How to avoid multiple messages in Moni

Hi all,
i am doing a Multiple Idoc to file scenario.
evryday 30000 Idoc will be sent . have to collect all the record in a single file.The scenario is working fine.
But its creating 30000 entries in moni...
is there any way to send all the Idocs or may be 1000 idocs at a time so that only 1 entry is there in MONI?
regrads
Biplab

Hi,
Collection of IDocs can be done with BPM and without BPM see the below links
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm -collecting IDocs without BPM Idoc - Multiple - interfaces - Idoc to multiple interfaces in XI
Please reward points if it helps
Thanks
Vikranth

Similar Messages

How to avoid the message in the dashboard report

Hi,
I am developing Dashboard reports(graphs) using WAD. Query and WAD are working fine. I need to put a variable for Calendar Month or Year in the graph .I am populating the Variable with default value initially and I am getting the correct result . But if I change the Variable value second time, I am getting a message (type I(information) ) in the same screen which says that 'You cannot change variable ZCALYEAR_WT01 for charact. 0CALYEAR during query navigation' . And below is the detailed information about the error message.
The Can be changed in query navigation property has been set for variable ZCALYEAR_WT01, characteristic 0CALYEAR. However, the variable is used in the query in such a way, that the system is unable to apply this change-option.
This can, for example, occur under the following conditions:
Characteristic 0CALYEAR is filtered by additional restrictions (the restrictions must be joined using an OR-connection)
A second characteristic, which is restricted by a variable, is compounded to charcteristic 0CALYEAR.
Variable ZCALYEAR_WT01 is a hierarchy node variable, but the hierarchy has not been determined uniquely.
A variable can be changed during query navigation only if it is used exclusively in a drilldown-characteristic, and there are no further restrictions to the characteristic other than this variable. There must be no additional characteristics with variables compounded to the characteristic you are working with. For variables for hierarchy nodes, the hierarchy must be determined uniquely and agree with the set display hierarchy.
Also, if the characteristic value is moved, for example (ZCALYEAR_WT01 - 1), the variable is no longer able to be changed when navigating queries.
System Response
The entry ZCALYEAR_WT01 Can be changed during query navigation is not applied.
Procedure
I checked the query definition and it is not having any offset or any other restrictions for Calendar Year
It is used for finding the total quantity by country for the year .Hence Quantity keyfigure is added in the Keyfigures and Country is in the Rows and Calendar Year is restricted with Variable in the global filter .There are no other fields and no other restrictions .
I am still trying to figure out why the warning apprears in the DashBoard. Since this Dashboard report will be used by the Power users and this warning message will be annoying to them .Hence I need to find how to avoid this message.
Kindly do let me if anyone has faced this and solved earlier.
Thanks for your time.
Thanks & Regards,
Raja

Hi Nick,
Thanks for your suggestion and it worked for me I added the 'System message' web item and set the visibility to 'Hidden' .Now I am not getting any message. Thank you for both.
Thanks & Regards,
Raja

How to transmit multiple messages over CAN

Hi All,
How to transmit multiple messages over CAN ? With all three messages i want to send the system time & date also.
How can i get the timestamp in DBL format (Since the timestamp in the input of ncWriteNetMult.vi is a DBL). If possible kindly share the code in Labview 7.1 also.
Thanks in advance.
J

The NI-CAN driver brings examples for nearly every use case. Driver version 2.4 or later has the Write multiple function to write multiple frames at ones.
There is an example available for LabVIEW, CVI and VC/VBasic called CAN Transmit multiple.
Also check the attached VI and the Can manual: http://www.ni.com/pdf/manuals/370289m.pdf
What do you mean by converting Timestamp to DBL? Timestamp contains all date and time information. You can convert it into string format as shown below and then use the relevant data from it by string operations.
Hope this solves your problem.
Shreyas Hebbare
Shreyas Technologies
India
Attachments:
Transmit Multipe Objects at Different Rates_LV80.vi ‏36 KB

How to avoide multiple duplicate entries in adress book?

How to avoide multiple duplicate entries in adress book? I can add the same contact name and number more than twice and the phone isn't warning me at all!!! I's quite a heck for me.

not possible from inside AB AFAIK. but you can do the following. in finder open the folder /users/username/library/application support/address book/metdata. switch to the list mode and sort by date modified. quicklook the vcards at the top to see which ones they are.

