Formmail will not "submit" with FF...IE works fine...HELP!

Hi;
I'm using matt's script archive for formmail. Here's the links:
http://www.timemachinewatch.com/email.html (ORDER LINK...does NOT work with FF only IE)
http://www.timemachinewatch.com/request.htm (REQUEST LINK...DOES work with FF)
One page (SEE LINK ABOVE) (REQUEST) works fine, the link above (ORDER) will not.
Both are almost identical, and formmail is the same code on BOTH
This just happened abt a month ago, was always working with FF last 10 years
CLICK THE LINKS ABOVE. THEN HIT THE "SEND" BUTTON ON PAGE. See if you guys can submit it with FF on order link or hopefully offer
a solution. You can right click the page for page source to see the code.
No I am NOT going to update the FF Browser...been there, done that, FF 14.0 works fine for me and I am keeping it. Not an update issue here as neither would work otherwise
Here's hoping! Thanks in advance
Tom Dunn
TIME MACHINE

There are problems with nesting tags on the email page and Firefox closes the form tag before the actual input fields start (only the hidden input fields are in the form), so the submit button isn't part of the form
You can see that with the built-in Inspector.
*https://developer.mozilla.org/Tools/Page_Inspector
You can see in the page source a lot of tags marked in red to indicate that there is a problem with them and you need to check the code and make sure to close all tags in the order that they are opened.
<pre><nowiki>
<center><b>
<form method="POST" action="https://timemachinewatch.com/cgi-bin/formmail.cgi"><input name="recipient" value="[email protected],[email protected]" type="hidden"><input name="subject" value="Time Machine Order Form" type="hidden"><input name="redirect" value="https://timemachinewatch.com/thanksb.html" type="hidden"><input name="required" value="email,realname,streetaddress,city,stocknumber,amount" type="hidden"><input name="sort" value="order:realname,email,phonenumber,streetaddress,city,state,zip,country,stocknumber,amount,shiptype,message" type="hidden"><input name="print_config" value="subject,realname,email,phonenumber,streetaddress,city,state,zip,country,stocknumber,message" type="hidden">
</form></b></center></nowiki></pre>

Similar Messages

  • HT4623 wi-fi is gray will not connect since ios7.03 worked fine before this version...now slow, no wi-fi no solution from apple store but to purchase a new Iphone....other 4s phone purchased at same time connects via wi=fi what gives

    wi-fi is gray will not connect since ios7.03, worked fine before this version...now slow, very slow, using nothing but 4g, no wi-fi no solution from apple store but to purchase a new Iphone....other 4s phone purchased at same time connects via wi-fi what gives?
    Also reloaded per Apple instructions via web, Apple stores only solution "purchase a new phone", no attempt to fix problem.

    https://discussions.apple.com/thread/5554599?tstart=0

  • IPad mini will not sync with iTunes , error-54. Help me

    Help me, Ipad will not sync with itunes .  Keeps saying error iTunes cannot sync ipad Error (-54)

    Hi SBonner,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    - Judy

  • My apple bluetooth keyboard is paired with laptop but will not connect.  mouse is working fine.

    apple bluetooth keyboard is paired but not connecting to laptop.  mouse works fine.

    i am finding it depends greatly on the batteries you put in
    I work for a company that produces batteries...ours work, other brands sometimes do not. if they are manufactured just a hair out of spec, they wont connect consistently...
    they must wobble cuasing flucuations
    same with the mouse...if you use a bit of blue tack, it holds the batteries in, problems solved
    the keyboard is a little different and I cant figure out a macguiver fix

  • .flv in .swf will not play in Firefox but works fine with IE.

    My .swf file plays fine in IE but will not play the .flv portion in Firefox.

