Form updates not showing on portal page
I have a "Report from Query Wizard" report that shows a list of training
classes staff are requesting. This has a link to an update form so that
our boss can check Yes or No.
When I click Run or Run as Portlet from the Providers tab everything
works fine. But when I show the portlets in a region on a portal page
the update results don't show up. In other words, you can see the list,
click on the update link in any row of the list to get the form of
interest, make changes and Submit. The data actually gets updated in the
database table but the data changes will not appear in the portlet
report unless I re-add the portlet to the page region.
Any ideas what I'm doing wrong?
Webcache is probably running. Try setting the report refresh interval to .01.
Similar Messages
-
How can I update iOS 4.2.1 to the latest iOS if "software update" option is not showing on the page "General"? On my Iphone, it only show "About" and "Usage" . Please help.
See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation. If you are trying to upgrade to iOS 5 or higher, then you will have to connect your device to your computer and open iTunes in order to upgrade.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
Documents from Mac added to iCloud do not show up in Pages on iPhone 4S
Synopsis: Dcouments added to iCloud through Safari on Mac do not show up in Pages on iPhone 4S. New documents created in Pages on iPhone do not show up in iCloud. I expect the doucments to appear on my iPhone soon after uploading them from my Mac to iCloud through Safari, and to appear in iCloud soon after switching to the document listing in Pages and leaving the app. Several hours passed by without transfer happening, and I have waited a day and reconnected to Wi-Fi to wait several more hours. Still nothing shows up either in Pages on iPhone, or in iCloud in Safari on Mac. They are listed with their sizes and extensions (.pages or .pages-tef) in the iPhone Settings > iCloud > Storage & Backup > Manage Storage > Pages, though they don't seem selectable from there.
Software versions and Settings:
Mac
Mac OS X 10.7.2 (Lion)
Safari 5.1.1
Pages 4.1
System Preferences > iCloud: signed in; everything selected, except Photo Stream (no iPhoto).
Everything seems to work, except Find My Mac is flakey.
iPhone 4S
iOS 5.0
Pages 1.5 (417) [no other iWork apps]
Documents:
the defualt "Getting Started";
a test document with default name "Blank" and content with the word "Testing", shown with upwards arrow in upper right corner; tried renaming to "Just testing", no transfer resulted.
Plus button + offers: Create Document; copy from iTunes, iDisk, WebDAV; no iCloud (probably because it's supose to be auto);
Settings > Pages:
Use iCloud: ON
Restore: OFF; I have tried this, it automatically turns itself off after restarting Pages. No obvious changes result in Pages.
Settings > Wi-Fi: ON, connected to a network; tried several networks around town, as well as at home with a Time Capsule router.
Settings > iCloud:
everything ON, except Photo Stream;
Documents & Data:
Documents & Data: ON
Use Cellular: ON; also tried OFF initially.
Storage & Backup:
Manage Storage > Pages:
three documents in iCloud are listed, one of which I had created before iCloud on iPhone 3GS, and deleted from iPhone 4S after documents added to iCloud from Mac weren't showing up as expected;
their sizes are given;
suffixes are .pages for the two created on Mac, and .pages-tef for the one created on iPhone 3GS (before iCloud);
iCloud Backup: ON; successfully backs up everyday;
Email works, contacts are synced, calendar works, and everything seems fine except access to documents.
Approaches:
Software updates
Updated all software, no further updates available. Please confirm with aforementioned version numbers.
Add and Remove Documents
Used Safari to add two documents to iCloud with its menu for Pages of iCloud's iWork section, one at a time. Documents were originally created in Pages on Mac, and continuously edited since then. Explicitly saved documents (Save a Version on Lion) before uploading. Documents appeared listed in web page without problem.
Have tried deleting a document on iPhone that was originally created with Pages on iPhone 3GS prior iOS 5 as a way to jog the listing on iCloud. Listing on iCloud in Safari on Mac continues to show document deleted from iPhone. [Before deleting document, I had updated iPhone 3GS to iOS 5 and signed into iCloud a couple days before getting iPhone 4S, then immediately used the restore from iCloud feature for the iPhone 4S in the Apple retail store, updated all apps on Mac and iPhone, then deleted the document in Pages on iPhone.]
