Forms Runtime Process and OC4J - Can I separate them?

Hello,
I was reading a Oracle Application Server Forms 10g material.
One thing that come to my mind was that can Forms Runtime Process
run in physically different host than OC4J J2EE Application Server?
Does anyone have any information of this issue?
Cheers!

Hi,
you cannot separate the runtime from OC4J. But you can separate the HTTP Server from OC4J
Frank

Similar Messages

Forms runtime processes and prestart settings

Hi
I have an App Server 10.1.2.2.0 and this is running on Windows 2003 64-bit.
In my formsweb.cfg file I have the following settings:
prestartRuntimes=True
prestartTimeout=0
prestartInit=5
prestartMin=5
When I start Forms services I was expecting 5 runtime processes to start however I actually get 25. I'm not sure why but is this because prestartInit is multiplied by prestartMin? I thought there would be initially 5 runtime processes to start with and this would never go below 5, i.e. prestartMin=5.
Any comments are appreciated.
Thanks
Andy

Hi Andy,
I agree with your expectation to see 5 processes. But maybe the others come from different configuration-Sections in formsweb.cfg.
We have tested a bit with prestart, but I think our real requirement (let's say I want to have betweeb 5 and 10 spare processes available all the time and not only for q couple of time after restarting OC4J) cannot be fulfilled with IAS 10. Hopefully with 11 we'll see.
kind regards,
Mark

Set up ios tw days ago on my iphone5 and it merged my two email accounts and I can't separate them. I'm sure there is a fix but I can't seem to come up with it. Appreciate the help.

Is there an any way to correct this. I tried separating the accounts but the icon will not activate

NO I have two email accounts and when I check the inbox it dumps both inbox messages together. One is primarily business and the other is primarily personal. There's an icon that says accounts on the inbox page. I thought I could hit that and I could separate them that way but its not active.

Forms Runtime Process

Hi,
It is my understanding that only one forms runtime process is spawned per session.
Is this the case? So everytime you call a new form you shouldnt be opening a new
forms runtime process correct?
Thanks!

Hi
CALL_FORM, OPEN_FORM, NEW_FORM are the Built-ins that will help us in creating “Multiple Form Applications”.
This built-in is used to invoke more than one form in a single session.
So everytime you call a new form you shouldnt be opening a new forms runtime process correct?If you are using
NEW_FORM, you are starting a new form and terminating the current EXISTING form.
OPEN_FORM opens the new Form but also keeps the calling form open and running.
The third way to execute another form is the
CALL_FORM builtin. This would call a new form and suspend execution of the calling form. Once the called form is exited, the control is returned to the calling form.
Usefull to see the On-Line help & pls Study this link...
http://dbdeveloper.narod.ru/97521f.html
Hope this helps
Regards,
Abdetu...

Maximim Number of process and session can set in oracle 10g

my os is 32 bit windows and ram size is 10gb and i am using AWE_WINDOW_MEMORY setting and now my sga is 6 gb.what would be Maximim Number of process and session can set in oracle 10g database

mithun wrote:
my os is 32 bit windows and ram size is 10gb and i am using AWE_WINDOW_MEMORY setting and now my sga is 6 gb.what would be Maximim Number of process and session can set in oracle 10g databaseThe maximum number of sessions is controlled by your database's SESSIONS parameter. This value is most derived from the PROCESSES parameter. You cannot exceed this number of sessions unless you raise the parameter value.
If your database is configured to handle enough sessions, then Oracle can literally handle thousands of simultaneous connections, provided your database server also has enough resources to handle this number of connections. You will want to implement Oracle's Shared Server connections so that multiple connections share a pool of processes on the database server. This minimizes the resource consumption used by the connections.
Read the following document as well.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/manproc.htm
Thanks

Files Renamed when importing to LR4 and now can't find them in LR3

Help! What should I do???
Yesterday I installed LR 4 Beta. I had a folder with 300 images in it on LR 3, obviously all files had names. I imported these photos into LR4 to work with LR4 and they were renamed in the process. Now in my LR3 folder, all the files still have there old names and the "missing photo ?" and I assume that's because the name has been changed and LR3 can't find them. Any thoughts on an easy fix?
Thanks,
Matthew Kraus

Thanks so much for helping me with this.
I must admit, I didn't pay too much attention when importing this "test"
group of photos to LR4, therein lies my problem. Now that I look at the
import settings that were used:
1. Files were not added or copied, they were "moved" to a new location and
also renamed.
2. Files were renamed starting with "264" using my regular import template.
Listed below are the first 10 photos with their original LR3 and he
changed LR4 names.
1201_001 changed to 1201_264-2
1201_002 changed to 1201_265-2
1201_003 changed to 1201_266-2
1201_004 changed to 1201_267-2
1201_005-Edit-Edit changed to 1201_268-2
1201_005-Edit changed to 1201_269-2
1201_005-Edit changed to 1201_270-2
1201_005-Edit-Edit-2 changed to 1201_271-2
I have a back up of my images on an EHD from several days ago which has the
original file names, but this backup only has 203 of the 268 images I
imported yesterday and are renamed.
Thanks again,
Matthew Kraus
2012/1/11 Dorin Nicolaescu-Musteață <[email protected]>
Re: Files Renamed when importing to LR4 and now can't find them in LR3 created by Dorin
Nicolaescu-Musteață <http://forums.adobe.com/people/dorin_nicolaescu> in *Photoshop
Lightroom* - View the full discussion<http://forums.adobe.com/message/4132062#4132062>

Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order.

Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order. This onloy seems to happen when I double-click on the song to play it in itunes. If I just hit play, this doesnt happen. As a result, I have several albums now in which the songs are in the wrong order. Its very frustrating, as this error then transfers over to my ipod every time I sync it. When I choose the info. for the songs, it has them correctly listed (i.e., it lists the songs as being #1 of 19 on the CD, for example). But then the song will have placed by Itunes as #5 of 19 for whatever reason. Itunes does not do this every time, but does it with enough frequency to be maddening. Any thoughts?

The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck.

How can I found out the No. of Psocess running and How can I Release them

Dear experts,
How can I found out the No. of Psocess running and How can I Release them.
I have 1GB RAM with oracle 10G. and please tell me How many processes can run with this RAM.

>How can I found out the No. of Psocess running
well, that depends on where you are ? if you are on windows then task manager will tell you what all processes are running. if you are on unix then ps -ef will tell you about all the processes running on a particular machine
How can I Release them.
what do you exactly mean by Release ? if you mean "end" that again has 2 scenarios, first that process ends by itself (ie after completing its job), another can be killing the process , that again will depend upon operating system. in windows you can kill a process from task manager itself, in unix you can use kill -9 PID to kill a process.
How many processes can run with this RAM.
loads of other details required before one can answer this question.no of processes in a very simple manner will depend how much memory is available and how much a process is eating.
Sidhu

My iMac has a1T hard drive,and it is full!. So i look for archives and there are 6000 mailrecoveredfrom gmail, and i can not erase them. Is it a virus? What can i do?

My iMac has a 1T hard drive and it is full ! So i look for the archives and there are6000 mails recovered from gmail and i can not erase them. Is it a virus?
What can i do ?

It sounds like a runaway process is filling up your volume.
Boot in safe mode. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including your login items.
Use a tool such as the one linked below to explore your volume and find out what's taking up the space:
OmniDiskSweeper - Products - The Omni Group

Working alternating with iPhoto and FCE tgrying to import pictures from iPhoto into FCE suddenly all my 22300 pictures disappeared leaving empty frames. Does somebody know where the pictures could have gone and how can I get them back into iPhoto? Lothar

Working alternating with iPhoto and FCE tgrying to import pictures from iPhoto into FCE suddenly all my 22300 pictures disappeared leaving empty frames. Does somebody know where the pictures could have gone and how can I get them back into iPhoto? Lothar

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

HT1351 Some of the songs I bought from iTunes will not sync to my iPhone. They show up on my phone, but the letters look faed and I can't play them. How do I fix this? I tried restoring my iPhone and it didn't work.

Some of the songs I bought from iTunes will not sync to my iPhone. They show up on my phone, but the letters look faed and I can't play them. How do I fix this? I tried restoring my iPhone and it didn't work.

Sorry, I meant the letters look "faded" not faed.

When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect.

When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect on the phantom playlist that shows up on the PC when I plug in the iPhone to the PC. I cannot manually move songs or playlists from the PC to the iPhone
Help greatly appreciated.

Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this

I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5, the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed though.

I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5 (could play them), the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed in the iTunes library. When I look in the Summary for the iPhone, it shows Audio as only .16 GB - I have over 5 GB of songs, so what gives?
P.S. When I look at my Playlists most of the songs are greyed out. However, at the bottom of the list there is a cloud icon with a downward facing arrow. When I click on it each song starts to "load" and after a few minutes I have the songs back on in the list. I have to do this to all my playlists (I had over 100) in order to get access to all my songs. Then I did a sync and it happened again!
I use iCloud for documents and some other things (calendar, contact, etc.) but am not aware that I have anything music-wise in the cloud. Any thougnts?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

HT1688 Hi, just bought my daughter an Iphone 4s and I can't get it to let her on youtube, Facebook etc., keeps saying no internet connection. My husband and I have 3G smartphones and we can get on them on ours, so I'm not sure what I'm doing wrong. Also,

Hi, just bought my daughter an Iphone 4s and I can't get it to let her on youtube, Facebook etc., keeps saying no internet connection. My husband and I have 3G smartphones and we can get on them on ours, so I'm not sure what I'm doing wrong. Also, my other daughter has the same phone and has no trouble getting on these sites either. Any information to help is greatly appreciated. Thanks

Well, did you activate this new phone?

Forms Runtime Process and OC4J - Can I separate them?

Similar Messages

Maybe you are looking for