Forms - redirect and from variable

I have 2 questions on forms:
Question 1
I am having problems with the results of a form which are
being sent into the recipient's spam folder since the senders
address isn't showing up.
I tried adding in <input type="hidden" name="from"
value="[email protected]">
but I am not sure that is the correct way to get the form to
have some recognizable email address or
where this should be placed in the code.
Question2
I also want to have the form go to a customized thank you
page rather than the general one that formmail provides.
I added in <input type=hidden name="redirect" value="
http://www.center4creativity.org/temp/thankyou.htm">,
but again I am not sure where this should goin the code of
the form.
You can see the most recent version of the form at:
http://www.center4creativity.org/temp/contact2.htm
Any help would be really appreciated, I have been trying to
figure this out for a while now!
Thanks

change the name of the email field in the form from
Email
to
email
and formmail clone will use it as the "from" and "reply to"
in the outgoing
email. You'll probably have to also change the case in the
javascript
validation behavior.
<input name="Email" type="text" id="Email" size="50">
<input name="email" type="text" id="email" size="50">
on the next problem- I think it's a syntax problem in the
table structure.
find this, at the start of the form code.
<table width="325" border="0" cellpadding="2"
cellspacing="4">
<input type="hidden" name="recipient"
value="[email protected]">
<!--This is what will appear in subject line of email
with response sent
to Jeannie-->
<input type=hidden name="subject" value="Contact Form
Response from
Center for Creativity"><br>
<!--This is will appear in subject line of email with
response sent to
Jeannie-->
<input type=hidden name="redirect"
value="
http://www.center4creativity.org/temp/thankyou.htm">
<input type="hidden" name="from"
value="[email protected]">
<p>
<tr valign="top">
<td colspan="2">
the stuff between <table> and <tr> is in no man's
land. There can't be other
tags there. Move it to after the <TD> tag, so it's
inside a table cell. And
remove the <P> tag. And remove the hidden field for
"from" because it ain't
gonna do nuthin'.
<table width="325" border="0" cellpadding="2"
cellspacing="4">
<tr valign="top">
<td colspan="2"> <input type="hidden"
name="recipient"
value="[email protected]">
<input type=hidden name="subject" value="Contact Form
Response from
Center for Creativity">
<input type=hidden name="redirect"
value="
http://www.center4creativity.org/temp/thankyou.htm">
google on formmail clone instructions
or go to
http://scriptarchive.com
-->formmail-->readme for details of all
the form field names that can control the behavior of the
form script.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Similar Messages

  • Forms personalization and global variable

    Hi,
    I'm trying to call a procedure in forms personalization and using a defined global variable. The data in the global variable is number. In the procedure, some of the parameter has a number datatype and I'm converting the global variable using to_number eg (to_number(:global.XX_LINE_NUM). This fails with error message ora-01403 no data found. I've tried putting the above into a variable with datatype number in the declare statement, and it errors as well.
    Does anyone knows the syntax to convert the global variable to number datatype in personalization.
    Thanks

    Ask in this forum : OA Framework

  • Distinguishing between Form and URL variables

    My mind isn't working like it should today, but what I am trying to do is:
    1) alter a page via passing a argument in the URL
    2) store this in a hidden field within the form on the page
    3) retrieve the hidden field when the page is refreshed or in this case manipulated again for printing.
    Basically, I have a report screen that allows the user to toggle between paging 1 page at a time or show all pages. If they click for all pages I pass a variable (allPages), and store it in a hidden field (allPages). Now if the user presses the "Print" button I reload the page stripping out form elements and put in Page breaks so that the report prints fairly nicely. Whats not working is my ability to differentiate between the parameter passed in the URL and the parameter contained within the form.
    I am currently able top get the URL passed parameter via:
    request.getParameter("allPages")
    Is there a way to check for the form element, if it exist then use it else check for the URL passed parameter, or default it.
    Thanks in advance.

    I wonder, why you didn't use two different name for the parameter via URL and via Form, so your program should can easily distinguish where come from where, am I right?
    The other way, you may check the method, whether it is "post" or "get", the get method is what you said as via URL and post normally use by form. But I think, it is better use two different parameter for Form and URL.

  • Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

    Dear Community Friends,
    We are planning for upgrade from oracle apps 11.5.10.2 to R12.
    We have custom Forms,Form Libraries,Reports and Workflows.
    Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
    I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
    I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
    Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
    Links i have read for all these in our forum are:
    For Custom Forms,
    Re: Planning to upgrade from 11i to R12
    Re: Custom forms: After upgrading 11i to R12
    ofcourse,'n' number of links exists providing metalink notes also.
    Hussain,Helios and some others also has given many updates regd this.
    For custom workflow upgradation,
    Upgrade Workflow 11i to R12
    Workflow Upgrade
    Workflow Upgrade
    For reports,links mentioned the below metalink notes:
    Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
    Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
    Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
    Please correct me,if i am wrong.
    1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
    2) Open the forms using Forms Developer 10G and connect to DB
    3) Compile by clicking compilein Forms Developer and then save it.
    4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
    5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
    this will generate the .fmx's.
    frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
    Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
    6) Open the form and check in R12 instance
    As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
    Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
    As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
    Some says that reports should be converted to XML published as reports does not exists in R12.
    So,i am not clear on this.
    Thanks,
    Ganesh
    [email protected]

    Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
    Please correct me,if i am wrong.
    1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
    2) Open the forms using Forms Developer 10G and connect to DB
    3) Compile by clicking compilein Forms Developer and then save it.
    4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
    5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
    this will generate the .fmx's.
    frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
    Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
    6) Open the form and check in R12 instance
    As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
    Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
    As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
    Some says that reports should be converted to XML published as reports does not exists in R12.
    So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
    For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
    Thanks,
    Hussein

  • I have registered on my PC two devices iPhone 5 and iPod Touch 4 now I am using only the iPhone 5. I have two different apple ID`s and yesterday I have FB update and from app store wanted to sign in with the ID form iPod Touch 4 how to fix it?

    I have registered on my PC two devices iPhone 5 and iPod Touch 4 now I am using only the iPhone 5. I have two different apple ID`s and yesterday I have FB update and from app store wanted to sign in with the ID form iPod Touch 4 how to fix it? I want to use my current Apple ID not the old one. Regards!

    Try this
    http://support.apple.com/kb/ht1495
    Hope it helps.

  • Reading and writing to and from a file to a form

    Hi there
    I would like somebody to send me a code example,
    showing me how to reading records from a file to a form,
    and writing records to the same file from the same form.
    I know that I have to use sycronize, but I just have not been
    successful. I can constract forms, go from form to a form,
    do buttons, do text fields. I can even read and write from and
    to files. However I cannot do is write from a file to a form and
    from a form to a file.
    could somebody please explain how this done, and could you
    please give me a code example. All the books seem to either
    deal with forms or with files. None seem to combine both.
    I am sure it is very ease to do if ONLY I knew how!!!
    thank you very much in advance for you help.