On iCloud in Safari on Mac: deleted the two documents uploaded from Mac; added the same documents again; edited documents on Mac, then uploaded and chose "Replace documents"; removed documents again; added them again. Never showed up in Pages on iPhone, even after waiting a day.
Have used iTunes to add the same documents to Pages on iPhone. Successfully opened documents in Pages on iPhone through plus button + > Copy from iTunes. Deleted documents from Pages's document listing, though they remain in iTunes section.
Removed documents of same name, though older copies, from Pages in iTunes for the iPhone.
Created a new document with Pages on iPhone, simply added one word "Testing" and then switched to document listing. New document has name "Blank" and an arrow in the upper right corner indicating it will upload next time an internet connection is established. That hasn't happened regardless of being connected to Wi-Fi and cellular for several hours. Next day, reconnected to internet with both Wi-Fi and cellular, the new dcoument "Blank" still is not in iCloud when I visit the site in Safari on Mac, and still has the arrow in the upper right corner in Pages on iPhone.
iPhone 4S Connected to Internet
Connected to Wi-Fi several hours each day, and cellular all day except from about 10pm to 7am when I switch it to Airplane mode. Always connected to Wi-Fi and cellular when attempting to access the documents in Pages on iPhone.
Restart iPhone and Pages
Have double-pressed Home button on iPhone to reveal along the bottom of screen a list of apps currently open, touched and held an icon to reveal the close badge on all icons, and selected the close badge on Pages, waited a few seconds, then started Pages again.
Have held On/Off button until "slide to power off" appears, then powered off iPhone, waited a few seconds, then held button again to start. Have done this with Pages either open or closed, per previous note. Still no change in document listing for Pages: test document still has not gone to iCloud, documents in iCloud still have not shown.
I think the only thing I haven't done is a complete restore.
Question: Can anybody point out what I might have missed or haven't tried that would get the documents from iCloud to Pages and vice versa?
I'm not looking forward to several hours of restoring, but if I must…
TIAOkay, I'm not sure what finally jogged it. It seems to be finally working.
After downloading any documents I could from iCloud to my Mac, I deleted all the documents from iCloud. I also deleted all documents from Pages on iPhone, except the original "Getting Started" document.
I duplicated the "Getting Started" document (Pages on iPhone) and edited it by moving the butterfly to the left on the same page, then switched to the Documents view. It had the arrow in the upper right corner of "Getting Started Copy", but no progress bar and nothing showed up in iCloud.
Then, I think I went to Settings > Pages > Use iCloud: NO. Went back to Pages and got a dialog in the Documents listing:
You are not using iCloud
What would you like to do with the
documents currently on this
iPhone?
Keep on My iPhone
Delete from My iPhone
Continue Using iCloud
I tried keeping them, then going back and turning it back on in Pages's settings, then going back to Pages. Finally something different happened: a progress bar on the "Getting Started copy" document. It never seem to finish, and would disappear if the phone went to sleep. I tried the whole sequenece again with same result, and nothing on iCloud.
I then tried Settings > iCloud > Documents & Data: OFF, and agreed to "Turn Off Documents" and have all documents stored in iCloud deleted, because as far as I could tell there weren't any documents in iCloud at this point anyways. I went back to Pages and the "Getting Started copy" suddenly disappeared.
So, I went back to Settings > iCloud > Documents & Data: ON, and did the same for Settings > Pages > Use iCloud: ON. Oddly, Pages now tried to download "Getting Started copy" even though it really shouldn't have existed anymore. I tried iCloud in Safari on Mac and saw there now was a document by that name, but when selected it said "Updating…" on it. I deleted it in iCloud, and it disappeared (I think, or I deleted it) in Pages on iPhone.
I gave up and waited a bit, maybe an hour or two.
