Forms6: Execute program in remote machine?
Hi,
I'm trying to execute a program in a remote machine. For exemple: I can use the function 'host ('notepad')' and the notepad executes in the machine running the .fmx. How can I execute a command in a remote machine running Unix? Is there a function?
I'm using Developer6 (forms).
Thanks.
You should be able to use <cfexecute...> to do this,
you will have to
make sure all the connections and permissions are set up.
Just remember that by default, at least on windows systems,
CF is
configured to only have access and permissions to the local
system, you
will need to modify this if it has not been done.
Similar Messages
-
Uninstall program on remote machine -
All,
I am trying to uninstall an application on a WYSE 32bit Windows Embedded device. I am unable to use WIn32_product and have to Win32Reg_AddRemovePrograms. I can query the device remotely fine with the following command
PS C:\> get-wmiobject -Class Win32Reg_AddRemovePrograms -ComputerName rob_wyse | where {$_.Displayname -like "blah*"} | select ProdID | fw
{548B747B-9B82-4FA7-91C8-15C8E8B053B1}
My issue is I want to capture the output of the ProdID into a variable and then use invoke-command to call MsiExec to uninstall the program. Below is what I have thus far..I was trying to use
the "outVariable" with hopes that I could use Invoke-Command -ComputerName rob_wyse "MsiExec.exe /norestart /q/x '$prid'" to run the uninstall with MSIEXEC.
What is the best way? Where am I going wrong?
get-wmiobject -OutVariable prdid -Class Win32Reg_AddRemovePrograms -ComputerName rob_wyse | where {$_.Displayname -like "Blah*"} | select ProdID | fw
Invoke-Command -ComputerName rob_wyse "MsiExec.exe /norestart /q/x '$prid'"
Thanks for the help.
Rob
Thank you for your help and time, Robert JaudonYou could try using psexec instead of invoke-command, but you wouldn't be able to execute the get-wmiobject command. Is powershell even installed on it?
In your script do this:
$prodid = (get-wmiobject -OutVariable prdid -Class Win32Reg_AddRemovePrograms -ComputerName rob_wyse | where {$_.Displayname -like "Blah*"} | select ProdID).ProdId
start-process psexec -argumentlist "-accepteula \\rob_wyse msiexec /X$ProdID /q /norestart" -PassThru
This assumes you've installed psexec to system32 and is in your path, otherwise add the full path and filename in place of just 'psexec'
Psexec info and download:
http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx
Good luck! -
How to execute program in remote server?
In my code I am executing a program that resides on another
server. But when I execute the program the server where the code is
resided runs the program and sucks up CPU.
How can I make it execute the program in the remote server? I
don't want it to just fetch the exe and run it locally. I want it
to execute the program IN the remote server, using ITS resources.
The remote server is a network share, \\server2 for example.
Any thoughts?You should be able to use <cfexecute...> to do this,
you will have to
make sure all the connections and permissions are set up.
Just remember that by default, at least on windows systems,
CF is
configured to only have access and permissions to the local
system, you
will need to modify this if it has not been done. -
Execution of a Java Class on a remote machine (RMI ??)
Hi guys,
I have an application in Java which, processes a local file and return some results. The local file is so huge (> 2Gb).
I need to process some distant (remote) files with this application. Firstly, I thought to make a FTP or HTTP connection to remote file and get an InputStream of that and give this InputStream as input to my application. But according to the size of file and transfer rate it's not a good solution may be a bad one.
So, I try to find a solution to send my application (Java Class) to remote machine and request its execution there. Like this, the application will execute locally on remote machine and then I just take the results via network.
I dont know exactly if it's possible or not. I think to RMI or COBRA techniques. But I dont know these methods at all. Does RMI let to send a java class (in fact some class which are dependent) to a remote machine and execute it there and take the results? If yes, I wonder what are the constraints and needs? specially in machine characteristics level?
Or any other solution to execute an Java code locally on a remote machine?
many thanks guys
HassanThanks Pantony,
It's what I want to do. But as I saw to use RMI, wa have to have the remote objects (methods) on host. Then we can call them remotely.
It's nice solution.
BUT, I wonder if there is not possibility to have the remotes method on host side, can we, for example, copy automatically an executable version of application to host and then call it remotely? then take the results saved in a file on host.