    I understand that code and I have used it before, however thanks for
    trying to help me, it is really appreciated. However, that is not my
    problem. I can read and write from a file to the console and vice versa.
    what I cannot do, no matter how hard I try, is to write from a file, and
    output it in.
    I will tell you how far I have got.
    I have a MenuFrame class, this is the code for it:
    package WorkflowApp;
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import java.io.*;
    public class MenuFrame extends JFrame {
    JMenuBar menuBar1 = new JMenuBar();
    JMenu menuFile = new JMenu();
    JMenuItem menuFileExit = new JMenuItem();
    JMenu menuHelp = new JMenu();
    JMenuItem menuHelpAbout = new JMenuItem();
    JToolBar toolBar = new JToolBar();
    JButton jButton1 = new JButton();
    JButton jButton2 = new JButton();
    JButton jButton3 = new JButton();
    ImageIcon image1;
    ImageIcon image2;
    ImageIcon image3;
    JLabel statusBar = new JLabel();
    Button button2 = new Button();
    Button button3 = new Button();
    Button button4 = new Button();
    Button button5 = new Button();
    Button button6 = new Button();
    Button button7 = new Button();
    Button button1 = new Button();
    //Construct the frame
    public MenuFrame() {
    enableEvents(AWTEvent.WINDOW_EVENT_MASK);
    try {
    jbInit();
    catch(Exception e) {
    e.printStackTrace();
    //Component initialization
    private void jbInit() throws Exception {
    image1 = new ImageIcon(WorkflowApp.MenuFrame.class.getResource("openFile.gif"));
    image2 = new ImageIcon(WorkflowApp.MenuFrame.class.getResource("closeFile.gif"));
    image3 = new ImageIcon(WorkflowApp.MenuFrame.class.getResource("help.gif"));
    this.getContentPane().setLayout(null);
    this.setSize(new Dimension(400, 492));
    this.setTitle("MenuFrame");
    statusBar.setText(" ");
    statusBar.setBounds(new Rectangle(0, 0, 3, 17));
    menuFile.setText("File");
    menuFileExit.setText("Exit");
    menuFileExit.addActionListener(new ActionListener() {
    public void actionPerformed(ActionEvent e) {
    fileExit_actionPerformed(e);
    menuHelp.setText("Help");
    menuHelpAbout.setText("About");
    menuHelpAbout.addActionListener(new ActionListener() {
    public void actionPerformed(ActionEvent e) {
    helpAbout_actionPerformed(e);
    jButton1.setIcon(image1);
    jButton1.setToolTipText("Open File");
    jButton2.setIcon(image2);
    jButton2.setToolTipText("Close File");
    jButton3.setIcon(image3);
    jButton3.setToolTipText("Help");
    toolBar.setBorder(null);
    toolBar.setBounds(new Rectangle(2, 2, 389, 30));
    button2.setBounds(new Rectangle(217, 62, 135, 44));
    button2.setLabel("Staff Details");
    button2.addActionListener(new java.awt.event.ActionListener() {
    public void actionPerformed(ActionEvent e) {
    button2_actionPerformed(e);
    button3.setBounds(new Rectangle(26, 127, 135, 44));
    button3.setLabel("Arange Viewing");
    button3.addActionListener(new java.awt.event.ActionListener() {
    public void actionPerformed(ActionEvent e) {
    button3_actionPerformed(e);
    button4.setBounds(new Rectangle(218, 127, 136, 41));
    button4.setLabel("Valuation");
    button4.addActionListener(new java.awt.event.ActionListener() {
    public void actionPerformed(ActionEvent e) {
    button4_actionPerformed(e);
    button5.setBounds(new Rectangle(28, 196, 135, 41));
    button5.setLabel("Schedule");
    button6.setBounds(new Rectangle(221, 194, 133, 40));
    button6.setName("button6");
    button6.setLabel("Register Interest");
    button7.setBounds(new Rectangle(31, 266, 133, 42));
    button7.setLabel("Register Offers");
    button1.setBounds(new Rectangle(27, 62, 131, 42));
