Formatting output field to derive Record Throughput (Records Per Second)

It's been so long long that I've done this I am seeking some guidance.
The business problem I have is to derive a new calculated field to determine Throughput (Records Per Second)
Formula: (((batch_job_execution.end_time - batch_job_execution.start_time) * (24*60))) / (write_count)
The Results from above basically give me a Time Formatted Field and I am seeking an Intgerger field.
I take it I need to do a CAST or other type of formatting function(s) and it most likely needs to be broken down
within the calculated field above.
If someone can provide some guidance as how best to approach this problem, that'll be GREAT!!
If I need to provide some more information, please let me know as well.
Sincerely,
George

Hello again,
I attempted to use the TIMESTAMPDIFF function and I am receiving error ORA-00904 invalid identifier.
I do not find this function in my Oracle SQL book so I'm assuming this might be a function that was created internally
within your enterprise. Please correct me if I am wrong. This may have to be the path I take. (Create a FUNCTION to perform TIMESTAMPDIFF processing)
Again, this is just some of my thoughts based on my research and I could be far off.
Please advise or confirm my suspicions.
Thanks
George

Similar Messages

Insert 1000 records per second

I need to insert 1000 records in mysql database what is the best approach
i will get the requests from a through a http url currently we are using http server to handle the incoming requests

This thread was originally posted to the Java Database Connectivity (JDBC).
It appears to be off-topic for that forum.
It has been moved to a database sub-forum, hopefully for closer topic alignment.

Getting a field from a derived record

I have been asked to put a value on a page that seems to be part of a PS-supplied derived record in Campus Solutions, derived_cs. My understanding is that derived records are built on the fly. I can see in App Designer what table is used for a prompt for the field I care about but since the field is part of a derived record, I don't see anything in the PeopleCode for the field for where its value gets written to. How do I figure out where the values entered on a page in fields of a derived record go? I need to get the real value. I don't want to try to reconstruct the derived record in my custom app. Thanks.
Ken

Derived/work records allow you to display the values of variables on pages. As you noted, they don't have database compliments. In other words, Derived/Work record field values are not persisted. This makes it difficult to determine where the values come from and, if they are data entry fields, where the values go. The movement of the data to and from a Derived/Work record is all done in PeopleCode. To find where the values come from, I usually start with an SQL trace level of 7. You can also use an SQL trace to determine where the values go. The nice thing about Derived/Work values that are persisted is that you will see values in the SQL insert bind variables. Unfortunately, when reading data from the database, you only see bind variables, you don't see the values that were selected. This makes finding where data comes from very difficult.

Display output fields in Hierarchy format in ALV report

Hi,
I have a requirement to display the output fileds in ALV report, the output format is like this . The output field should be in ALV format, under each purchase order its corresponding line item should appear.
Pruchase Order 4700000581
company code        item
        9001                     10
        9001                     20.
        9001                     30.
Pruchase Order 4700000174
        9001                     10
        9001                     20.
Can any one please help me how to do this in ALV report.

