Form boxes... how to adjust?

I am creating a form. But for some reason, when I create a text box on the pdf, it seems to snap to some invisible guides... I can't just make the box any size and place it anywhere I want it to go. I HAVE done just that in the past, so something must have changed. Is there a preference... sort of a "snap to grid" type thing that I can change? Thanks!
Julie

Just go to View > Snap to Grid. Then either check it or uncheck it depending on what you're looking for.

Similar Messages

SAPScript: how tu adjust heigh and width of standard text (logo)?

Hi!
how to adjust heigh and width of standard text (logo)?
I do not want to edit the logo, because it is used elsewhere, so I need to adjust heigh and width when using it in a form.
For now stadard text comes over the window. Here is how I use it:
INCLUDE ZHEX-LOGO OBJECT TEXT ID ST
Will reward,
Mindaugas

Hi Mindaugas,
While uploading using RSTXLDMC. You have to maintain your size of the logo.
Go through below mentioned document.
Upload TIFF files to SAPscript texts
Description
The report RSTXLDMC allows a TIFF graphics file to be uploaded from the file system of the R/3 GUI to a standard text in the R/3 word processor SAPscript. (TIFF is a registered trademark of the Aldus Corporation.)
When uploading, the TIFF graphic is converted either into a black and white raster image (parameter type=BMON ) or as a color raster image with a maximum of 256 colors (parameter type=BCOL).
The black and white raster images ( BMON) can be printed using the following printer types:
PCL-5 printer
PostScript printer
Kyocera PRESCRIBE printer
Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95)
The color raster images (BCOL) can be printed using the following printer types:
PCL-5 printer with color capability (e.g. HP Color LaserJet). Color graphics are not printed properly on monochrome PCL-5 printers (e.g. HP LaserJet 5), because the printer cannot set the color palette as required and does not perform any gray-level conversion.
PostScript printer (color graphics are automatically converted to gray levels on black and white printers using PostScript) Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95) During TIFF graphic import, the basic set " Baseline TIFF 6.0 " of the TIFF specification 6.0 is supported.
To maintain compatibility with earlier versions of the report RSTXLDMC, it is also possible to convert the TIFF graphic directly into a black and white raster image for a particular printer type when uploading. These are the three printer types PCL-5 (parameter type=PCL ), PostScript (parameter type=POST) and Kyocera PRESCRIBE (parameter type=PRES ). A raster image uploaded in this manner can only be printed using the appropriate printer type.
Besides TIFF raster graphics, direct printer commands in the respective printer language (PCL-5, PostScript or Prescribe) can also be contained in the file which is to be uploaded (printer macros). They are then transferred to the standard text unmodified.
The graphics are output by inserting the standard text into the document which is to be printed, directly or using an INCLUDE command. The printer commands, which for example draw a company logo on the page, are only output if the print request is processed by the printer driver corresponding to the macro type, otherwise they are ignored. Example: A macro of type PCL is contained in a print request. If the request is output to a printer with type HPLJIIID (to which the driver HPL2 is assigned), the macro data is sent to the printer. If the request is printed on a printer of type POSTSCPT (to which the driver POST is assigned), the output of the macro data is suppressed.
In the standard text, the printer commands are inserted between the HEX ... ENDHEX command lines in hex notation. Various report parameters allow the graphic or printer macro to be placed on the page or at the current text position. Note: When the /:HEX command line which precedes the macro appears in the text, a line break is generally made before the graphic is output. The output of the macro therefore begins in the next text line at the left window border of the current page window, as long as a shift to the right is not specified (see below).
If your own printer macros are uploaded and not TIFF files, you must ensure yourself that the normal (text) output of the driver is not impaired when the printer commands are inserted in the output from the uploaded file. The printer drivers pass the data contained in the file to the printer unmodified, therefore without control over the individual actions this triggers on the printer. For example, syntax errors should not be generated by the PostScript commands (type POST), or form feeds should not be contained in the file (unless this was intended) for PCL-5 (type PCL).
Restrictions:
In general, the output of graphics generated via RSTXLDMC from R/3 is not suitable for mass printing (that is, unless you are using the "Graphic resident on printer" feature): the R/3 spooler has to hold significantly more data in its output files. If the graphics occur several times in a spool request, the data also reoccurs. Apart from this, the network is more heavily loaded in sending the increased volume of data to the printer and the printer output is slowed significantly (varies according to printer model) if raster graphics are output as well as the text.
If your graphics reside on your printer during a printing job, the degree of 'correctness' with which they are printed depends on the amount of memory available in your printer. R/3 print drivers are unable to determine whether the amount of memory available is enough! If one of the graphics that you have marked as resident is not displayed, try reloading the graphic and switching off the parameter "Graphic resident on printer".
When printing black and white graphics on PCL-5 printers, image data is compressed in order to greatly reduce the file size.
