Forms 10g - mouse focus/navigation problem

Hello.
We use:
- IE 6
- Java Plug-in 1.5.0_04
- iAS 10.1.2.0.2 (patch 5023945) on HP-UX 11i
We are experiencing an annoying problem. Our ORACLE Forms 10g application (migrated a few months ago from forms 4.5) sometimes loses navigation: mouse clicks stop changing cursor item focus or executing buttons ... Many users can't avoid pressing CTL+ALT+DEL to stop it...
It seams to happen more frequently when users have different windows from different applications opened, navigate to them and then return focus to our application...
We made a workaround that minimized some specific situations:
- avoided enabled image items
- reviewed navigation code to blocks whose first item wasn't navigable (we switched some GO_BLOCK to GO_ITEM)
Should we go to Patch ID 6311490 (focus fix) for 10.1.2.2 iDS and iAS? Is there any other one more suitable?
Which patch should we consider for this situation?
Thanks in advance.
Luis Amorim

Hi Luis
I've seen this sort of thing before and it wasn't easy to solve. There are things you can do to make it better. Check out Oracle Bug 6737974 on metalink. The main cause seemed to be when-deactive-window trigger.
HTH & Good luck
Steve

Similar Messages

Forms 10g Alert button navigation/focus

Hi,
I have an alert that pops up on a certain condition that has 3 buttons to choose from. Navigating between buttons using the left and right arrow keys on works between the first 2 buttons only. Focus does not navigate to the 3rd button.
This did not happen on Forms 6i. Is this normal behavior? Is this a bug in forms 10g? Is there a work around this? Any help will be appreciated.
Thanks

Hi,
Im reactivating this thread because I just discovered this problem.
You are rigth when you say that keyboard navigation works in lookAndFeel=Generic but not lookAndFeel=Oracle.
But this not the only problem encountered.
There is also the default button set in the alert that doesn't work and either in lookAndFeel=Generic and lookAndFeel=Oracle.!
The focus is always on button one, and that is for me a big problem because it usualy the one we use for 'OK' and others for 'CANCEL'.
I let you imagine what problems we can have if the user press return and send ok to the application .......
Is there any patch that correct this behaviour (we are in 9.0.4 patchset 1 at the moment) ?
Thanks
Jean-Yves

Forms 10g R2 - screen resolution problem

Dear all,
is there anyway to accomodate form width to screen size (see picture on [this |http://img196.imageshack.us/img196/7938/oracle10g.jpg] link). Resolution on my machine is: 1280*800.
Thx in advance...

hi,
does your problem solved? if not here is reason:
two example java functions :
public boolean copyFiles(String pSource, String pDestination) {
return true;
public static Boolean deneme() {
return Boolean.valueOf(true);
and their imported counterparts :
-- Method: copyFiles (Ljava/lang/String;Ljava/lang/String;)Z
FUNCTION copyFiles(
obj ORA_JAVA.JOBJECT,
a0 VARCHAR2,
a1 VARCHAR2) RETURN BOOLEAN IS
BEGIN
args := JNI.CREATE_ARG_LIST(2);
JNI.ADD_STRING_ARG(args, a0);
JNI.ADD_STRING_ARG(args, a1);
RETURN JNI.CALL_BOOLEAN_METHOD(FALSE, obj, '......../File', 'copyFiles', '(Ljava/lang/String;Ljava/lang/String;)Z', args);
END;
-- Method: deneme ()Ljava/lang/Boolean;
FUNCTION deneme RETURN ORA_JAVA.JOBJECT IS
BEGIN
args := NULL;
RETURN JNI.CALL_OBJECT_METHOD(TRUE, NULL, '......../File', 'deneme', '()Ljava/lang/Boolean;', args);
END;
as you can recognize function deneme returns "Boolean" so its pl/sql version returns ora_java.jobject.
function copyfiles returns "boolean" so its pl/sql version returns boolean.
regards. Engin.

Mouse focus disapears forms 10g

I am just wondeering if any have had this problem...
open applet, log in, navigate a bit and then java applet window fails and mouse is unusable afterwards can only navigate with the keyboeard...

