Format and formatKey in struts
I am having problem using format attribute with
<bean:write> tag. The error is
Attribute format invalid according to the specified TLD.
I have defined struts-bean.tld taglib in the file.
Can anybody give me the solution.
Thanks
Actually u r trying to include the bean in your jsp file better refer the tld file and give the attribute which is represented in the tld.
<bean:write name="beanname" property="methodname"
scope="request" filter="true"/>
like above give in your program and try it
A.Ramesh
Similar Messages
-
Use the default format and partition step to format disk0 partition 1 in multiple disks sutiation
As we know,we need to disable the default format and partition step in ts to let mdt deploy os on C and leave the other partitions stay safe when there is only one disk on pc,and the way of installing operation system is logical drive letter store in a varible.
But what if there are 2 disks on pc,and for a record the disk 0 is always the OS disk,don't need to confirmed this.How can we modify the format and partition step to format only C on disk0 under this condition?then lead the mdt to do the rest deployment
by itself.
ThanksYou are pushing up against the design limits of MDT, and the more complex and/or arbitrary the disk configuration the harder it is for MDT to perform installations.
If you want to maintain the *existing* disk configuration, and just update the OS present, then the recommended course of action is to run MDT from *within* the OS (cscript.exe
\\server\deploymentshare$\scripts\litetouch.vbs), not from WinPE. When you do this, it's called a "refresh" scenario. MDT can capture the user files via USMT, and it knows which
partitions to use, because it's launched from within the OS itself.
Disabling the default Format and Partition step has other unintended consequences.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
Unable to open .eps file "unknown format and cannot be opened" ?
A client sent me an .eps file (logo). I tried opening it in Illustrator AND photoshop (just to see if it was saved in one vs the other program) - however to no avail.
Illustrator gives me a message "unknown format and cannot be opened"
Photoshop gives me a message "photoshop was unable to parse the postscript".
I'm using Adobe CS4, and I've never seen this message before—would love to know what this means and how to resolve?
File attached if anyone is able to open / fix it?
Thanks kindly,
ChemolThanks for the advice Scott - does compression improve the .eps? Is it
silly for me to ask them to compress it since the file is only 766 KB
(that's how big the attachment is in my email - though I am unable to open
it)?
My friend is able to open it on his end - however the 3rd person (client) is
the one who sent it, and I have already requested a different version - no
response from them yet. Unfortunately what the company "has" is what he
will likely give to me again (ie: same file / unable to open). So ... I am
curious about how I can resolve this issue on my end - if possible?
Do you know what the AI and Photoshop error messages mean? Could the issue
be a mac vs PC concern? Or is it a corrupt file? Could it be a software
version issue (old vs new) ... or Quark incompatibility?
.... just guessing at this point....Any insight as to what different
scenarios may apply in this situation would be greatly appreciated ..thank
you. -
I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?
I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format. -
ALV output converted into PDF format and send that PDF to user through mail
Hi Experts,
I have report earlier its output was in alv grid.
Now i want that ALV output converted into PDF format.And that PDF output send to user through mail.
Can u please tell how to do?
My code is here(output is displaying in ALV grid).
INCLUDE <icon>.
TYPE-POOLS: slis, kkblo.
TABLES : zmsd_freight_hdr, zmsd_freight_det, zmsd_blinfo, zmsd_diheader.
TABLES : lfa1.
DATA : t_hdr LIKE zmsd_freight_hdr OCCURS 0 WITH HEADER LINE,
T_DET LIKE ZMSD_FREIGHT_DET OCCURS 0 WITH HEADER LINE,
t_bl LIKE zmsd_blinfo OCCURS 0 WITH HEADER LINE,
t_di LIKE zmsd_diheader OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_det OCCURS 0.
INCLUDE STRUCTURE zmsd_freight_det.
DATA type(30).
DATA: END OF t_det.
DATA: v_target2(30),
v_zsammg LIKE t_det-zsammg,
v_gsttotal LIKE t_det-zamount.