If yes, so why RMI? why the remote objects?
And how we can execute a *.JAR (java executable) on a remote machine?
Many thanks
Hassan -
How to use URL class to execute a java class/app on a remote machine?
I am a beginner in Java networking and have a question about URL programming.
How do I pass parameters to a java class/application over the web and then cause it to execute ? I then want to get the result back from the clas/app. The class/app resides on a remote machine and the protocol used is "http" protocol. OR all this is not possible through the URL and related classes ?How do I pass parameters to a java class/application over the web and then cause it to execute ? Using the HTTP protocl you can either perform a GET where the parameters are in the URL or a POST where the data is sent to the server with the request.
The server must be setup as a web server to execute code based ojn a HTTP request. Using a web server with a JSP which contains the code to execute is the simplest way to do this.
I then want to get the result back from the clas/app. The output of the JSP becomes in the data returned by the HTTP request.
I would suggest looking for example on google.
http://www.google.co.uk/search?q=java+http+request+tutorial
Another option is to use RMI. The integration is tighter but it does not use the HTTP protocol. -
How to execute a shell script which is present in remote machine using ODI
I have requirement of executing a batch (shell script) which is present in the remote machine.
i have an ODI agent in remote machine as well. I have created agent locally by using the remote machine IP and port.
I am able to test the agent successfully. But when i am executing the package using that agent it is failing with the following error
errorODI-1226: Step Execution of the Scenario REMOTE_DEMO version 001 fails after 1 attempt(s).
ODI-1241: Oracle Data Integrator tool execution fails.
Caused By: oracle.odi.runtime.agent.invocation.InvocationException: HTTP/1.1 500 ODI-1423: Warning connecting to Agent localagent: work repository WORKREP1 is not bound to the master
My Work Repository Name is : WORKREP1
Remote Work Repository Name is:WORKREP_LOCAL.
Could anyone please help me regarding this.
I can't download shell script and run it locally this needs to be run on that remote machine only.
Thanks
senthilkumarThis is the code.
1. we can declare types dynamically
2. Internal table dynamically
3. Select querry dynamically
just copy paste this code
Here is the code for your question
DATA:v_fieldname
TYPE fieldname,
l_PROG TYPE string,
v_mess TYPE string,
l_sid TYPE string,
wa_ddfields TYPE dntab.
DATA i_tab TYPE STANDARD TABLE OF string.
DATA:l_str TYPE string,
l_str1 TYPE string.
PARAMETERS matnr type marc-matnr.
end-of-SELECTION.
*build the subroutine pool
APPEND 'PROGRAM subpool.' TO i_tab.
APPEND `LOAD-OF-PROGRAM.` TO i_tab.
APPEND `DATA i_tab1 TYPE TABLE OF vbak.` TO i_tab.
APPEND `DATA l_rows TYPE i.` TO i_tab.
APPEND `select * into table i_tab1 from vbak.` To i_tab.
append 'DESCRIBE TABLE i_tab1 LINES l_rows.' to i_tab.
append 'Write : l_rows .' to i_tab.
GENERATE SUBROUTINE POOL i_tab NAME l_PROG
MESSAGE v_mess
SHORTDUMP-ID l_sid.
IF sy-subrc = 0.
PERFORM ('LOOP_AT_TAB') IN PROGRAM (l_PROG) IF FOUND.
ELSEIF sy-subrc = 4.
MESSAGE v_mess TYPE 'I'.
ELSEIF sy-subrc = 8.
MESSAGE l_sid TYPE 'I'.
ENDIF.
Edited by: vijay wankhade on Jan 1, 2009 5:34 PM
Edited by: vijay wankhade on Jan 1, 2009 5:34 PM -
Best method to execute a command on a remote machine?
I am currently using runtime.exec to execute commands on the machine where my java gui is running. What I would like to do is to execute the programs on a remote networked machine.
What should I be looking at? creating sockets, using rmi?
eventually it would be good to utilise ssh for the connection.
Any help is much appreciated.haven't really looked at this properly, was really after some advice on what methods would be useful.....
I can see that a telnet type solution can work... need to look further at rmi i think -
Program to open file in remote machine
Hi,
i want to write a program in which i can access a file in another system.
