 3.
      CLEAR result .
      result = http_client->response->get_cdata( ).
    I am able to send the message but it gets displayed in one line.
    SALES INFO- <dd.mm.yyyy> Order Input DAY: Rs.123 MTH: Rs.123 YTD: Rs.123 Billing DAY: Rs.123 MTH: Rs.123 YTD: Rs.123
    What I need to do is this.
    SALES INFO- <dd.mm.yyyy>
    Order Input
    DAY: Rs.123
    MTH: Rs.123
    YTD: Rs.123
    Billing
    DAY: Rs.123
    MTH: Rs.123
    YTD: Rs.123

    Have you tried with line feed?
    i.e.
    instead of:
    constants: c_tab type c value cl_abap_char_utilities=>NEWLINE.
    try:
    constants: c_tab type c value cl_abap_char_utilities=>CR_LF.

  • Elements 13 - leaves black spots & lines when editing

    Elements 13 Spot Healing Tool - freezes & leaves black spot on image in Photoshop Elements
    Julie Law asked1 month ago
    I am using Elements 13 on a Mac, doing substantial spot healing in restoring old images.
    The healing tool regularly seems to have a delay in responding and then leaves a dark spot on the image.  When I 'undo' to remove it, the spot occasionally extends down to the bottom right with a smudged line.
    Is this happening to anyone else?
    Any tips on how to prevent this?

  • How do i create a new line when writing to file

    I am trying to write a few stings to a file but i cant get them to print on seperate lines. They all end up together. I tried to include the \n in the string but that didnt work. Any suggestions? I thought that this part would be simple.

    http://forum.java.sun.com/thread.jsp?forum=54&thread=450725&tstart=0&trange=15

Maybe you are looking for

  • Exception while a session been lookup on weblogic 10.3.3 using wlclient.jar

    Hi, I am upgrading to weblogic 10.3.3. I have a client that downloads the required to the client machines using Java web start 6. I am using wlclient.jar at the client side. When I am trying to lookup for a session bean it is throwing the below excep

  • Issues Loading 'Rented Movies' on to iPhone 3G

    When trying to load 2 recently downloaded movies, getting error message that basically says it is 'INVALID' (and that's it). I have been able to load 'rented' movies before with no issues. Any help that can provided will be greatly appreciated. Thank

  • Oblix v7 audit log file missing

    Hi, I'm using oblix v7. I have enabled audit logs and specified the file name as: C:\audit33.txt But on the machine there is no such file. It is somehow missing. The same configuration works on another machine. Any idea why the audit log file is miss

  • Videos erased

    I tried to watch my tv shows on my video iPod, and they were all erased. They're still in my library, but I can't get them on my iPod. I also downloaded some video Podcasts and I can't get them on my iPod.

  • Obtaining a TTL input signal via DIO lines of 7334

    Hi How can I obtain a TTl input signal from a source via the DIO lines of the 7334 . Thanks Mal