DATA : BEGIN OF t_data OCCURS 0,
zsammg LIKE zmsd_freight_hdr-zsammg,
zdidbl LIKE zmsd_freight_hdr-zdidbl,
zvkorg LIKE zmsd_freight_hdr-zvkorg,
zinvno LIKE zmsd_freight_hdr-zinvno,
zttlamt LIKE zmsd_freight_hdr-zttlamt,
zstatus LIKE zmsd_freight_hdr-zstatus,
ztype LIKE zmsd_freight_hdr-ztype,
zconfirm LIKE zmsd_freight_hdr-zconfirm,
zconfirmdate LIKE zmsd_freight_hdr-zconfirmdate,
erdat LIKE zmsd_freight_hdr-erdat,
ernam LIKE zmsd_freight_hdr-ernam,
erzet LIKE zmsd_freight_hdr-erzet,
aedat(10),
aenam LIKE zmsd_freight_hdr-aenam,
aezet LIKE zmsd_freight_hdr-aezet,
zline LIKE zmsd_freight_det-zline,
zfptype LIKE zmsd_freight_det-zfptype,
zchrcode LIKE zmsd_freight_det-zchrcode,
zcurcode LIKE zmsd_freight_det-zcurcode,
zqty LIKE zmsd_freight_det-zqty,
zuom LIKE zmsd_freight_det-zuom,
zrate LIKE zmsd_freight_det-zrate,
zamount LIKE zmsd_freight_det-zamount,
zexrate LIKE zmsd_freight_det-zexrate,
zccode LIKE zmsd_blinfo-zccode, "MADK991565
zccode like ZMSD_FREIGHT_HDR-zfcode, "MADK991565
zbldate(10),
zbl LIKE zmsd_blinfo-zbl,
type(3),
waerk LIKE zmsd_freight_det-zcurcode,
zamountl LIKE zmsd_freight_det-zamount,
END OF t_data.
DATA : w_layout TYPE slis_layout_alv,
w_catalog TYPE slis_fieldcat_alv,
t_catalog TYPE slis_t_fieldcat_alv,
w_sort TYPE slis_sortinfo_alv,
t_sort TYPE slis_t_sortinfo_alv.
DATA V_ZINVNO like T_HDR-ZINVNO. "MADK991565
DATA : v_count TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK a0 WITH FRAME TITLE text-001.
PARAMETERS : p_zvkorg LIKE zmsd_freight_hdr-zvkorg OBLIGATORY .
SELECT-OPTIONS : s_zdidbl FOR zmsd_freight_hdr-zdidbl ,
s_zccode FOR lfa1-lifnr ,
s_status FOR zmsd_freight_hdr-zstatus ,
s_ztype FOR zmsd_freight_hdr-ztype ,
s_erdat FOR zmsd_freight_hdr-erdat ,
s_ernam FOR zmsd_freight_hdr-ernam ,
s_zconfd FOR zmsd_freight_hdr-zconfirmdate .
PARAMETERS : p_zconf AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK a0.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-002.
PARAMETERS : p_hdr RADIOBUTTON GROUP rad DEFAULT 'X' ,
p_det RADIOBUTTON GROUP rad .
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
AT SELECTION-SCREEN.
START-OF-SELECTION.
PERFORM get_data.
PERFORM process.
PERFORM display.
END-OF-SELECTION.
PERFORM fm_get_num_pages.
AT USER-COMMAND.
AT LINE-SELECTION.
TOP-OF-PAGE.
PERFORM fm_top_of_page USING '7010' sy-title space.
FORM get_data.
SELECT *
FROM zmsd_freight_hdr
INTO TABLE t_hdr
WHERE zvkorg EQ p_zvkorg
AND zdidbl IN s_zdidbl
AND zstatus IN s_status
AND ztype IN s_ztype
AND erdat IN s_erdat
AND ernam IN s_ernam
AND zconfirmdate IN s_zconfd
AND ZFCODE IN S_ZCCODE. "MADK991565
IF p_zconf = 'X'.
DELETE t_hdr WHERE zconfirm NE 'C'.
ENDIF.
CHECK NOT t_hdr[] IS INITIAL.
SELECT *
FROM zmsd_blinfo
INTO TABLE t_bl
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg.
SORT t_bl BY zsammg.
SELECT *
FROM zmsd_diheader
INTO TABLE t_di
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg.
SORT t_di BY zsammg.
IF P_DET = 'X'. "MADK933361
SELECT *
FROM zmsd_freight_det
INTO TABLE t_det
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg
AND ZINVNO = T_HDR-ZINVNO . "MADK991565
SORT t_det BY zsammg zline. "MADK991565
SORT T_DET BY ZSAMMG ZINVNO ZLINE. "MADK991565
ENDIF. "MADK933361
ENDFORM.
FORM process.
REFRESH t_data.
CLEAR v_gsttotal. "MADK933361
LOOP AT t_hdr.
Start of MADK933361
CLEAR: v_target2.
v_zsammg = t_hdr-zsammg.
