Form message pops up "Sending Data files by Email" when it shouldn't

I have a simple PDF with a form which I've created with the form tools in Acrobat Pro 8 for sending a FDF file by email.
It works OK but when clicking on some of the other internal page links in the document (set up in InDesign) that are entirely unrelated to the form I get the following pop up box:
Sending Data files by Email
Please note this form contains an email submit button. Clicking this button will email a data file containing data you type into the form. However, the form itself will not be sent. Remember you cannot save a completed copy of this form with Adobe Acrobat Reader 9.
1. How do I stop this popping up. Especially on pages that are unrelated to the form.
2. Why does it say: "Remember you cannot save a completed copy of this form with Adobe Acrobat Reader 9. " when it does seem to work OK. I can send the FDF file to an email address. But this pop up box just isn't right.
And I have another query which isn't really on topic.
3. How do you get radio buttons to be mutually exclusive (eg: sex: male/female) - it says in the Radio Button Properties button Options tab to get them to have the same field name. But where do you set the field name?
I posted this in the Mac section as I think the Mac version of Acrobat Pro may be the route cause!

1. How do I stop this popping up. Especially on pages that are unrelated to the form.
I do not know you can. It is a user setting, not a pdf file setting.
2. Why does it say: "Remember you cannot save a completed copy of this form with Adobe Acrobat Reader 9. " when it does seem to work OK. I can send the FDF file to an email address. But this pop up box just isn't right.
It is correct. The user cannot save the file which is a pdf file. It is not sending you a pdf file, but as you noted a fdf file.
3. How do you get radio buttons to be mutually exclusive (eg: sex: male/female) - it says in the Radio Button Properties button Options tab to get them to have the same field name. But where do you set the field name?
If you double-click on any field with the field tool activated, you will get the field properties box. You can set the field name and default value here. You want the field name to be the same, but the default value to be different.

Similar Messages

Disable "Send Data File" prompt

When I open the pdf created in LiveCycle Designer 7.1 and click on "Submit to Email" it prompts me for what type of email app I use. It then presents the "Send Data File" prompt. The options are "Send Data File" "Print Form" and "Cancel." It also has a "Don't show again" checkbox.
Is there a way to disable this prompt? For example after the user clicks on their email app it would simply open the email with the data file as an attachment.
I'm afraid that my people may click on "Print Form" instead of "Send Data File" or they might click "Cancel". I just want to ensure this is as easy as possible for them to complete.
Does anyone know if it's possible to disable the "Send Data File" prompt and automatically open an email and attach the data file?

Amrit,
I apologize for taking so long to respond to your question. It took me a while to locate someone on the Acrobat Team who could answer my questions.
It's a good thing you asked about this because it turns out that this behaviour will no longer occur as of the next release of Acrobat. In the next release, if the call to submit a form's data via email comes from an Acrobat
Action, the "Choose your email application" dialog will always be displayed (unless the user has already clicked on the "don't show this again" check box which you can't control programmatically). If, however, the call to submit the form's data comes from JavaScript, the dialog won't be displayed. Instead, Acrobat will use the system's default email application (e.g. Microsoft Outlook) to do the submission.
Unfortunately, clicking on a button with the mouse or the keyboard (by setting focus to it and hitting the Enter key) as well as firing a button's Click event with execEvent("click"), as I had previously suggested, will all be considered Acrobat
Actions and will therefore possibly show the unwanted "Choose your email application" dialog.
In order to get around this, we need a solution which always uses JavaScript to do the submission. Fortunately, we can use the Acrobat Document object's
submitForm method to do this, thereby ensuring that the unwanted dialog doesn't show-up in future versions of Acrobat. The only potential problem with this solution is that it'll only work if the form is rendered to PDF. If the form is rendered to HTML (using
Adobe LiveCycle Forms, for example), this method will not work because Acrobat won't be involved in hosting the form.
The trick is to use the
event.target object in a regular button's Click event. This object is actually the Acrobat Document object. From there, you can use the
submitForm method as follows in order to achieve the same behaviour as that of Designer's email submit button (in JavaScript):
var sEmailAddress = "[email protected]";
var sSubject = "This is an email";
event.target.submitForm
cURL: "mailto:" + sEmailAddress + "?subject=" + sSubject,
cSubmitAs: "XML",
I've attached a sample form which uses this JavaScript to submit its data via email. Give it a try to see how it works.
Stefan
Adobe Systems

How do i send a file via email so it opens in booklet form to other people

how do i send a file via email so it opens in booklet form to other people

You would appear to be doing the right method as in this work through:http://support.en.belgacom.be/app/staticpages/devices/en/#/nokia/c3-00/email/sending-an-email-messag...
Is there similar problem with Email without attachment?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Error message pops up "The following files could not be imported because they could not be read."