The output of graphics and macros on PCL-5 printers, PostScript printers and device type SAPWIN (type BMON, BCOL, PCL, POST) is adapted to the page orientation used, that is if landscape is used instead of portrait, the graphic is also turned when output. This is not the case for the PRESCRIBE printers (type BMON, PRES)! With these printers, the graphic is not automatically turned when landscape is used, but appears on the page in the identical position as for portrait. You are therefore recommended not to output raster images when printing in landscape on PRESCRIBE printers.
PRESCRIBE printers do not support the resolutions 200 and 600 dots per inch when printing raster images.
Not all PCL-5 compatible printers support the resolutions 200 and 600 dots per inch when printing raster images.
TIFF graphics with compression type 2 ("CCITT Group 3 1-Dimensional Modified Huffman run length encoding ") can currently not be imported although this is a component of the Baseline TIFF 6.0 specification for monochrome images.
Color TIFF graphics with full color representation (ie. a lot more than 256 colors) are automatically converted into 256 gray levels when uploading with type BCOL.
When TIFF graphics are converted to black and white raster images (type BMON, PCL, POST, PRES) there is no default simulation of gray levels or colors of the original image on the printer (for example, by using different tones of gray). Each pixel of the original image is converted to a white or black pixel on the printer according to its intensity value.
The parameter "Number of TIFF gray levels" does, however, allow a simulation of gray/colour tones of the original image through levels of gray on the printer, when using type PCL, POST or PRES. This parameter is ignored for type BMON.
The conversion of TIFF graphics can be so time-consuming that it is recommendable to execute the report RSTXLDMC in batch processing. Note: in batch, the file is always read from the file system of the application server (ie. not from the file system of the GUI).
The length of an individual text in the text file is limited. When importing TIFF graphics with very large dimensions, especially if more than 2 gray levels are used, a termination can therefore occur when saving the standard text ("EXPORT_TOO_MUCH_DATA"). This restriction can only be avoided by reducing the TIFF graphics. Note: The display of a raster image in Postscript or PRESCRIBE format needs from two to three times as much space as displaying in PCL-5.
When processing very large TIFF images on PostScript printers, a print termination can occur with PS error message "limitcheck". In this case the internal memory of the printer is insufficient to scale the required raster image. This implementation limit cannot be influenced by changing the report parameters when importing.
Requirement
The file which is to be uploaded can contain the following formats/ commands:
Baseline TIFF 6.0 raster image files. The image information of the TIFF file is converted into black and white/color raster images when uploading. Note: As the TIFF format allows a variety of variants, only a basic set of TIFF 6.0 formats is supported here described in the TIFF 6.0 specification as Baseline TIFF 6.0.
PCL : PCL-5, Hewlett Packard Printer Control Language 5 for HP LaserJet 3, 4, 5 series and compatible printers. The data is output by the printer driver HPL2 only.
PRES: Kyocera PRESCRIBE for Kyocera laser printers. The data is output by the printer driver PRES only.
POST: Adobe PostScript or EPS format (encapsulated PostScript ) for PostScript printers. The data is output by the printer driver POST only. In the upload, one of the end-of-file markers (CTRL-D, hex $04) which may be contained in the PostScript file is not transferred.
For PostScript files which contain a bounding box entry (for example, all EPS files) the macro/graphic can be scaled to a size specified by the user. In this case, a small lead text and trailer are generated by the report for the macro data and inserted in the standard text.
Parameters of RSTXLDMC
File name
Path and file name of the file to be uploaded in the file system of the R/3 frontend (dialog processing) or in the file system of the application server (batch processing)
Type
Way which the data contained in the file is to be converted. Possible values are BMON, BCOL, PCL, POST and PRES. With parameter values BMON and BCOL, a TIFF 6.0 file is expected. This is converted into either a black and white raster image (BMON) or a color raster image (BCOL). These raster images are printer-independent and can be printed using various printer types (see above).
With parameter values PCL, POST and PRES, either a TIFF 6.0 file or a file with printer commands in the appropriate printer langauge is expected. If the file is a TIFF file, it is converted into a black and white raster image for the printer type specified in the parameter. The presence of a TIFF file is recognized automatically. If the file is not a TIFF file, the file contents are regarded as the printer macro of the respective type. Data loaded with type PCL, POST or PRES can only be printed on the respective printer type.
Resolution for TIFF raster images
Resolution which should be used when importing a TIFF raster image, in dots per inch (dpi). If an allowed value is entered here, this overrides the resolution information in the TIFF file. The allowed values are:
75 dpi
100 dpi
150 dpi
200 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
300 dpi
600 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
Changing the resolution affects the size of the graphic on the printer. If a resolution of 300 dpi is stated in the TIFF file and this parameter is set to 75 dpi, the graphic is four times as big when printed as at the outset.
Note: Kyocera PRESCRIBE printers do not support 200 and 600 dpi resolutions.
Note: Not all PCL-5 printers support resolutions 200 and 600 dpi, for example HP LaserJet 3 series does not, but LaserJet 4 and 5 series do.
Graphic Resident on Printer