    You forgot the /images path in the embed (you swapped name and src)
    src="mainflash1.swf" -&gt; src="/images/mainflash1.swf"
    name="/images/mainflash1" -> name="mainflash1"
    <pre><code>&lt;embed
    type="application/x-shockwave-flash"
    pluginspage="http://www.adobe.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash"
    name="mainflash1"
    width="518" height="274"
    src="/images/mainflash1.swf"
    bgcolor="#FFFFFF"
    quality="high"
    allowscriptaccess="samedomain"
    &gt; &lt;/embed&gt;</code></pre>

  • 5.0 will not open, but 3.5 works fine

    i'd recently tried updating my browser to the FF with Twitter variant offered on twitter's site. but after installation the browser wouldn't open at all. it would show up on the task manager, but that was the extent of the browser's functionality. i've tried uninstalling and reinstalling 5.0 to only have the same luck.
    somehow installing 3.5 seems to have the browser working fine. but when upgrading to 3.6. .the same thing happens.
    i've tried disabling add ons and eventually uninstalling them to no avail. anything above 3.5 just will not work on this laptop.
    if there's anything you can do to help me out. ..i'd greatly appreciate it.

    Thanks for the feedback. I was able to open some PDF files on Acrobat 5 that I recently scanned at a Fed Ex office with no issue whatsoever. I could extract pages, delete pages, etc, the software Acrobat 5 worked fine.
    What I wonder is there a way I can make a change to a PDF file that will then allow me to open it in Acrobat 5? I have a gut feeling there is an adjustment that I can make in Adobe Reader after opening it that will then make the file accessible in Acrobat 5. I am playing with it but no luck thus far.

  • My iPhone will not pair with any devices on bluetooth, help?

    I can't seem to pair my iPhone 4 with any other phones or devices.

    PAISLEYSAINT
    I have a THB Bury car phone cradle specific to the iPhone 4 which was working fine until I updated to iOS 5.1.1 - my phone will no longer pair with it or recognise it or any other Bluetooth device !
    I carried out a full reset and relaunched the phone as if it were new - no success
    I took the phone to the appple store and one of the Geniuses looked at it for me. He told me it was not designed to 'discover' other BT devices after he paired it with his MacBook but could not pair the devices in the opposite direction - i.e my phone to the MacBook. I thought this strange that the premier smart phone on the market should not have this function especially when it previously worked well.
    He also carried out a full reset which is deeper than the one you can do at home - no success.
    The genius would not accept that this was a fault and claimed not to be aware of any issues but offered to have it repaired for around £116 !!!
    Incidentally my phone is just outside its  warranty and his phone would not pair up either when I asked him to check.
    THis is useless to me !! I understand Apple don't want to support BT function that allows it customers to send files between devices but come on ! My £90 BT car cradle kit is now useless and cannot be paired via my iPhone.
    I now really have to consider using a smart phone that will work.
    I love apple stuff and currently own no less than four different devices and was considering a new mac but not now. I feel let down by apple.
    DIssapointed !:-(
    iPhone 4, iOS 5.1.1
    I have this question too (0)
    Reply
    Categories: Wi-Fi, 3G and Bluetooth Tags: none (add)

  • Latest 64-bit Nightly will not install. Minefield was working fine!

    I was regularly using Minefield on my 64-bit Windows 7 system. The updates installed fine. About the second update following the switch from Minefield to Nightly (roughly 04/25), the upgrade install completes but the program will not run. I just get a "Windows" window saying it won't run. I attempted to un-install, clean registry, reinstall, etc. Nothing works. I tried compatibility settings to no avail. Any suggestions. Windows (of course) hasn't found a solution.

    There is a known problem with the latest 64 bit versions of the nightly builds. The 32 bit versions are working. One of the best places to keep track of issues with the nightly builds is the MozillaZine builds forum - http://forums.mozillazine.org/viewforum.php?f=23

  • Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open all other programs work fine

    Adobe bridge cc is not working on my mac snow leopard version 10.6.8. In other words the program will not open, but all other programs i have been able to open just fine

    Moving this discussion to the Bridge General Discussion forum.

  • After I connect an ipod thro a usb cable, firefox will not load, but other browsers work fine.?

    Firefox works fine and is my preferred browser, but after I connect an ipod to my computer it will not load. Even after the ipod has been removed firefox will still not load until the pc is restarted.