I made sure all the settings were how they needed to be, noticed no documents in iCloud, and only the original "Getting Started" document in Pages on iPhone. I duplicated that document, and that's when it seemed to actually work. First, the arrow in its upper right corner appeared briefly, then a progress bar appeared on it instead, then the progress bar actually moved and completed. (I think. Some indicator happened. Everything is kind of fuzzy at this point while I'm writing this and juggling a couple other technical tasks.) Then I checked iCloud in Safari on Mac and the document was there. Wow.
So, I immediately tried uploading to iCloud from my Mac the two documents I had been trying, one at a time. Each time the document succeeded in iCloud, it suddenly appeared in Pages on iPhone. In fact, the second document began to appear in the documents listing in Pages on iPhone just before the progress bar in iCloud completed.
I tried opening each one in Pages on iPhone, and iCloud immediately updated each one with a preview and as downloadable. I downloaded them to the Mac and they opened fine. [Admittedly, the Pages version from iCloud of the "Getting Started copy" with the moved butterfly was a little different in Pages on Mac: it had the butterfly on the previous page underneath everything; the PDF version of that document had everything correct.]
Anyways, the document listing between iCloud and Pages on iPhone is working now.
I thinking it might have helped to clear out all the documents in iCloud and deleting all documents in Pages for iPhone. However, be sure to at least email copies from Pages on iPhone first if you don't have any backups. I think it might also have helped to turn off Settings > iCloud > Documents & Data: OFF, so it'll send that signal to delete the documents in iCloud, even if there's already nothing there. I don't know for sure, but that's probably the way to start from scratch. Oh, and maybe wait an hour or two after that before doing anything again, then turn Documents & Data: ON, and Pages > Use iCloud: ON, and then start by creating a new document in Pages on iPhone.
I'm just glad I didn't have to do a Restore from iTunes. And now that it's working, it's so instant between Pages on iPhone and iCloud! This is seeming like it will definitely be great, now that it's working. -
? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .
Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl -
Why is the software update not showing up in general settings?
Why does my software update not show up in general settings?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
Push button ijn appraisal showing in backend but not showing inn portal
Hi Expert,
I would like to ask that push button in appraisal while configuring ESS/MSS package.
It is showing in backend, but not showing in portal.
Request you to give your inputs to bring push button on to the portal.Hi,
are you using the same user to access backend and portal?. In backend, did you try from transaction PHAP_CHANGE with that user?. If you try with transaction PHAP_ADMIN in backed you are accessing as administrator, so you cannot compare the behaviour in PHAP_ADMIN and portal.
Regards,
Ana -
11.0.3 update not showing up in software update.
I am currently running itunes 11.0.2 on OS X 10.8.3. Checking for an upate for itunes from within the app indicates an update is available. Choosing to download it brings up the app store. App store checks and retruns that no updates are available. Any ideas? I guess I could go ahead and download the install image for 11.0.3. Just curious why it isn't showing up.
thanks.see:
software update not showing updates -
Garamond font is turned off when I installed OS X Mavericks. I restored it but it's not showing up in Pages. How do I fix this problem?
Try opening up:
/Applications/Font Book
Scroll to the Garamont Font, then try File > Validate font
If this doesnt work, right click (or control + click) the font and select show in finder. Makes sure it is not located in the /Library/Disabled Fonts/ folder -
BLOB image not shows in JSP page!!
Hi Dear all,
I had tried to configure how to show BLOB image to jsp page . The code are works fine and servlet works ok but image can not show only. can you help me that what need to be added. Please help me.
Can any experts help me? BLOB image not shows in JSP page. I am using ADF11g/DB 10gR2.
