Formulas - Finding where used in a report

Does anyone know of a way to find where a formula is used within a report?
Including other formulas.

when your in the report designed you can export the report to report definition.
you can see everything in the report.

Similar Messages

How to find where used for PDF forms

Hello Everyone,
I have a small issue. I want to find the where used list for a PDF form SD_INVOICE_FORM01. Just want to see the driver program which is calling this PDF form.
Can some one help me in this regard?
Quick response would be appriciated. Thanks in Advance!!!

Hi,
You can see the driver program in Tnapr table.
Give the FORM name in the selection criteria. You will get the driver program details.
If you have the FM name generated,goto se37 and check where used list there.( It is useful only if the FM is used by its name in the driver program.)
Regards

To find Where-Used of ODS Active table

Dear Experts,
I am having an ODS for which I wish to know wherever the active table is used as reference. It has been used in many places in ABAP routines of transformations. I wish to know wherever the table is included.
I checked in SE11 for where used list with all fields in table included option. It is giving only the table structure and nothing else.
Can anyone help on this since we want to calculate the impact of this ODS in report level.
Thanks,
Rajarathnam.S

Dear Raja,
Thanks for the information. The code is throwing dump on execution possibly because the table structures are changed in new releases ( I am not sure of this).
But I was able to get the necessary information from the tables used in the ABAP code by manually using SE11 (RSTRAN and RSAABAP)
I am closing the question.
Thanks,
Rajarathnam.S
Edited by: rajarathnam S on Jan 15, 2010 8:29 AM

Where do we specify Report category in HR Adhoc query

Hi All.
We have a standard query which shows a selection screen which is different in Production. When I went into the program behind the query and saw the report category, it is different in both the environments.
I am not able to find where do we specify report category in the HR adhoc query.
Can anyone please guide?
Also, how is this possible that a standard report has different report category in Development and production env. ?
Any help would be appreciated.
Aishi

Hi,
There is no place in query, to maintain report category. Whenever an query is created, this table gets updated with default report category depending upon the LDB used. Now if you want to change this default screen to some other screen, then this is the only table where you can change the report category for that query or program.
According to me, you have to maintain this table only, if you want different report category, since there is no place in query where you can do this.
Hope this helps.
Thanks,
Sarika.

How to find u0091Where used list of BSP Applicationu0092?

Hi,
In standard, one BSP application is calling another BSP application by hard coded in application.
I want find a where used list of a BSP application.
How to find Where used list of BSP Application?
Regards,
...Naddy

Hi Naddy,
there is a way to find such hard coded things as long as they are really written as literal in the coding. So far i havn't used it on BSP but it's just a token search.
You can use the code inspector for such things (TCode SCI). You define an object list. Therefore you have to use the static list (dynamic won't work) e.g. for all objects in a package. The ugly thing is that sap has built a filter in SCI that you cannot run it on their standard objects (no comment on that). So you get always 0 objects on sap packages. But you can debug into SCI and set a break point on statement 'SELECT'. One of the selects gets the objects from repository. In this statement sap hands select options to exclude SAP objects. If you change the values you can get these objects in the list.
Then you run a search on these objects to find the string you look for.
Ok that's not very comfortable but still faster than checking dozens of objects by hand.
Best regards
Roman

Logo - Where used list

The logo is uploaded to Document server and is used in many sapScripts and forms. Business wants to know all the forms where this logo is used. I could not find where used option . Is there anyway we can find the list of forms ??
Will appreciate any inputs or suggestions.
Thanks,

The only way I see is to create a "little" program:
- sapscripts are stored in STXH (header) and STXL (detail) tables. Key is tdobject = 'FORM', tdid = 'TXT' and tdname = form_name.
You must use READ_TEXT function module to read STXL table, then look for BITMAP command (and other possible commands for graphics)
- smart forms are stored in a more complex way (clustered table, and data is made of a hierarchy of nodes), so I advise you to use SAP "APIs" to get the smart form as an XML, and you'll have to look for <sf:graphic> nodes (for this last part, I let you do the program) :
DATA : sform TYPE REF TO cl_ssf_fb_smart_form,
      l_formname TYPE tdsfname.
data: g_ixml               type ref to if_ixml,
      xml_document         type ref to if_ixml_document.
l_formname = 'ZZYSRO'.
CREATE OBJECT sform.
sform->load( EXPORTING im_formname = l_formname ).
g_ixml = cl_ixml=>create( ).
xml_document = g_ixml->create_document( ).
call method sform->xml_download
              exporting parent   = xml_document
              changing document = xml_document.
* Here xml_document may be scanned using an iterator (see
*http://help.sap.com/saphelp_nw2004s/helpdata/en/86/8280e112d511d5991b00508b6b8b11/frameset.htm)
data L_xstring type xstring.
data L_string type string.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
    document      = xml_document
    pretty_print        = 'X'
IMPORTING
    xml_as_string = l_xstring
EXCEPTIONS
    OTHERS        = 2.
CALL FUNCTION 'ECATT_CONV_XSTRING_TO_STRING'
    EXPORTING
      im_xstring = l_xstring
      im_encoding = 'UTF-8'
    IMPORTING
      ex_string = l_string.
* Here l_string contains the smart form in XML string