Lightroom has suddenly stopped recognizing files on my camera's sd cards. An error message pops up "The following files could not be imported because they could not be read." My iphoto app can download them so why can't Lightroom?

The answer is here - about a million times over - and it's not a Lightroom problem. It's actually a Mac OS issue. You need to fix the write permissions on the destination folder for the import.

Error while sending PDF file by Email

Hi All,
I have a requirement to send multiple files by Email attachement from SAP to internet address.
All files sent correctly, except one PDF file.
I have 2 spools, and I am using FM CONVERT_OTFSPOOLJOB_2_PDF to get PDF data for Spool.
Then I am converting the 134 length PDF data to 255 Email Attachement binary table.
Now I have 2 file F1.PDF and F2.PDF, in SAP Office outbox and in receivers email, F2.PDF opening fine, however for F1.PDF I am getting some error no 109 in Adobe, which says "There was an error processing a page.There was a problem reading this document. (109)".
Please help in figuring out the reason for this.
Additional Information F2.PDF has some text data (SAP Script output) and F1.PDF has some text data with logo (SAP Script Output)
Thanks in advance

hi check out following code..
REPORT ZRICH_0003.
DATA: ITCPO LIKE ITCPO,
TAB_LINES LIKE SY-TABIX.
Variables for EMAIL functionality
DATA: MAILDATA LIKE SODOCCHGI1.
DATA: MAILPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: MAILHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: MAILBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: SOLISTI1 LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
PERFORM SEND_FORM_VIA_EMAIL.
FORM SEND_FORM_VIA_EMAIL *
FORM SEND_FORM_VIA_EMAIL.
CLEAR: MAILDATA, MAILTXT, MAILBIN, MAILPACK, MAILHEAD, MAILREC.
REFRESH: MAILTXT, MAILBIN, MAILPACK, MAILHEAD, MAILREC.
Creation of the document to be sent File Name
MAILDATA-OBJ_NAME = 'TEST'.
Mail Subject
MAILDATA-OBJ_DESCR = 'Subject'.
Mail Contents
MAILTXT-LINE = 'Here is your file'.
APPEND MAILTXT.
Prepare Packing List
PERFORM PREPARE_PACKING_LIST.
Set recipient - email address here!!!
MAILREC-RECEIVER = '[email protected]'.
MAILREC-REC_TYPE = 'U'.
APPEND MAILREC.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = MAILDATA
PUT_IN_OUTBOX = ' '
TABLES
PACKING_LIST = MAILPACK
OBJECT_HEADER = MAILHEAD
CONTENTS_BIN = MAILBIN
CONTENTS_TXT = MAILTXT
RECEIVERS = MAILREC
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
ENDFORM.
Form PREPARE_PACKING_LIST
FORM PREPARE_PACKING_LIST.
CLEAR: MAILPACK, MAILBIN, MAILHEAD.
REFRESH: MAILPACK, MAILBIN, MAILHEAD.
DESCRIBE TABLE MAILTXT LINES TAB_LINES.
READ TABLE MAILTXT INDEX TAB_LINES.
MAILDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( MAILTXT ).
Creation of the entry for the compressed document
CLEAR MAILPACK-TRANSF_BIN.
MAILPACK-HEAD_START = 1.
MAILPACK-HEAD_NUM = 0.
MAILPACK-BODY_START = 1.
MAILPACK-BODY_NUM = TAB_LINES.
MAILPACK-DOC_TYPE = 'RAW'.
APPEND MAILPACK.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
PERFORM GET_OTF_CODE.
LOOP AT SOLISTI1.
MOVE-CORRESPONDING SOLISTI1 TO MAILBIN.
APPEND MAILBIN.
ENDLOOP.
DESCRIBE TABLE MAILBIN LINES TAB_LINES.
MAILHEAD = 'TEST.OTF'.
APPEND MAILHEAD.
Creation of the entry for the compressed attachment
MAILPACK-TRANSF_BIN = 'X'.
MAILPACK-HEAD_START = 1.
MAILPACK-HEAD_NUM = 1.
MAILPACK-BODY_START = 1.
MAILPACK-BODY_NUM = TAB_LINES.
MAILPACK-DOC_TYPE = 'OTF'.
MAILPACK-OBJ_NAME = 'TEST'.
MAILPACK-OBJ_DESCR = 'Subject'.
MAILPACK-DOC_SIZE = TAB_LINES * 255.
APPEND MAILPACK.
ENDFORM.
Form GET_OTF_CODE
FORM GET_OTF_CODE.
DATA: BEGIN OF OTF OCCURS 0.
INCLUDE STRUCTURE ITCOO .
DATA: END OF OTF.
DATA: ITCPO LIKE ITCPO.
DATA: ITCPP LIKE ITCPP.
CLEAR ITCPO.
ITCPO-TDGETOTF = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
EXPORTING
FORM = 'ZTEST_FORM'
LANGUAGE = SY-LANGU
OPTIONS = ITCPO
DIALOG = ' '
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'START_FORM'
EXCEPTIONS
ERROR_MESSAGE = 01
OTHERS = 02.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
WINDOW = 'MAIN'
EXCEPTIONS
ERROR_MESSAGE = 01
OTHERS = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
EXCEPTIONS
ERROR_MESSAGE = 01
OTHERS = 02.
MOVE-CORRESPONDING ITCPO TO ITCPP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = ITCPP
TABLES
OTFDATA = OTF
EXCEPTIONS
OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR SOLISTI1. REFRESH SOLISTI1.
LOOP AT OTF.
SOLISTI1-LINE = OTF.
APPEND SOLISTI1.
ENDLOOP.
ENDFORM.