V_ZINVNO = T_HDR-ZINVNO. "MADK991565
AT NEW zsammg. "MADK991565
AT NEW ZINVNO. "MADK991565
PERFORM get_gst_value.
ENDAT.
End of MADK933361
PERFORM move_header.
CHECK t_data-zccode IN s_zccode.
IF p_det = 'X'.
CSF Project Changes Starts DEV34 MADK985782
LOOP AT T_DET WHERE ZSAMMG = T_HDR-ZSAMMG..
LOOP AT t_det WHERE zsammg = t_hdr-zsammg AND
zinvno = t_hdr-zinvno.
CSF Project Changes Ends DEV34 MADK985782
PERFORM move_header.
CHECK t_data-zccode IN s_zccode.
MOVE-CORRESPONDING t_det TO t_data.
t_data-zamountl = t_data-zamount * t_data-zexrate.
APPEND t_data.
CLEAR t_data.
ENDLOOP.
ELSE.
APPEND t_data.
CLEAR t_data.
ENDIF.
AT END OF zsammg.
CLEAR v_gsttotal.
ENDAT.
*Start of changes for IS090901289-PIA MADK991565
AT END OF ZINVNO.
CLEAR V_GSTTOTAL.
ENDAT.
*End of changes for IS090901289-PIA MADK991565
ENDLOOP.
ENDFORM.
FORM move_header.
MOVE-CORRESPONDING t_hdr TO t_data.
t_data-zttlamt = t_data-zttlamt + v_gsttotal. "MADK933361
t_data-waerk = 'SGD'.
IF NOT t_hdr-aedat IS INITIAL.
WRITE: t_hdr-aedat TO t_data-aedat.
ELSE.
CLEAR : t_data-aedat.
ENDIF.
READ TABLE t_bl WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_bl-zccode. "MADK991565
T_DATA-ZCCODE = T_HDR-ZFCODE. "MADK991565
IF NOT t_bl-zbldate IS INITIAL.
WRITE: t_bl-zbldate TO t_data-zbldate.
ENDIF.
t_data-zbl = t_bl-zbl.
t_data-type = 'DBL'.
ELSE.
READ TABLE t_di WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_di-zdiforcode. "MADK991565
T_DATA-ZCCODE = T_HDR-ZFCODE. "MADK991565
t_data-type = 'DI'.
ENDIF.
ENDIF.
ENDFORM.
FORM display.
IF t_data[] IS INITIAL.
MESSAGE s398(00) WITH 'No Data Selected'.
EXIT.
ENDIF.
DATA : l_repid LIKE sy-repid.
l_repid = sy-repid.
REFRESH t_catalog.
CLEAR t_catalog.
w_layout-cell_merge = 'X'.
PERFORM map_fields.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_callback_user_command = 'ALV_USER_COMMAND'
is_layout = w_layout
it_fieldcat = t_catalog[]
i_grid_title = sy-title
i_save = 'A'
it_sort = t_sort[]
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
FORM map_fields.
Sort Order
CLEAR v_count.
PERFORM sf USING 'ZDIDBL' 'X' 'X'.
Fields to be displayed
CLEAR v_count.
IF p_hdr = 'X'.
PERFORM af USING :
DESCRIPTION FIELD LEN RTABLE RFIELD
'DI/DBL ' 'ZDIDBL' '14' ' ' ' ',
'Type ' 'TYPE' '04' ' ' ' ',
'Forwarder Code ' 'ZCCODE' '14' ' ' ' ',
'BL Number ' 'ZBL' '14' ' ' ' ',
'BL Date ' 'ZBLDATE' '10' ' ' ' ',
'Invoice Number ' 'ZINVNO' '15' ' ' ' ',
'Extraction ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
'Freight Type ' 'ZTYPE' '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE ',
'Confirmation ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
'Confirm Date ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
'Total Amount ' 'ZTTLAMT' '18' ' ' ' ',
'Created On ' 'ERDAT' '10' ' ' ' ',
'Created By ' 'ERNAM' '10' ' ' ' ',
'Changed On ' 'AEDAT' '10' ' ' ' ',
'Changed By ' 'AENAM' '10' ' ' ' '.
ELSE.
