Forms debug not working in 11g. Working fine in 10g

I am able to attach the debug of runtime with the random port number, but not stopping at the breakpoints. This is happening in 11g environment.
Same method is working in 10g environment. What additional configuration do I need to do to run a form in debug mode in 11g environment.
My configuration is here.
1. in env file, I have the debugger.jar added to Classpath
cusm.env
CLASSPATH=...;....;....;C:\Oracle\Middleware\Oracle_FRHome1\jlib\debugger.jar;...;...;
FORMS=C:\Oracle\Middleware\Oracle_FRHome1\forms
2. formsweb.cfg
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
allow_debug=false
[cusm]
workDirectory=/oracleias11g/work
envfile=cusm.env
form=frm_main.fmx
userid=@orcl
lookAndFeel=oracle
pageTitle=Development 11g
width=1050
height=800
archive=frmall.jar,customicon.jar
At runtime from the form
debug.attach;
Then in the forms designer
Debug-->Attach Debug
Enter the random port number and the server and enter.
Create couple of breakpoints in the forms trigger.
and press button in the form.
Now control is expected to come to forms designer, but not stopping at breakpoints.
When Stop debug from forms designer, the runtime session is ending.
Please help.
Thanks in advance,
Ravi

Assuming you connected to the running form successfully, it sounds like your breakpoint is not being called. In other words, if you put a breakpoint in a trigger that isn't firing then the break will never occur. A simple test would be to add a break in the WHEN-NEW-FORM-INSTANCE trigger. Since this trigger cannot be avoided, control will quickly be passed to the debugger at startup. If this works then you can assume what I mentioned, which is that your other breakpoints are not being reached.
Just to be sure, I just tested the Debugger in Forms 11.1.2.1 on Windows and it appears to work correctly.

Similar Messages

Forms Is not running In 11g

Hi,
Windows 7 32bit.
WebLogic 1.5
Fusion Middle Ware 11.1.1.6
Database 11g.
I have problem when running form throw the web . The WLS_FORMS is running well .
but when i start run form throw the web nothing in browser.
what is the IE version for 11.1.1.6 version ?
Regards,
Edited by: NOADF on 31-May-2012 13:42
Edited by: NOADF on 31-May-2012 13:46

NOADF,
Forms 11R1 : IE8/IE7.
Did you search the forum before posting?
Did you see {message:id=10362662}, {message:id=10316166}, {message:id=10304018},etc.?
Regards,

Database link works for form but not report

I have created a database link to the scott.emp table in a remote database then created a local synonym in my Portal.
I then created a Form and a Report referencing the local synonym. The for works and allows me to insert record but the form does not. The report compiles fine but I get a message that Portal can't find the underlying table. It seems that if the form works then the report should too. Does anyone have a recommended solution?
Thank you.
Sam Masias

There is a bug filed for this issue. And it should be taken up for fixing most probably in next release.

Fillable Form will not print from Adobe Reader on iPad or iPhone - Works on a PC

I created a fillable form in Adobe Acrobat X Pro. I saved it giving it full Adobe Reader capabilities. I emailed it to myself and a friend so that we could open it up on our iPad and iPhone using Adobe Reader, fill in the information and then print the document. When we send to print, it only prints the form, but not anything we entered. When I opened the document in Adobe Reader on my Dell PC, it worked fine and I could print the document including everything that I entered. What could the glitch be with iPad and iPhone. We are running the latest IOS6 version with Adobe Reader installed. Why won't this work?

It should work with the update to Reader 10.4. "Enhaned compatibility with AirPrint means improved printing of completed forms as well as documents with comments."
I don't have AirPrint on my printer to test. Is your printer AirPrint compatible?
I can get it to work with Printer Pro which I'm running on my iPad.

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. t worked, but only for those with PC. I could not get it to work with Apple Yosemite even with reader installed . is there a way i can make it work for apple /

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
Thanks

LiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well...