But the catch here is that the other system is using password to login to the system.
How i can provide password through my Java Program to access to other machine
~AmanCan you just send me the code how to read file from Shared folder/drive through java program?
e.g ="\\mcno-pc180\shared\HelloWorld.txt". I am able to access file HelloWorld.txt from my machine which is placed in shared folder path "\\mcno-pc180\shared\".
Regards
SPulluri
Share the folder/drive which you want to access on the remote machine then your application can access it.
Try to use the user which has already rights of reading/writing to that machine then the security dialog will not appear. -
Creating an executable program to control a machine
Hello
I've created an executable program under Labview that I want to install
on a computer without Labview to control a machine. On the second
machine I have just installed Labview runtime, driver for measurecard
(ni) and daq.
How can I save this application as an exe file, or as an install or
setup file? How can I put the library, dll-files and vi-files in the
exe-file?
FahriTo create an .exe, you need the application builder. It is included with the Professional versions of LabVIEW or you can purchase it separately as an add-on. I think the current price is U$995. The app builder inlcudes an installer that you can use to package the .exe and any support files that you might need.
-
How to run executable jar on client machine remotely?
Hi,
I have developed PHP web application that uses Java in the background. The problem that I want to solve is to start Java application (executable jar) on client machine.
Is there any idea how to solve this problem?
Zoranfound it:
in the Group Policy Management Editor go to Computer Configuration > Policies > Administrative Templates > System > Logon > Run these programs at user logon, and add the path (on the local computer) to the script to be run when any user logs
in. Powershell scripts need to be called from a .vbs script like this in order to prevent window popup:
Dim objShell
Dim cmd
Set objShell = CreateObject("Wscript.Shell")
cmd = "C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -nologo -noProfile -NonInteractive -ExecutionPolicy bypass -File c:\mypowershellscript.ps1"
objShell.Run cmd,0
As for distributing the scripts, that's a work in progress... GPP? -
Psexec shows Access denied when i execute a .exe file on a remote machine
Hi All,
I am using Psexec application to run exe on multiple remote machines in the domain. When i run the the .EXE i get the error message saying access is denied.
I am running this script against agents in a list.
Below is the script i am running in the batch:
"C:\Windows\system32\PsExec.exe" @C:\Test.txt cmd
1. I am first connecting to the cmd of the remote computer and it connects successfully.
2. When i enter the .exe file location on the command prompt (which is also in a shared drive but in the same domain).
3. I ran the batch file as Run as administrator
4. I am itself a member of the Domain admins and Administrators group of the domain.
5. Turned off firewall on both sides.
6. Turned off UAC fully as per the below MS article - http://technet.microsoft.com/en-us/library/cc709691(v=ws.10).aspx
7. Pressed shift and right click so i will get the Run as option and mentioned different domain admins user account and password.
Below is the screenshot for your reference:
Restated both the machines after doing these changes. But still the same issue.
But still i get access is denied. Can anyone please help.
Gautam.75801Few days back when i used to run the same task in this Access is denied mode its self. My destination server used to give a Audit failure event log as below.
Now a days this event log does not come.
Can this help for analysis.
Subject:
Security ID:
Domain name\My username
Account Name:
Gautamr
Account Domain:
My Domain
Logon ID:
0x234992
Object:
Object Server:
Security
Object Type:
File
Object Name:
C:\Windows\System32\eventvwr.msc
Handle ID:
0x0
Process Information:
Process ID:
0x17e0
Process Name:
C:\Windows\System32\mmc.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
SYNCHRONIZE
WriteData (or AddFile)
AppendData (or AddSubdirectory or CreatePipeInstance)
WriteEA
ReadAttributes
WriteAttributes
Access Reasons:
READ_CONTROL:
Granted by
D:(A;;0x1200a9;;;BA)
SYNCHRONIZE:
Granted by
D:(A;;0x1200a9;;;BA)
WriteData (or AddFile):
Not granted
AppendData (or AddSubdirectory or CreatePipeInstance):
Not granted
WriteEA:
Not granted
ReadAttributes:
Granted by ACE on parent folder
D:(A;;0x1301bf;;;BA)
WriteAttributes:
Not granted
Access Mask:
0x120196
Privileges Used for Access Check:
Restricted SID Count:
0
Gautam.75801 -
Any suggestions?
