Form item from another table

I want to create a form that inserts rows in a table'mstr';
when inserting a row I want to have a field populated with
information from another table 'dept', where the department
in 'mstr' equals the dept in 'dept' table. How?

Write a database trigger to populate it.

Similar Messages

FETCHING VALUES IN MULTI RECORD BLOCK FROM ANOTHER TABLE USING SELECT STATEMENT.

Hi,
I have one multi record block in which i want to fetch values
(more then one record) from another table using select statement
IN KEY NEXT ITEM.I am getting following error.
ORA-01422: exact fetch returns more than requested number of rows
Thanks in advance.

In your case I see no reason to use non-database block and to try to populate it from a trigger with a query, instead of using the default forms functionality where you can associate the block and the fields with table, create where clause using bind variables and simply use execute_query() build-in to populate the block. The power of the forms is to use their build-in functionality to interact with the database.
Also, you can base your block on a query, not on a table and you dynamically change this query using set_block_property() build-in. You can use any dynamic queries (based on different data sources) and you simply need to control the column's data type, the number of the columns and their aliases. Something like creating inline views as a block data source.
However, you can replace the explicit cursor with implicit one like
go_block('non_db_block_name');
first_record();
FOR v_tab IN (SELECT *
FROM tab
WHERE col_name = :variable)
LOOP
:non_db_block_name.field1 := v_tab.col1;
:non_db_block_name.field2 := v_tab.col2;
next_record();
END LOOP;

Default value from another table - sql query

I'm trying to make the default value of a text item as the result from an sql or pl/sql statement. I keep getting errors when I try to use a pl/sql statement to do this. Has anyone else done this?

OK, here is what I tried to put in. I have a form and I wanted to add a text field that is derived from another table, such as:
select question from qa_main where seq=:quest_num
So, what I want is to have a form where questions on tests are answered, and I want the text of the question to be brought over from the question table. I'm not sure if I'm using the correct syntax, but the ":quest_num" would be a reference to a question number in the answer table that is linked to the sequence number (primary key) in the questions table.
Of course if there are better ideas, please let me know. :)

How to populate a table based on a row selection from another table.

Hi, i just started to use ADF BC and Faces. Could some one help me or point me a solution on the following scenario .
By using a search component , a table is being displayed as a search result. If i select any row in the resulted table , i need to populate an another table at the bottom of the same page from another view. These two tables are related by primary key . May i know how to populate a table based on a row selection from another table. Thanks
ganesh

I understand your requirement and the tutorial doesn't talk about Association between the views so that you can create a Master-Detail or in DB parlance, a Parent-Child relationship.
I will assume that we are dealing with two entities here: Department and Employees where a particular Department has many Employees and hence a Parent-Child relationship.
Firstly, you need to create an Association between the two Entities - Department and Employees. You can do that by right clicking on the model's entity and then associating the two entities with the appropriate key say, DepartmentId.
Once you have done that, you need to link the two entities in the View section with this Association that you created. Then go to AppModule and make sure that in the Available View Objects: 'EmployeesView' appears under 'DepartmentView' as "EmployeesView via <link you created>". Shuttle the 'DepartmentView' to the right, Data Model and then shuttle
"EmployeesView via <link you created>" to the right, Data Model under 'DepartmentView'.
This will then be reflected in your Data Controls. After that, you simply would have to drag this View into your page as a Master-Detail form...and then when you run this page, any row selected in the Master table, would display the data in the Detail table.
Also, refer to this link: [Master-Detail|http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html]
Hope this helps.

Create a new table from another table that exists ussing a stored procedure

Hi,
I want to know if is posibble to create a new table from another table that exists ussing a stored procedure. This new table is created from other table that exists in the DB.
(in the next code the table tbl1 exist into the schema of the DB, but temp_tbl1 does not exist, it must be created by the procedure)
create or replace procedute temp is
temp_tbl1 tbl1%TYPE; //the temp_tbl1 will have the same type of tbl1
begin
create table temp_tbl1 as (select * from tbl1);
end temp;
thanks very much