This sounds like an issue with the installed JVM but it could be a simple configuration issue. Please provide answers to the following questions and we'll see if we can help you solve this problem.
What JVM and version are you using? What Forms version at you using (Forms 10g R1 = version 9.0.4, Forms 10g R2 = 10.0.1)?
What is your OS and version?
What Browser and version are you using?
Craig...
Edited by: CraigB on Jan 6, 2010 12:29 PM

Mouse navigations problem with Sun Java 1.5.0_*

Hello gurus,
We need to move from JInitiator to Sun Java Plugin; according to the Forms10g Client Platform Support (http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html) one of the certified version for Forms 10.1.2.0.2 of the the Sun Java Plugin is 1.5.0_06 and Internet Explorer 6.0, we have tested also SJPI 1.5.0_09 and we get the same mouse navigation problem reported in the following Oracle Forum threads.
Mouse navigation don't work with Java Plugin.
Mouse navigation don't work with Java Plugin.
Forms 10gR2, Sun Java 1.5.0_06 gives mouse problems
Forms 10gR2, Sun Java 1.5.0_06 gives mouse problems
Does anybody know a solution to this problem?
Any help will be really appreciated.
Regards,
Victor.

You need to use 1.5.0_12 or newer. The client SOD is not up-to-date on this specific point. A lot of navigation problems was fixed in this very release.
The Management team should change this in the client SOD, wonder why they still refer to 1.5.0_06. For Applications, the first 1.5.0 to be certified was _12.
Also make sure, that you are using the latest Patch 3 for 10.1.2 (10.1.2.3). This patch also contains fixes for a lot of these wellknown issues.
Hope this helps,
Jacob

When-mouse-enter forms 10g

Hi, everybody.
I have a problem with forms 10g (web) in any sub-version. The problem is that the events when-mouse (enter, leave, ...) does not seem to get fired.
Is there anything I can do to solve the problem (a parameter to be set, anything to do in the form).
Any help will be appreciated,
Thank you.

-> Why it is still documented? Will we get back a client server forms?
I wish! But I am sure it is hopeless. They probably need to leave the when-mouse-enter documentation for backward compatibility -- old forms compiled and running in the Web Forms environment. The traffic would be horrendous. I have WME and WML triggers running, and on some forms, rolling the mouse across the canvas causes a lot of flickering -- item prompts flicker. And then there is the mouse-x,y-pos and when-mouse-move. Those are supported in 6i Client/Server, too. I used it to create a drag and drop functionality. Man, does THAT cause some massive trigger firing!!! Trust me, it would NOT work in a web environment.
And yes, "Hai" is apparently something like an abbreviation for Hello -- a little more formal and polite than Hi. Its use still puzzles me, but apparently that is the reasoning of those who use it. ?:|

