Forte compile error java source files must have a .java suffix

Hello Guru's,
I am using Forte for Java release 2.0 build 1160, and Java SDK 1.3.1.
When I try to compile a project in Forte I get the following error :
"fastjavac: java source files must have a .java suffix C:\Program"
I have looked at the source files and they do hav .java suffix!
If this is not the correct form can someone point me in the right direction. If this is a correct forum then help is very much appreciated.
Cheers...Harki

Hi,
Try to compile like this:
javac yourfile.java
Hope this helps you.
Cheers.....Dinesh

Similar Messages

Erro in bursting ZIP file must have at least one entry

Hi All ,
i am using bursting utility for xmlp report ,but getting the following error
--Exception
ZIP file must have at least one entry
java.util.zip.ZipException: ZIP file must have at least one entry
     at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:304)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
i have no clue y this error is coming ,any hint would be very helpful,
Thanks in advance
thanks
Pratap

Hi All
i got resolved this error (Erro in bursting ZIP file must have at least one entry) ,was doing very silly mistake i was using the template name instead of Data Definition code name in location string
location= ' '
so the ZIP file error is removed ,now getting one more error after this ,which i am not able to under stand
--Exception
/tmp/011211_023243126/xdo1_164902_2.pdf (No such file or directory)
java.io.FileNotFoundException: /tmp/011211_023243126/xdo1_164902_2.pdf (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at java.io.FileInputStream.<init>(FileInputStream.java:66)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:532)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:299)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Please help me on this
Thanks
Pratap

Error: A file found in a source-path must have the same package structure

I use Adobe Flex Compiler (mxmlc) Version 4.1.0 build 16032,I have a file,named CustomGraphContainerController.as,it's directory is c:\controllers,and the GCController.as file is under the same directory,CustomGraphContainerController.as file like follows
package controllers{
import ui.GraphControlContainer;
public class CustomGraphContainerController extends GCController {
public function CustomGraphContainerController(a_graphControlContainer:GraphControlContainer) {
super(a_graphControlContainer);
Then I want to use mxmlc command to compile it,like follows:
C:\>mxmlc c:\controllers\CustomGraphContainerController.as
But it raise compile errors,like follows:
Loading configuration file C:\sdk\frameworks\flex-config.xml
C:\controllers\GCController.as: Error: A file found in a source-path must have the same package structure '', as the definition's package, 'controllers'.
I don't know how to compile the as file with package controllers? Where is wrong? How to use mxmlc to compile it?
Thanks

HI,
You should have one main application class to compile this as code to swf.. So that main application path should be in your proper package structure.. then you can compile you app and as files also...
Thanks
Ram..

Do we have to separate java source files and class files after compiled..

Hi,
I really confussed with this:
I have compiled java source files into a package and tried to use but the classes can not be found. Should I separate class and source files after compiled with packages names. I hope you understand what i mean.
Thank you
So Jag

You can choose to separate the source files or not. It sounds like your problem has to do with Classpath and packages.
If the file c:\base\compute\engine\mysourcefile.java starts with the statement "package engine;" then the fully qualified name of the class is is engine.mysourcefile. If the file c:\base\compute\client\mysourcefile.java starts with the statement "package client;" then its fully qualified name is client.mysourcefile.
In your source files, whenever you refer to a class from another class, the compiler needs the fully qualified class name. You can either import the class or use the fully qualified name. In order for the compiler to find the class, the c:\base\compute directory must be in the Classpath (assuming the package definitions from above).
Finally, to launch an application given the above, the command would be "java client.mysourcefile" assuming the main method is in client.mysourcefile.

Error while compiling the ejb java source files.................

hi,
i am new to ejb.......
i have got error while compiling the ejb java source files............
while compiling..........of this three i ahve got err in ejb home interface....
ejb remote interface - succeded
ejb bean class - succeded
ejb home interface - error
the error..............is in the return type of the ejb create() method in ejb home interface(which is the type of remote interface).
the error message is cannot resolve symbol

Hi,
thanks for ur reply .....
i have done enough searching in all sites including sun forum but in vain
i have pasted my error below...
can u plz predict anything from it
D:\>path=%path%;c:\j2sdk1.4.2_12\bin;
D:\>set classpath=%classpath%;d:\Sun\AppServer\lib\j2ee.jar;
D:\>javac d:\Librarys\Library.java
D:\>javac d:\Librarys\LibraryBean.java
D:\>javac d:\Librarys\LibraryHome.java
d:\Librarys\LibraryHome.java:8: cannot resolve symbol
symbol : class Library
location: interface Librarys.LibraryHome
public Library create(String id, String name, String address, String phoneNo
) throws RemoteException, CreateException;
^
d:\Librarys\LibraryHome.java:9: cannot resolve symbol
symbol : class Library
location: interface Librarys.LibraryHome
public Library findByPrimaryKey(String id) throws FinderException, RemoteExc
eption;
^
2 errors
thanks in advance...

