"formatting Document" hangs when opening page in GLCS using XP Pro

I've just installed GoLive CS on a new computer running XP Pro, (4 gigs memory (really 3.5), Core2 Quad processor). My old computer's OS was W2K and it ran GLCS wthout any issues. With the new system, when opening a page from the site folder an "Open Document" window pops up with a message saying "formatting document." This window hangs, it won't close and the progress bar remains empty. It seems to be stuck.  The pop-up doesn't go away until GoLive is closed. This never happened when running under W2K on the old computer, it has only showed up since using XP Pro on the new computer.
Does anyone have a suggestion on where to start troubleshooting this issue. Obviously, I cannot work on my site until this litte quirk goes away. Your help is most appreciated.
Carol

This is additional information I've discovered since posting the original message. It appears that the pop-up is a status window that shows the current task when working on a page. As mentioned in my original message, I never saw this when using the W2K OS, so I'm thinking it must be an XP related thing. How can I turn this off? I've been thru preferences and all the view settings, but have not found the key to getting rid of the status window, short of closing GoLive.
The attached image shows the pop-up window.
And thanks to Kate (if I remember correctly), I've signed up for the GoLive disucssion at Lasso and will post this question there once I figure out how to post queries.
Carol

Similar Messages

  • Microsoft Word Hangs When Opening Document From SharePoint 2010 Document Library

    I am running into an issue where Word hangs when opening certain files from a document library.  When the issue occurs, Word opens and hangs at the Downloading <Doc URL> stage.  I have tried disabling the SharePoint plugins in IE and that
    makes no difference.  I can download a local copy of the file and open in just fine.  The file in questions exists in a separate document library where it can be opened just fine (The file was copied to the library where the issue is occurring by
    a Workflow).  The issue also has only occurred on .docx files and not .doc, however, not all docx files are having the issue.
    Does anyone have any thoughts on what might be causing this?
    Thanks.

    Hi,
    According to your post, my understanding is that when you opened a certain files from a document library, it hanged at the downloading stage.
    I tried to reproduce the issue, after coping by a workflow, the .docx files opened well in my environment.
    Did the issue occur in other documents libraries? You can copy the files to a new documents library by workflow, then check whether it works.
    For more details we also can check the SharePoint ULS logs.
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
    Have you check your IE settings (Tools->options->connections->LAN settings->uncheck Automatically detect settings).
    Please also use fidder tools to detect the process. You can download it by the following link.
    http://fiddler2.com/
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • InDesign CS6 (8.1) hangs when opening documents, intermittent

    InDesign CS6 (8.1) hangs when opening documents, intermittent, and a document that hangs InDesign, after restarting InDesign, will open fine. I found the following track, Re: InDesign CS5.5 Not Responding  for instructions to "force a hang into a crash" and am posting the crash logs to  pastebin.com
    This is the sample process report OPI_Sample9MAY15 - Pastebin.com
    This is the corresponding InDesign Crash log OPI_InDesignCrashLog9MAY15 - Pastebin.com
    I am hoping that someone might be able to read the logs and tell me what is causing InDesign to hang
    For more background information we are using Mac OS X 10.10.3, Within indesign we are using an editorial management software called "NewsEngin GPS" that utilizes Rohohiko's ADIP ToolAssistant plugin and an advertising management plugin "Pagelink" from Mactive/NewsCycle Solutions. These are the only 3 third party vendors that are being used and of course all claim that their products separately are stable under Mac OS 10.10 and InDesign CS6 v8.1.

    Did you try to export the INDD file to IDML, open that and work with the new files?

  • Photoshop CS3 Hangs when opening files

    PS hangs when opening, duplicating images. The longer it's on the longer the wait. I'm talkin' 15 - 20 seconds. Deleted the prefs multiple times.
    Anybody else having this problem?

    Set your default printer to something local, that is actually hooked up.
    When Photoshop creates the document, it asks for the default printer information - and your printer driver is taking a nap while trying to connect to the printer.

  • Dreamweaver hangs when opening

    Running DW MX 2004, with updater 7.0.1 applied, on a Sony PC
    with Win XP, DW hangs when opening. I have waited as long as 10
    minutes to see it it every responds, and it doesn't.
    I have to CTRL-ALT-DEL and terminate the application. When
    re-opening, it opens normally.
    Not connected to a network, site files on local C drive.
    It seems to have started happening after applying the 7.0.1
    updater.
    Anyone have any solutions to this?