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

Problem with output from report to excel, calling the report from form 10g

Hi everyone, I'm having a problem generating a excel from a report, which is called from a form, I'm using Forms 10g. The problem is this: My report has a variable number of columns. These columns appear according to data obtained from the database, these columns are dates, In vesion 6 excel file generated shows the columns one after another starting in column A1 to column CP. I mean that the dates are correlative. But in version 10g the excel file generated shows the same report starting in column A to column T, only shows the 20 dates correlative corresponding to this columns, the rest of the dates are down the excel sheet in groups of 20 dates, it's something, the file in 6i grows across and in 10g grows down the excel sheet. The report (rdf file) is the same in 6i and 10g, I compiled the 6i version to obtain the 10g version. The excel sheet generated in 10g looks like the report was in pdf format, because PDF format, cuts the report in pages and the file grows down, if I generate the report in PDF format it has the same structure excel file in 10g has. I hope yo can help because I have days trying to solve this but I have no succes. If someone could help I could email the excel files generated in two versions. Here I put the code I use to generate the files in 6i and 10g. I have tried with DESFORMAT=SPREADSHEET in 10g but the result is the same. Thanks for your help. Greetings for all.
Code for version 6i (Works Very well)
PROCEDURE GUARDAREXCEL IS
pl_id ParamList;
nom_rep varchar2(20);
cla_rep varchar2(20);
cod_dis varchar2(4);
nom_arch varchar2(100);
fec date;
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
cod_dis := :BK_PARAMETROS.LI_COD_DIS;
END IF;
IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
ELSE
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
:BK_PARAMETROS.TI_COD_CLI:='%';
END IF;
IF :BK_PARAMETROS.CLAS_REP=1 THEN
cla_rep := '001';
ELSE
     IF :BK_PARAMETROS.CLAS_REP=2 THEN
          cla_rep := '002';
     ELSE
          IF :BK_PARAMETROS.CLAS_REP=3 THEN
          cla_rep := '003';
     ELSE
          cla_rep := '004';
     END IF;
     END IF;
END IF;
Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );
select sysdate into fec from dual;
IF :BK_PARAMETROS.TIPO_REP=1 THEN
     BEGIN
nom_rep := 'tdvenrli1577.rep';
nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
END;
ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
          BEGIN
          nom_rep := 'tdvenrli1578.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
     BEGIN
                    Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');
          nom_rep := 'tdvenrli1576.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
ELSE
          BEGIN
                    nom_rep := 'TDVENRLI1545.REP';
          nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
END IF;
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
standard.commit;
Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
EXCEPTION WHEN Run_Product_Failure THEN
message('Error');
END;
Code for version 10g
PROCEDURE GUARDAREXCEL IS
pl_id ParamList;
nom_rep varchar2(20);
cla_rep varchar2(20);
cod_dis varchar2(4);
nom_arch varchar2(100);
fec date;
--byt12122007.sn
repid REPORT_OBJECT;
     vURL VARCHAR2(500);
     rep_status VARCHAR2(20);
     vJobID VARCHAR2(100);
     v_rep VARCHAR2(100);
VAR NUMBER;
w_name_repserv VARCHAR2(30);
--byt1212007.en
BEGIN
     --w_name_repserv:=F_OBTIENE_SERVREP;
w_name_repserv:='repserv';
pl_id := Get_Parameter_List('mytmp_params');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('mytmp_params');
IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
     cod_dis := :BK_PARAMETROS.LI_COD_DIS;
END IF;
IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
ELSE
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
:BK_PARAMETROS.TI_COD_CLI:='%';
END IF;
IF :BK_PARAMETROS.CLAS_REP=1 THEN
cla_rep := '001';
ELSE
     IF :BK_PARAMETROS.CLAS_REP=2 THEN
          cla_rep := '002';
     ELSE
          IF :BK_PARAMETROS.CLAS_REP=3 THEN
          cla_rep := '003';
     ELSE
          cla_rep := '004';
     END IF;
     END IF;
END IF;
Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
/*Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );*/
select sysdate into fec from dual;
IF :BK_PARAMETROS.TIPO_REP=1 THEN
BEGIN
     repid := find_report_object('tdvenrli1577');
--nom_rep := 'tdvenrli1577.rep';
nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1577');
END;
ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
BEGIN
     repid := find_report_object('tdvenrli1578');
          --nom_rep := 'tdvenrli1578.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1578');
          END;
ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
BEGIN
     repid := find_report_object('tdvenrli1576');
                    Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');
          --nom_rep := 'tdvenrli1576.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1576');
          END;
ELSE
BEGIN
     repid := find_report_object('tdvenrli1545');
                    --nom_rep := 'TDVENRLI1545.REP';
          nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1545');
          END;
END IF;
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
standard.commit;
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESNAME,nom_arch);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, 'File');
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'DELIMITED');
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, w_name_repserv);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_OTHER, 'paramform=no');
     v_rep := RUN_REPORT_OBJECT(repid, pl_id);
     rep_status := REPORT_OBJECT_STATUS(v_rep);
     WHILE rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED')     LOOP
          rep_status:= report_object_status(v_rep);
     END LOOP;
     IF rep_status = 'FINISHED' THEN
          vJobID := SUBSTR(v_rep, INSTR(v_rep, '_', -1)+1);
          vURL:='/reports/rwservlet/getjobid'||vJobID||'?'||'server='||w_name_repserv;
     END IF;
     WEB.SHOW_DOCUMENT(vURL, '_blank');
     IF NOT form_success THEN
          MESSAGE('Error: PL/SQL held against Button failed to execute');
          RAISE FORM_TRIGGER_FAILURE;
     END IF;
/*Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
EXCEPTION WHEN Run_Product_Failure THEN
message('Error');*/
END;