My as Code follows:
_1. Servlet Config_
<servlet>
<servlet-name>images</servlet-name>
<servlet-class>his.model.ClsImage</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>images</servlet-name>
<url-pattern>/render_images</url-pattern>
</servlet-mapping>
3. class code
package his.model;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Iterator;
import java.util.Map;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.domain.BlobDomain;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
public class ClsImage extends HttpServlet
//private static final Log LOG = LogFactory.getLog(ImageServlet.class);
private static final Log LOG = LogFactory.getLog(ClsImage.class);
public void init(ServletConfig config)
throws ServletException
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
System.out.println("GET---From servlet============= !!!");
String appModuleName = "his.model.ModuleAssetMgt";//this.getServletConfig().getInitParameter("ApplicationModuleName");
String appModuleConfig = "TempModuleAssetMgt";//this.getServletConfig().getInitParameter("ApplicationModuleConfig");
String voQuery ="select ITEM_IMAGE from MM_ITEMIMAGE where IMAGE_NO = 'P1000000000006'" ;// 'P1000000000006' this.getServletConfig().getInitParameter("ImageViewObjectQuery");
String mimeType = "jpg";//this.getServletConfig().getInitParameter("gif");
//?IMAGE_NO='P1000000000006'
//TODO: throw exception if mandatory parameter not set
ApplicationModule am =
Configuration.createRootApplicationModule(appModuleName, appModuleConfig);
ViewObject vo = am.createViewObjectFromQueryStmt("TempView2", voQuery);
Map paramMap = request.getParameterMap();
Iterator paramValues = paramMap.values().iterator();
int i=0;
while (paramValues.hasNext())
// Only one value for a parameter is expected.
// TODO: If more then 1 parameter is supplied make sure the value is bound to the right bind
// variable in the query! Maybe use named variables instead.
String[] paramValue = (String[])paramValues.next();
vo.setWhereClauseParam(i, paramValue[0]);
i++;
System.out.println("before run============= !!!");
// Run the query
vo.executeQuery();
// Get the result (only the first row is taken into account
System.out.println("after run============= !!!");
Row product = vo.first();
//System.out.println("============"+(BlobDomain)product.getAttribute(0));
BlobDomain image = null;
// Check if a row has been found
if (product != null)
System.out.println("onside product============= !!!");
// We assume the Blob to be the first a field
image = (BlobDomain) product.getAttribute(0);
//System.out.println("onside run product============= !!!"+image.toString() +"======="+image );
// Check if there are more fields returned. If so, the second one
// is considered to hold the mime type
if ( product.getAttributeCount()> 1 )
mimeType = (String)product.getAttribute(1);
else
//LOG.warn("No row found to get image from !!!");
LOG.warn("No row found to get image from !!!");
return;
System.out.println("Set Image============= !!!");
// Set the content-type. Only images are taken into account
response.setContentType("image/"+ mimeType+ "; charset=windows-1252");
OutputStream os = response.getOutputStream();
InputStream is = image.getInputStream();
// copy blob to output
byte[] buffer = new byte[4096];
int nread;
while ((nread = is.read(buffer)) != -1)
os.write(buffer, 0, nread);
//System.out.println("Set Image============= loop!!!"+(is.read(buffer)));
os.close();
// Remove the temporary viewobject
vo.remove();
// Release the appModule
Configuration.releaseRootApplicationModule(am, false);
} 3 . Jsp Tag
<af:image source="/render_images" shortDesc="Item"/> Thanks.
zakir
====
Edited by: Zakir Hossain on Apr 23, 2009 11:19 AMHi here is solution,
later I will put a project for this solution, right now I am really busy with ADF implementation.