Bursting Error : ZIP file must have at least one entry

Hai All,
I am trying to Burst report in 11.5.10.2 instance. When tried bursting it the it got the following error.
XML Publisher: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
Current system time is 04-JUN-2009 12:40:16
XML/BI Publisher Version : 5.6.3
Request ID: 387463
All Parameters: ReportRequestID=387460:DebugFlag=Y
Report Req ID: 387460
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:ERP
Preparing parameters
null output =/d02/appluat/uatcomn/admin/out/UAT_erp/o387463.out
inputfilename =/d02/appluat/uatcomn/admin/out/UAT_erp/o387460.out
Data XML File:/d02/appluat/uatcomn/admin/out/UAT_erp/o387460.out
Set Bursting parameters..
Temp. Directory:/tmp
[060409_124018651][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[060409_124018653][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=387460, user-variable:cp:language=en, user-variable:cp:responsibility=50352, user-variable.OA_MEDIA=http://erp.adgs.ae:8030/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=387460, user-variable:cp:locale=en-US, user-variable:cp:user=GVU, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=387463, user-variable:cp:org_id=103, user-variable:cp:reportdescription=Pension Fund}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
--Exception
ZIP file must have at least one entry
java.util.zip.ZipException: ZIP file must have at least one entry
     at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:292)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Can anyone please help me on this..
Regards

Pl help me is there any way to overcome this error, when supplier email address is present then , bursting file works fine, if supplier address is null , then it is giving me error , please find the error also.........
Bursting XML File ...........
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/XXDBD_POPRPOP_SA/LIST_G_INIT_INFO/G_INIT_INFO/LIST_G_HEADERS/G_HEADERS">
<xapi:delivery>
<xapi:email server="mailgate.XXX.com" port="25" from="[email protected]">
<xapi:message id="emailpo" to="${CP_VENDOR_EMAIL}" cc="[email protected],[email protected]" attachment="true"
subject="Purchase Order No: ${POH_PO_NUM}">
Please find attached PO ${POH_PO_NUM}.
Regards,
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="Purchase Order ${POH_PO_NUM}" output-type="pdf" delivery="emailpo">
<xapi:template type="rtf" location="xdo://XXDBDPO.XXDBD_POXPRPOP_SA1.en.US/?getSource=true" filter=".//G_HEADERS[CP_VENDOR_EMAIL !='']"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
ERROR Generated from bursting file ............Pl help me...........its urgent .............
XML/BI Publisher Version : 5.6.3
Updating request description
Retrieving XML request information
Preparing parameters
Set Bursting parameters..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=529232, user-variable:cp:language=en, user-variable:cp:responsibility=20707, user-variable.OA_MEDIA=http://usncx054.XXX.com:8015/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=N, user-variable:cp:parent_request_id=529232, user-variable:cp:locale=en-US, user-variable:cp:user=RAJULAT, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=529233, user-variable:cp:org_id=84, user-variable:cp:reportdescription=DBD Printed Purchase Order Report English, user-variable:cp:Dummy for Data Security=Y}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
--Exception
ZIP file must have at least one entry
java.util.zip.ZipException: ZIP file must have at least one entry
at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:304)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
Thanks

Error in compiling the ejb source files......