Webutil - works in the form but not in the forms menu

Hi
Forms: 11.1.1.3
Dbs: 11.2.0.2
I have some code which calls webutil to do an AS to client file transfer.
This works fine when called from a button in the form.
If I have a menu on this form, and perform the same code to call webutil I get an error:
oracle.forms.webutil.fileTransfer.FileTransfer bean not found WEBUTIL_FILE_TRANSFER.getMaxTransfer will not work
So the same code will work when in the body of the form but not when in the menu.
The forms has opened up and instantiated all of its objects at both times I try to run it. But it fails from the menu code call.
Any thoughts on why one works and the other doesn't gratefull received.
cheers
Tony

Hi Tony
We also had the problem.
solution:
We have created a wrapper-form with in the webutil functionality has been implemented (with a dummy-Item).
In the form we have created a When-Timer-Expired trigger and implemented the Filetransfer functionality. Then Exit_Form.
This wrapper-form was then called from the menu.
Alfred

Pdf forms (emails) not working after update

I recently have discovered that muse is not sending email pdf forms from the website. Is this a bug? I could not get it to work from preview or browser. I even uploaded a test and sure enough it doesn't send the form. The form sends fine from acrobat, so I know the mailto: settings are correct.
I checked acrobat settings and tried some work arounds. tested again and no luck.
As a final test, I updated an existing website that the forms currently work correctly. When I updated the site and previewed in browser mode, the forms could not be emailed any more. It's like the mailing URL link doesn't work because nothing was changed on the updated website - it was purely a test to confirm the problem.
Please help!
If anyone else is having this issue, please post here.
Ben
(I had this on a different post not realizing it should have gone here)

definately error 0013 and not 1013?
If 1013, I copied this from another thread, it worked a treat for me yesterday when I kept getting error 1013
More complete solution for those not knowing where to find the file:
On Mac:
* Open Finder
* Hold down COMMAND + SHIFT keys and press 'G'
* Enter "/private/etc/" in the field and press "Go"
* Find "hosts" file in the directory
* Drag the file to your desktop
* Open it in text editor
* Remove the line that has gs.apple.com entirely or put a # at the beginning of it to comment it out
* Save the file
* Drag it back to the /private/etc/ folder.
* You'd need to enter your username and password to authenticate the move
On Windows:
* Locate the hosts file in one of the following directories:
Windows 95/98/Me c:\windows\hosts
Windows NT/2000/XP Pro c:\winnt\system32\drivers\etc\hosts
Windows XP, Vista, 7 c:\windows\system32\drivers\etc\hosts
* Right click and click on "Open With..." and then click on "Notepad" on the list.
* Remove the line that has gs.apple.com completely and save the file.
This should work fine.
Message was edited by: ke11111y

Textbox Data Binding in VS 2008, Works on a Main form but not in a Dialog!

I got a perplexing problem here with Databindings. I'm using a POCO class for XML serialization that implements the INotifyPropertyChanged. I'm using Visual Basic 2008 and unfortunately I have to keep the program that way!
I have two projects: One is a Main WinForm, and the other one I'm working with another engineer and I'm trying to create a dialogbox for the users to enter in data (ie: user name, calibration data, etc)
In my Main Winform, I'm doing databinding like this:
TextBoxUserName.DataBindings.Add("Text", data, "Name", False, DataSourceUpdateMode.OnPropertyChanged)
And it works fine, but when I do this in the dialogbox form, NOTHING is being updated. Not the textbox nor the data.name member (which is also a string)
So what's the problem then? How come it works in the instance of the Main Winform but not in the dialogbox?

Duplicate post with :https://social.msdn.microsoft.com/Forums/en-US/04720835-d2a9-47cb-a0d9-ca457e6bb377/textbox-data-binding-in-vs-2008-works-on-a-main-form-but-not-in-a-dialog?forum=vbgeneral

Maximum length property check works fine in 10g, but after upgrade the check is not performed

Recently we upgraded our oracle forms from 10g to 11gR2.
one of the text item has maximum length property defined as 3 (data type is number and format mask is 009). In 10g, in ENTER-QUERY mode, maximum length property check was happening, and user was not allowed to enter more than 3 digits. once the form is upgraded to 11g, in same mode no check is happening. I am aware that in ENTER-QUERY mode, lot of validation won't happen. But client don't want to know all details. He want it to work as it works in 10g. Any help will be appreciated.
Thanks.

