Form mode with UDO

Hi !!
I have a simple UDO form that i would like to close once the add button has been clicked. I tried the oForm.Close() but i'm stuck with the yes no question for save changes...
How can i go around that question ?
Thanks !

Hi Alain
here is threads where they actually talk about getting past the system messages, take a look.
Stop displaying system messagebox
Suppress system message when creating UDTs
System Message ( FormType=0) how do I know what called this form
Hope this helps

Similar Messages

How to use existing form with UDO

Hi
I want to use Sales order form with a new UDO. Is it possible that one form work with More than one object.
I want that when we click on User defined menu then same existing SAP form of Sales order will open with A new UDO( contains master and child tables). Or we have to create a replica of that sales order form.
Thx.

The system forms are not released as UDOs... UDOs can only be used with Userforms

I am unable to edit a form created with LiveCycle version 8.5 with LiveCycle Version ES1.

I am trying to edit a form created with LiveCycle version 8.08.2073 (installed with Adobe Pro 8). I am using LiveCycle version ES (installed with Adobe Pro 9). I can open the fhe form, but the tools are greyed out. It apears the file is locked for editing, but I cannot determine where/how to unlock it.

You should try to start in safe mode which runs a file check. You hold the shift key down during a start up till there is a progress bar towards thr bottom of the screen. This start will take a longer time than normal. In safe mode try the functioins you are having problems with to see if there is an improvement. Some links below to read.
http://support.apple.com/kb/ht1564
http://support.apple.com/kb/ht1455

DbDataSources and Form modes

Hi, I have a little problem, i was reading in the forum, but nobody has the same problem, so, i have a form, with 2 dbdatasources, one to OITM, and the other to OITW, in the form load i use the query method over the oitm dbdatasource and oitw dbdatasource and works fine, but by default the form opens in Find Mode and it's fine, when I change to Add Mode, all the dbdatasources disappers, and the update method doesn't work, does anybody has the solution of that?
i change the form mode to open in Add Mode but when I change to Find mode and the form works in the same way, dropping all the dbdatasources.
Message was edited by: Rodmmy Ortiz

Hey Rodmmy,
By default Business one resets the dbdatasources when changing to add mode as it assumes a new record is being added.
can you change the forms mode to add or OK mode first instead of find? and then populate the dbdatasource

Console Mode with third-party PCI card w/ open firmware bios,Open Boot Info

PPC macs used open firmware to boot, and their videocards contained forth code in their rom. There are even custom roms for PC video cards which contain code for the PPC mac open firmware.
Could such a card be initialized as the primary display device on an Ultra 5?
I'm betting I'm going to be answered with 'use a sun branded card'. I can't imagine the rom on these cards is so much different than that used on the PPC mac?
What exactly does Open Boot do to find a videocard? Are there any documents on this? I assume it finds some forth routine in the cards rom and runs that to initialize it and identify it's capabilities? Again, I would really appreciate some direction on where to look for docs.
I'm confused on the difference between openfirmware (apparently a spec), and open boot (sun's implementation? Are all implementations compatible with eachother?)
http://www.openbios.org/Welcome_to_OpenBIOS
"Open Firmware is found on many servers and workstations and there are several commercial implementations from SUN, Firmworks, CodeGen, Apple, IBM and others."
Additionaly, what is the sun4u architecture? sun4v architecture? Which workstations are which? System handbook doesn't seem to say under 'hardware specs'.
So, if all else fails and using a card with an openfirmware rom doesn't help me, how do I go about doing this myself?
I know how to work VGA console mode via the stardard vga registers, Is there a way to get open boot to do exactly what I tell it in terms of registers and addresses?
Can I get an uncompiled form of my Open Boot Prom for my Ultra 5?
All I'm really looking for is good docs/source on how Open Boot/ Open Firmware work, specificly conerning PCI video devices.
Thanks for any tips.

I haven't looked at anything beyond the OpenBoot level.
I've been neglecting this project for some time.
I just wanted to let anyone else in my situation know that the sun OpenBoot documentation was very helpfull in my sucessfully setting a mode with the card.
I don't know how the OS and later OpenWidows interact with the card, or with the information OpenBoot has about it, and it's current mode.
I hadn't really looked at any of that yet. Though this information will probably show up as soon as I bother to look for it, it'd be nice if some one recommends a specific doc, or has a short answer about the topic.
There happens to be an open source driver for my card, for XFree86 and Xorg, however, I've had enough of a challenge merely using OpenWindows.
/etc/X11/xorg.conf /etc/X11/XFree86.conf
Where are simmilar files for OpenWindows? Again, it's probably in some docs I haven't bothered to read yet.
Sparcy: Weird that the card has Fcode and OpenBoot doesn't add it's package to the device tree. I assume it treats it like a non Fcode PCI card? Does it recognize the contents of the PCI base address registers? Try proding it's PCI registers and see if they behave as expected.
If the card is actually working and you can read the expansion rom I don't see why the Fcode didn't work. Maybe it has a later incompatible Fcode revision? Open boot 4.x 5.x? sun4u as opposed to something else? Or maybe the Fcode was designed to lock the card to a certain type of system (I doubt that).
http://www.sunshack.org/data/bootroms.html
Newer versions of openboot, and new hardware series listed at that link. Where's a more complete list?
Oh well, I guess I should bother to read up on this more thoroughly and finish the job.
Let me know if you find out what the problem was, or if you try that MAC card. Thanks.