Hi
This can be achieved using the Heirarchial ALV list
see the sample and do it
REPORT ZALV5_OBJECTS.
TABLES : EKKO.
TYPE-POOLS : SLIS.
TYPES : BEGIN OF TY_EKKO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
STATU TYPE EKPO-STATU,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
MENGE TYPE EKPO-MENGE,
MEINS TYPE EKPO-MEINS,
NETPR TYPE EKPO-NETPR,
PEINH TYPE EKPO-PEINH,
END OF TY_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
IT_EKPO TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
IT_EMPTYTAB TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
WA_EKKO TYPE TY_EKKO,
WA_EKPO TYPE TY_EKKO.
DATA: OK_CODE LIKE SY-UCOMM, "OK-Code
SAVE_OK LIKE SY-UCOMM.
*ALV data declarations
DATA: FIELDCATALOG TYPE LVC_T_FCAT WITH HEADER LINE.
DATA: GD_FIELDCAT TYPE LVC_T_FCAT,
GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
GD_LAYOUT TYPE SLIS_LAYOUT_ALV.
*ALVtree data declarations
CLASS CL_GUI_COLUMN_TREE DEFINITION LOAD.
CLASS CL_GUI_CFW DEFINITION LOAD.
DATA: GD_TREE TYPE REF TO CL_GUI_ALV_TREE,
GD_HIERARCHY_HEADER TYPE TREEV_HHDR,
GD_REPORT_TITLE TYPE SLIS_T_LISTHEADER,
GD_LOGO TYPE SDYDO_VALUE,
GD_VARIANT TYPE DISVARIANT.
*Create container for alv-tree
DATA: GD_TREE_CONTAINER_NAME(30) TYPE C,
GD_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
*Includes
*INCLUDE ZDEMO_ALVTREEO01. "Screen PBO Modules
*INCLUDE ZDEMO_ALVTREEI01. "Screen PAI Modules
*INCLUDE ZDEMO_ALVTREEF01. "ABAP Subroutines(FORMS)
*Start-of-selection.
START-OF-SELECTION.
ALVtree setup data
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_FIELDCATALOG.
PERFORM BUILD_LAYOUT.
PERFORM BUILD_HIERARCHY_HEADER CHANGING GD_HIERARCHY_HEADER.
PERFORM BUILD_REPORT_TITLE USING GD_REPORT_TITLE GD_LOGO.
PERFORM BUILD_VARIANT.
Display ALVtree report
CALL SCREEN 100.
*& Form data_retrieval
text
--> p1 text
<-- p2 text
FORM DATA_RETRIEVAL .
SELECT EBELN
UP TO 10 ROWS
FROM EKKO
INTO CORRESPONDING FIELDS OF TABLE IT_EKKO.
LOOP AT IT_EKKO INTO WA_EKKO.
SELECT EBELN EBELP STATU AEDAT MATNR MENGE MEINS NETPR PEINH
FROM EKPO
APPENDING TABLE IT_EKPO
WHERE EBELN EQ WA_EKKO-EBELN.
ENDLOOP.
ENDFORM. " data_retrieval
*& Form build_fieldcatalog
text
--> p1 text
<-- p2 text
FORM BUILD_FIELDCATALOG .
Please not there are a number of differences between the structure of
ALVtree fieldcatalogs and ALVgrid fieldcatalogs.
For example the field seltext_m is replace by scrtext_m in ALVtree.
FIELDCATALOG-FIELDNAME = 'EBELN'. "Field name in itab
FIELDCATALOG-SCRTEXT_M = 'Purchase Order'. "Column text
FIELDCATALOG-COL_POS = 0. "Column position
FIELDCATALOG-OUTPUTLEN = 15. "Column width
FIELDCATALOG-EMPHASIZE = 'X'. "Emphasize (X or SPACE)
FIELDCATALOG-KEY = 'X'. "Key Field? (X or SPACE)
fieldcatalog-do_sum = 'X'. "Sum Column?
fieldcatalog-no_zero = 'X'. "Don't display if zero
APPEND FIELDCATALOG TO GD_FIELDCAT.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'EBELP'.
FIELDCATALOG-SCRTEXT_M = 'PO Iten'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 1.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'STATU'.
FIELDCATALOG-SCRTEXT_M = 'Status'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 2.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'AEDAT'.
FIELDCATALOG-SCRTEXT_M = 'Item change date'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 3.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MATNR'.
FIELDCATALOG-SCRTEXT_M = 'Material Number'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 4.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MENGE'.
FIELDCATALOG-SCRTEXT_M = 'PO quantity'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 5.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MEINS'.
FIELDCATALOG-SCRTEXT_M = 'Order Unit'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 6.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'NETPR'.
FIELDCATALOG-SCRTEXT_M = 'Net Price'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 7.
FIELDCATALOG-DATATYPE = 'CURR'.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'PEINH'.
FIELDCATALOG-SCRTEXT_M = 'Price Unit'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 8.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
ENDFORM. " build_fieldcatalog
*& Form build_layout
text
--> p1 text
<-- p2 text
FORM BUILD_LAYOUT .
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-TOTALS_TEXT = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'
ENDFORM. " build_layout
*& Form build_hierarchy_header
text
<--P_GD_HIERARCHY_HEADER text
FORM BUILD_HIERARCHY_HEADER CHANGING
P_HIERARCHY_HEADER TYPE TREEV_HHDR.
P_HIERARCHY_HEADER-HEADING = 'Hierarchy Header'(013).
P_HIERARCHY_HEADER-TOOLTIP = 'This is the Hierarchy Header !'(014).
P_HIERARCHY_HEADER-WIDTH = 30.
P_HIERARCHY_HEADER-WIDTH_PIX = ''.
ENDFORM. " build_hierarchy_header
*& Form build_report_title
text
-->P_GD_REPORT_TITLE text
-->P_GD_LOGO text
FORM BUILD_REPORT_TITLE USING PT_REPORT_TITLE TYPE SLIS_T_LISTHEADER
P_GD_LOGO TYPE SDYDO_VALUE.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
LD_DATE(10) TYPE C.
List Heading Line(TYPE H)
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
ls_line-key "Not Used For This Type(H)
LS_LINE-INFO = 'PO ALVTree Display'.
APPEND LS_LINE TO PT_REPORT_TITLE.
Status Line(TYPE S)
LD_DATE(2) = SY-DATUM+6(2).
LD_DATE+2(1) = '/'.
LD_DATE3(2) = SY-DATUM4(2).
LD_DATE+5(1) = '/'.
LD_DATE+6(4) = SY-DATUM(4).
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Date'.
LS_LINE-INFO = LD_DATE.
APPEND LS_LINE TO PT_REPORT_TITLE.
Action Line(TYPE A)
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
CONCATENATE 'Report: ' SY-REPID INTO LS_LINE-INFO SEPARATED BY SPACE.
APPEND LS_LINE TO PT_REPORT_TITLE.
ENDFORM. " build_report_title
*& Form build_variant
text
--> p1 text
<-- p2 text
FORM BUILD_VARIANT .
Set repid for storing variants
GD_VARIANT-REPORT = SY-REPID.
ENDFORM. " build_variant
Reward points for useful Answers
Regards
Anji