    button1.setLabel("New Client");
    button1.addActionListener(new java.awt.event.ActionListener() {
    public void actionPerformed(ActionEvent e) {
    button1_actionPerformed(e);
    menuFile.add(menuFileExit);
    menuHelp.add(menuHelpAbout);
    menuBar1.add(menuFile);
    menuBar1.add(menuHelp);
    this.setJMenuBar(menuBar1);
    this.getContentPane().add(statusBar, null);
    this.getContentPane().add(toolBar, null);
    toolBar.add(jButton1);
    toolBar.add(jButton2, null);
    toolBar.add(jButton3, null);
    this.getContentPane().add(button3, null);
    this.getContentPane().add(button5, null);
    this.getContentPane().add(button7, null);
    this.getContentPane().add(button2, null);
    this.getContentPane().add(button4, null);
    this.getContentPane().add(button6, null);
    this.getContentPane().add(button1, null);
    //File | Exit action performed
    public void fileExit_actionPerformed(ActionEvent e) {
    System.exit(0);
    //Help | About action performed
    public void helpAbout_actionPerformed(ActionEvent e) {
    MenuFrame_AboutBox dlg = new MenuFrame_AboutBox(this);
    Dimension dlgSize = dlg.getPreferredSize();
    Dimension frmSize = getSize();
    Point loc = getLocation();
    dlg.setLocation((frmSize.width - dlgSize.width) / 2 + loc.x, (frmSize.height - dlgSize.height) / 2 + loc.y);
    dlg.setModal(true);
    dlg.show();
    //Overridden so we can exit on System Close
    protected void processWindowEvent(WindowEvent e) {
    super.processWindowEvent(e);
    if(e.getID() == WindowEvent.WINDOW_CLOSING) {
    fileExit_actionPerformed(null);
    void button2_actionPerformed(ActionEvent e) {
    StaffDetails myFrame = new StaffDetails();
    myFrame.show();
    void button3_actionPerformed(ActionEvent e) {
    ArrangeViewing myFrame = new ArrangeViewing();
    myFrame.show();
    void button1_actionPerformed(ActionEvent e) {
    NewClientFrame myFrame = new NewClientFrame();
    myFrame.show();
    // System.exit(1);
    void button4_actionPerformed(ActionEvent e) {
    Valuation myFrame = new Valuation();
    myFrame.show();
    then I have a new form class, this is the code for it
    package WorkflowApp;
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class NewClientFrame extends JFrame {
    Label label1 = new Label();
    Label label2 = new Label();
    Label label3 = new Label();
    Label label4 = new Label();
    Label label5 = new Label();
    Label label6 = new Label();
    Label label7 = new Label();
    Label label8 = new Label();
    Label label9 = new Label();
    Label label10 = new Label();
    TextField textField1 = new TextField();
    TextField textField2 = new TextField();
    TextField textField3 = new TextField();
    TextField textField4 = new TextField();
    TextField textField5 = new TextField();
    TextField textField6 = new TextField();
    TextField textField7 = new TextField();
    TextField textField8 = new TextField();
    TextField textField9 = new TextField();
    TextField textField10 = new TextField();
    Button button1 = new Button();
    Button button2 = new Button();
    //Construct the frame
    public NewClientFrame() {
    enableEvents(AWTEvent.WINDOW_EVENT_MASK);
    try {
    jbInit();
    catch(Exception e) {
    e.printStackTrace();
    //Component initialization
    private void jbInit() throws Exception {
    this.getContentPane().setLayout(null);
    this.setSize(new Dimension(411, 488));
    this.setTitle("NewClientFrame ");
    this.addWindowListener(new java.awt.event.WindowAdapter() {
    public void windowClosing(WindowEvent e) {
    this_windowClosing(e);
    label1.setBounds(new Rectangle(21, 23, 110, 23));
    label1.setAlignment(2);
    label1.setText("Assign Number");
    label2.setBounds(new Rectangle(23, 57, 108, 25));