Form Generator for UDO

Hello,
I want to know about form generators for UDO.
The default forms generated when we create our UDO contains only a grid, this forms are very simple and not very useful for big applications.
My question is there is any form generator that allow us to generate complex forms with textfields, lablels and tabs from an UDO and his childs.
i hear about a file "XmlFormGenerator.cs", i don't know if it's that i'm searching for, but i cant find it in sdn.
Thanks.

I found the tool i'm searching for, it's in the Development Environment Tools v1.4 for Business One 2007, and it's work perfectly, you have just to specify the UDO and it's creates an XML Form for the UDO and his childs, in the Form all operations are supportes : Add, Update and delete.
There is the link to download it : https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/109ce044-6fbc-2a10-f59e-e92f3c775781

Form Mode problem

In my user defined form, i start the form in FIND mode. After i entered values into the edittext and change the form mode to OK mode via SDK, the edittext value is all refresh to empty
WHy is this happening? Is this normal? Is there any solution to this?
Thanks

seems to be normal..I don't know..
First try to add a TextBox to your Form and before you change it to "Ok" Mode, set the Textbox's Text with your Edittext..
or declare a global string variable and before changing the Form Mode, give your value to this string
have a try..
greetz
Matthias

Form mode changes in update mode while clicking on folders

On user defined form
While navigate last record form mode is "Ok"
when i click on further folders form mode going to change in update mode
How to resolve this problm?

Hello,
I experienced this yesterday as I was creating new form with ScreenPainter.
I solved it by directly editing the resulting srf file (xml syntax).
The folders can easily be identified from their type (type="99") and I changed the AffectsFormMode attribute from 1 to 0 in both the "item" element and the included "specific".
Regards,
Eric

Don´t execute pre_insert trigger in a form deployed with form server

I have a form developed with form6i. Executed in C/S mode, run ok; but executed in wed mode, the pre_insert trigger don´t fired. Using froms server in OAS relaease2.

OAS relaease2Do you talk about 10G Release 2? Did you recompile the fmb and any attached libraries with the 10g-compiler?

Add Matrix Data with UDO

Hello,
I´ve generated a simple form using SAP UDO Form Generator. The problem that for the second line on, the Matrix data are not saved to the data base. I´ve added code for the button add (oMatrix.AddLine()) and it´s possible to edit the cells.
Why only the first line is saved ? What do I have to do ?
I´ve also tried: oMatrix.FlushToDataSource() and oDataSource.InsertRecord.
Please help!
Thanks a lot,
Chrisitano Pegorer.

Trinidad,
I´m working on 2004 2B.
There´s no error message.
The form was generated by B1DO UDO Form Generator.
The only code is oMatrix.Addrow(1) to insert the new line on the matrix.
I´ve noticed that the Record Number is increased on the DBDatasource when a new line is added to the matrix.
I think that the Update button ("1") should save the datasource into the database.
The lines are brought ok and can be updated fine, so I think the bind is ok.
And I can insert as many records as I want to, if the form is in Add mode (first time). But once it´s inserted, a second try to insert more records (form in update mode) doens´t work anymore.
Any ideas ?
Thks!
Message was edited by: Christiano Pegorer
Message was edited by: Christiano Pegorer

Regarding add/update/find form modes

Hi,
Can you please help me with the way to catch the event of add/update/find form modes? Currently we are able to catch the event of the button but we require to catch seperately the form modes (add/update/find).
Thanks in advance,
Jona

Hi Jona,
You can use the property pVal.FormMode when you catch the itemEvent.
You have access to :
- find mode : SAPbouiCOM.BoFormMode.fm_FIND_MODE
- ok mode : SAPbouiCOM.BoFormMode.fm_OK_MODE
- update mode : SAPbouiCOM.BoFormMode.fm_UPDATE_MODE
- add mode : SAPbouiCOM.BoFormMode.fm_ADD_MODE
- view mode : SAPbouiCOM.BoFormMode.fm_VIEW_MODE
- print mode : SAPbouiCOM.BoFormMode.fm_PRINT_MODE
HTH,
Thibault

AJAX Multiple Form Submitted with Attachments.