How to avoid multiple copies of data in page refresh

How to avoid multiple copies of data in page refresh

If you are talking about a page with an insert query, ignore the fact that it's a page refresh. It's just another way that someone can insert duplicate records. I like to handle this in my insert query.
insert into thetable
(f1, f2, etc)
select distinct
value1, value2, etc
from some_small_table
where you don't already have that record

How to avoid multiple listing for same artist?

How to avoid multiple listing for same artist?

Sounds like there might be blanks in the artist name.
For instance "Lou Reed" and "Lou Reed_" will not match.
(Pretend the underscore _ is a blank).
Select all the Lou Reed songs, Get Info, and type "Lou Reed" in the artist field. That should fix it.

How to avoid multiple users to access same tcode

Hi all,
Am creating one z tcode to display the material details for the particular reservation number. How can I avoid multiple users to access the same tcode simultaneously. If anybody works over that tcode then no other user should be able to access the same tcode until or unless the first user works over it.
Regards,
Ramya

HI,
you can even use import and export logic and check if user has entered the transaction ..
Regards,
Santosh
Message was edited by:
Santosh Kumar Patha

How to avoid multiple call to function:

In our datawarehouse we have a huge receipt row table where all metrics ar stored in the local currency. On top over that we have views which calculate metrics to the desired currency.
So basically all views looks like this
select geo_region,
product_group,
customer_group,
metric1 * (select get_exchange_rate(currency_id) from dual) metric1,
metric1 * (select get_exchange_rate(currency_id) from dual) metric2,
metric1 * (select get_exchange_rate(currency_id) from dual) metricx,
group by..
As we have about 20 metrics we notices that the function is called 20 times per row.
Is there really anyway to avoid that? Shouldn't it be it's just the exact same call with the same in-parameters over and over again.
We've tried with local sys_context and the performance is better but the call to the context is still performed 20 times. Any Ideas?

Can you avoid multiple function calls? Maybe, if as in your example all the function calls values are computing the same result. If they operate on different columns then you'll have to perform the function call anyway.
Either way you should be able to eliminate the (near as I can tell) pointless subquery from dual
You might be able to avoid the repeated function calls if the values are always the same. If every computation you could save the function call (and subquery!) by doing it once and then using assignments after the initial query using variables after the initial query, perhaps using NULL in the query as placeholders to select into a record - something like
select inital_region,
         product_group,
         customer_group,
         metric1 * exchange_rate(currency_id) metric1,
         null metric2,
v_metric2 := metric1;
...Message was edited by (fixed typo):
riedelme

How to avoid multiple votings?

Hello All. How can I avoid, that there are multiple votings from one person?

I think there is no option to avoid multiple votings. Adobe has not implemented this funktion.
Formstack is as alternative to Formcentral. The Fieldoption there is called - Unique.
Unique allows you to restrict submissions of the same value in this field. For example, you can allow only one submission for a particular email address or physical address.
That is the option i was looking too.
Formcentral is useless for me in this way.

How to avoid multiple LOGIN with same user in database.

Hi All,
Using database triggers how to control multiple logins of a pertiuclar user.
thanks in advance

Don't forget to activate the RESOURCE_LIMIT parameter, which default is FALSE :
alter system set RESOURCE_LIMIT = true;
Laurent, I had a similar problem some time ago : I didn't want to avoid multiple access, but only control who was doing what. That's because moving from Client/Server to Web the TERMINAL column in V$SESSION becomes useless.
I tried your solution, but I had to give up with it, because in my Forms9i application some forms call Reports, which generate a new session.
I decided to use DBMS_APPLICATION_INFO, and this is satisfactory for my requirements, but I'm interested to discover other solutions.
P.S. with my solution I'm able to limit accesses, because in the CLIENT_INFO string I put, among other things, the
application user, so I can control if an user is already connected. The problem is that existing applications have to be modified .....:-(

How to avoid multiple if else using design patterns.

Hi,
Which design patterns is used to avoid lot of if else in our code . Say for example if the user press 1 the out put should be one, if he press 2 it should be two like this upto 10. So we need to include lot of if-else part. How to avoid the multiple if else using design patter for this scenario. I can't find the solution for this problem can you guys help me?.