    label2.setAlignment(2);
    label2.setText("Name");
    label3.setBounds(new Rectangle(40, 91, 94, 24));
    label3.setAlignment(2);
    label3.setText("Address 1");
    label4.setBounds(new Rectangle(21, 124, 112, 29));
    label4.setAlignment(2);
    label4.setText("Address 2");
    label5.setBounds(new Rectangle(20, 159, 116, 29));
    label5.setAlignment(2);
    label5.setText("PoscCode");
    label6.setBounds(new Rectangle(18, 197, 119, 26));
    label6.setAlignment(2);
    label6.setText("Telephone");
    label7.setBounds(new Rectangle(25, 228, 112, 26));
    label7.setAlignment(2);
    label7.setText("Other Telephone");
    label8.setBounds(new Rectangle(12, 261, 125, 24));
    label8.setAlignment(2);
    label8.setText("Email Address");
    label9.setBounds(new Rectangle(6, 301, 138, 25));
    label9.setAlignment(2);
    label9.setText("Staff Assigned (Name)");
    label10.setBounds(new Rectangle(22, 341, 124, 23));
    label10.setAlignment(2);
    label10.setText("Staff Assigned (No.)");
    textField1.setBounds(new Rectangle(155, 19, 80, 26));
    textField2.setBounds(new Rectangle(155, 58, 193, 24));
    textField3.setBounds(new Rectangle(156, 90, 192, 25));
    textField4.setBounds(new Rectangle(157, 126, 192, 23));
    textField5.setBounds(new Rectangle(157, 159, 195, 25));
    textField6.setBounds(new Rectangle(157, 194, 195, 26));
    textField7.setBounds(new Rectangle(157, 230, 192, 24));
    textField8.setBounds(new Rectangle(157, 263, 193, 25));
    textField9.setBounds(new Rectangle(157, 303, 196, 24));
    textField10.setBounds(new Rectangle(158, 337, 95, 24));
    button1.setBounds(new Rectangle(23, 398, 144, 34));
    button1.setLabel("Staff Available");
    button2.setBounds(new Rectangle(211, 396, 148, 34));
    button2.setLabel("Submit Record");
    button2.addActionListener(new java.awt.event.ActionListener() {
    public void actionPerformed(ActionEvent e) {
    button2_actionPerformed(e);
    this.getContentPane().add(label1, null);
    this.getContentPane().add(label2, null);
    this.getContentPane().add(label3, null);
    this.getContentPane().add(label4, null);
    this.getContentPane().add(label5, null);
    this.getContentPane().add(label6, null);
    this.getContentPane().add(label7, null);
    this.getContentPane().add(label8, null);
    this.getContentPane().add(label9, null);
    this.getContentPane().add(label10, null);
    this.getContentPane().add(textField1, null);
    this.getContentPane().add(textField2, null);
    this.getContentPane().add(textField3, null);
    this.getContentPane().add(textField4, null);
    this.getContentPane().add(textField5, null);
    this.getContentPane().add(textField6, null);
    this.getContentPane().add(textField7, null);
    this.getContentPane().add(textField8, null);
    this.getContentPane().add(textField9, null);
    this.getContentPane().add(textField10, null);
    this.getContentPane().add(button1, null);
    this.getContentPane().add(button2, null);
    public void fileExit_actionPerformed(ActionEvent e) {
    System.exit(0);
    // exit(this);
    // close();
    //Overridden so we can exit on System Close
    protected void processWindowEvent(WindowEvent e) {
    super.processWindowEvent(e);
    if(e.getID() == WindowEvent.WINDOW_CLOSING) {
    System.exit(0);
    void button2_actionPerformed(ActionEvent e) {
    // myFrame.close();
    this.dispose();
    void this_windowClosing(WindowEvent e) {
    this.dispose();
    I also have an about box, staff details, and valuation forms.
    what I am trying to do is for the New client form to be able to read and write from and to a file, and display the info.
    I am working in JBuilder3, a bit out of date I know, but it is the best I can do. Any Ideas how to do this.