Make a field required on record creation, read only after that

Hello,
Does anyone know of a way to make a pick-list field required on record creation, but read-only after that? The other twist to this is that we need to allow this field to also be read-write for all the integration edits, since this field's value could change in the enterprise database.
Thanks,
Neal G.

Hi !
I think you can add a validation rule for that. Something like :
IIf(PRE('<YOURFIELD>') IS NULL, <> '', = PRE('<YOURFIELD>'))
This means that if the previous value of your field is null (it's a creation), so the value must be different than blank. Else, it must be equal to the previous value, so not modified.
I didn't tested it, but I let you get back to me if it works... or not !
You'll just have to add a message saying that this field is required on creation and readonly after...
Hope this will help, feel free to ask more !
Max

How to use grouping by field and have a tatol of records per group

Dear All
I have a repiort that i have created but i want code that allows me to group the report by a certain field then i give a tatol number of records per each group.
Thank you in advance
William

Hi William,
Lets suppose itab be the final internal table u are displaying.
First sort this by the group field.
Now,
declare a variable g_grp.
data : g_grp(10) type c.
loop at itab.
at new group.
g_grp = itab-group + g_grp.
endat.
at end of grp.
write g_grp.
clear : g_grp.
endat.
endloop.
Regards,
Sai

Addition of user defined fields in Results Recording screen (QE01)

HI All,
We've a business requirement to add user defined fields in results recording screen (Character Overview screen - QE01), so that the user will enter data in user defined fields during results recording. and the data entered in user defined fields should be saved in data base table along with actual results given by the user in order to retrieve data for reporting purpose.
Please suggest valuable solutions to acheive the requirement.
Thanks & regards,
rajesh

Hi Sujit,
Thanks for your reply,
We've tried using the " QEEM0029 User-Exit for Characteristic Overview Subscreen , however with "QEEM0029" exit, we are only able to add fields to the characteristics overview screen and there is no provision in this exit to save the data entered in the user fields to a table (QALS,QAMR, QASE).
Please suggest!
Thanks & regards,
rajesh

Can new cutsom currency fields on User Records be used for SOD Analytics?

We will have new cutsom currency fields on User Records. Can we utilise these new custom fields for dashboard reporting using SOD Analytics?

Hi
Yuo can try to use FOR ALL ENTRIES option.
IF you have:
WERKS BTRTL
Z002 Z001
Z002 Z002
Z003 Z001
Z003 Z002
You should do something like that:
DATA: BEGIN OF <TAB_SEL> OCCURS 1,
       WERKS TYPE WERKS,
       BTRTL TYPE BTRTL,
      END   OF <TAB_SEL>.
WERKS BTRTL
<TAB_SEL>-WERKS = 'Z002'. <TAB_SEL>-BTRTL = 'Z001'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z002'. <TAB_SEL>-BTRTL = 'Z002'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z003'. <TAB_SEL>-BTRTL = 'Z001'.
APPEND <TAB_SEL>.
<TAB_SEL>-WERKS = 'Z003'. <TAB_SEL>-BTRTL = 'Z002'.
APPEND <TAB_SEL>.
SELECT * FROM <TABLE> INTO TABLE ITAB
   FOR ALL ENTRIES IN <TAB_SEL>
                   WHERE WERKS = <TAB_SEL>-WERKS
                      AND BTRTL = <TAB_SEL>-BTRTL.
In this case you need to fill correctly the internal table <TAB_SEL> with the all combinations.
Max

Additional Field for Condition Record ..............