PERFORM af USING :
DESCRIPTION FIELD LEN RTABLE RFIELD
'DI/DBL ' 'ZDIDBL' '14' ' ' ' ',
'Type ' 'TYPE' '04' ' ' ' ',
'Forwarder Code ' 'ZCCODE' '14' ' ' ' ',
'BL Number ' 'ZBL' '14' ' ' ' ',
'BL Date ' 'ZBLDATE' '10' ' ' ' ',
'Invoice Number ' 'ZINVNO' '15' ' ' ' ',
'Extraction ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
'Freight Type ' 'ZTYPE' '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE ',
'Confirmation ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
'Confirm Date ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
'Total Amount ' 'ZTTLAMT' '18' ' ' ' ',
'Freight Payment ' 'ZFPTYPE' '14' ' ' ' ',
'Charge Code ' 'ZCHRCODE' '10' ' ' ' ',
'Currency ' 'ZCURCODE' '08' ' ' ' ',
'Quantity ' 'ZQTY' '13' ' ' ' ',
'UoM ' 'ZUOM' '04' ' ' ' ',
'Rate ' 'ZRATE' '15' ' ' ' ',
'Amt(Foreign Curr)' 'ZAMOUNT' '16' ' ' ' ',
'Exchange Rate ' 'ZEXRATE' '13' ' ' ' ',
'Amt(Local Curr) ' 'ZAMOUNTL' '16' ' ' ' ',
'Created On ' 'ERDAT' '10' ' ' ' ',
'Created By ' 'ERNAM' '10' ' ' ' ',
'Changed On ' 'AEDAT' '10' ' ' ' ',
'Changed By ' 'AENAM' '10' ' ' ' '.
ENDIF.
ENDFORM.
FORM af USING text
field
len
table
reffield.
v_count = v_count + 1.
w_catalog-col_pos = v_count.
w_catalog-fieldname = field.
w_catalog-ref_tabname = table.
w_catalog-ref_fieldname = reffield.
w_catalog-seltext_s = text.
w_catalog-seltext_m = text.
w_catalog-seltext_l = text.
w_catalog-outputlen = len.
IF field = 'ZTTLAMT' OR field = 'ZAMOUNTL'.
w_catalog-no_zero = 'X'.
w_catalog-cfieldname = 'WAERK'.
w_catalog-datatype = 'CURR'.
ENDIF.
IF FIELD = 'ZRATE' OR FIELD = 'ZAMOUNT'.
IF field = 'ZAMOUNT'.
w_catalog-no_zero = 'X'.
w_catalog-cfieldname = 'ZCURCODE'.
w_catalog-datatype = 'CURR'.
ENDIF.
IF field = 'ZQTY' OR field = 'ZRATE'.
w_catalog-no_zero = 'X'.
w_catalog-datatype = 'DEC'.
ENDIF.
APPEND w_catalog TO t_catalog.
CLEAR w_catalog.
ENDFORM.
FORM sf USING fieldname sortup group.
v_count = v_count + 1.
CLEAR w_sort.
w_sort-fieldname = fieldname.
w_sort-spos = v_count.
w_sort-up = sortup.
w_sort-group = group.
APPEND w_sort TO t_sort.
ENDFORM.
FORM alv_user_command USING in_ucomm LIKE sy-ucomm
in_selfield TYPE slis_selfield.
DATA: lfs_data LIKE t_data.
IF in_ucomm = '&IC1'.
READ TABLE t_data INDEX in_selfield-tabindex INTO lfs_data.
CHECK NOT lfs_data-zdidbl IS INITIAL.
IF lfs_data-type = 'DBL'.
DATA: l_zdbl LIKE zmsd_diheader-zdinum.
l_zdbl = in_selfield-value.
EXPORT l_zdbl TO MEMORY ID 'VBL'.
CALL TRANSACTION 'ZMSD_BL01'.
ENDIF.
IF lfs_data-type = 'DI'.
DATA: v_dinum LIKE zmsd_diheader-zdinum.
v_dinum = in_selfield-value.
EXPORT v_dinum TO MEMORY ID 'VDI'.
CALL TRANSACTION 'ZMSD_DI01'.
ENDIF.
ENDIF.
ENDFORM.
FORM get_gst_value.
LOOP AT t_det WHERE zsammg = v_zsammg
AND ZINVNO = V_ZINVNO. "MADK991565
CHECK t_data-zccode IN s_zccode.
t_det-zamount = t_det-zamount * t_det-zexrate.
SELECT SINGLE y0mmtarget2
INTO v_target2
FROM y0mmipstranslate
WHERE y0mmdatatype = '70' AND
y0mmsource = t_det-zchrcode.