Recently we upgraded our oracle forms from 10g to 11gR2.
one of the text item has maximum length property defined as 3 (data type is number and format mask is 009). In 10g, in ENTER-QUERY mode, maximum length property check was happening, and user was not allowed to enter more than 3 digits. once the form is upgraded to 11g, in same mode no check is happening. I am aware that in ENTER-QUERY mode, lot of validation won't happen. But client don't want to know all details. He want it to work as it works in 10g. Any help will be appreciated.
Thanks.

Webutil Demo form is not working !!!!

Hi,
I Download WebUtil Demo form, compiled it and tried to run the demo form using Forms 11g but at run time the following error alert appears:
oracle.forms.webutil.clientinfo.GetClientInfo bean not found.
WEBUTIL_CLIENTINFO.GET_SYSTEM_PROPERTY will not work
My environment is Oracle Forms 11g on which Webutil is already installed as it is mentioned in Forms 11g FAQ. So I did not change or add anything for webutil.
Any Help !!!!
Regards,
Yousuf.

hi
i am not sure for 11g but u can try this.........
How to get up and running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
Solution
Assuming a fresh "Complete" install of Oracle Developer Suite 10.1.2.0.2,
here are steps to get a small test form running, using WebUtil 1.06.
Note: [OraHome] is used as an alias for your real oDS ORACLE_HOME.
Feel free to copy this note to a text editor, and do a global find/replace on
[OraHome] with your actual value (no trailing slash). Then it is easy to
copy/paste actual commands to be executed from the note copy.
1) Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
2) Copy or move jacob.jar and jacob.dll
[JacobStage] is the folder where you extracted Jacob, and will end in ...\jacob_18
     cd [JacobStage]
     copy jacob.jar [OraHome]\forms\java\.
     copy jacob.dll [OraHome]\forms\webutil\.
The Jacob staging area is no longer needed, and may be deleted.
3) Sign frmwebutil.jar and jacob.jar
Open a DOS command prompt.
Add [OraHome]\jdk\bin to the PATH:
     set PATH=[OraHome]\jdk\bin;%PATH%
Sign the files, and check the output for success:
     [OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\frmwebutil.jar
     [OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\jacob.jar
4) If you already have a schema in your RDBMS which contains the WebUtil stored code,
you may skip this step. Otherwise,
Create a schema to hold the WebUtil stored code, and privileges needed to
connect and create a stored package. Schema name "WEBUTIL" is recommended
for no reason other than consistency over the user base.
Open [OraHome]\forms\create_webutil_db.sql in a text editor, and delete or comment
out the EXIT statement, to be able to see whether the objects were created witout
errors.
Start SQL*Plus as SYSTEM, and issue:
     CREATE USER webutil IDENTIFIED BY [password]
     DEFAULT TABLESPACE users
     TEMPORARY TABLESPACE temp;
     GRANT CONNECT, CREATE PROCEDURE, CREATE PUBLIC SYNONYM TO webutil;
     CONNECT webutil/[password]@[connectstring]
     @[OraHome]\forms\create_webutil_db.sql
     -- Inspect SQL*Plus output for errors, and then
     CREATE PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
Reconnect as SYSTEM, and issue:
     grant execute on webutil_db to public;
5) Modify [OraHome]\forms\server\default.env, and append [OraHome]\jdk\jre\lib\rt.jar
to the CLASSPATH entry.
6) Start the OC4J instance
7) Start Forms Builder and connect to a schema in the RDBMS used in step (4).
Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
It is important to generate the PLX, to avoid the FRM-40039 discussed in
Note 303682.1
If the PLX is not generated, the Webutil.pll library would have to be attached with
full path information to all forms wishing to use WebUtil. This is NOT recommended.
8) Create a new FMB.
Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
There is no need to Subclass the WebutilConfig object.
Attach the Webutil.pll Library, and remove the path.
Add an ON-LOGON trigger with the code
         NULL;
to avoid having to connect to an RDBMS (optional).
Create a new button on a new canvas, with the code
         show_webutil_information (TRUE);
in a WHEN-BUTTON-PRESSED trigger.
Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
9) Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
the "Application Server URL" is empty.
Then append "?config=webutil" at the end, so you end up with a URL of the form
      http://server:port/forms/frmservlet?config=webutil
10) Run your form.sarah

HTML 5 Contact Form "Placeholder" instead of label makes form validation not work

Hi,
I am trying to implement a HTML 5 contact form which uses a "placeholder" within the field instead of a label. But now the form validation does not work.
The site is at http://www.partnerrealestate.ch/avenuedefrance23/index.html and it is not using any workflows from BC as the person receiving it is an external person and the process does not require a workflow.
Would appreciate any input into this.
Kindest Regards,
corina

There is no label on input fields. The form does not work because you have edited the names. BC needs the ID and names to be as it is issue when you create the form so it knows what to use for the validation and what information to pass into the database.
So where you have edited these, you need to restore those.
You have some invalid html on some input's as well one has input="" inside of it when rendered so that is not right.
It is not to do with placeholder use. So fix up your HTML errors, correct the name and ID changes and it will work fine.

HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

OC4J JSP Debugging not working for all the jsps

Hi,
Initially I was not able to debug jsps using Eclipse and OC4J. The jsp debugging started working once I made the below changes:
1) global-web-application.xml is modified
Changed the attribute development="true" in orion-web-app
Added the below init param for the JspServlet
<init-param>
<param-name>debug</param-name>
<param-value>class</param-value>
</init-param>
If the jsps are present in a sub directory under the webcontent none of the breakpoints are working. I am still be able to view the jsp pages on the browser.
Tools: Oracle 10g Application Server Standalone version(10.1.3.5.0), JDK5, Windows XP, Eclipse Indigo
Project Structure:
Test (Eclipse Dynamic Web Project)
-WebContent
Sample.jsp ( Breakpoints are working)
-subF (Folder)
SubSample.jsp (Breakpoints are not working)
-WEB-INF
web.xml
Debugging worked for http://localhost:8888/Test/Sample.jsp
Debugging not working for http://localhost:8888/Test/subF/SubSample.jsp
Any help is highly appreciated.
Regards
Danny

This tells there is not enough main memory (not disk space) for the program to run.
- You can look the dump in ST22, it will have suggestions on increasing the ROLLAREA??, you can forward that to Basis.
- Most likely you will not have any more memory to assign so the above may not be feasible. Try to rework your query so it works with less data.

Dbms_metadata.get_ddl not working in 11g

Hi All,
I need a quick help from you. Following is not working in 11g.
dbms_metadata.get_ddl( 'MATERIALIZED_VIEW', Mview_name, owner )
It is throwing me an error saying the Materialized view does not exist, though its exist.
Please let me know, what is wrong here with 11g.

Please let me know, what is wrong here with 11g.No problem here: Can you reproduce these steps:
SQL> select * from v$version where rownum = 1
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
1 row selected.
SQL> create materialized view mv_dummy as select * from dual
Materialized View created.
SQL> select dbms_metadata.get_ddl ('MATERIALIZED_VIEW', 'MV_DUMMY', user) ddl from dual
DDL
CREATE MATERIALIZED VIEW "MICHAEL"."MV_DUMMY" ("DUMMY")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOG
GING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
BUILD IMMEDIATE
USING INDEX
REFRESH FORCE ON DEMAND
USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED CONSTRAINTS DISABLE QUERY REWRITE
AS select * from dual
1 row selected.?

Problem on PC: During import, I can locate the sources folder however the photo do not display. Was working fine.

Problem on PC: During import, I can locate the sources folder however the photo do not display. Was working fine. All file types, Lightroom is no longer recognising the images to import, The panel that usually displays them remains empty. Try using backup versions, removing software that could conflict , still no joy, has anyone had this problem?

Did you follow this procedure?
Our iTunes guru Terence Devlin advises the following:
1. Quit iTunes
2. Drag the iTunes folder from your internal hd - located in ~/Music folder - to your external hd. DO NOT delete the original one from your internal hd... yet!
3. When the transfer is complete, press and hold the Option(alt) key and fire up iTunes.
4. A "Choose iTunes Library" window will come up. Click on the "Choose Library" button.
5. Navigate to where the iTunes folder is located in the external hd.
6. Within the iTunes folder, select the iTunes Library file and click Choose...
That's it. iTunes will now display all your playlists, songs, movies, podcasts etc. At this point, should you wish, you can delete the iTunes folder from the internal hd to free up space.
More info:
http://support.apple.com/kb/HT1751
Or if you prefer a more complicated explanation:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

Forms debug not working in 11g. Working fine in 10g

Similar Messages

Maybe you are looking for