Normally, graphics that occur more than once in a printing job (a company logo that appears on each page, for example) are sent to the printer repeatedly each time they are needed. In order to avoid this kind of redundancy, you can select this checkbox on the selection screen. The R/3 print driver then stores the graphic in the printer's memory and the printer retrieves the 'resident' graphic memory every time that re-occurs in your job.
Caution: Whether or not the printer correctly reproduces the graphic depends on the amount of memory available in the printer during the printing job! You should avoid using this feature with color graphics since they take up a lot more memory than monochrome graphics.
This parameter can only be used with types "BMON" and "BCOL".
Absolute positioning
Determines whether the macro/graphic is positioned absolutely or is to be output at the current text position. If this checkbox is selected, the graphic is positioned absolutely (parameters "X-position" and "Y-position" are used), if this checkbox is not selected, the graphic is positioned at the current text position (parameters "Reserved height" and "Shift to right" are used)
Absolute X-position
Horizontal position (space from left border) of the macro/graphic, if absolute positioning is required. This is the parameter XPOS of the HEX command.
Absolute Y-position
Vertical position (space from upper border) of the macro/graphic, if absolute positioning is required. This is the parameter YPOS of the HEX command.
Reserve height automatically
If this checkbox is selected, the system automatically inserts the actual height of the graphic during printing into the subsequent "Reserved height" parameter.
Reserved height
If positioned at the current text position, this parameter specifies the horizontal spacing to be reserved for the macro/graphic, which must not be printed with text from the paragraph. This is the parameter HEIGHT of the HEX command.
Shift to right
If positioned at the current text position, this parameter specifies the space between the left border of the macro/graphic and the left border of the page window. If this value is increased, the macro/graphic is shifted to the right. This is the parameter LEFT of the HEX command.
Unit of measurement for positioning
The unit of measurement in which the position values (X,Y, height, shift) are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
Text title
Comment used for the attribute "Title" of the standard text generated as well as as a comment line in the text itself
Line width
Number of columns to be used in the standard text when generating the HEX...ENDHEX command lines. The default value is 132
Text name
Name of the standard text to be generated. If an * character occurs in the name, it is replaced by the value of the parameter "Printer type". For example, if the entry is ZHEX-IMAGE1-* and the printer type = PCL, the text name ZHEX-IMAGE1-PCL is generated. The default value for the name is ZHEX-MACRO-<printer type>, but the standard text can be named as required (take into account customer reserve). Standard texts are client-dependent!
Note: The name of a standard text can be up to 32 characters long !
Text ID
ID of the standard text to be generated. The default value is ST (general standard texts)
Text language
Language key of the standard text to be generated. The default value is the logon language
PostScript scaling
Flag which determines how the macros/graphics of type POST are handled. If set to 'X', the report expects a PostScript comment line in the file
%%BoundingBox llx lly urx ury (e.g. %%BoundingBox -1.5 0 21.4 14.1)
as present, for example, in all EPS files, in which the dimensions and the position of the macro/graphic are specified (if a bounding box comment is not included, 0 0 1 1 is assumed as the default value). This information is then used by the report to insert PostScript commands which scale the macro/graphic to the size specified in the parameters "Width" and "Height" (listed below).
If the flag is set to ' ' (blank), the PostScript file is transferred to the standard text without any additions (any transformations to the coordinate system used by the printer driver must already be contained in the file).
The flag must be set to 'X' for the import of TIFF files for type POST.
Width according to PS scaling
Required width of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
Height according to PS scaling
Required height of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
If you want to scale the PostScript graphic with these parameters, one of the two values, width or height, can be specified with zero. The graphic is then scaled so that the width-to-height ratio remains unchanged and the original graphic is not distorted.
Unit of measurement for PS scaling
Unit of measurement in which the parameters "Width" and "Height" are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
Number of TIFF gray levels
Number of gray tones which are to be used on the printer for displaying the original image. Note: This parameter is only evaluated when using types PCL, POST or PRES!
Possible values are 2,4,9. With the default value 2, each pixel of the original image is converted either to a white or a black pixel on the printer. With the value 4, each pixel of the original image is converted on the printer with 4 pixels, which simulate 4 different gray levels. With the value 9, each pixel of the original image is converted on the printer with 9 pixels which simulate 9 different gray levels.
Note: With values 4 or 9 the resolution of the image is doubled or tripled. The restrictions on the possible resolutions (see previous parameter) then apply for the resulting resolution.
Output
Individual steps of the upload procedure are logged in the report list generated and, if necessary, errors reported. The uploading of TIFF graphics, in particular, is cancelled if there is a variant which is not supported. A message to this effect is then issued. If execution is successful, the report generates a standard text with the key specified in the parameters. If the standard text already exists, a window appears with a warning before the text is overwritten.
Regards,
Ameer Baba.