SELECT SINGLE y0mmtarget1
INTO t_det-type
FROM y0mmipstranslate
WHERE y0mmdatatype = '76' AND
y0mmsource = v_target2.
IF t_det-type NE '3Z'.
v_gsttotal = v_gsttotal +
( t_det-zamount * 5 / 100 ).
ENDIF.
ENDLOOP.
Regards,
Raj.Hello,
Following is the procedure to convert alv output to spool and then it to PDF Format.
After we display the ALV, we can check whether it is running in the background using system field u2018sy-batchu2018. Then,we call an function module named u2018GET_JOB_RUNTIME_INFOu2019 to get the current job information. Then go to spool request table tbtcp to get the spool id.
Get current job details
CALL FUNCTION u2018GET_JOB_RUNTIME_INFOu2019
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> u20180000000000u2032
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
Finally, we can call function module u2018CONVERT_ABAPSPOOLJOB_2_PDFu2018 to convert spool reqeust(which is stored in OTF format) to PDF format. Then we can call either function module u2018SO_DOCUMENT_SEND_API1u2032 or SAP BCS (Business Communication Service) to send the pdf as an email attachment.
CALL FUNCTION u2018CONVERT_ABAPSPOOLJOB_2_PDFu2019
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
Regards,
Sayali
Edited by: Sayali Paradkar on Apr 20, 2010 12:51 PM -
Convert the spool to xls format and email through attachment to the user
Hi all,
When I execute a report in background, I get spool. I need to convert the spool to xls format and email through attachment to the user.The xls file should not be saved on local system.
If I use the Spool Recepient tab in SM37 it mails the spool list as .txt file to the mail receipient. But I need to send it as an .xls file.
Can any one help me on thisDid you get the solution? i have the same problem.
-
To convert Smart Form output to PDF format and send it via email.
Hi Friends,
Could any one please tell me, how to convert the Smart Forms output to PDF format and send it via email to customer. If any one have the code, kindly mail me to [email protected]
Thanks & Regards,
JohnRefer the links -
how to convert smartform into pdf and send through mail
Smartform as PDF attachment to a mail.
smartform pdf and mail
smartform to pdf to mail
Regrads,
Amit
Reward all helpful replies. -
Restored our SSRS 2008 R2 from one server to another; Dates are in UK format and not US
We have restored our SSRS 2008 R2 from one server to another. The original server was in US locale/culture. The new server was in UK locale/culture, when the restore happened. However it should have been in US locale/culture. We have made this change and
new reports work OK.
However existing reports (i.e. saved by a user) are still trying to use the US dates in a UK format and as a result throwing a date cant be below 1753 error.
Has anyone seen this issue before or have any idea what we need to do to fix it?
Thanks
KimberladHi Kimberlad
Have you checked any changes in the Collation?
Please verify Reporting Server Databases and Server Collation is there any mismatch with your Source Server.
and also please post complete Error message..
Nag Pal MCTS/MCITP (SQL Server 2005/2008) :: Please Mark Answer/vote if it is helpful :: -
Is there anyway to keep our old mail, calendar, and phone format and yet use IOS7? I find the new system so plain that it is difficult to see. I keep missing new emails because the little numbers are so small they barely show up and the plain white screens are so bright they are hard to look at. I would just go back but I really like some of the new features.
Man I am with you!
The new user interface for iOS7 is just dreadful. I turned down the brightness but the lack of shading or delineation between UI elements makes it difficult to read.
It feels like they're chasing Android. -
I have the latest version of Adobe Premiere, CC 2014 but whenever I want to render and export a video that is typically 70 megabytes in size I can't seem to always see how big the file will end up being for all the formats and I don't want to end up with a video larger than 250 to 300 megabytes in size just for the extremely best or highest quality even though I want the video to be well polished and in better quality than I usually get thee, These videos are usually imported as mp4. What file version of mp4 or otherwise would give me an originally imported video of 70 megabytes an output of no more than or around 300 megabytes or even less without compromsing video quality? I don't want a huge file size as I am uploading it to my YouTube channel via their web interface on another person's machine and they don't have Premiere and only has a DSL connection. So what video output settings should I use for a good quality video that isn't smaller than the original but the same size or a bit higher and not extremely large like MOVs and sometimes mp4s usually are depending on what you do to it and it is outputted.?
Export
Format: H.264
Preset: YouTube (make sure this matches the dimensions of your sequence)
You could further adjust the Target Bitrate but the preset is already setup for a good quality file for upload.
You can also do further reading on Video Bitrates. -
i formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options, 1- erase and sync, 2- transfer purchases. what to do?