hi all,
it makes me to go mad...
i have got error sometimes while compiling the ejb java source files and sometimes not...
i would appreciate anybody for helping me in this problem
i am using sun application server 8.1 and javac compiler
i have got the following error
D:\>path=%path%;c:\j2sdk1.4.2_12\bin;
D:\>set classpath=%classpath%;d:\Sun\AppServer\lib\j2ee.jar;
D:\>javac d:\Librarys\Library.java
D:\>javac d:\Librarys\LibraryBean.java
D:\>javac d:\Librarys\LibraryHome.java
d:\Librarys\LibraryHome.java:8: cannot resolve symbol
symbol : class Library
location: interface Librarys.LibraryHome
public Library create(String id, String name, String address, String phoneNo
) throws RemoteException, CreateException;
^
d:\Librarys\LibraryHome.java:9: cannot resolve symbol
symbol : class Library
location: interface Librarys.LibraryHome
public Library findByPrimaryKey(String id) throws FinderException, RemoteExc
eption;
^
2 errors
D:\>

hi,
thanks for ur reply
i haven't tried the thing given by you
i will reply u soon after trying out that
but when i compiled *.java instead of compiling individual files
everything go fine....

Error 5007: an actionscript file must have...

Hi all, I am new to AS3 and just ran in to this problem.
I am trying to have actionscript 3 and greensocks tweenlite change the alpha properties of another file on roll over.
I can do it using just pure actionscript 3; however when I try to use Tweenlite I run in to this error:
5007: An ActionScript file must have at least one externally visible definition
The code I have used is:
image = mc that has the rollover function added to it;
info = mc that has it's alpha set to 0 and I am trying to get it to tween to 1 in 0.5 seconds.
import com.greensock.*;
import com.greensock.easing.*;
image.addEventListener(MouseEvent.MOUSE_OVER, over);
image.addEventListener(MouseEvent.MOUSE_OUT, out);
function over(event:MouseEvent):void{
TweenLite.to(info, 0.5, {alpha:1});
function out(event:MouseEvent):void{
TweenLite.to(info, 0.5, {alpha:0});
What am I doing wrong?
Thanks in advanced!

Thanks Kglad =)
This advice is true.
I read about it on another forum but your advice would have helped me too

Redirecting java compilation errors to a file

Hi,
How do I redirect java compilation errors to a file while using a dos environment ? Help needed asap.
Gayathri

javac FileName.java 2> errorFileName

Error running batch files from java source file???

Dear Friends,
hi,
this is with response to a doubt i had earlier ,
i want to run batch files from the java source file ,i tried using this code (here batrun is the batch file name that contains commands to run other java files)
try
String [] command = {"c:\\vishal\\finalmain\\batrun"};
Runtime.getRuntime().exec(command);
catch(Exception e)
but i got the following error.
java.io.IOException: CreateProcess: gnagarrun error= 2
plz. help me, i tried all combination w/o success,
in anticipation(if possible give the code after testing)
Vishal.

hello there,
i solved the prob. by using
cmd /c start filename ,but i need to pass parameters ie
cmd /c start java "c:/vishal/runfile a b" where a and b are the parameters. but it is not accepting this in Runtime.getRuntime.exec(),
any solutions ?????????
regards,
Vishal

I reinstalled my OS as I do every year or so. when I install CS4 I do not have Premiere Pro Adobe Premiere Pro Error 1603. Error 1311.Source file not found: F:\Adobe CS4\payloads\AdobePremierePro4All\AdobePremierePro4All1.cab. Verify that the file exists

Error 1603. Error 1311.Source file not found: F:\Adobe CS4\payloads\AdobePremierePro4All\AdobePremierePro4All1.cab. Verify that the file exists and that you can access it.

And what exactly? You have not provided any system info or other details.
Mylenium

[solved] "Error - all files must have permissions of 644 or 755"

Hello,
when I try to update an AUR package, I get the error message:
Error - all files must have permissions of 644 or 755.
How can I find out which file in the tree is causing that problem?
And what is the cleanest way to change that? Change permissions via chmod in the pkg dir?
Last edited by Carl Karl (2015-04-02 07:55:56)

A right there! (I thought INSIDE the phg...) Thanks, solved.
Last edited by Carl Karl (2015-04-02 07:55:31)

Abount java source file name

Friends,
I am new in java... Kindly clarify my doubt...
when i create public class i have to give the class name as my file name. but if i create a default class
like
class SimpleClass
i need not give the exact class name as file name.
why?
sorry for my english...

Java source code files may contain one and only one top-level (that is, non-nested) public class declaration. The name of the public class must match the source file name.
The java language specification details this here:
http://java.sun.com/docs/books/jls/third_edition/html/packages.html#26783
Obviously if you were permitted more than one top-level class per compilation unit then I suspect you would into problems with access privileges.