I cant send pdf file to email

Hi '
I have a acrobat pro 9 and when i tray to send the file to email i get that i dont have an email defualt set .
I have set the outlook as the defualt program and still get the same message .
what can i do ?

The problem may be related to the OS you have, the mail client being used, or whether mapi is properly activated on a Windows machine.

Whenever i try and send an imessage to someone that has an iphone it gets stuck at times and won't go through. I then have to send it as a basic text and then it will respond message failed to send what should i do when it does this i need help

Whenever i try and send an imessage to someone that has an iphone it gets stuck at times and won't go through. I then have to send it as a basic text and then it will respond message failed to send what should i do when it does this i need help

The use of iMessage depends on both the sender and the receiver having an active data connection. If either of the two connections are interrupted, the message can fail. The sending of an iMessage differs from the sending of an SMS, and if you are having SMS failures, that would be a carrier concern.

Trouble send PDF file by email

Hi I down loaded the new ios7 app and since then I have had trouble sending PDF files via email can any 1put any light in it?

Just like any other file...
On Sat, Mar 7, 2015 at 12:16 AM, larrys19338374 <[email protected]>

How to send .CSV file via email in Oracle10g/11g PL/SQL

Hi Guys,
Can any one let me know or suggest me how to send .csv file via email attachment using Oracle PL/SQL.
Thanks in advance!
Regards,
LRK

A FAQ. Use UTL_MAIL (if attachment is 32KB less). Else use UTL_SMTP. Search this forum. Search using google.

Logic for sending data files to multiple instances of Central

We are using Central Pro Output Server 5.6 with a single Central instance as of default installation on a Windows Server 2003. Data for the transaction files coming from our iSeries system via a printer queue (\\.\pipe\jetform\queuename)
Now we want to be able to produce more documents from Central much faster and therefore setting up multiple instances of Central. The problem is then where to put the logic for choosing instances.
The simplest way to do this would be to have iSeries to alternate the data files to different pipes (printer queues) for Central. But as we dont want to change our iSeries configuration for this, is there a way to solve this problem in Central?
Any help with this is much appreciated

Central provides no mechanism that I'm aware of that would do anything resembling the job distribution that you are wanting. Central is written to monitor it's input folders and process the files it finds there. Each instance is essentially separate from each other.
Your source system will need to select the appropriate instance to be used. Either that or you will need to have something between the source system and Central that is doing the distribution. For example, you could have the source system write to a folder that is not being monitored by Central and write a program that runs as a service that does monitor that folder. This program would then distribute the files. The likely drawback of having an intermediary program is that you are likely to not end up getting the documents printed any faster than with a single instance.
Another possible way, if the source system can create files with different file name extensions, would be to have them all written to the same folder and have each instance checking that particular folder but looking for files with different extensions. This might be problematic, though, because it might also end up with each instance watching the same "control" folder so that doing things like pausing Central would end up with no control of which instance was going to be paused.
The default setting for Central has it pausing for 5 seconds if it completes a job and there are no more files waiting for it. If your jobs are not coming in faster than Central is processing them then you would be getting some of this delay for your jobs. You could reduce this time or even set Central to process a job as soon as it shows up. I don't know if version 5.6 still has the problem but an earlier version would not "see" a file if it happened to show up exactly when it was looking for more (it was probably showing up milli-seconds after Central looked). This caused that job to just sit there until the next job showed up.
A major factor in getting the documents produced faster is going to be the speed and number of printers that they are going to - plus the number of pages in each document. For us, the single instance of Central that we are currently using can produce print much faster than our HP9050 printers (50 ppm) can actually print it.
You must be doing a lot of forms or each job is doing a lot of processing. Our typical print job does 4 tasks (depending on the job this can include things like: passing the file through the transformation agent, updating a mainframe database, FTPing the file to another server for archiving, and producing the print). A typical job with 11 output pages takes only 2-3 seconds. We have a task that runs every morning that retrieves mainframe generated jobs. I just checked one of our servers and it processed 208 jobs in exactly 8 minutes (26 jobs per minute at an average of 2.3 seconds per job). We also thought we'd need multiple instances due to speed but that just isn't the case for us. We have other reasons to move to multiple instances but speed in not a major factor any more.