I'm too lazy to read a whole text book, but the first google link provides a code sample which made me laugh.
http://www.refactoring.com/catalog/replaceConditionalWithPolymorphism.html
double getSpeed() {
    switch (_type) {
      case EUROPEAN:
        return getBaseSpeed();
      case AFRICAN:
        return getBaseSpeed() - getLoadFactor() * _numberOfCoconuts;
      case NORWEGIAN_BLUE:
        return (_isNailed) ? 0 : getBaseSpeed(_voltage);
    throw new RuntimeException ("Should be unreachable");
}My implementation of The Bridge Over The Parrot Shop
package forums;
import java.util.Random;
abstract class Bird {
private static final Random random = new Random();
abstract double getAirSpeed();
public double getBaseSpeed() {
    return randomDouble(18.96);
protected static double randomDouble(double max) {
    return random.nextDouble() * max;
protected static int randomInt(int max) {
    return random.nextInt(max);
class EuropeanSwallow extends Bird {
double getAirSpeed() {
    return getBaseSpeed();
class AfricanSwallow extends Bird {
private int _numberOfCoconuts;
public AfricanSwallow() {
    this(randomInt(4));
public AfricanSwallow(int numberOfCoconuts) {
    _numberOfCoconuts = numberOfCoconuts;
double getAirSpeed() {
    return getBaseSpeed() - getLoadFactor() * _numberOfCoconuts;
public double getLoadFactor() {
    return randomDouble(3.12);
class NorwegianBlue extends Bird {
private boolean _isNailed;
private double _voltage;
public NorwegianBlue() {
    this(randomInt(10)<2, randomDouble(12.0));
public NorwegianBlue(boolean isNailed, double voltage) {
    _isNailed = isNailed;
    _voltage = voltage;
double getAirSpeed() {
    return _isNailed ? 0 : getBaseSpeed(_voltage);
double getBaseSpeed(double voltage) {
    return getBaseSpeed() * (1+(voltage/Math.PI));
public class AirSpeedTest
public static void main(String[] args)
    System.out.println("EUROPEAN: "+new EuropeanSwallow().getAirSpeed());
    System.out.println("AFRICAN: "+new AfricanSwallow().getAirSpeed());
    System.out.println("NORWEGIAN_BLUE: "+new NorwegianBlue().getAirSpeed());
}... and the requisite background for the uninitiated [NORWEGIAN_BLUE|http://www.youtube.com/watch?v=4vuW6tQ0218] and [EUROPEAN v AFRICAN|http://www.youtube.com/watch?v=4b4bGAoVR7g].
You have to know these things when you're a King you know.
Cheers. Keith.

How to avoid multiple password prompt for intarnet portal

we have developed a intranet portal in Share Point 2013 with multiple site collection. when accessing through IE, Chrome, we can do settings to avoid multiple password prompt by adding the domain name of site in Trusted sites. How we can achieve the same in Safari while accessing through MAC or IPAD

first time when you call the BSP application from the browser (or by double clicking the BSP_APPLICATION link from SAP GUI) you need to pass user credentials. For further windows this will not be required as browser will remember your info.
if you need to <b>somehow</b> avoid this then the only option is to hard code the user id and password in the service in transaction SICF or by passing the same via URL.
Another option is that if you port this application in a SAP portal environment, SSO can be used .
Hope this helps.
Regards
Raja

Query: how to avoid multiple POs from being combined into delivery

Hi all,
We are working on an enhancement.
The requirement is:
We need to avoid multiple POs from being combined into one delivery.
Any pointers in this regard would be highly appreciated.
regards
Gurpreet

Hi Murali,
I think your suggestion should solve Gurpreets problem.
I have a query here.
In the copy controls VLTA, defines between sales doc to dlivery doc.
Here we want to maintain copy control between purchasing doc to delivery doc.
How do we achive this?
Also in my view we should write a new combination requirement.
Please check if combination requirement 51 can be used?
Regards
Abhishek

HT3529 How to delete multiple messages at the same time?

I'm new with and IPhone I try to delete multiple messages at the same time. and I can't find how to do this.

Email messages? Tap the edit button...tap each message you want to delete...hit delete...once in trash, tap edit, then tap delete all.

How to Avoid confirmation messages in midp

Hi everybody,
while trying to take pictures or connecting with some servlet we get following confirm messages in midlets:
Multimedia Sna... Midlet wants to get snapshot, Is that OK?
How to avoid from these messages ?
thanks in advance,
zeeshan.

You will probably need to sign your MIDlet and request the appropiate permissions in the jad.
Understanding MIDP 2.0's Security Architecture
shmoove

How to avoid multiple messages in Moni

Similar Messages

Maybe you are looking for