Hi Gurus
Plz read the Question Properly
I know that for adding a new field as key field for condition record , one needs to append the structure( main ) KOMPAZ so that the field appears in KOMP structure .
Say want Shiiping Point as one of fields in Condition Records. ....VSTEL field
Now when the field appears in KOMP , then we can CREATE CONDITION RECORD FOR THE SAME
FOR EG: *SALES ORG - DISTRIBUTION CHANNEL-CUSTOMER-SHIPPING POINT-MATERIAL..... BASED MATERIAL PRICING
WHAT I FAIL TO UNDERSTAND
1.WHY WE PASS SHIPPING POINT ( VSTEL) FIELD FROM LIKP -VSTEL TABLE TO NEW FIELD DEFINED.
2.LIKE SALES ORG/ DISTRIBUTION CHANNEL ALSO ARE DEFINED IN ENTERPRISE STRUCTURE AND VALUE IN CONDITION RECORD IS PICKED FROM THERE ONLY, WHY NOT SHIPPING POINT.
WHY THIS ??????....
Supply the new field you defined by including the following source code line in
USEREXIT_PRICING_PREPARE_TKOMP:
MOVE xxxx-VSTEL TO TKOMP-ZZVSTEL.
In order processing you find the user exit in Include MV45AFZZ, and in billing document processing you find it in Include RV60AFZZ.
Regards
Rohit

> Plz read the Question Properly
I read the question properly ;-).
> WHAT I FAIL TO UNDERSTAND
>
> 1.WHY WE PASS SHIPPING POINT ( VSTEL) FIELD FROM LIKP -VSTEL TABLE TO NEW FIELD DEFINED.
The first thing you need to understand is that the condition records value is not based upon the the enterprise structure which you have defined. Rather it will pick value from the sales documents which we have created. The reason behind including this LIKP-VSTEL is that only, Just imagine, where you are using condition records??? in Sales order, in delivery, in billing..... and based on the data passed in these documents your condition records will be populated.
Again for example : you have maintained record for Sales org 1000, DC 10, division 00 shipping point 1000 then the record will come into the document provided the document should fulfill these all.
I hope this will make you understand this.
> 2.LIKE SALES ORG/ DISTRIBUTION CHANNEL ALSO ARE DEFINED IN ENTERPRISE STRUCTURE AND VALUE IN CONDITION RECORD IS PICKED FROM THERE ONLY, WHY NOT SHIPPING POINT.
No the records are only coming from the Sales documents. only.
Thanks,
Raja

Displaying a field in a record as empty ...

I would be very grateful if someone could help with the following query.
I have a table (*tbl1*), which contains the following columns:-
tbl1_unique_id (NUMBER);
tbl1_title (VARCHAR2 (255));
tbl1_description (VARCHAR2 (4095));
tbl1_date (DATE).
I have created an 'Interactive Report' and a 'Form' so that information can be entered into the table as well as viewing a list of the records that have been created previously.
When viewing a particular record using the 'Form', rather than displaying the actual contents of tbl1_description in a Textarea, I would like to display the field in such a way that it appears to be empty.
Additionally, when any text is entered into the apparently empty Textarea of the tbl1_description field and the 'Apply Changes' button is pressed, the information entered into the Textarea over-writes the current contents of the field in the record.
I have tried setting the 'Source Type' of the Textarea to 'Always Null' and while this gives the appearance that the tbl1_description is empty, any text that is entered into the Textara is not recorded in the tbl1_description field when the 'Apply Changes' button is pressed.
Any help anyone can provide with regard to this query will be appreciated.

Hi,
I think this field is avaialble in only one cube . Am I right?
Asume that Cube 1 has recrods like the below:
F1--F2--
KF1
a--q--
100
b--m--
200
Asume that Cube 1 has recrods like the below:
F1--F3--
KF2
s--t--
10
b--r--
20
So MP will get records like below:
F1--F2F3KF1-----KF2
a--q#100--
0
b--m#200-----0
s--#t0--
10
b--#r0--
20
SO if you take Field F2 only into the report, you will records like
q
m
SO if you take Field F3 only into the report, you will records like
t
r
SO if you take Field F2 and KF2only into the report, you will records like
30
SO if you take Field F2 and KF1only into the report, you will records like
a----
100
b----
200
Here it will ignore records which has value 0 for KF1.
With rgds,
Anil Kumar Sharma .P

Can a field validation point to fields of another record type?