core changes is to solve my problem:
byte[] buffer = new byte[image.getBufferSize()];
int nread;
vo.remove();
while ((nread = is.read(buffer)) != -1) {
os.write(buffer);
}All code as below:
Servlet Code*
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws ServletException,
IOException {
String appModuleName =
"his.model.ModuleAssetMgt";
String appModuleConfig =
"TempModuleAssetMgt";
String imgno = request.getParameter("imgno");
if (imgno == null || imgno.equals(""))
return;
String voQuery =
"select ITEM_IMAGE from MM_ITEMIMAGE where IMAGE_NO = '" + imgno + "'";
String mimeType = "gif";
ApplicationModule am =
Configuration.createRootApplicationModule(appModuleName,
appModuleConfig);
am.clearVOCaches("TempView2", true);
ViewObject vo = null;
String s;
vo = am.createViewObjectFromQueryStmt("TempView2", voQuery);
// Run the query
vo.executeQuery();
// Get the result (only the first row is taken into account
Row product = vo.first();
BlobDomain image = null;
// Check if a row has been found
if (product != null) {
// We assume the Blob to be the first a field
image = (BlobDomain)product.getAttribute(0);
// Check if there are more fields returned. If so, the second one
// is considered to hold the mime type
if (product.getAttributeCount() > 1) {
mimeType = (String)product.getAttribute(1);
} else {
LOG.warn("No row found to get image from !!!");
return;
// Set the content-type. Only images are taken into account
response.setContentType("image/" + mimeType);
OutputStream os = response.getOutputStream();
InputStream is = image.getInputStream();
// copy blob to output
byte[] buffer = new byte[image.getBufferSize()];
int nread;
vo.remove();
while ((nread = is.read(buffer)) != -1) {
os.write(buffer);
is.close();
os.close();
// Release the appModule
Configuration.releaseRootApplicationModule(am, true);
}Jsp Tag
<h:graphicImage url="/render_images?imgno=#{bindings.ImageNo.inputValue}"
height="168" width="224"/> -
Error installing CS5 updates; Some updates not showing up.
When I select a photo in lightroom 5 and opt to edit it in photoshop, I get a notification that says "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.3 for full compatibility. Pleas update the Camera Raw plug-in using the update tool available in the Photoshop help menu."
Upon entering photoshop and opening the update tool, there are two updates, but neither for the Camera Raw plug-in. I went ahead and tried to update those anyway, and at the end, I got two error messages reading "There was an error downloading this update. Please quit and try again later." and "Installation failed." The updates were for Adobe Extension Manager CS5 5.0 and Adobe Device Central CS5.0.1, respectively.
My question has two parts. First, how can I work around these error messages and successfully install the updates, and second, why is the Camera Raw plug-in update not showing up? Thanks in advance!
Below are screenshots of the Lightroom message and the update error messages.What updates should have been available, and
Why were they not available at that time?
Lets examine the case of the backup that has been on the shelf a while.
I really would like to help, but this post does not really answer my two questions. If you want to troubleshoot this scenario, we're going to need some HARD information to work with.
WSUS reported (updates needed report) that there were 90+ updates available and approved for that machine
The computer reporded that there were no updates available.
My first eyebrow-raising moment here is the idea that a computer has 90+ updates
approved and available (and, ostensibly, cannot find any of them to be downloaded), and my very first question in response to raising that eyebrow is this: And all 90+ of those updates are NOT SUPERSEDED??? To which my second question would be: When
was the last time that machine had patches installed?
I took a look at another computer in the same OU and computer update group with the same initial install image and I see 12 updates available, all not yet approved for that group.
If the updates are Not Approved, then those updates are also Not Available.
I'll also point out here that the best way to approach this scenario is to believe what you see and investigate the reason why, rather than questioning the veracity of what's displayed in the console or the logs.
If the client says there are no updates available for installation, then that's the bottom line, and the proper response is to identify an update that
should be available for installation and determine why it's not being downloaded/installed.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?
Try going to the following
Tools->Web Developer-> Page Source.
You can also access this by way of keyboard shortcut Ctrl + U
The View Page Source option is also available via the right-click menu by just right-clicking inside the page window & it will be the penultimate menu item. -
I want to upload a Banner to my iTunes U page.
The banner file has all the requirements like as, kind, size, frame, and etc.
Infortunately, I could not upload the file. It does not show in Provider Page Configuration or the preview.
Someone could help me?Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.
-
All apps need to update not showing in iTunes
All apps need to update not showing in iTunes. For example, 50 apps need to update. On section "Updates" shows only 10 programs. If you click on the "Update all programs" is updating all 50 programs. Last version of iTunes (11.1.5) installed.