Error 1308.Source file not found with 9.4.2 Admin Install point

I'm including as much information in this post as possible to help narrow down my problem, so if it's too wordy I appologize.
I've created an Admin install point for Acrobat 9 patching it up to Acrobat 9.4.2 using the following commands in a batch file:
D:
cd \Adobe\Acrobat\AcrobatPro9
md \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP /Liv D:\Adobe\Acrobat\AcrobatPro9AIP\install900.log /qn
cd \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd941_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install941.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I rename the folder "AcrobatPro9AIP" to reflect the current version (e.g. "Acrobat9.4.2"), copy the folder to my DFS, create an MST with the Customization Wizard, and then deploy with Group Policy.
Before I deploy I always run a few test installations on two Windows XP 32-bit machines, and two Windows 7 64-bit workstations. I've been using this method to build my install point for the last 5 Adobe patches without a problem, but suddenly with version 9.4.2 my test workstations pop up with the following error during the installation via the standard installation method "msiexec /i acropro.msi TRANSFORMS=acropro.mst":
I built my installation package for acrobat9.4.1, 9.4.0 and 9.3.3 exactly the same way and the installations did not have this error. The file in question "Adobe.Acrobat.Dependencies.manifest" does not exist in my 9.4.1, or 9.4.0 package folders, nor does it exist in the 9.4.2 folder. Any suggestions?

I am having the same problem, all the relevant info was already covered in the "thewaker" post above.   I too have made a script to make a Admin install with patches up to 9.4.2. The script worked for 9.3.3 but when I remade the AdobeAIP for 9.4.2, I too got this error when installing it, even manually. (Error 1308.Source file not found. Adobe.Acrobat.Dependencies.manifest ) Running on Windows 7 32bit.
Here is my Script.
C:
cd\AcroBatPro9
md \AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP /Liv c:\AcrobatPro9AIP\install900.log /qn
cd \AcrobatPro9AIP
start /wait msiexec /p c:\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I did notice though that the "thewaker" has added AcrobatUpd941_all_incr.msp to his script, which is a security update. Which may be "a" problem, but I don’t think this is related to the problem we are having.
Administrative deployment
Administration Installation Point (AIP) deployments must not apply a quarterly update AIP in which a security update was the most recently applied update. Because a quarterly update includes the changes implemented in all recent security updates, the quarterly update forcibly bypasses those updates entirely. To deploy a quarterly update from an AIP, create a AIP which includes only quarterly updates as follows:
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security)
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.2 (Quarterly)
    Unacceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security) -> 9.4.2 (Quarterly)
Anyway.. Any help with this would be helpful as I would like to deploy it soon.
Thanks.

Getting all the members (variables, methods AND method bodies) of a java source file

For a project I want to programmatically get access to the members of java source file (member variables, methods etc) as well as to the source code of those members. My question is what is the best method for this? So far I have found the following methods:
Use AST's provided by the Java Source API and Java Tree API, as discussed in the following posts:
http://today.java.net/pub/a/today/2008/04/10/source-code-analysis-using-java-6-compiler-apis.html
http://weblogs.java.net/blog/timboudreau/archive/2008/02/see_java_code_t.html
http://netbeans.dzone.com/announcements/new-class-visualization-module
This has the disadvantage that the classes actually have to be compilable. When I look at the Netbeans Navigator view however, it provides me with a nicely formatted UI list, regardless of the "compilable" state of the class.
Thus I started looking at how to do this... The answer appears to be through the use of tools such as JavaCC: https://javacc.dev.java.net/
ANTLR: http://www.antlr.org/
which are lexers and parsers of source code. However, since the Navigator panel already does this, couldn't I use part of this code to get me the list of variables and methods in a source file? Does the Navigator API help in this regard?
Another route seems to be through tools such as
BeautyJ: http://beautyj.berlios.de/
which run on top of JavaCC if I am correct, and which has the ability to provide a clean view on your java code (or an XML view). However, BeautyJ does not seem to be too actively developed, and is only j2se1.4 compatible.
I hope someone can shed a light on the best way to go about what I want to achieve. Somebody already doing this?
(I crossposted on the Netbeans forums too, hope this is OK...)

I'm currently developing a LaTeX editor(MDI) and I do the same thing, but I don't know what exactly do you need.

Forte compile error java source files must have a .java suffix

Similar Messages

Maybe you are looking for