Follow these instructions:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
Blue screen keeps popping up, format and reinstall did not fix problem
My wife has a Toshiba Satellite A55-S3063 Laptop with Windows XP Home. After we got married in 2008, I noticed SP2 was installed and there was an update ready. She said SP3 never installed and I couldn't get it to install. Even with Registry checks, removing anti-virus, and other suggestions from the MS site, I still couldn't get it to install. I told her we would do a format and reinstall "someday." A month ago, the blue screen of death started coming on regularly and the computer would restart quickly after flashing the blue screen. I did a System Restore from a previous point, but a few days later, it started happening again. I decided to take this opportunity to do a format and reinstall, so I backed everything up. Her computer came with a recovery disk that only gives you the option to do a format and reinstall, not a recovery like I've done on other computers. So the format was really our only option. I did this and installed all the Service Packs (including 3). I put a new battery in (that we hadn't used before) because the old one didn't last very long and I got a blue screen and restart the next time I turned on the computer. AFter that one time, it worked fine the rest of the day. The next day I plugged in the external hard drive (Simpletech 500gb) to move her info back over. A few minutes later, blue screen and system crash. On restart, same thing. Next restart, just a black screen. I decided no big loss if I reinstall again, so I reinstalled again. Now I just get the blue screen during setup. Right after I type in the computer name and click "Next" I can hear the hard drive spinning and then the blue screen and system restarts. The blue screen is not up long enough to read, so I can't give you an error message.
I can only assume this a hardware problem, but I don't know what or how to fix it. We have her sister's old computer which is the same computer, bought at the same time, but stopped working years ago. So with explicit instructions, I might be able to retrieve hardware from that. Except the hard disk; her sister kept that and is using it as a small external drive.this link should give you some info on how to get it open to everything
A55 disassembly
toshiba doesnt offer any manuals so this is about as good as you will find
hope that helps
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind. -
I have an iPhone 5c I was messing with my calendar and pushed the little lines at the the top to create a list format. My events all disappeared and now I can not get anything back or add anything back. June reappeared and I can renter anything in July or August. I would like to undo this list format and return to my previous calendar view? Does anyone know what I am talking about?
tap again and choose the format month or let it be the day.
-
I've encoded a vinyl LP record into digital format and recorded it onto an usb as MP3 file. But when I tried to copy it onto my ipod classic, I get a message stating "was not copied to the ipod because it cannot be played on this ipod". Why?
I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
tt2 -
2 probs! HDD Formatted and no recovery discs and "1962 NO Operating System" error message
Hi, I have had my Lenovo Idecentre B540 for approx 2 weeks now and my hard drive had to be formatted and windows reinstalled. However, this means the partition is lost and i had no recovery disc or drivers disc with it so have been unable to get the touchscreen working and probably missing out on all the features that were the reasons for buying this machine.
Running Windows 7 home premium and have downlaoded all the drivers from the support page on here but nothing there for the touch panel drivers and cant find it or ideatouch 4.5 online either.
I would like a disc sending to me or a link to be able to downlaod please.
Also now i have had
"1962 no operating system" error message when booting. ANy known reason for this? Lots of guesses online but no concrete answer.You might look at this thread and you might also do a search: http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/LENOVO-IDEACENTRE-B540-ONE-KEY-RECOVERY...
Maybe you are looking for
-
TS3988 'Valid Apple ID but not an Icloud account
I have downloaded iCloud onto my PC and when I try to sign in the following message appears 'This is a valid Apple ID but not an iCloud account.' What can I do? Thanks.
-
1st generation ipod nano sync help
I have a 1st generation iPod nano that was given to me - I want to delete the current music and sync my own iTunes - help!
-
Database restore from SQL 2000 to SQL 2005 for SBO 2005B
Hi Everyone, I am facing some problems in regards to the restore of SBO Database from SQL 2000 to SQL 2005. Let me explain you the problem. See I am using SAP B1 2005B with patch level 38 in my laptop with SQL 2000. I have made an company in this and
-
Receipt page tags not rendering?
I'm implementing Google Analytics ecommerce tracking in the receipt page. I need to use these tags: {tag_orderid}, {tag_amount}. But when I view the html source from the browser, the tags are still there. They didn't change to values. Is there an
-
How to check to which sold-to a ship-to is linked to?
Hi experts, I am new here. A simple question, how am I able to check to which sold-to ID a ship-to is linked to as all I have is the ship-to party ID only. Thank you in advance!