Form layout is not updated after change

Hi, I have this problem with my interactive form in webdynpro abap:
I change layout of my form (change some texts, add buttons....), activate change without any error. But after showing form in my webdynpro application, there is NO change in layout of my form, still old layout is showing. Where should be error?
If I uncheck "Allow Form Rendering To Be Cached on Server" in Performance tab in Form Properties in layout editor in SE80, only ADS error is showed instead of my form in my webdynpro application.
Error from ADS is: com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.(200.101)
Many thanks for answer!
Edited by: Jiri Neuzil on Jul 14, 2009 10:39 AM

Hi,
I went tru all configuration settings, but ADS passed all tests from ABAP side, so I think everything is configured correctly. But I have found something in my Java server in web dynpro SAP Netweaver administration in Analysis -> Debug -> Logs and traces:
First error:
$$$/com/adobe/document/xmlform/msg.XFA=Error creating PDEFont for font MS-Mincho.
Second error:
$$$/com/adobe/document/xmlform/msg.XFA=Cannot render text ( ). See previous error.
Another error:
Error Log file "2009.07.14.111847SAFPXNEUZI02.pdf" written to C:\usr\sap\J2E\SYS\global\AdobeDocumentServices\renderErrorLog\errorFiles - but this file doesn't exists in specified directory
Another error:
Processing exception during a "Render" operation.
Request start time: Tue Jul 14 12:27:40 CEST 2009
com.adobe.ProcessingException: No <Render><Template> specified
Exception Stack Trace:
com.adobe.ProcessingException: No <Render><Template> specified
     at com.adobe.ads.operation.Render.validate(Unknown Source)
     at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
     at com.adobe.ads.request.Request.processOperations(Unknown Source)
     at com.adobe.ads.request.Request.process(Unknown Source)
     at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
     at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
     at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
     at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
     at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
     at SoapServlet.doPost(SoapServlet.java:51)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Many thanks for any answer!

Similar Messages

PS on ERP not update after changing person responsible on PPM Phase or Task

I've implemented BADI DPR_FIN_GECCO_ATTR to update additional attributes on the ERP side, such as person responsible and some of the user fields. In a normal create of the project everything works fine. When only the person responsible is updated in cProjects no update occurs on the ERP side. Everything is updated properly on the PPM side, there is no error on COCPCPR, but the person responsible field is not updated. If the person responsible is updated on the PPM side and also another field, like the long text, everything works fine. For some reason, the change of just the person responsible does not trigger a replication on the ERP side.
Has anyone come across a similar situation? Is there a way to trigger that the ERP side should be updated?

Hi Experts,
I've been able to identify the problem and need help with the solution. The problem when just the person responsible is changed on a task in PPM is that change is recognized as a change to the object CL_DPR_ENTITY_LINK. This type of change does not identify the task and insert a record in the change table for the task object. In method ON_APPLICATION_OBJECT_CHANGED of class CL_DPR_APPL_OBJECT_CHANGE_MNGR the table mt_updated_objects needs to be updated with the task if it is not already present when this type of change occurs.
My question is how can I get the task object associated with the DPR_ENTITY_LINK object to insert into that table?
Points will be rewarded for right solution.

IOs apps not updating after changing country

Hi all,
This has been an issue for a while that I have ignored but can no longer. I originally began using an iPhone and iPod touch several years ago in the US. 3 years ago I moved to Canada, and since then have noticed that apps purchased while I had a USA iTunes account will not longer update unless they are on my device (ie, no updates offered thorugh iTunes). Once moving to Canada and switching financial info from USA to Canada, and subsequently changing the country of my iTunes store (as I was forced to for via the required credit card for an iTunes account) the original USA apps will not update. I realize this is going to be an even bigger problems on moving back to the USA here in a few months as all my Canadian apps will no longer update. What is the solution. All apps have been purchased under the same iTunes account, the only thing that has changed is the country of the iTunes store (all apps are available in both countries also so that is not the cause).
Thank you

Not my issue. Many apps do update fine. 5 pesky ones are being difficult and refuse to update. Tried on various wifi networks with same result. Other applications do update. All the latest as far as iOS is concerned although sadly I am still using an iPad 2.
What is the same is only that a number of my applications in the App Store fail to update on my iPad 2.

BIA Master Data Index Not Updated After Change Run

In BIA it shows master data 0VERSION table /BI0/SVERSION has 360 records which matches with the number of entries in SE16 /BI0/SVERSION. One record was added to 0VERSION so now SE16 /BI0/SVERSION shows 361 records. I did a change run for this infoobject 0VERSION but the BIA index for /BI0/SVERSION still only show 360 records. I expect it to show 361 records after the change run. Is this a bug? Thanks.