Summary field of subreport used in main report formula calculation

I have a summary field in a subreport that I want to use in a calculation of a percentage using a second summary field in the main report as the denominator. How do I do this in a new formula?

Thank You Ian Waterman,...
Couple of questions:
Where you say "... in subreport
@ eval
whileprinting records;
shared number x:=your summary
Am I correct that this is to be a new formula created in the subreport design?
What should I put for the "x" in the formula?
Should the "your summary" be: "DistinctCount of Activated_Survey.Seq.Incident" which I have showing in the Report Footer of the subreport?
Where in the subreport should I place the formula? Can it be hidden?
Where you say "In subreport header..."
@reset
whileprintingrecords;
shared number x:=0
Am I correct that this is to be a new formula created in the subreport design?
What should I put for the "x" in the formula?
Where in the subreport should I place the formula? Can it also be hidden?
Where you say "In the main report in section after subreport..."
I have the subreport sitting up in the main Report Header as I only want the subreport summary field showing.
In the subreport, I have the Report Header and Details section hidden.
@calc
whileprintingrecords;
(shared number x / main report summary) * 100
Am I correct that this is to be a new formula in the main report?
However, what I need to have happen is that the main report summary field of: "Count of Answered_Survey.Seq.Incident" needs to be divided by the subreport summary field of "DistinctCount of Activated_Survey.Seq.Incident" * 100.
What do I modify in the formula?
Thanks.

How do I find where a Procedure is used ?

I have a stored procedure, not a part of a form or report. I need to find where in my system this is used. Is there a utility that will do this ??
Thanks

I guess DBA_DEPENDENCIES should be able to help you.
How to map package call hierarchy

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

How to find where the below sql is used in database

Hi all,
I am tring to find the below SQL in our data base where it is used?
I had done the checking in all reports manually, But have no luck.
But i am sure that the below sql is in our data base and having some issue on it.
Can any one please let me know how to find where the below query is used in our database? I mean in packages/ triggers/ procedures or any where in our database
Please find the query
select count(sh.shipment_gid) from SHIPMENT sh, SHIPMENT_TYPE stp, LOCATION ld where (sh.shipment_gid in (select sstop.shipment_gid from SHIPMENT_STOP sstop where (sstop.appointment_delivery > trunc(TO_DATE(:1, :2), :3)) and (sstop.appointment_delivery is not null))) and (sh.is_to_be_held=:"SYS_B_0") and (sh.domain_name=:4) and (sh.insurance_policy_number like :"SYS_B_1") and (sh.perspective=:"SYS_B_2") and (sh.shipment_type_gid=stp.shipment_type_gid) and (sh.dest_location_gid=ld.location_gid(+)) and (stp.shipment_type_xid!=:5) order by ld.location_name, sh.start_time
Regards,
Dpk

There is video demonstration how to import from data dictionary.
After import you can select from the main menu: View->DDL File Editor menu item to open the DDL dialog and then click on "Generate" button on the dialog. When the DDL is generated you can search in it using "Find" button.
Ivan

Report name for services where used in task lists

plz let me know report name for services where used in task lists.