    Open the Windows Task Manager > Processes Tab and see if there is a '''firefox.exe''' process running, when you can't open Firefox and you find it necessary ti restart your PC. When you try to open Firefox and a firefox.exe process is "hung", you should get a warning message that ''' "Firefox is already running" '''.

  • HT3964 macbook pro will not start on battery power works fine when plugged in

    My macbook pro 15 inch early 2008 model will not start on battery power but works fine when plugged in.

    check the battery info.. >about this mac>more info>system report and select "power" on the lefthand column.  How many cycles? What does it say about the condition? etc.

  • 500 GB Hard Disk will not mount on iMacs (after working fine for months)

    setup : 2x iMac 24" 10.5.6..wired to airport Xtreme, Iomega 500 GB HD connected via USB
    this drive worked fine and has all the pics on it and was used to backup both iMac's via Time Machine.
    Today the Airport Xtreme (AX) gives us a flashing orange light and informs us that the 500 GB Iomega disk needs to be connected to the mac and needs to be repaired.
    so...we did, with a "disk appears to be OK " message after 'repair'
    mounting from within Disk Utility gives us : "The disk “500HD” could not be mounted.
    Try running First Aid on the disk and then retry mounting."
    (we did just that...!)
    We also tried "Drive Genius" with the same results.
    whether we hook the drive to the AX or directly to the iMac...no mounting.
    The drive (and it's partition) does appear perfectly in both 'Disk Utility' and in 'Drive Genius'
    (The iMac does mount other USB items like mem-sticks, camera's just fine.)

    While it doesn't sound like this is really the problem since OTHER devices work on the USB ports, never the less, it is an easy thing to try out anyway.
    First thing to do is reset the USB chip set on the mother board. Unfortunately, when you power down the computer there is always a bit of power still applied to the motherboard to keep things alive and this usually includes powering the ports to do stuff like detect when a device is plugged in or wants to wake up the computer. The downside of this is when a bus/port chipset goes into a weird state, locks up, etc., simply power cycling (shutdown & restart) the computer won't work.
    So first thing to try is resetting the chipset and to do this you have to power down the computer and completely unplug the computer from the wall power (unplug the power cord to your Mac). Also unplug everything from the Mac's ports (USB, FW, Ethernet, etc.) to make sure no parasitic power is still there to keep the chipset alive. Now let it sit for a minute (give those big power caps in there time to discharge). Now reattach the keyboard & mouse only, plug the power cord back in, & start up the Mac. Now see if your USB ports work any better.
    Best of luck!
    Patrick
    What to do if your computer won't recognize a FireWire or USB device
    http://support.apple.com/kb/HT1317?viewlocale=en_US

  • I have an ipod touch 2nd generation and i have a white screen and will not turn off( it was working fine this am) help!!

    I have a ipod touch 2nd generation and i have a white screen and will not turn off. My ipod was working fine this am, i was checking my facebook acount when it just went white.

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • My Mac book air will not turn on, it was working fine then just turned off

    I cannot get my MacBook Air to turn on

    Portables that will not Power on.
    Try another power outlet.
    http://support.apple.com/kb/TS1365
    Go step by step.
    Note: Steps 5 and 6
    Reset SMC, hold the keys down for 20 seconds or more.
    Best.

  • Mouse will not scroll with FireFox but works with Explorer

    The only time my BlueTooth mouse has problems scrolling is with FireFox.

    You forgot the /images path in the embed (you swapped name and src)
    src="mainflash1.swf" -&gt; src="/images/mainflash1.swf"
    name="/images/mainflash1" -> name="mainflash1"
    <pre><code>&lt;embed
    type="application/x-shockwave-flash"
    pluginspage="http://www.adobe.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash"
    name="mainflash1"
    width="518" height="274"
    src="/images/mainflash1.swf"
    bgcolor="#FFFFFF"
    quality="high"
    allowscriptaccess="samedomain"
    &gt; &lt;/embed&gt;</code></pre>

Maybe you are looking for