Hi Thao,
I see one of 3 possible scenarios:
1) You load 0VERSION as a part of master data load (from flat file or another system). You see your 11th record in version "M" after load and then you run change run that makes "A" version of the record. ---> BIA index should be automatically updated. If not - open OSS message to SAP.
2) You load transactional data in an InfoCube, and it has new value for characteristic 0VERSION. ---> In this case you need to run roll-up of this new load request in the InfoCube to let BIA index be in-sync.
3) You are modifying 0VERSION manually (e.g. SQL INSERT statement), so system is not aware of new record at all. ---> You need to run the mentioned single-table-index program to update BIA index.
Is it any of these 3 scenarios, or you have the 4th one?
Regards,
-Vitaliy
Edited by: Vitaliy on Aug 19, 2008 1:59 PM

ITunes podcast page not updating after changing feed

Several months ago I successfully published a podcast to the iTunes Store. The following is the location of my podcast:
http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=335499017
Now, I've changed the feed URL as well as some of the details in the feed file (.xml). But the itunes page shows the old info! I made th URL change per the Apple guidelines (using the <itunes:new-feed-url> tag). I placed the new-feed-url tag on the OLD file only. I hope that's the right way to do it! I also created a 301 rediriect FROM the old feed TO the new one.
Does it take TIME for the change to take effect in itunes?

The feed URL registered with iTunes is http://www.semantica-portuguese.com/podcast.xml
There is nothing at this address. It makes no difference what you do anywhere else, until there is a feed file at this URL with the redirect tag in it iTunes cannot take any action.
I've updated the URL in the old feed file
Are you saying that the old feed file is at yet another URL? If you originally had another URL, and you placed a redirect tag in that to http://www.semantica-portuguese.com/podcast.xml then iTunes has redirected, and making alterations to the original feed is not going to have any effect since iTunes is no longer looking at it.
The only way out of this is to place at copy of the feed with the redirect tag at
http://www.semantica-portuguese.com/podcast.xml

Screen.PrimaryScreen.Bounds not updated after change in resolution

Hello,
When my application changes the Resolution and then calls
System.Windows.Forms.Screen.PrimaryScreen.Bounds
call returns the previous Screen Bounds instead of the recently updated one.
How can "System.Windows.Forms.Screen.PrimaryScreen.Bounds " be forced to return the updated screen bounds ?
Is this a bug ?
Thanks
Anup

Hello VargheseA,
Since this issue is related with windows form, i move it to the windows form forum, there are windows form experts who would help you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Project Variables Labels Not Updated After Change in OBPM 10GR3

Hi all,
I had previously deployed a project to the Weblogic Enterprise Server with a set of project variables , layouts, presentations and views.
Now, I changed the labels to the Project Variables using Studio. Made them all Upper Case and re-deployed the project to the Weblogic Enterprise Server.
I restarted Weblogic. I restarted the engine.
But the Project Variables labels in the views did not change from being lower case to upper case.
Why is that so?

Anybody on this?
Why do the labels of Project Variables not change in Weblogic Enterprise Server 10GR3 although they change in BPM Studio?
I also tried deleting these project variables from the Engine Tables --> PPROCINSTANCE and PPROCINSTEVENT
Restarted Weblogic
Restarted the Engine
Restarted the workspace
Redeployed a fresh BPM project.
But nothing changed?

Thumbnails do not update after changed are made in the raw module?

I am editing raw files in bridge. The changes that I have made in RAW do not transfer to the bridge thumbnail page when I leave the raw module. I can see that I have made changes by the little symbols for crop etc. in the thumbnail, but no live changes. Any suggestions?

Judy Lovins wrote:
I am editing raw files in bridge…
No, you're not.
Bridge is just a file browser, it doesn't open, edit or save any files at all. It just hands the file(s) to the appropriate application, whether that be Adobe Camera Raw (ACR), Photoshop, Illustrator, Acrobat, or even MS Word.
Check your Thumbnail preferences in Bridge Preferences.

Chart does not update after table changes

Simple X-Y chart using a data series from a table. The chart will not update after changing the table, for example after applying a filter. The chart will update if you close and reopen the file or go to Select Data on the chart. I use named ranges
because you can't use table nomenclature directly in the chart series definition.

Seems to update for me OK. You need to apply the entire unfiltered range to the chart before filtering. Did you do this or filter first and only apply the visible range?
If not the answer to you query then maybe I am not understanding the problem correctly so can you upload an example workbook?
Guidelines to post a workbook on OneDrive
Zip your workbooks. I prefer that you do not just save to OneDrive. (To Zip a file, in Windows Explorer Right click on the selected file and select Send to -> Compressed (zipped) folder.)
Go to this link. https://onedrive.live.com
Use the same login Id and Password that you use for this forum.
Select Upload in the blue bar across the top and browse to the zipped folder to be uploaded and select Open (or just double click). (Be patient and give it time to display the file after initially seeing the popup indicating it is done.)
Right click the file on OneDrive and select Share.
Do NOT fill in the form; "Select Get a Link" on the left side.
Click the button "Create a Link"
Click in the box where the link is created and it will highlight.
Copy the link and paste into your reply on this forum.
Regards, OssieMac