cat wrote:
Hello,
I think my problem is not about this grant, because if I execute this as an "anonymous procedure":
DECLARE
BEGIN
EXECUTE IMMEDIATE 'CREATE TABLE Abonus (id NUMBER, amt NUMBER)';
END;
It runs ok
But if I do:
CREATE OR REPLACE procedure temp as
BEGIN
EXECUTE IMMEDIATE 'CREATE TABLE Abonus (id NUMBER, amt NUMBER)';
END;
I have the error
ORA-01031: Insufficient privileges
ORA-06512: at "temp", line 3Anonymous blocks are treated as "Invoker's Rights" from a privilege perspective whereas stored programs by default are treated as "Definer's Rights". Therefore using anonymous blocks is not a valid test to check this.
The simplest form of checking this issue is by executing
SET ROLE NONE;and then to run your statement/code block in question interactively. Using this approach you get in your session the effective rights of a "Definer's Rights" stored program, i.e. only privileges that you got granted directly to your user.
You can revert to the default setting by issuing
SET ROLE ALL;For more information regarding this topic, read e.g. the documentation:
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/subprograms.htm#LNPLS00809
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Data from another table, to be displayed on table based screen

I have a block that is based on one table, if I found the record(s) on that table I will display it on the forms, No Problemo. But, if record(s) was not in the said table, I have to get the data on another table and then display it on the same forms. Is there someone who can show me how I can get the data from another table and display it on screen that is based on another table?

suppose you have 2 table emp_n and emp with same table structure
first check data from emp_n if not found then go to emp
try it:-
you will change block name at run time(query data source)
by
emp_n is old
emp is new
set_block_property('emp_n',QUERY_DATA_SOURCE_NAME,'emp');
if no data found in emp_n table then
change the block query name by
set_block_property('emp_n',QUERY_DATA_SOURCE_NAME,'emp');
in next try it will go to emp table for fetching record
kuljeet pal singh

I have a table with info and would like to select an item from that table

Hi
I have a table with info (course info that I searched for) and would like to select an item from that table to use for further use in my application.
It must work more or less like the tree structure where I can use an On Action select.
In other words; let say I am looking for all courses with "Advisor" it its descriptin / name, I want to click on one of the names and use it lets say to book people on.
Could some please assist me with this.
Regards
Debbie

Hi
The datasource for my table is the node searchcatalog. Under this node there is an attribute calles description where the items found are displayed.
I changed my code as follow:
data: ls_table type wd_This->Elements_searchcatalog,
      lr_element type ref to if_wd_context_element.
DATA lo_nd_searchcatalog TYPE REF TO if_wd_context_node.
DATA lo_el_searchcatalog TYPE REF TO if_wd_context_element.
DATA ls_searchcatalog TYPE wd_this->element_searchcatalog.
navigate from <CONTEXT> to <SEARCHCATALOG> via lead selection
lo_nd_searchcatalog = wd_context->get_child_node( name = wd_this->wdctx_searchcatalog ).
@TODO handle not set lead selection
IF lo_nd_searchcatalog IS INITIAL.
ENDIF.
get element via lead selection
lo_el_searchcatalog = lo_nd_searchcatalog->get_element( ).
@TODO handle not set lead selection
IF lo_el_searchcatalog IS INITIAL.
ENDIF.
get all declared attributes
lo_el_searchcatalog->get_static_attributes(
    IMPORTING
      static_attributes = ls_searchcatalog ).
lo_nd_searchcatalog->get_lead_selection->( exporting index = wdevent->index importing
element = lr_element ).
lr_element->get_static_attributes->( importing static_attributes = ls_table ).
wd_context->set_attribute( exporting name = 'SELECTED' value = ls_table-description ).
When I try to activate it errors with: List elements that take up more than one line is not allowed. This error at the sentence: lo_el_searchcatalog->get_static_attributes(
If you cannot assist me further I will understand. Thank you.

Looping delete statement where table name is coming from another table

Hi All,
We have to write code to delete records from active tables of WDSO.We have 5 DSO so inspite of writing delete statement for each table we want to put all table names into one table and then loop through it .but we are getting error when we are refering that table field which has active table name.error is :
"dictionary structure or table is either not active or does not exist "
As per my understanding in a delete /select /insert /update statement we need to put table name (whose field we are refering ) it can't be replaced by a variable .
ex: v_table = 'EMPLOYEE' .
DELETE FROMv_table WHERE EMP_NAME = 'ABDC' .
is wrong and it must be like
ex : DELETE FROM EMPLOYEE WHERE EMP_NAME = 'ABDC' .
but we want to make our code dynamic .
Can you please suggest a way so that we can read the table names from another table and delete data based on some selection fom those tables .
I tried variants ,perform etc and even searched FM for the same but not found a solution .Your help will be greatly appreciated .
Thanks in advance .
Regards,
Jaya

Hi,
You can change your statement as follows:
DELETE FROM (v_table) WHERE EMP_NAME = 'ABDC' .
However, I would not recommend this. There is a standard function module RSAN_ODS_DATA_DELETE which allows selective deletion - that should be a safer way to do this. You can

I can't create table from another table?