On Ibooks Author, my programmed image for the Chapter page no longer shows up on new pages, just appears as a question mark inside a box, How do I fix this?

On Ibooks Author, my programmed image for the Chapter page no longer shows up on new pages, just appears as a question mark inside a box, How do I fix this? Please help, its the same when I try and copy and paste the same image within Ibooks author.

https://discussions.apple.com/message/24420017#24420017
You may have moved or removed content on your page or its possible you used the"Adjust Image" and over sharpeed one or more images.
I assume you mean it does not show up of new Chapter pages... have you checked the template?
Where you see the ? you need to either reduce teh box outline size - or drop anther copy of the original image onto it, it may fill the ? box or sit on top.... delete the ? box.
If its Chapter page only related, its better doing this in the template.
Is you image .jpg or .png?

How to adjust fields display width?

work in jdev 11.1.2.3.
in the form VISUAL DESIGNER, all fields looks same length, and there is no width attributes to adjust. When it runs, some fields display too long.
How to adjust fields display width during design?
Thanks.

Hi,
You dont need to redo it again , unless you have changed properties after initial drag and drop.
If you have changed , use the value #{bindings.yourAttribute.hints.displayWidth} for columns property.
<af:inputText value="#{bindings.name.inputValue}"
label="#{bindings.name.hints.label}"
required="#{bindings.name.hints.mandatory}"
*columns="#{bindings.name.hints.displayWidth}"*
maximumLength="#{bindings.name.hints.precision}"
shortDesc="#{bindings.name.hints.tooltip}" id="it38">
<f:validator binding="#{bindings.name.validator}"/>
</af:inputText>
Thanks,
Naresh

How to adjust brightness in windows vista?