There are two problems with your VI. First, the basic logic of writing/appending to a file (Excel, TDMS, anything) should go something like this: Open the file, position yourself at the end of the file, then, in the loop, acquire data and write it to the file until you are finished with data acquisition. When you exit the acquire/write to file loop, then close the file. In particular, the opening and the closing of the file should not be inside the loop.
As others have pointed out, writing to Excel might not be optimal, particularly if you are acquiring data at a high rate (and would therefore be writing a lot of data). We actually use Excel in our data acquisition routine, mainly reading from a WorkSheet to get the parameters of a particular stimulus, but also writing the outcome of the response to the stimulus. As it happens, our "acquisition rate" in this example is on the order of several samples per minute, so there's no problem using Excel (we also sample 16 channels of analog data at 1 KHz -- this gets written as a binary file).
Second, if you really do want to use Excel, use the (existing) Excel file to which you want to append as the "template" argument of the New Report function. Then use the Excel Get Last Row function to position yourself at "end of file", as noted above.
Good Luck.
Bob Schor

Compilation problem in Forms 10g

Currently we are upgrading from 6i to 10g forms
we have 2 forms which we will complie partially in 10g and the form gets closed as a corrupted file.
The same form when complied in 6i works fine.
What can be the possible problem.
Please help
Thanks
Yaaminy
480-262-7881

hi
create a batch file of the following commands and compile them i hope it helps u.
@ECHO OFF
cls
Echo compiling libraries 10g ....
for %%f IN (*.pll) do frmcmp userid=User_name/pass@orcl module=%%f batch=yes module_type=library compile_all=yes window_state=minimize
ECHO libraries compilation complete
ECHO ----------------------------------
Echo compiling menus 10g ....
for %%f IN (*.mmb) do frmcmp userid=User_name/pass@orcl module=%%f batch=yes module_type=menu compile_all=yes window_state=minimize
ECHO menus compilation complete
ECHO ----------------------------------
Echo compiling forms 10g ....
for %%f IN (*.fmb) do frmcmp userid=User_name/pass@orcl module=%%f batch=yes module_type=form compile_all=yes window_state=minimize
ECHO form compilation complete
ECHO ----------------------------------
ECHO Form Compilation completesarah

Problem with PJC (Print Dialog) - Forms 10g

I have a problem with my PJC for Forms 10g r2. When I try to connect and run my PJC (raise Print dialog and put printer name in some text item) I get following message:
oracle.forms.net.ConnectionException: Forms session <2> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
When I started application, on Java console I saw this message, so I think the server configuration is fine (I change everything I need in Default.env and FormsWeb.cfg files):
Loading http://devsrv/forms/java/jESPrintDialog.jar from JAR cache
What can I change with server configuration or deploying my project to this PJC can work normaly?
Thanks....

Hi and thanks!
I resolve one part of my problem. Tt was about diferent compiler (in JDeveloper 10.1.3 compiler is 1.5 and in my oc4j server JRE is earlier version, so it can`t work normaly).
I comiled PJC in 1.4 version of compiler and now I can start and run my PJC.
But, there is another problem:
this is my part of java code (note: everything work fine except one line when I want to get printer name from select printer dialog):
try {
boolean b;
PrinterJob job = PrinterJob.getPrinterJob();
b = job.printDialog();
try {
return job.getPrintService().getName();
catch (Exception e) {
System.out.println("Error: "+e.getMessage());
return "My error:";
} catch (Exception e) {
System.out.println("ERROR: " + e.getMessage());
return "Problem with PJC [esoft]";
So, when pjc want to get back printer name
return job.getPrintService().getName();
i get following error (on Java console):
java.lang.NoSuchMethodError
     at happypjc.PDialog.getProperty(PDialog.java:50)
     at oracle.forms.handler.UICommon.onGet(Unknown Source)
     at oracle.forms.engine.Runform.onGetHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Can you give me some hint about it. Everything is OK now, except this (very important) peace of code!
best regards
mret