Hello Sairam,
I am abit confused. Are you looking for report to find where the task list is used ? You can find all the available reports in The menu path Logistics -> Production -> Master Data -> Routings -> Reporting.
If you want a specific one then please provide more details
Thanks
Amber

Function Module where-used list does not find update rule programs

We have function modules called in update rules. The where-used list in the function builder does not find the update rule programs.
For example, function DATE_GET_WEEK is called in an update rule to InfoCube YCUBE001. The activated program name for this update rule is GP3PWI6PKM5Y3K75A370DIS8I77. When I goto SE37, enter the function DATE_GET_WEEK, click the where-used button, check the programs option and search. The system does not find the program GP3PWI6PKM5Y3K75A370DIS8I77.
Without this search capability it is difficult to do an impact analysis of changing function modules. Does anyone know of a solution?

hi,
i think the reason is the code of update rules' generated program are stored line by line in table(rsaabap), update rules program itself stored in table rsupdrout, link with field codeid, another useful table is rsupdinfo which store infocube, infosource related. other info may stored in some other rs* and rsa* tables.
try to create following program in your system, and run, type in the function module name, and will display out the update rules program id, with additional useful info : which infoprovider, infosource, and detail info of the routine and infoobject in the update rule that using that function module. you may modify the program to have better display out list.
hope this helps.
REPORT Z_FM_UPDRUL_WHEREUSED.
data : lv_sfm,
       lv_line type string,
       lv_where type string.
tables : rsaabap,RSUPDROUT,rsupdinfo.
select-options:
s_fm for rsaabap-LINE.
start-of-selection.
loop at s_fm.
    concatenate s_fm-low ' ' into lv_sfm.
    concatenate '%' s_fm-low into lv_line.
    concatenate lv_line '%' into lv_line.
    write : / 'function module', 'update rule id', 'routine id', 'infoobject', 'infocube', 'infosource'.
    select * from rsaabap
    where line like lv_line and objvers = 'A'.
       select * from rsupdrout
       where codeid = rsaabap-codeid and objvers = 'A'.
         select single * from rsupdinfo
         where updid = rsupdrout-updid and objvers = 'A'.
           write: / lv_sfm, rsupdrout-updid, rsaabap-codeid,
                    rsupdrout-iciobjnm, rsupdinfo-infocube,
                    rsupdinfo-isource.
    endselect.
    endselect.
endloop.

How to find if one key figure is used in any report

Dear Experts ,
I have one key figure info object .I wanted to know how to find this key figure is used in which report .
As I know "where used list " but this will not help me .
Any suggestions please share .
Puru

Hi Puru,
Try following approach,
goto RSZELTTXT table and put your key figure name in the long text and click on execute. Get the list of all the ETULID's and go to table RSZCOMPDIR from this table for all the ETLUID's get all the list of COMPUID's and from COMPUID's you will be able to find all the reports from RSRREPDIR in which that key figure is getting used.
Regards,
Durgesh.

In the new Numbers, can I find and replace within formulas like I used to in Numbers'09?

I use Numbers with quite long formulas with reference to other tables. With Numbers'09, it was extremely useful to copy formulas and then use "find and replace" to change the terms within.
Did they remove this option? I don't seem to be able to do that with the new Version.
If it's still there, where do I find it?
If it's not there.... why would they remove it.
Thanks

Basically, I use it for payroll, taxes, and so on... I have one sheet per employee (which compiles their weekly payroll). I have then different sheets which makes the quarterly taxes calculation (state and federal taxes - 941, 940, W2, disability, UI, paystubs, tracks payments and deadlines, etc... ). It took me awhile to write all of the formulas, but now it does everything for me.
When I add an employee. I have to add a sheet, but also add a line in the calculation sheets. Because all the employee sheets are the same format, all I need to do (or used to now) was to copy the line above, and just change the reference name of the employee sheet within the formula (because there are several terms that are looked up, the reference name comes several time in the formula)... changing it manually is really annoying. What was taking me a minute or so, before, now takes me about 20 minutes. (between the different sheets, there are about between 75 to 100 changes in formulas per new employee - so the "find and replace" in formula only, was extremely useful).

I keep getting an error message that tells me the document i am trying to attach to an email is currently in use, that i need to close it, and retry. i can't find where it is in use, and i am unable to attach it to the email. what do i do?

I am trying to attach a document that was created on the same computer to an email. i continue to get an error message that indicates the document is in use, that i must close it, and retry. i can't find where it is in use. i have closed "word" which is the application it was created using. i have restarted the computer multiple times, no luck. what do i do, to reconcile this issue?

I responded to you here > https://discussions.apple.com/message/22264383#22264383
Please do not start duplicate topics. Thank you

Formulas - Finding where used in a report

Similar Messages

Maybe you are looking for