I can't figure out how to adjust the screen brightness. On the mac osx install disc 1 which supposedly has all the drivers, it did not hve the mac keyboard driver or the nvidia graphics card driver either. I found latter on the internet without much hassle, but I can't find a keyboard driver anywhere, so I'm stuck with this full brightness screen that really burns my eyes out, as well as draining a lot battery power when unplugged from the mains.

If you are also an administrator on your account click the drop down box on the recovery menu where it says 'administrator' and see if your account is listed. If it's the only account listed have you tried entering no password?
If that fails then google for 'hirens boot cd' which has a reset tool for Vista on the CD.

User adding extra form boxes

Hello,
I'm not sure what the exact parlance is here but can anyone advise me on how about doing the following?
Like on many Airline websites the user can click a button to 'add another passager' or whatever and a new form box/form boxes pop-up underneath. I'm trying to do the same thing (but with adding food to a list) but also wondering the recommended way to do it.
I was thinking a bit of Javascript activated on click, to draw up a new form box in the form with a different ID/name to be posted through to the update page along with everything else. I'm still learning javascript - does anyone know a good tutorial for this? I would search myself but I'm not sure what this would come under.
Thanks
Chris

Found a tutorial that could help you. http://papermashup.com/dynamically-add-form-inputs-and-submit-using-jquery/

How to adjust the text in input field

Hi Expert,
New in VC development. Can someone guide how to adjust the text in input field? Because of long text length it is not displaying fully in visual composer iView so user are not able to see the entire text in input fields

HI Kundan,
I assume that you have already tried different options perent in Label Postion for the field.
If none of these options meet your requirement then you can try the following workaround:
In the display properties, select label position as no label.
In the form view add a new UI Control for Plain Text or HTML text and change its Label to "Material Number".
Now place this new UI Control in before your actual Input field such that it appears as the field label.
Hope this helps.
Regards,
Rk

Can't See Forms Box in Browsers

When on a website and a form comes up for me to fill in answers I cannot see the forms box I am to type answer/info in to. I just have to keep clicking in the general area till I get it to allow me to type. I have this problem in Safari and Firefox. What do I need to do? Is this a display setting in preferences?

How about ⌘/ - that's command slash -
Patrick

How to adjust column length in function REUSE_ALV_GRID_DISPLAY

Hi,
I am using this function REUSE_ALV_GRID_DISPLAY to display .Please tell how to adjust the column length in this function, so that it is set to default field name size.
thanks

Hi anu,
The column width can be adjusted by using the following method:
-> define layout of the type.
            data: it_layout type slis_layout_alv.
-> call the reuse alv... by using the is_layout field name with the above defined variable.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
    I_CALLBACK_PROGRAM                = <program that calls reuse>
    I_CALLBACK_PF_STATUS_SET          = < form to set pf-status>
    I_CALLBACK_USER_COMMAND           = <form to catch user command>
    I_STRUCTURE_NAME                  = < structure to be passed>
    I_GRID_TITLE            = < any title to appear on top of the grid display>
    IS_LAYOUT                         = it_layout
    IT_FIELDCAT                       = IT_FIELDCAT[]
    IT_EVENTS                         =
    IT_EVENT_EXIT                     = I_EVENT_EXIT < to capture exit event>
I_SCREEN_START_COLUMN             = 0 <screen settings>
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
   TABLES
    T_OUTTAB                          = IT_INACT_OBJ
   EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
-> write a form to set the layout of the grid...
*&      Form build_layout
      text
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname =      'LINE_COLOR'.
gd_layout-totals_only        = 'X'.
gd_layout-f2code            = 'DISP'. "Sets fcode for double click or "click(press f2)
gd_layout-group_change_edit = 'X'.
gd_layout-header_text       = 'helllllo'.
endform.                    " build_layout
endform.
This will optimize the output of the grid display.
Hope this helps!!!
Revert if any queries!!!
regards,
Naveenan.

Color samplers - dark, light & grey point - how to adjust curves

Hi all
I've set dark, light & grey point in an image. Wondering how to adjust the curves based on the color samplers. Manually i invoke the curve dialog box and select the dark pen and choose sampler no1, select light pen and choose sampler no2, select grey pen and choose sampler no3. Any idea how this can be done in script?