  • WCF Service and Sharepoint Form library : How i can read a access a form libray and query a item from file name and read form xml in WCF service ?

    WCF Service and Sharepoint Form library : How i can read or access a form libray and query a item from file name and read form xml in WCF service ?
    Ahsan Ranjha

    Hi,
    In SharePoint 2013, we can take use of REST API or Client Object Model to access the SharePoint objects like Form Library.
    SharePoint 2013 REST API
    http://msdn.microsoft.com/en-us/library/office/dn450841(v=office.15).aspx
    http://blogs.technet.com/b/fromthefield/archive/2013/09/05/working-with-sharepoint-list-data-odata-rest-and-javascript.aspx
    SharePoint 2013 Client Object Model
    http://msdn.microsoft.com/en-us/library/office/fp179912(v=office.15).aspx
    http://msdn.microsoft.com/en-us/library/office/jj193041(v=office.15).aspx
    With the retrieved file, we can then use XmlDocument object to parse it and get the values you want:
    http://weblogs.asp.net/jimjackson/opening-and-reading-an-xml-file-in-a-document-library
    http://stackoverflow.com/questions/1968809/programatically-edit-infopath-form-fields
    Best regards
    Patrick Liang
    TechNet Community Support

  • Varying result set and binding parameters in sqlcmd from variable

    SSIS  - Support of Multiple versions of our product
    Our Enterprise Data warehouse consolidates data from multiple data sources.  We have a requirement that we should be able to support data collection from different version of these data sources at the same time.
    Ex. Customer has three different versions of our product installed 7.3,  7.3.1 and 7.3.2. The data warehouse would in this case would be on version 7.3.2, but should be able to collect data from prior versions of the data sources.
    We use stored procedures to collect data from sources into our staging area and then we transform and load it on to the warehouse. The design of SSIS packages are that, there is one main package that executes packages for each table that we collect data
    from the source. The main package is invoked per source that we need to collect data from, if there are three sources at run time there will be three instances of the main package running. These packages run on the warehouse machine to pull the data from the
    source system.
    We would like to maintain one version of these packages on the warehouse and support collecting data from different source versions.
    Challenges
    The signature of stored procedures on the source system has changed between versions
    There are some additional fields returned by these stored procedures in the newer release
     Example
     7.3 version signature :
    [dbo].[PDW_GetMediaAgentSummary](@LastVersionID
    AS BIGINT,
    @InitializeDays as
    INT = 60,
    @NextVersionID AS
    BIGINT OUTPUT)
    7.3 Sp1 version signature:  [dbo].[PDW_GetMediaAgentSummary](@LastVersionID
    AS BIGINT,
    @DataStartDate AS
    DateTime2(3),
    @NextVersionID AS
    BIGINT OUTPUT)
     Also, let us say in 7.3 this stored procedure returned 8 fields and 7.3 sp1 it is returning 10 fields.
    The way we are trying to accommodate is to use “SQLCmd from variable” option in the OLE DB source to cover the signature difference, but this option does not allow us to bind parameters
    to variables to get the output value. The second issue of additional fields (or the lack of additional fields from the 7.3 procedure), we tried to turned off the metadata validation, but we get field not found error at run time when we run the SSIS package
    against 7.3 version. Looks like the only way we could solve is to duplicate the data flow tasks, based on the source version. Looking for better way to do this, since this could go out of control as the number of releases increases.
    Appreciate help on this.

    I suggest you branch your package into one route vs another based on some flag that indicates version the package is connected to then it will execute one stored proc or another, this can be done
    using the Precedence Constraints, or make a wrapper stored proc that hides the data differences between the versions.
    Arthur
    MyBlog
    Twitter

  • How to deploy Forms, Reports and Menu from Client to Server machine

    Dear Experts,
    I have one requirement to deploy the Forms, Reports and Menu from client machine to server machine.
    Deployment involves the following steps :
    1. Firstly we have to search the selected file in a folder where the .fmx is present ( in Server machine) and take the back up of the the existing file in the server (Source and destination paths will be available).
         Ex. If the existing FMB name is TEST.fmx then the backup file should be TEST_sysdate.fmx.
    2. Secondly we have to transfer the file from the client folder (or from another folder of the same server) to the server folder where the back up exists.
    Please help me to search/rename/copy/replace the _.fmx/.rdf/.rep/.mmx_ files from client to server.
    We are using
    9i Database.
    10g Forms and reports.
    SQL Developer tool.
    OS is Windows (Client and Server).
    Help me out to attach a file of front end screen which we are planning to develop. It will give a clear picture on this requirement.
    Thanks :)
    Edited by: 941175 on Jun 17, 2012 9:09 AM
    Edited by: 941175 on Jun 17, 2012 9:12 AM
    Edited by: 941175 on Jun 17, 2012 9:14 AM

    941175
    Welcome to the forum. Please take a while to go through the FAQ to be found to the top right of the page.
    Your issue is more to do with batch files rather than Forms. The only relation with Forms, as I see it, is that you will be using HOST/CLIENT_HOST to start a batch file with the file name to be deployed as a parameter passed to it.
    You need to rewrite either a CMD batch file or a Powershell script to achieve what have set out to do.
    For CMD batch files look up http://www.robvanderwoude.com/battech.php , or any of the other excellent resources available on the internet.
    Regards,

  • How i can make forms read form nls and reports read from anather

    hi evrey one
    how i can make forms read form nls_lang and reports read from anather nls_lang ,
    I think that this property is found in the file format .ini,
    I forgot his name,
    Is there one has found this information,
    pleez share.
    thanks.

    At a minimum, the creation of the TcpClient will need to change its parameter to the name of server you want to use:
    TcpClient tClient = new TcpClient("gmail-smtp-in.l.google.com", 25);

  • Running forms 6i and reports 6i from oracle portal

    hi all,
    is it possible to run the forms and the reports developed in
    forms 6i and reports 6i from oracle portal
    or
    is it possible to export forms 6i and reports 6i into oracle
    portal
    prabhakaran

    Dear Friend,
    It is possible to deploy 6i forms & reports by Apache Web
    Listener. You will have to edit the httpd.conf configuration
    file and add your virtual path as Alias. The Virtual Paths are
    /dev60html/
    /dev60cgi/
    /jinitiator/
    /dev60temp/
    Reply me if youre are successful.
    Thanx.