Problem in running oracle report from form 10g Version 10.1.2.0.2

Hi All,
I am facing problem while running the report from forms 10g getting FRM-41219
For this i am using the following procedure :
PROCEDURE RUN_REPORT IS
L_RUN_TEXT VARCHAR2 (2000);
L_USRID VARCHAR2 (100);
L_PASSWD VARCHAR2 (100);
L_DESNAME VARCHAR2 (100);
FILE_OUT_PUT VARCHAR2(200);
REP_STATUS VARCHAR2(20);
REP_NAME VARCHAR2(50);
PL_ID PARAMLIST;
REP_URL VARCHAR2(2000);
V_REP VARCHAR2(200);
BEGIN
display_me('RUN_REPORT');
-- CALL THE FOLLOWING FUNCTION, IN WHICH USER CAN WRITE HIS OWN CODE.
-- THE PROCEDURE CAN BE MADE LOCAL TO THE SPECIFIC FORM AND WRITE THE CODE.
-- IT SHOULD RETURN 'Y', IF YOU WANT TO PROCEED WITH THIS RUN_REPORT
-- PROCEDURE.
IF NVL (RUN_REPORT1, 'Y') = 'N' THEN
RETURN;
END IF;
COMMIT_FORM;
IF (GET_APPLICATION_PROPERTY (OPERATING_SYSTEM)) = 'UNIX' THEN
L_DESNAME := 'LP';
ELSE
L_DESNAME := NAME_IN ('REPORT_TITLE.F_FILE_NAME');
display_me(L_DESNAME);
END IF ;
/* SETTING THE REPORT OBJECT PROPERTIES */
/* G_PRAM1 IS THE NAME OF REPORT ****/
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_SERVER,'172.18.76.34');
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_FILENAME,:GLOBAL.G_PARAM1||'.REP');
display_me(':GLOBAL.G_PARAM1 '||:GLOBAL.G_PARAM1);
PL_ID := GET_PARAMETER_LIST ('REP_PARA');
IF NOT ID_NULL (PL_ID) THEN
DESTROY_PARAMETER_LIST ('REP_PARA');
END IF;
PL_ID := CREATE_PARAMETER_LIST('REP_PARA');
ADD_PARAMETER (PL_ID, 'DESTYPE' , TEXT_PARAMETER, NAME_IN ('REPORT_TITLE.RAG_DESTINATION') );
ADD_PARAMETER (PL_ID, 'DESNAME' , TEXT_PARAMETER, L_DESNAME);
ADD_PARAMETER (PL_ID, 'COPIES' , TEXT_PARAMETER, NAME_IN ('REPORT_TITLE.F_NO_COPY') );
ADD_PARAMETER (PL_ID, 'ORIENTATION', TEXT_PARAMETER, 'LANDSCAPE');
ADD_PARAMETER (PL_ID, 'MODE' , TEXT_PARAMETER, 'BITMAP');
ADD_PARAMETER (PL_ID, 'PARAMFORM' , TEXT_PARAMETER, 'NO');
ADD_PARAMETER (PL_ID, 'PARAM' , TEXT_PARAMETER, NAME_IN ('IBP_REPORT_PARAMETER.F_REP_SEQ') );
ADD_PARAMETER (PL_ID, 'P_COMP_CODE' ,TEXT_PARAMETER,:GLOBAL.G_COMP_CODE);
display_me(':GLOBAL.G_COMP_CODE '||:GLOBAL.G_COMP_CODE);
REP_NAME := :GLOBAL.G_PARAM1||'.REP';
display_me('REP_NAME'||REP_NAME);
V_REP := RUN_REPORT_OBJECT('REPOBJ');
display_me('V_REP '||V_REP);
REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
display_me('REP_STATUS'||REP_STATUS);
WHILE REP_STATUS IN ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
END LOOP;
IF REP_STATUS = 'FINISHED' THEN
REP_URL:='/REPORTS/RWSERVLET/GETJOBID'||SUBSTR(V_REP,INSTR(V_REP,'_',-1)+1)||'?'||'SERVER=172.18.76.34';
display_me('REP_URL '||REP_URL);
WEB.SHOW_DOCUMENT(REP_URL,'_BLANK');
ELSE
MESSAGE('ERROR WHEN RUNNING REPORT');
END IF;
END;
Which is called on a button , can any body share there idea to help out
Warm Regards
Ashutosh