However, I can use scp to copy files out from my iMac (10.6.8) .
I can ssh into the iMac OK.
I created a .profile in my iMac home directory with the single line "export TERM=xterm-color".
This makes a difference to how scp behaves when attempting to copy into the iMac, but it still fails.
Thanks in advance for any help. Peter R
Here is the scp debug output (on the remote machine that I'm copying a file from, to the iMac):
===
Executing: program /usr/bin/ssh host molika.ucsd.edu, user prowat, command scp -v -t Desktop/FromPelican/Outs201201.pdf
Sun_SSH_1.1.3, SSH protocols 1.5/2.0, OpenSSL 0x0090704f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to molika.ucsd.edu [137.110.243.133] port 22.
debug1: Connection established.
debug1: identity file /home/nona/.ssh/identity type -1
debug1: identity file /home/nona/.ssh/id_rsa type -1
debug1: identity file /home/nona/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_5.2
debug1: match: OpenSSH_5.2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-Sun_SSH_1.1.3
debug1: use_engine is 'yes'
debug1: pkcs11 engine initialized, now setting it as default for RSA, DSA, and symmetric ciphers
debug1: pkcs11 engine initialization complete
debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible
Unknown code 0
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5 none
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: Peer sent proposed langtags, ctos:
debug1: Peer sent proposed langtags, stoc:
debug1: We proposed langtags, ctos: i-default
debug1: We proposed langtags, stoc: i-default
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 124/256
debug1: bits set: 1007/2048
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'molika.ucsd.edu' is known and matches the RSA host key.
debug1: Found key in /home/nona/.ssh/known_hosts:1
debug1: bits set: 1043/2048
debug1: ssh_rsa_verify: signature correct
debug1: newkeys: mode 1
debug1: set_newkeys: setting new keys for 'out' mode
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: set_newkeys: setting new keys for 'in' mode
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: Authentications that can continue: publickey,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Trying private key: /home/nona/.ssh/identity
debug1: Trying private key: /home/nona/.ssh/id_rsa
debug1: Trying private key: /home/nona/.ssh/id_dsa
debug1: Next authentication method: keyboard-interactive
*** Password requested & supplied
debug1: Authentication succeeded (keyboard-interactive)
debug1: fd 5 setting O_NONBLOCK
debug1: fd 6 setting O_NONBLOCK
debug1: fd 7 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug1: send channel open 0
debug1: Entering interactive session.
debug1: ssh_session2_setup: id 0
debug1: channel request 0: env
debug1: Sending command: scp -v -t Desktop/FromPelican/Outs201201.pdf
debug1: channel request 0: exec
debug1: channel 0: open confirm rwindow 0 rmax 32768
~
debug1: channel 0: read<=0 rfd 5 len 0
debug1: channel 0: read failed
debug1: channel 0: close_read
debug1: channel 0: input open -> drain
debug1: channel 0: ibuf empty
debug1: channel 0: send eof
debug1: channel 0: input drain -> closed
debug1: channel 0: write failed
debug1: channel 0: close_write
debug1: channel 0: output open -> closed
debug1: channel 0: rcvd eof
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: channel 0: rcvd close
debug1: channel 0: almost dead
debug1: channel 0: gc: notify user
debug1: channel 0: gc: user detached
debug1: channel 0: send close
debug1: channel 0: is dead
debug1: channel 0: garbage collecting
debug1: channel_free: channel 0: client-session, nchannels 1
debug1: fd 0 clearing O_NONBLOCK
debug1: fd 1 clearing O_NONBLOCK
debug1: fd 2 clearing O_NONBLOCK
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.9 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
debug1: Exit status 0On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R -
Update-Help error when console application is run in remote machine via PS remoting
Hello,
When I execute a particular console application in a remote machine via PS remoting, I get an error related to update-help. When I execute it directly on the remote machine, it works...