I’m stymied by the gray point at current, it does not seem to use the measured values directly.
The white and black points seem to be straightforward and can be set easily with a Script when one knows the values.
#target photoshop
var theArray = [[17, 224], [0, 255], [27, 215], [0, 255], [28, 206], [0, 255]];
rgbCurvesLayer (theArray);
////// make rgb curves layer //////
function rgbCurvesLayer (theArray) {
// =======================================================
var idMk = charIDToTypeID( "Mk " );
    var desc5 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref2 = new ActionReference();
        var idAdjL = charIDToTypeID( "AdjL" );
        ref2.putClass( idAdjL );
    desc5.putReference( idnull, ref2 );
    var idUsng = charIDToTypeID( "Usng" );
        var desc6 = new ActionDescriptor();
        var idType = charIDToTypeID( "Type" );
            var desc7 = new ActionDescriptor();
            var idpresetKind = stringIDToTypeID( "presetKind" );
            var idpresetKindType = stringIDToTypeID( "presetKindType" );
            var idpresetKindDefault = stringIDToTypeID( "presetKindDefault" );
            desc7.putEnumerated( idpresetKind, idpresetKindType, idpresetKindDefault );
        var idCrvs = charIDToTypeID( "Crvs" );
        desc6.putObject( idType, idCrvs, desc7 );
    var idAdjL = charIDToTypeID( "AdjL" );
    desc5.putObject( idUsng, idAdjL, desc6 );
executeAction( idMk, desc5, DialogModes.NO );
// =======================================================
var idsetd = charIDToTypeID( "setd" );
    var desc8 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref3 = new ActionReference();
        var idAdjL = charIDToTypeID( "AdjL" );
        var idOrdn = charIDToTypeID( "Ordn" );
        var idTrgt = charIDToTypeID( "Trgt" );
        ref3.putEnumerated( idAdjL, idOrdn, idTrgt );
    desc8.putReference( idnull, ref3 );
    var idT = charIDToTypeID( "T   " );
        var desc9 = new ActionDescriptor();
        var idpresetKind = stringIDToTypeID( "presetKind" );
        var idpresetKindType = stringIDToTypeID( "presetKindType" );
        var idpresetKindCustom = stringIDToTypeID( "presetKindCustom" );
        desc9.putEnumerated( idpresetKind, idpresetKindType, idpresetKindCustom );
        var idAdjs = charIDToTypeID( "Adjs" );
            var list1 = new ActionList();
                var desc10 = new ActionDescriptor();
                var idChnl = charIDToTypeID( "Chnl" );
                    var ref4 = new ActionReference();
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idRd = charIDToTypeID( "Rd " );
                    ref4.putEnumerated( idChnl, idChnl, idRd );
                desc10.putReference( idChnl, ref4 );
                var idCrv = charIDToTypeID( "Crv " );
                    var list2 = new ActionList();
// add r points;
for (var m = 0; m < theArray[0].length; m++) {
          addCurvePoint (list2, theArray[0][m], theArray[1][m])
                desc10.putList( idCrv, list2 );
            var idCrvA = charIDToTypeID( "CrvA" );
            list1.putObject( idCrvA, desc10 );
                var desc15 = new ActionDescriptor();
                var idChnl = charIDToTypeID( "Chnl" );
                    var ref5 = new ActionReference();
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idGrn = charIDToTypeID( "Grn " );
                    ref5.putEnumerated( idChnl, idChnl, idGrn );
                desc15.putReference( idChnl, ref5 );
                var idCrv = charIDToTypeID( "Crv " );
                    var list3 = new ActionList();
// add g points;
for (var m = 0; m < theArray[2].length; m++) {
          addCurvePoint (list3, theArray[2][m], theArray[3][m])
                desc15.putList( idCrv, list3 );
            var idCrvA = charIDToTypeID( "CrvA" );
            list1.putObject( idCrvA, desc15 );
                var desc20 = new ActionDescriptor();
                var idChnl = charIDToTypeID( "Chnl" );
                    var ref6 = new ActionReference();
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idBl = charIDToTypeID( "Bl " );
                    ref6.putEnumerated( idChnl, idChnl, idBl );
                desc20.putReference( idChnl, ref6 );
                var idCrv = charIDToTypeID( "Crv " );
                    var list4 = new ActionList();
// add b points;
for (var m = 0; m < theArray[4].length; m++) {
          addCurvePoint (list4, theArray[4][m], theArray[5][m])
                desc20.putList( idCrv, list4 );
            var idCrvA = charIDToTypeID( "CrvA" );
            list1.putObject( idCrvA, desc20 );
        desc9.putList( idAdjs, list1 );
    var idCrvs = charIDToTypeID( "Crvs" );
    desc8.putObject( idT, idCrvs, desc9 );
executeAction( idsetd, desc8, DialogModes.NO );
return app.activeDocument.activeLayer;
////// add curve point //////
function addCurvePoint (theList, valueHor, valueVer) {
var desc11 = new ActionDescriptor();
var idHrzn = charIDToTypeID( "Hrzn" );
desc11.putDouble( idHrzn, valueHor );
var idVrtc = charIDToTypeID( "Vrtc" );
desc11.putDouble( idVrtc, valueVer );
var idPnt = charIDToTypeID( "Pnt " );
theList.putObject( idPnt, desc11 );
Edit: I had assumed the gray point picker would set the input values of the point picked to output 127/127/127, but he operation seems to be quite different.