Hi everyone!
I have a problem that I don't known the reason why?
I'm using Oracle version 8i and I want to create a table from another table, such as:
     CREATE TABLE a_backup as SELECT * FROM a => It's OK, table a_backup is created.
But there is only a table that I can't created like that, such as:
     CREATE TABLE b_backup AS SELECT * FROM b;
When I run over command, SQL Plus is not responding... and clients are can't access to DB or Executing forever
This is the first time I met this problem.
Can Anyone help me to resolved it?
Thanks in advance!

xi`tin wrote:
Hi everyone!
I have a problem that I don't known the reason why?
I'm using Oracle version 8i and I want to create a table from another table, such as:You realize, of course, that 8i is completely out of support .... Is your OS and hardware just as old as your rdbms software, or is it only the rdbms that your company refuses to upgrade?
     CREATE TABLE a_backup as SELECT * FROM a => It's OK, table a_backup is created.
But there is only a table that I can't created like that, such as:
     CREATE TABLE b_backup AS SELECT * FROM b;
When I run over command, SQL Plus is not responding... and clients are can't access to DB or Executing forever
This is the first time I met this problem.
Can Anyone help me to resolved it?
Thanks in advance!

INSERTING INTO A TABLE FROM ANOTHER TABLE

Hi,
I am having a table called emp in which 5 columns are there, I want to insert some rows from another table called employees, only into three columns of emp table through a sub query.
Is this scenario is possible, I tried so many queries but it is not working out.
Can any body help me out.
The columns in emp table is
empno, ename, doj, designation, salary, deptno, mgrid
The columns in employees table is
empno, name, hiredate, post, salary, commission, deptno, mgr
I want to insert into empno, ename, doj, designation columns of emp table from the employees table empno, name, hiredate, post columns.
Ramesh.

It looks like your EMP table has 7 columns, not 5, and you want to insert into 4 columns, not 3.
insert into emp
(empno, ename, doj, designation)
select empno, name, hiredate, post
from employees;

SQL select a concatination of entries from another table

I am trying to select a few columns from one table and then add another column that is a concatination or names from another table that referances it as below. Is this possible to do in one select statement?
table x1
ID NAME
1 Bob
1 Tom
2 Bill
table x2
ID NAMES
1 Bob, Tom
2 Bill
3

You mean string aggregation?
If yes, then it is possible like this, if you are on 10g.
SQL> create table x1 (id,name)
2 as
3 select 1, 'Bob' from dual union all
4 select 1, 'Tom' from dual union all
5 select 2, 'Bill' from dual
6 /
Tabel is aangemaakt.
SQL> select id
2       , rtrim(n,', ') names
3    from ( select id
4                , n
5                , rn
6             from x1
7            model
8                  partition by (id)
9                  dimension by (row_number() over (partition by id order by null) rn)
10                  measures (cast(name as varchar2(20)) n)
11                  rules
12                  ( n[any] order by rn desc = n[cv()] || ', ' || n[cv()+1]
13                  )
14         )
15   where rn = 1
16 /
        ID NAMES
         1 Bob, Tom
         2 Bill
2 rijen zijn geselecteerd.There are several other (slower) techniques possible as well. You can find them by using the search function on this forum.
Regards,
Rob.

TEXT ITEM from different table

When a TEXT ITEM from different table exists in the DATA BLOCK,
and when after EXECUTE_QUERY (in trigger POST_QUERY) we issue
the SELECT for filling the TEXT ITEM from different table, how
we can prevent FROM_STATUS and RECORD_STATUS to get the
value "CHANGED" (because othervise COMMIT is updating all the
records which are the result of EXECUTE_QUERY)?