  • CFPOP and the FROM variable

    I use CFPOP too read mails,
    And I want to do different processing following the email adress found in the
    FROM variable.
    But, depending of the Mail agent sending mails,
    The FROM variable contains different types of values :
    1 - can be the Email (alone)
    2 - can be the name of the person, without any email
    3 - can be the name of the person followed by the email
    4 - can be the name of the person followed by an email of the mail server.
    As I need to find the Email of the sender, only in cases 1 and 3 can give me the right email.
    Can someone explain this ?
    I do not see anything in CF to solve this, even in programming or in the CF administrator.
    I have the impression that , what is retruned in the "FROM" depends of the mail server ?
    Thanks for any help, explanation on that subject,
    Pierre.

    Thanks for your suggestion,
    the header variable does not give the Email adress of the sender,
    it gives the same : the person name.
    here is the result of that variable :
    Received: from [192.168.13.131] by email.images-creations.fr [192.168.13.209] with SmartMax MailMax for [email protected]; Tue, 18 Oct 2011 16:56:29 +0200 Return-Path: X-SmartMax-AuthUser: Received: from mx1-1.images-creations.fr (localhost [127.0.0.1]) by mx1-1-relay.images-creations.fr (Postfix) with ESMTP id 76EC432E0D9 for ; Tue, 18 Oct 2011 16:56:26 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on mx1-1.images-creations.fr X-Spam-Level: ***** X-Spam-Status: No, score=6.0 required=8.0 tests=BAYES_50,HTML_MESSAGE, LIMSI_S36,RCVD_IN_NJABL_PROXY,TVD_SPACE_RATIO autolearn=no version=3.2.5 Received: from smtp.smtpout.orange.fr (smtp12.smtpout.orange.fr [80.12.242.134]) by mx1-1.images-creations.fr (Postfix) with ESMTP id 63CFE32E0D5 for ; Tue, 18 Oct 2011 16:56:26 +0200 (CEST) Received: from StationDev ([80.14.60.39]) by mwinf5d47 with ME id mEwR1h00J0qnSTU03EwRkh; Tue, 18 Oct 2011 16:56:26 +0200 X-ME-engine: default From: "Pierre LARDE" To: Subject: 13744 Date: Tue, 18 Oct 2011 16:56:24 +0200 Message-ID: <000501cc8da6$1b58e540$520aafc0$@fr> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0006_01CC8DB6.DEE1B540" X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: AcyNpfyCtDyvnB33RuaPaOwckewWUg== Content-Language: fr
    the From is there also the name , not an Email.
    Thanks for any other suggestion,
    Pierre.

  • CFPOP and the FROM variable content

    I use CFPOP with no problem,
    except that when I send from my OutLook,
    the FROM variable content is a name (my name)
    not an Email adress.
    I need the Email adress like : [email protected]
    which is the unic identifier
    I am under CF 7 (or CF 8)
    How to get the Email adress in the  "from" variable of the CFPOP ?
    Thanks to any help
    plarts
    Messages: 6
    Inscription: Dim 21 Mar 2010 17:26
    Message privé
    E-mail

    I send (myself, as an example, could be anybody else) a mail to an Email address xxxx,
    With CFpop I want to get this mail and identify the sender with the Email adress (in the from variable).
    So in the "from" variable of CFpop , I should get the Email adress of the sender.
    Then 2 cases :
    - If the mail is sent from Outlook , the "from" content have the name of the person (not the Email adress)
         (and different person can have the same name)
    - If the mail is sent from a Webmail, the "from" content has the Email adress (format [email protected])
         (the email adress is unique)
    And I need the Email adress (not the name of the sender) to Identify the person in the DataBase.
    Hope, this is clearer ?
    Thanks for your help.
    Pierre