Yes, I have replace the userid with scott/tiger@orcl with i6menu/i6menu@vbs and also replace the OAS server's name as you have suggested.
declare
REP_URL varchar2(2000);
begin
REP_URL:= '/reports/rwservlet?userid=i6menu/i6menu@vbs&report=testrep_10g.rdf&desformat=pdf&destype=cache&paramform=no';
WEB.SHOW_DOCUMENT(REP_URL,'_BLANK');
end;
I had the 2nd code also but both r not working on my machine ......... !!
I have made the following setting on my machine:
1. Registry -> HKEY_LOCAL_MACHINE -> SOFTWARE-> ORACLE-> KEY_DevSuiteHome1->FORMS_PATH ->
Values is : D:\vision_soft\VSS\exe
2. Registry -> HKEY_LOCAL_MACHINE -> SOFTWARE-> ORACLE-> KEY_DevSuiteHome1->REPORTS_PATH ->
Values is : D:\vision_soft\VSS\exe
3. Entry made in the DevSuiteHome_1\forms\server ->default.env
FORMS_PATH=D:\vision_soft\VSS\exe
4. Entry made in the DevSuiteHome_1\reports\confr ->rwservlet.properties
#SERVER= rep10
As my forms is working well & but the report are not able to call.
Could you please let me know is there is any other mandatory setting required for the report 10g.
Regards,
Ashutosh

Problem executing form 10G

Hi Buddies;
I'm trying to execute FORM 10G, but when I choose Run Form, I get this error message;
Internet Explorer has closed this webpage to help protect your computer
A malfunctioning or malicious add-on has caused Internet Explorer to close this webpage.
Previously I could execute the form, but after some problems in my laptop and had to reinstall the OS.
Now I got this problem.
Have any idea how to solve this?
Also, I was trying using Firefox, but getting similar error message.
Suggestions are welcome.
Regards
Al

Hi,
You have to replace the JVM.DLL in the directory *<Program Files>\Oracle\JInitiator 1.3.1.22\bin\hotspot* with the latest jvm.dll(2.2Mb) from here.
And if you are using Explorer 8, then do the following.
1. Open Internet Explorer 8
2. Go to Tools, Internet Options
3. Click on the Advanced tab.
4. Scroll down into the Security section and find “Enable memory protection to help mitigate online attacks”.
5. Uncheck “Enable memory protection to help mitigate online attacks”.
6. Click Ok and Ok again.
7. Reboot your computer.Regards,
Manu.
If my response or the response of another was helpful or Correct, please mark it accordingly

Oracle Forms 10g & Oracle 10g DB Connection Problem

Toady i have installed oracle forms 10g and oracle 10g db when i run my form it gives me this error how can i resolve it
"ora-12154 tns could not resolve the connect identifier specified"
Here are the values in forms 10g tns
# tnsnames.ora Network Configuration File: C:\DevSuiteHome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
          IMS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = IMS)
and here the values of forms 10g SQLnet
# sqlnet.ora Network Configuration File: C:\DevSuiteHome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT, ONAMES, HOSTNAME)
(description =
# (address=(protocol=tcp)(host=localhost)(port=1383))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(connect_data=(rpc=on))
What changes should i make to overcome this problem.