Field Validation based on another Record Type Field
I am trying to build validation into a custom object that sums fields under the Account record type.
The names of the fields from OBI (the table location and field name):
"- Account Custom Metrics".S_INT_13+"- Account Custom Metrics".S_INT_14+"- Account Custom Metrics".S_INT_11
My questions: can a field validation point to fields of another record type? My thought was that if OBI can look across record types than all of CRM should be able to, including field validations.
Thank you,
David

Hi !
I'm afraid this is not possible for the moment. You'll have to wait for the Release 16 I think to have such possibilities.
The R16 will allow you to create workflow rules accross different record types (e.g. Create a task on the Account linked to the service request when a new service request is created). I hope there will be the same possibilities with the validation rules...
Hope this will help, feel free to ask more.
Max

Hi, plz help me. i wanna store photos to sql database. so how to insert file field into insert record in dreamweaver cs3?

I dont know how to insert file field into insert record in DW. i also want to know, insert dynamic table with image field. Plz help me anyone. Ty..

ohh kk thank you bro. But How to store photos to server file. I wanna upload and display the photos in webpage. Can you send me the php code for this?

How to edit LOV of the status field in activity record type?

Hi experts
I just want to edit the list of values of status field in activity record type, it is a read only filed, can anyone tell me if it is possible to edit? seems like it is referenced from a field called "EVENT_STATUS";
Thanks,
Tiger

Tiger, at this time it is not possible to edit the values in this field.

Validate 2 E-mail address fields in insert record form

Hello,
I have used the Insert Record Form Wizard to create a form, including using the Validate Form Server Behavior to validate many fields.
I can't figure out how to compare & validate 2 E-mail address fields.
After the form was created I opened the existing Validate Form Server Behavior - Advanced tab and built the condition {sub_email2} != {sub_email} but this had no affect on submitting the form.
The other thing I tried was creating a new Compare Transaction Field behavior with the same condition {sub_email2} != {sub_email}, this also seemed to have no affect.
I am just a beginner, so I admit to not really knowing what I'm doing, for me ADDT has been a great aid.
The other thing I noticed, when I tried both the items above, besides not affecting being able to submit the form with different E-mail addresses. The red asterisks indicating a required field, would disappear.
Here is the form http://www.oescahealthregistry.org/forms/pedigree_submission.php this version of the form does NOT include either of my attempts to validate the E-mail fields.
Thanks in advance for your help.
Dennis

Hi,
A compare statement should work fine. As an example I made small form that inserts name and email (2 fields) using Insert record wizard.
Name field is required, email field is required and checks that its a valid email structure ([email protected]). I then finish the wizard.
<input type="text" name="email" id="email" value="<?php echo KT_escapeAttribute($row_rsemail['email']); ?>" size="32" />
<?php echo $tNGs->displayFieldHint("email");?> <?php echo $tNGs->displayFieldError("email", "email"); ?>
I then add the extra field to the form that the 2nd email will be entered into, this one I called email2, I then copied the display hint and fielderror code from the first email and placed it behind the 2nd email box and changed the text to reflect email2. Which probably doesnt matter but I put it there anyway.
<input name="email2" type="text" id="email2" size="32" />
<?php echo $tNGs->displayFieldHint("email2");?> <?php echo $tNGs->displayFieldError("email2", "email2"); ?>
Now that I have both email fields in the form, I go to the developer tools under server behavior and select compare transactions fields under form validation.
I hit the + to add a field I then choose email for field, then == for condition, then {POST.email2} for compare to. I enter in an error message and hit ok.
Thats it the form is ready.
The first email field will check against email validation and the 2nd email will check against the first email.
I hope that helps.
Take note that the database actually only has 2 fields to enter data. Then 2nd email field is only for validation.
Message was edited by: Albert S.

Change the content of a field for a record in table

Dear guru ,
i know that there is chance to change the content of a field for a record in table using SE16 for the table involved and debugging.
Can you explain me the flow to run this ?
Thanks.

>
CONS SAP wrote:
> Dear guru ,
> i know that there is chance to change the content of a field for a record in table using SE16 for the table involved and debugging.
> Can you explain me the flow to run this ?
> Thanks.
Hi CONS SAP,
You can use se16n transaction. This is very user friendly trnasaction. You may use it like this:
1) Start transaction SE16n.
2) Type the table name and press ENTER.
3) Type the string "&sap_edit" into the command line and press Enter.
4) Enter your selection criteria and press F8.
Now you can easily change/delete/add the lines you want and then save.
All Changes are recorded in the tables SE16N_CD_DATA and SE16N_CD_KEY.
But I would request you to keep in mind the suggestions from Vijay Babu Dudla
>
Vijay Babu Dudla wrote:
> if you are trying on some test table then it is ok. but don't update any transactional data like that. it is not good practice.
>
Many regards,
Ravi.

Formatting output field to derive Record Throughput (Records Per Second)

Similar Messages

Maybe you are looking for