    Hi JillTW,
    DW 7 had some serious time lags. Search the
    Macromedia.Dreamweaver groups on
    Google's groups for slow DW and look for postings over a year
    old. The fixes
    they discuss may help solve your lockup problem.
    If you are working on a large site, 10 minutes might not be
    enough time for
    DW 7 to resolve cache issues. Look at your Task Manager to
    see if it is
    working (high cpu usage on Dreamweaver.exe) or not
    responding. Even if it is
    not responding a high CPU usuage may mean it is in progress
    and just
    ignoring the keyboard/mouse.
    Also, you might want to try to clear the site cache (or just
    check its
    size - a little one should not take long to process even if
    corupt) before
    starting DW. Adobe tells how to remove the cache here:
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=5989f7f4
    Look for the cache in: C:\Documents and
    Settings\<user>\Application
    Data\Macromedia\Dreamweaver MX 2004\Configuration\SiteCache
    The file is named: {yoursitenamehere}.dws
    I suggest moving it to another folder for safe keeping until
    you know if
    this is the problem.
    Upgrading to DW8 is a major improvement in speed.
    Best of luck,
    Alan C
    alan (a t) cates-associates (d ot) net
    http://www.cates-associates.net
    "JillTW" <[email protected]> wrote in
    message
    news:e81a5o$cpf$[email protected]..
    > Running DW MX 2004, with updater 7.0.1 applied, on a
    Sony PC with Win XP,
    > DW
    > hangs when opening. I have waited as long as 10 minutes
    to see it it every
    > responds, and it doesn't.
    >
    > I have to CTRL-ALT-DEL and terminate the application.
    When re-opening, it
    > opens normally.
    >
    > Not connected to a network, site files on local C drive.
    >
    > It seems to have started happening after applying the
    7.0.1 updater.
    >
    > Anyone have any solutions to this?
    >

  • Dreamweaver CS6 hangs when opening file

    Starting recently Dreamweaver CS6 hangs for 30 seconds or more, sometimes saying not responding, when I open an HTML file. It appears to do this when the file contains links to external places. To test I created a file that contained nothing except the "new HTML file" basic headers, saved the file, then opened. This test file did not hang.
    I have tried the registry fix "ResolveRemoteURLToIPAddress FALSE" and deleting the personal configuration directory (with Dreamweaver closed). Neither of these solved the problem. Dreamweaver still hangs when opening a file.
    Any other ideas?
    Barry.

    Once the document opens, check the code for any protocol relative links (links that start with // rather than http://) and change them to http:// links, at least during development. It is a know issue to Adobe and will cause what you describe.
    If you don't have any protocol relative links, links to third party sites can cause issues from time to time if their servers are slow or have any kind of conflict with your network. Unless you absolutely can't, you may want to copy those external scripts to your local site and link to the local versions instead, again, during development.

  • Office 2013 applications cannot be made to show the "Documents" folder when opening and saving files

    (Windows Server 2012R2 and Windows 8.1 PRO)
    We are redirecting the user's "Documents" folder to the network (using Folder Redirection). The OS hides this fact however, and most applications simply see the "Documents" folder when opening or saving files, including Office 2003.
    Office 2013 however displays the actual path, which in this case is:
    \\sever1\redirect$\username\documents
    Even if you forcibly set the "Default local file location:"  in the Options Save area to the 'Documents' folder in, say, Word, Word immediately converts the local path to the network path.
    Is there anyway to get Office 2013 to follow the virtual path? All of other apps follow it and expose the users only to "Documents".
    Thank you so much.
    Dana

    There's nothing in my FAQ concerning screen savers, so I'm unsure why you decided to take that approach. From your description, it looks like you only tried a few of the suggestions before throwing in the towel. That's fine, it's your call.
    I don't have the problems you described with 10.4.7. Usually when folks have problems after an update, these are caused by either installing an update on an already-corrutped system or they've installed third-party applications or hardware that have been rendered incompatible by the update.
    Before installing software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • JDeveloper 11.1.2.3 hangs when opening project from JDeveloper 11.1.1.6

    Hello! I have a problem here which I can't solve. I also asked this question here: http://stackoverflow.com/questions/14365031/jdeveloper-11-1-2-3-hangs-when-opening-project-from-jdeveloper-11-1-1-6/14369211#14369211 . The whole story in short. I have a JavaEE client-server project in JDeveloper 11.1.1.6, where it works like a charm. Recently I had to upgrade JDeveloper version to the latest 11.1.2.3. The first problem was that the standard procedure of migrating project from the older version of JDeveloper to the newer one did not help: IDE was hanging forever all the time with no apparent (for me) reason, log file was silent about that. Then I tried another way: I just created the same project from the beginning and put there all necessary source files, libraries, set project properties etc. Still nothing, but now found the way to obtain a kind of error at least. I ran C:\Oracle\Middleware\jdeveloper\jdev\bin\jdev.exe from the command line and got the following (e.g. when I started running debug):
    Jan 16, 2013 8:52:09 PM oracle.ideimpl.runner.StarterFactoryDescriptionImpl logError
    SEVERE: Incorrect hash-structure value in starter-factory definition
    Jan 16, 2013 8:52:10 PM oracle.ideimpl.runner.StarterFactoryDescriptionImpl logError
    SEVERE: Incorrect hash-structure value in starter-factory definition
    But I don't know what could be the next step... Could anyone help me? Thanks in advance for your attention!
    Edited by: user12144197 on 22.01.2013 0:42

    Hi,
    not sure if you have a support contract or work for Oracle. In both cases the best option is to file a bug (service request)
    Frank

  • Adobe reader XI crash and hangs when open the pdf file

    After update the adobe reader xi 11.0.10, the reader always crashes and hangs when open the pdf file. Please help me how to do.