PO item change is not updated after Delivery completion

Dear All,
PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
Regards
Sujith

Hi Dev,
After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
Rgs
Sujith

Print Module templates layouts do not update on the fly

Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This occurs in all three Layout Styles. The very first layout chosen in Single Image/Contact Sheet, Picture Package, or Custom Package is the permanent 'default' and cannot be changed. The Preview will show as expected however any image stays stuck in the very first layout I chose after installing LR4 beta.
For example, I first chose Template Browser>Lightroom Templates>Maximum Size, and Layout Style>Single Image/Contact Sheet. Clicking through any other Templates (Lightroom or User defined) will alter the preview but not the layout display in the Print window. Same problem in either of the other Layout styles. I have been trying for days to rectify this, but it seems somehow more difficult than LR3. and not what I expect.
As a comparison, using the same steps in LR3 works perfectly as all print template/layouts can be changed on the fly as expected. I have no problems generating different layouts in LR3 and have been using LR print module since version 1 without this issue.
Is this a bug or are there any extra steps or workarounds I have not discovered? Any other testers seen this?

Update with more info. What am I doing wrong, if anything?
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This is not a hang since the layouts do not change after the initial choice no matter how much time elapsed.
iMac OS 10.6.8. 8GB RAM.Processor Intel Core 2 Duo. NVIDIA GeForce 8800 GS.
The steps as follows:
1) Lightroom 3.6 & LR4Beta exist side by side.
2) LR4 Beta> Print Module;
3) From filmstrip choose image;
4) Template Browser> Lightroom4Beta Templates>Maximum Size;
5) Preview displays as expected;
6) Layout Styles>Single Image/Contact Sheets
7) Template Browser> Lightroom4Beta Templates>click through any other templates (Lightroom or User defined);
8) Image layout in main window does not update;
9) Previews update;
10) Layout Style>Picture Package;
11) Template Browser>Maximum size is then automatically shown, however the template in the main window is actually (1) 7x5, (2) 2.5x3.5;
12) Any further attempts to change the layouts regardless of Style Layout choices are not successful.
13) Close LR4Beta>re-open LR4Beta;
14) Repeat test;
15) Print Module layouts do not update on the fly as expected;
16) Close LR4Beta and all applications;
17) Reboot iMac.
18) Open LR4Beta only;
19) LR4Beta>Print Module>Template Browser >Lightroom Templates>Maximum Size;
20) Image displays in main layout window with Template and Preview display as expected;
21) Choose different image>Template Browser>Lightroom Templates>Maximum Size;
22) Click through templates, layouts DO NOT update in main window although previews do automatically update.
23) CONCLUSION - In Lightroom 4 Beta>Print Module>Template Browser, image layouts do not change after initial choice as expected.
I posted this on Photoshop.com as a problem.

[svn:fx-i11] 5489: i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent

Revision: 5489
Author: [email protected]
Date: 2009-03-23 10:04:25 -0700 (Mon, 23 Mar 2009)
Log Message:
i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent
Fix: add a method in GroupBase that's called whenever child x,y changes in UIComponent. GroupBase invalidates layout when autoLayout is true.
QE Notes: None
Doc Notes: None
Bugs: SDK-20148
Reviewer: Deepa
tests: checkintests, mustella
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20148
http://bugs.adobe.com/jira/browse/SDK-20148
Modified Paths:
flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.a s
flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/UIComponent.as

FYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989

Picked Quantity is not updated After delivery in Vl03n

After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
Is it any configurations needed or writng any code.
For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
But it is not stopping the Program.
Please give any possible solution.

Hi Vinod,
Thank u For ur Answer.
Just my Fuctional Consultant given Procedure.
How to test the picking list. The problem is after Deliver the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
Output Type: EK00, Application: V4.
Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type. We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
Now the picked quantity is not updated after picking in VL03n.

Node.length not updating after removeInstance

I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
For example, the form starts with 1 line item. (node.length = 2, index = 0)
I can successfully add a new line item (node.length = 3, index = 1)
I then can add another line item (node.length = 4, index = 2)
I can successfully delete the last line item (index = 2) using the following code:
var nodelength = form1.items.nodes.length;
//need to know which instance is being removed
if(nodelength>2){
items.item.instanceManager.removeInstance(nodelength-2);
else if(nodelength==2){
form1.items.items.Status.rawValue = "";
form1.items.items.guestName.rawValue = "";
form1.items.items.Payment.rawValue = "";
form1.items.items.Entree.rawValue = "";
At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.

This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
Chris
Adobe Enterprise Developer Support

Average Active Sessions graph not updated after restart

Hi,
I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
I also tried to clearstate and restart the agent but no change..
Any idea?
Thanks

This is a bug and can be solved by applying
Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
Eric

Form layout is not updated after change

Similar Messages

Maybe you are looking for