Send data files between PDA and PC

Hi,
I have create an application for a PDA and PC. The aim of the programm is, that I can send and receive data files between the two devices over TCP/IP. When I run the two programms on two PC's, it run without problems. When I run one Programm on a PDA and the second on a PC it don't work. I can send the file but it don't arrive the PC/PDA.
I have create the Programm with LabVIEW PDA.
What can I do?
Thanks for your answer.
capunze

I suppose the reason is that some function blocks don't work on a PDA. The blocks where I used are "Read from Binary File", "Write to Binary File" and "Open/Create/Replace File".
Anybody knows this problem?
capunze

Purpose of adapter specific message atributes at sender,reciever file adapt

hi.
i want know birefly about adapter specific message atributes at sender ,reciever adapters.
and what would be the result if we enable this adpspecmessatb checkbox
waiting for your response.
bye.
regards.
seeta ram.

hi santosh .
thanks for yor your answer.
but when i mapped constant a to the udf and mapped to target and while iam testing i got the error like
10:38:30 Start of test
Compilation of MM_SapIsuTo3rdpartyAccountStatementExtraction successful Runtime exception during processing target field mapping /ns0:MT_SapisuTo3rdpartyAccountStatementExtraction/accstmtdetails/body/status. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._MM_SapIsuTo3rdpartyAccountStatementExtraction_ method filename$[a, com.sap.aii.mappingtool.tf3.rt.Context@421badd8] com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns0:MT_SapisuTo3rdpartyAccountStatementExtraction/accstmtdetails/body/status. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._MM_SapIsuTo3rdpartyAccountStatementExtraction_ method filename$[a, com.sap.aii.mappingtool.tf3.rt.Context@421badd8] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:350) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.execute(MapServiceRemoteObjectImpl0_0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._MM_SapIsuTo3rdpartyAccountStatementExtraction_ method filename$[a, com.sap.aii.mappingtool.tf3.rt.Context@421badd8] at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:56) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:282) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.execute(MapServiceRemoteObjectImpl0_0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:47) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:282) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.execute(MapServiceRemoteObjectImpl0_0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NullPointerException at com.sap.xi.tf._MM_SapIsuTo3rdpartyAccountStatementExtraction_.filename$(_MM_SapIsuTo3rdpartyAccountStatementExtraction_.java:119) ... 26 more RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:MT_SapisuTo3rdpartyAccountStatementExtraction/accstmtdetails/body/status. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._MM_SapIsuTo3rdpartyAccountStatementExtraction_ method filename$[a, com.sap.aii.mappingtool.tf3.rt.Context@421badd8]
10:38:37 End of test
what would be the reason for this.
waiting for u r response.
bye.
regards.
seeta ram.

My HP laptop computer (windows 7) had become infected. Fortunately I'd created backups, including data. Is there a way to recover my former bookmarks from my saved data files???

My HP laptop running Windows 7 had become infected. I'd backed up data files prior to reformating and reinstalling the original software. Can you tell me the name of the file and/or folder that the bookmark info. had been stored and how to access this and import the info. into the Firefox that I've downloaded onto my newly re-formatted computer? '''bold text'''

See:
* https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile

Sending .fdf file via email + exiting full screen mode

Hi everyone,
I have the following code attached to a button on a pdf form that sends the form data in a .fdf file via email:
var f = this.getField("useraddress");
this.mailForm(true, f.value, "", "", "RSVP");
Apparently the following line gets the user address from a field:
var f = this.getField("useraddress");
I created a field called "useraddress" and set it to be hidden but I don't know how to have my email address continually popuate this field so that it can be used in the above code to automatically send the .fdf file to my address.
Would someone be able to tell me how I'd do this?
Also just one other question if that's okay?
The pdf is set to open up in full screen mode automatically. I want to add a button that will take the viewer out of full screen mode but I'm not sure what the code would be to do this. Can someone tell me how to do this also?
Thanks in advance for any help.

Yeah I probably should - I'm not that familiar with javascript so I didn't know I could. Have worked out the correct way now so thanks.
I also noticed that when the .fdf file is attached, Acrobat names the file with a generic file name, eg. ACR5037112.fdf - is there a way to automatically name the file with the contents of one of the fields in the form?
Also, do you have an idea of what the code would be to exit out of fullscreen mode when a button is clicked?

TS3276 Can't send PDF files by email

I can't send PDF files of photo from my email. ??

Dropbox
A simple and popular way to copy files and share files amoung your devices.
https://www.dropbox.com/
copy to Share folder & email them that they have access
copy to Public folder & email them the link.
Robert

Form message pops up "Sending Data files by Email" when it shouldn't

Similar Messages

Maybe you are looking for