How to adjust Column width using SHD0 for FB60

Hi,
How can adjust ( i have to reduce the length) Assignment filed in the FB60 transaction using SHD0.
Please help in this regard.
Regards,
Kishore

HI,
I think you can adjust the column width and save it as Screen Variant in the SHD0.
When you create a screen variant for the MIRO, adjust your column width and position than save it the variant. Once you save and activate the variant, it will appear in the Layout dropdown box on MIRO.
OR
Please check in spro with ur functional consultant to explore if the field can be made not mandatory..
menu path:
AR and AP -> Customer Accounts -> Line Items -> Display line items -> display line items without ALV

How to adjust Minibar pane height in RH8 output

We use a skin to generate our webhelp project from RH8. Since the conversion to RH8 the Minibar is much 'higher' than from RH7.
I tried to do some simple edits in the attached skin (I renamed it to *.txt), but this hasn't helped. Does anyone know how to adjust the height of the minibar in a skin?
thanks,
Casper Lange

Hi there
I believe I've documented how to accomplish that in my Skinny on Skins file.
Click here to visit the page where you may download your own free copy of this file
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to adjust the blog thumbnail pic?

In iWeb08 if you drop a picture into a blog entry, it automatically shows up on the main blog page as a thumbnail which is great. The problem is how to adjust that thumbnail (position/size)? There seems to be no way?

Go to main blog page
click on photo (this will then expose a photo properties box)
Hope this helps

How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns.

How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns. Help please.

If you look closely at the top of the canvas pane, as you move either of the boxes (green or red) there is an indication of pixel positions... "top, bottom, left, right," and "scale."
Admittedly, it doesn't seem as if you can "enter" the dimensions with your keyboard, however, as you move the boxes, you have a real time indication of the boxs' locations.
(I couldn't take a screen shot, as you have to actively move the box with a mouse or other input device... thus, I could not also take a screen shot with same device.)
I hope this helps.

How to adjust the brightness of a second display connected to iMAC 2012 by Apple Mini DisplayPort to Dual-Link DVI Adapter?

How to adjust the brightness of a second display (Dell 3007WFPHC 2560x1600 dpi) connected to 27 inch iMAC 2012 through thunderbolt port by an Apple Mini Display Port to Dual-Link DVI Adapter?

Macs control computer by USB. With a non-Apple display, you will have to use the brightness control on the display.

HT1212 im locked out of my ipod, and the screen isnt responding when i go to swipe to unlock it or when i swipe to turn it off. But, in the top left hand corner, there is an outline of a box. how do i fix this

im locked out of my ipod, and the screen isnt responding when i go to swipe to unlock it or when i swipe to turn it off. All of my notifications are there but i cant reply to any of them. My screen is completly unresponsive. But, in the top left hand corner, there is an outline of a box. how do i fix this?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Form boxes... how to adjust?

Similar Messages

Maybe you are looking for