Set the record status back to query in Post Query trigger:
SET_RECORD_PROPERTY(:SYSTEM.TRIGGER_RECORD, 'BLOCK_NAME', STATUS
, QUERY_STATUS);

Create table from another table including constraints

Hi,
Is there a way to create a table from another table including constraints.
CREATE TABLE COPY_EMP
as
SELECT *
FROM EMP
WHERE 1 =2 ;
This creates the table, but the constraints are not copied over.
I was reading about DBMS_REDEFINITION - can that be used for this scenario ?
Thanks!
Anand

>
I tried that, but the constraint names are posing a problem. And unfortunately our constraints are not named in a standard, so am finding it difficult to replace them.
Was just wondering if there were any simpler approach to this.
>
No - there isn't.
You will have to use new names for the constraints. That usually means extracting the DDL and manually changing the constraint names.

Getting description of product from another table

Hi,
I am getting the level from the user, and based on that creating an internal table. I am getting product code (PRODH) and level (STUFE) from one table (T179), and getting product description (VTEXT) from another table (T179T). I need to create a single internal table (PVS) with all three fields.
How do I do that? This may seem like a very simple question, but I have only been teaching myslef ABAP for about one week.
Once I can prepare this table, I will use a function to display it.
Regards,
Al Lal
Code:
REPORT YABHINAV16.
program to display products at chosen level *
Tables: T179, T179t.
types: begin of hierarchy,
        prodh type t179-prodh,
        vtext type t179t-vtext,
        stufe type t179-stufe,
        end of hierarchy.
data: pvs type standard table of hierarchy initial size 0.
select-options level for t179-stufe no intervals.
Select prodh stufe from T179 into corresponding fields of table pvs where stufe in level.
select vtext from t179t into corresponding fields of table pvs where prodh = pvs-prodh.
sort pvs by prodh.

Hi Just change the code accordingly...
Tables: T179, T179t.
types: begin of hierarchy,
prodh type t179-prodh,
vtext type t179t-vtext,
stufe type t179-stufe,
end of hierarchy.
types: begin of text,
         prodh type t179t-prodh,
         vtext type t179t-vtext,
         end fo text.
data: pvs type standard table of hierarchy initial size 0.
data: it_text type standard table of text,
        wa_text type text.
select-options level for t179-stufe no intervals.
start-of-selection.
Select prodh stufe from T179 into corresponding fields of table pvs where stufe in level.
select prodh vtext from t179t into corresponding fields of table text for all entries in pvs where prodh = pvs-prodh.
end-of-selection.
sort pvs by prodh.
sort it_text by prodh.
loop at pvs.
read table it_text into wa_text with key prodh = pvs-prodh.
if sy-subrc eq 0.
pvs-vtext = wa_text-text.
endif.
modify pvs.
endloop.
Award Points If useful

UPDATING A TABLE WITH SAME INFO FROM ANOTHER TABLE ON THE SAME DB

0down votefavorite
I am trying to update a table with info from another table on the same db with same table name. I just want the info to be the same , no primary key or constraint involve just a straight replacement of records and I keep getting errors WITH THE TABLE not
being recignize. below is my query:
UPDATE
VNDFIL
SET EOBTYP
= VNDFIL.EOBTYP,
EDI_X12_835_VERSION = VNDFIL.EDI_X12_835_VERSION
FROM
AGERECOVERY
WHERE
VNDFIL.EOBTYP
= VNDFIL.EOBTYP
AND
VNDFIL
.EDI_X12_835_VERSION
= VNDFIL.EDI_X12_835_VERSION

Hi rotary,
If those two same named tables are in the same database then they have to be in different schemas. If you mean they are in the same server instance, then they may be in different databases, besides the "table not being recognized" error,
anyway you should use the fully qualified table names, that is database.Schema.Table(If across instances, ServerName should be prefixed) to avoid the table unrecognized error.
Using Identifiers As Object Names
With the fully qualified names, your update statement can be like below.
UPDATE
db1.schema1.VNDFIL
SET EOBTYP = srcTbl.EOBTYP, EDI_X12_835_VERSION = srcTbl.EDI_X12_835_VERSION
FROM
db1.schema2.VNDFIL srcTbl
WHERE
db1.schema1.VNDFIL.EOBTYP = srcTbl.VNDFIL.EOBTYP AND
db1.schema1.VNDFIL.EDI_X12_835_VERSION = srcTbl.VNDFIL.EDI_X12_835_VERSION
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Form item from another table

Similar Messages

Maybe you are looking for