Hi Everyone and Anyone
I have an issue with a form when using ajax I cannot get the File Attachment to upload.
<tr>
<td><label for="FileAttachment">Attach File (250Mb Limit)</label><br />
<input type="file" name="FileAttachment" id="FileAttachment" class="cat_textbox" /></td>
</tr>
Well that is not exactly true but if I use the standard BC form FormProcessV2 with ajax it is a no files upload.
But if I put this little bit of code in the form validation ( if (theForm.FileAttachment) theForm.FileAttachment.value = theForm.FileAttachment.value )then the files upload correctly ONLY I get redirect to a page with this:
{"FormProcessV2Response": { "success": true, "entityId": "28589333", "objectTypeId": "Cases", "objectId": "4686492", "message": "<table class=\"tabledefault\"><tr><td id=\"title\"><strong>Summary of web form submission:<\/strong><br\/><\/td><\/tr><tr><td id=\"name\"><strong>Your Name<\/strong><br\/>Daniel Telfer<\/td><\/tr><tr><td id=\"email\"><strong>Email Address<\/strong><br\/><a href=\"mailto:[email protected]\">dtug.co.nz<\/a><\/td><\/tr><tr><td id=\"casenumber\"><strong>Case Number<\/strong><br\/>4682<\/td><\/tr><tr><td><strong>Attachment<\/strong><br\/>People .pdf (31.06kb)<\/td> .........Deleted..............<\/tr><\/table><\/td><\/tr><tr><td id=\"innerform_95487\"><table class=\"tabledefault\"><tr><td id=\"CAT_Custom_293_957\"><strong>Upload your CV<\/strong><br \/><\/td><\/tr><\/table><\/td><\/tr><\/table>" }}
I can also do this and ( if (theForm.FileAttachment) theForm.FileAttachment.value = theForm.CAT_Custom_264793_95487.value; ) which I would like to do but also gives the above error. Even though when I go to the case the file are there.
I need to do this because the client wants to be able to click on these files and open them and the extend CRM database field just give a part url and the client has issues with this when they want to view the files (having to copy and paste it into the url especially when the url is incorrect as bc alters this in the CRM page without being in edit mode. PLEASE ADD THIS ADOBE! a FILE LINK so it is the same a the case related files.
I also want to do this because I want all the customer details on the same page and so need to use ajax to submit two forms at the same time which works as long as I do not upload a file, one way works but I get an error and the other the files do not upload and no error. ABODE PLEASE CASES FOR USER DETAILS FORM WOULD BE GREAT ie. name, username, password etc.
I am trying to keep things as simple as possible for the client and customers. I am so close but so far away.
1) Does anyone else know if ajax should submit the images automatically or is there some addition code necessary?
2) Does anyone know why my validation code works but gets an error in ProcessFormV2.aspx (except that it is a hack as I know this)?
3) Am I going about this completely the wrong and there is a better way.
Any HELP! would be great?

Thanks Liam
I will have to do this another way.
It is so close to working it is frustrating. Place this if (theForm.FileAttachment) theForm.FileAttachment.value = theForm.FileAttachment.value in the form validation and the form fields and files get uploaded you just get redirected to a page with formResponse HTML. But like you say not supported. So another way then.
BC any chance you can support this, it would be handy.
Cheers Daniel

E72 problem to activate silent mode with 031.023

now it is very difficult to activate silent mode with the ctrl key !

I think this is not a bug, but a fix. In the previous FW it was TOO easy to switch to Silent mode and that would happen quite often by mistake (at least to me).
So I think that Nokia corrected this problem, but did not communicate properly with their customers....
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
is there a way to put the IMacs into display mode with out logging into my Mac mini first
or is there a portable monitor that I can use that will not require me to login first

This
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
says:
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
How do I exit TDM?
To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

Firefox plug in container has stopped working, even in safe mode with plug ins disabled

My firefox keeps crashing every 5 - 10 minutes. Sometimes I get a windows error message saying "firefox plugin container stopped working", but most times I don't. These are the actions I've taken so far, with no effect:
1. Updated all my plug-ins
2. Run firefox in safe mode with plug-ins disabled
3. Uninstalled and reinstalled firefox
4. Run an AVG scan which turned up nothing
Can anyone offer advice on how to fix this (very annoying) problem?
I've had to write this in IE because firefox wouldn't stay open long enough for me to copy and paste it into the text box.

Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

Form mode with UDO

Similar Messages

Maybe you are looking for