My code:
$credential = Get-Credential -Credential "DomainName\AccountName"
$session = New-PSSession -ComputerName "MachineName" -Authentication Credssp -Credential $credential;
Invoke-Command -session $session -ScriptBlock {
try{
cd <network share location>
.\theConsoleApp.exe | Out-File C:\console-output.txt
$error | Out-File C:\console-error-output.txt
$exitCode
} catch {
throw $error
Error seen in the console:
NetNat, PcsvDevice, PSDesiredStateConfiguration, SoftwareInventoryLogging, StartScreen, TLS, WindowsSearch' with UI culture(s) {en-US} : Unable to retrieve the HelpInfo XML file for
UI culture en-US. Make sure the HelpInfoUri property in the module manifest is valid or check your network connection and then try the command again.
$error variable from above:
Errored out (exit code 1603) with error message: ErrorId 10010: Xpatch threw an unexpected exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
I’ve tried
two different user accounts
multiple file share locations
different OSs
different target servers
but have not determined the cause of the error.
I would appreciate any help on this.
-Rohan.Clearly the remote EXE cannot run in that context. YOU should not run that program remotely.
I suspect there is also information you are not giving to us.
¯\_(ツ)_/¯ -
How to login to remote machine using SSH?
Hi,
I have a requirement where in I am required to connect to a remote machine using SSH and execute some commands, say a tail -100 on some file over there and pull back output data from the remote machine.
I know we can use sockets to connect to remote machines and Runtime.exec to execute external commands. But I am unable to tie together the two of these to achieve whatever I want to do.
Is it possible to somehow connect w/o using a custom server socket? The problem is that there is no concrete list of servers to connect to. It will be decided by the user. So I will not be able to install a server socket on each and every machine.
Any help would be most appreciated. Thanks a lot.
With regards,
GaneshHi,
I am writing a java program that will try to use a SSH client to connect to a remote machine. I do not want to log into every single remote machine to moitor stuff over there.
My plan goes like this:
Have a web application that can connect to a DB for all information regarding remote servers to be monitored.
Based on user selection of a particular server, use data from the DB to connect to the particular remote server and pull in some data.
Hope I am clear enough now. Thanks a lot.
Ganesh -
Not able to access database from a remote machine using SQL Server Management Studio
Hi,
I have a DB_BOX with SQL Server 2008 R2 installed. I can access the databases on the local machine using SQL Server Management Studio but it is not accessible from other machines, though the machines are in same domain.
I have remote enabled on SQL Server box, TCP enabled, firewall off. I checked with IP Address too, all SQL Server services are running.
The SQL Server log shows the message
The requested service has been stopped or disabled and is unavailable at this time. The connection has been closed.
I get the below message in SSMS from remote machine.
Details of error message are
===================================
Cannot connect to DB_BOX.
===================================
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=64&LinkId=20476
Server Name: DB_BOX
Error Number: 64
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()Sorry, missed the message from the errorlog in the original post. You shouldn't have included that big .Net dump that hid the important facts. :-)
My first Google attempt on that message (which I have never seen before) suggests that the TCP Enpoint is stopped, so try this:
ALTER ENDPOINT [TSQL Default TCP]
STATE=STARTED;
Erland Sommarskog, SQL Server MVP, [email protected]
This solves the problem. Thanks...
Maybe you are looking for
-
I thought to create a text wrap you simply created a polygonal shape, selected it, and chose "Text Wrap" from the Options menu. In a new draw document, I am creating a text frame, filling it with text, creating a polygon, and with it selected choosin
-
I have a disc for LR 2.0 and I am trying to install it onto my Mac Book Pro running 10.8.5. I have tried three times and the installation has failed with a message saying contact the manufacturer. I have managed to install Lightroom 1.0 from disc a
-
How to payment the vendor against consignment PO
HELLO EXPERTS, Can anybody help me how to PAYMENT my vendor against consignment PO. Because when i m doing a consignment PO,it is not taking any price ,than i go for GR and MIRO. but in MIRO ,in PO purchase order reference when i give purchase orde
-
I have imported both ACC and MPEG files into my Itunes music library. On the ACC tunes I can edit information through Get Info command. On the MPEG tunes I cannot edit the information through Get Info command as all entries are greyed out. Any ideas?
-
I want a PPT for how user run their reports on SAP BW
Hai guys, For our end-users we need one slide that gives them some hints/tips on how they should run the reports for best performance (e.g. extract as few records as possible). I know there is some SAP material in relation to this on sdn.sap.com