  • Difference between Replacement with a query and Replacement from Variable

    Hi Gurus
    Would explain the difference between the Replacement Path: Replacement with a query and Replacement Path: Replacement from Variable with scenarios.
    Thanks in advance,
    Aravind.S

    Hi,
    If you are using Replacement with query, the given query output will be used as input your variable. For example if you want to display the product details, which can be find our from a query.
    And Replacement with Variable will be used  when you want to give the same input  in two different fields. for example if you want to see the records from sending location and not the records from recived location at the same time. Here once you give the sending location id, it will be taken as the same input for received location.
    Regards,
    Vishnu

  • Calling Reports from Forms (run_report_object and then Web.Show_document)

    Hi all,
    we are in the process to prepare a Forms-Migration from 6i to 10g and like probably most of the other Forms-Customers we also use Reports.
    We have setup a test-scenario with Forms/Reports Standalone Installation. So we have some Forms running and we are now starting to test reports.
    I have created a Test-Form to call run_report_object in the documented way. That means described in the white paper. set the parameters, then call the run_report_object BUILTIN and when the job is finished, I do a call to the Web.Show_Document BUILTIN with "getjobid". As destype I use "CACHE"
    So far so good, that works like a charm.
    But after seeing the output in the browser, I can use the URL as a template and only change the jobid and then I can see all other reports as well, whether the output is from me or not. Even worse if I change the URL to use the command "showjobs" I can see a nice list with all the output and can click and see all of them.
    Is there a way to secure this in an easy way.
    I have read the white papaer about securing the use of WEB.SHOW_DOCUMENT with a cookie, but that sounds to me that it is meant if I want to run the report with that builtin which isn't the case I am willing to run the Report with "RUN_REPORT_OBJECT" which is secure enough to me, but the output of all jobs can be seen from anybody.
    Because we use the Forms/Reports Standalone Installation (because of License-Costs, ...) Single-Sign_on is no option for us we only want a situation where we can do the same as before.
    Run a report, see the output and nobody else can see it.
    If anybody has an idea how to do it, that would be great.
    Thanks,
    Mark

    thanks for the answers,
    but I'm still thinking that there is no "easy" Migration-Solution for our request.
    Running a report and after doing whatever needs to be done (read, print, ...) and don't care about additional security because nobody else can read it.
    But that might be the price for the bunch of new features in the "Web"-World were you never know where your application runs and you have to secure a lot more stuff then before.
    Anyway I think we proceed with a combination out of the adviced Metalink Note : 437246.1. We can set the expiration-parameter, we cannot set diagnostic=NO because we use Run_Report_Object but we can change httpd.conf and we reject all calls to showmap, showjopbs, etc.
    I'm not sure whether we need the rewrite part, but we'll see.
    Thanks,
    Mark

Maybe you are looking for

  • How to pass bind variable in report

    I'm trying to add tables and chart based of the value selected by the user using the filters. l_param_values := MGMT_IP_PARAM_VALUE_LIST(); l_param_values.extend(13); l_param_values(1) := MGMT_IP_PARAM_VALUE_RECORD ( 'oracle.sysman.eml.ip.render.elem

  • Itouch 4G not recognised in Windows XP or Itunes.

    I am trying to get my music on my new 64GB 4G Touch.  It doesn't show on my laptop or 'Devices' in iTunes.  The diagnostic in iTunes shows no Touch connected.  I have followed the links on the support pages and troubleshooting guides.  I have gone in

  • Maintenance order - Copy header long text in first operation.

    Hi gurus, I have the following requirement I dont know hoy to solve it. In our system, there is a certain maintenance order class for corrective operations. During creation, the short text in order header is transferred automatically to the first ope

  • Eliminate Nag Screens PSE 8.0

    Am running a registered installation of Photoshop Elements 8.0.  Each time I launch the program I get two "Nag Screens" which I want to eliminate.      (1) A screen that offers me the opportunity to buy more online storage space.  Unless I quickly cl

  • Safari crashing info included

    Here is the info that showed up the last time it crashed. Let me know if anyone can help. Thanks Date/Time: 2008-12-08 19:21:23.236 -0600 OS Version: 10.4.11 (Build 8S165) Report Version: 4 Command: Safari Path: /Applications/Safari.app/Contents/MacO