"ora-12154 tns could not resolve the connect identifier specified"The problem is local to the Forms Home, probably in tnsnames.ora (seems that there are tabs in IMS entry name). Carefully check it.$ oerr ora 12154
12154, 00000, "TNS:could not resolve the connect identifier specified"
// *Cause: A connection to a database or other service was requested using
// a connect identifier, and the connect identifier specified could not
// be resolved into a connect descriptor using one of the naming methods
// configured. For example, if the type of connect identifier used was a
// net service name then the net service name could not be found in a
// naming method repository, or the repository could not be
// located or reached.
// *Action:
//   - If you are using local naming (TNSNAMES.ORA file):
//      - Make sure that "TNSNAMES" is listed as one of the values of the
//        NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA)
//      - Verify that a TNSNAMES.ORA file exists and is in the proper
//        directory and is accessible.
//      - Check that the net service name used as the connect identifier
//        exists in the TNSNAMES.ORA file.
//      - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
//        file. Look for unmatched parentheses or stray characters. Errors
//        in a TNSNAMES.ORA file may make it unusable.
//   - If you are using directory naming:
//      - Verify that "LDAP" is listed as one of the values of the
//        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA).
//      - Verify that the LDAP directory server is up and that it is
//        accessible.
//      - Verify that the net service name or database name used as the
//        connect identifier is configured in the directory.
//      - Verify that the default context being used is correct by
//        specifying a fully qualified net service name or a full LDAP DN
//        as the connect identifier
//   - If you are using easy connect naming:
//      - Verify that "EZCONNECT" is listed as one of the values of the
//        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA).
//      - Make sure the host, port and service name specified
//        are correct.
//      - Try enclosing the connect identifier in quote marks.
//   See the Oracle Net Services Administrators Guide or the Oracle
//   operating system specific guide for more information on naming.
$

Unicode problem in Forms 10g

Dear Everybody,
Re : Oracle 10g DB for linux
Oracle Forms 10g for Windows/Linux
Oracle IAS 10g for linux
Oracle Jinitiator 1.3.1.18 for windows
i need to put two chinese words on two column label in Forms. one is traditional chinese UTF8 and other one is
simp. chinese UTF8. it develop by Forms on windows and re-compile it on linux then deploy it on IAS on linux.
it is fine when i access from IE. i can see two difference chinese words in forms. but when i try to resize the fonts and make the fonts to bold.
it still same as before.
Why the fonts size no effect ?
i think the problem is cause by Jinitiator.
is it correct ?
The two chinese words as below : -
T.C : ç¹é«ä¸æUTF-å«é«
S.C : ç®ä½ä¸æUTF-å«ä½
Best Regards
Boris

The date item property was defined as:
data type: datetime
maxium length:17
initial value: $$DATETIME$$
format mask: DD-MON-YYYY HH24:MI
changed to ->
data type: datetime
maxium length:30
initial value: $$DATETIME$$
format mask: DD-MON-YYYY HH24:MI:SS
It still does the timestamp switching for the record 1 and 2. If the record 1 and 2 are inserted more than a minute apart, then it works. Anything to do with database datetime setup?

Connectivity Problems Forms 10g Builder with 11g Database Release 1

Hello All,
I am trying to connect 11g Database (Version 11.1.0.7.0 mounted on Linux) from my Oracle Forms 10g Builder 10.1.2.0.2 in my client PC Windodws XP. But its just hanging and doesnt connects at all.
Strange is that from the same Oracle home i am able to connect to same 11g user through the reports builder 10g and
, sqlplusw and sqlplus from 10g home.
But i am not able to connect to 11g R1 database from my Forms Builder alone. Why is this? Can the PROs get me out of this problem please.
Thanks in advance.

Hi
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Development Tools which you can get more quick response
Regard
Helios

Forms 10g - mouse focus/navigation problem

Similar Messages

Maybe you are looking for