On your MacBook yes, but not on another device. That should take place when your phone syncs with your iTunes. I wonder if what you are observing is due to the fact that you have turned off Wi-Fi syncing with your phone. Connect the phone to iTunes with the USB cable, select the summary tab and ensure that the option to sync over Wi-Fi is checked.
-
Form does not show up after been put in portal page
I have created form application and tested it in 9iAS but when I put it in Portal page, It does not show up in the Portal page. The report that I created under the same Application does show up. However, it does not show the form. I have check the Access and everything looks right. (I even grant it to the public and still does not work).
Any help would be appreciated.<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by chetan.kashyap ([email protected]):
Johnny,
This looks strange. We haven't encountered such problem. Could you pls give us more details. Like:
Are you using "Inherit Privilege from Application" ?
Are you using Tab page/ Normal Page.
If tab pages, have you set tab level security?
Are you able to run that particular form from application? (Pls check it has a Valid production version).
Are both forms & reports in the same application?
Is this problem occuring for only a particular form or for all the forms?
If you could provide the STEPS that you did..
Thanx,
Chetan.<HR></BLOCKQUOTE>
Chetan and Johnny,
I have the same problem as Johnny. Chetan, in answer to your questions:
1. Yes, I am using "Inherit Privilege from Application"
2. I tried it both on a page and on a tab and checked security, following the directions in "Building Portals, Release 3.0.8" Using "Portal30" login, access "Manage" etc.
3. Yes, the form runs in Application, but not as a portlet on a portal page. We are using the standard demo configuration, Oracle 8i (enterprise ed.) and Oracle9i Application Server (minimal ed.).
4. Yes, valid production version.
5. I tried running reports and forms from same application and from different applications. Still does not show up on portal page.
6. It occurs for all forms.
7. Steps: As I indicated, I followed the directions closely in "Building Portals" which builds "Form based on table or view", "Publish to Portal" I even tried the database sequence (see page 4-27) and added that to the form configuration. I'm running it on NT 4.0 (service pack 5). The software was downloaded from the Oracle site.
null -
Free Lion update not showing in purchases in App store.
Hi I have just bought a new I mac. I want the Lion update so went to the up to date program page and entered in the information required. Lion sucessfully purchased although is not showing in the purchases tab of the app store. I have checked my order history and it is there... I would really appreciate any help as I would like to upgrade to Lion before I start messing around with my mac.
I filled out the form for the Free Lion upgrade. I would then assume that I would go into app store and be able to download it but it hasn't appeared in the purchased tab. I had just setup my time capsule and the settings were wrong so my connection was intermittent. I possibly missed something during the process. I checked my order history and the free upgrade is there, I will be contacting mac app store tomorrow.
Maybe you are looking for
-
Hi everyone, I recently installed Windows 8 and i noticed that the screen puts a lot of strain on my eyes compared to Windows 7. It seems like the screen/text is blurry/fuzzy a bit putting strain on my eyes. It is not as crisp as it was in Windows 7.
-
Hi folks, I having a problem with performance tuning ... Below is a sample query SELECT /*+ PARALLEL (K 4) */ DISTINCT ltrim(rtrim(ibc_item)), substr(IBC_BUSINESS_CLASS, 1,1) FROM AAA K WHERE ltrim(rtrim(ibc_item)) NOT IN select /*+ PARALLEL (II 4) *
-
Hi all! When you assign a track to for instance a bus,an aux or an outputbus. The level drops 3db. Lets say I send out a testtone from an instrument track at 12db under unity. The meter on output 1-2 shows 15 db under U. If I send the tone to bus 1 b
-
Where can I find the source code of java.*?
Hey guy Is there any way I can get the code of the classes under java.*? Some of the javadocs online are not quite clear to me, so I hope I can check the code directly instead of looking at the javadocs Thanks!
-
Hi everyone, I have Lightroom 3.4.1 I can't open Lightroom, it says,,, Lightroon - Opening Catalog: DSCF0669.RAF.Ircat I have researched this on this site and on the net in general. I have extensively searched my HDD's for this file and it does not e