    Ben Leung wrote:
    HThis situation is started after I clear the pop up advertisement.
    What kind of advertisement?  In Adobe Reader?  Can you post a screenshot of that: https://forums.adobe.com/thread/1070933
    Regarding the crash, can you try disabling Protected Mode through the registry: download, unzip, then run the registry script https://files.acrobat.com/a/preview/49eeb48b-07c5-4502-984c-8a25259914fa

  • I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

    I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

    Hi rmarchione,
    Can you try restoring preferences and let us know if it helps?
    Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
    Thanks,
    Preran

  • Latest Reader Hangs when opening any pdf with 'tools' selected

    Any pdf will hang when opened in the latest Acrobat Reader (Either from file or open Acrobar Reader first.)
    However if I first open Reader and turn off the tools (Tools top right) I can then open any pdf without problems.
    Users who want to have the tools bar open are querying this.
    Can anyone help.
    Windows 7 64 bit systems.

    Try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

  • After installing the latest upgrade firefox just hangs when opening - was fine before. have tried deleting restore session but worse not better now

    after installing the latest upgrade firefox just hangs when opening - was fine before. have tried deleting restore session but worse not better now. no change with firewall.
    == This happened ==
    Every time Firefox opened
    == yesterday, after installing the upgrade ==
    == User Agent ==
    Opera/9.80 (Windows NT 5.1; U; en-GB) Presto/2.5.24 Version/10.54

    I'm using Mac OS 10.4.11 & even typing this message the characters appear so slowly that I could get a hammer and chisel and inscribe the words faster than the new Firefox runs. WTF?

  • Please a solution against crashes when opening a file with Acrobat XI pro?

    Hello,
    Am a member of Adobe Creative Cloud.
    Am also constantly having crashes when opening a file with Acrobat XI pro.
    Am running on Windows 7 Home Premium, Service Pack 1, 64 bit - RAM 20 GB -
    The crash happens systematically after the installation of the update. Within one day I uninstalled and reinstalled the program 4x! It takes of a lot of my time.... Thank you for providing a definitive solution!
    Best regards

    I've been having the same issue!  I try to open it and it crashes - says re-open, it crashes...  I re-installed it yesterday and it opened and worked fine.  Closed it out at the end of the day thinking everything was finally fine but this morning the same crashes it had yesterday...  HELP!!!

  • I always got error message when opening BlackBerry App World using 3g

    Hi there, I always got error message when opening BlackBerry App World using 3g network, but it's fine if I open it through wifi network. Does anyone ever had the same problem and how to fix it? Thanks.

    You need the latest version of BlackBerry World installed on your smartp

  • How to open Facebook in china using MacBook Pro?

    hello, please to resolve on how to open facebook in China using MacBook Pro.
    Many thanks to all!

    You can't. Want more GPU? You'll have to purchase a new computer.

Maybe you are looking for

  • Error when transporting 0MATERIAL Infoobject to Production server

    Hi, When I am transporting 0MATERIAL to production I am getting this error "Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode) An exception with the type CX_RS_SQL_ERROR occurred, but was neither handled l

  • Best / most popular software or scripts for adding search function to website?

    I'm trying to find a good piece of software or script for implementing a site search function into our website.  I am relatively knowledgeable in Dreamweaver and can write CSS and XHTML at the fairly intermediate to advanced level, as well as work wi

  • Tidy xml: clean xml data source form and characters

    Hi, the xml data set that I'd like to display with spry includes many special characters such as < and >, which are also used by xml to separate the individual data elements. How can I replace those when the data are read, so that the data display co

  • Spring-iBatis-Oracle data access

    Hi all, I've just spent hours on a problem which appears unsolvable. Hope someone can clarify. I have constructed a view in my oracle database which uses data from other oracle databases. In SQLDeveloper the queries work fine. Now, I programmed my ap

  • Help printing to pdf but not saving

    I am currently using Acrobat X Pro and I need to email out travel orders daily to multiple people. But, I do not have a need to save these files prior to emailing.  Is there a way to send the pdf without saving first ?  Any help would be appreciated.