Forum Problem: Date / Time ------------------
Would somebody please try to get the date and time set right on this forum? It is 9-September, but current posts show up as 29-August!!!!
And when I preview this post, it shows as 20-August
Would somebody please try to get the date and time set right on this forum? It is 9-September, but current posts show up as 29-August!!!!
And when I preview this post, it shows as 20-August
Similar Messages
-
Date/Time Problem Results In Spinning Wheel
My mom's eMac recently was shutdown during a power outage, and came back with the date/time reset problem (I'm familiar with this when my battery comes loose on my iBook).
Only problem is, if I try to launch System Preference or Open Date & Time I get the spinning wheel that doesn't allow me to reset the date/time. On top of that, I can't seem to get anything to launch right now b/c it seems Finder is what's getting the spinning wheel. The only thing that launches is AIM (which is on autolaunch), but it can't be accessed at all from the computer (though it does show up as signed on when I'm signed on to AIM at work).
I've tried a force quit to relaunch finder with no results, and have also blasted the PRAM and tried the instructions for resetting the PMU (if I'm doing that right).
One thing I can across is the possibility I need to replace the internal backup battery. Could that be the problem, or have I run into soemthing much more serious.
Any help would be appreciated.Hello! A power outage often damages the disk's directory information. Boot from the install disc ("c" key down at startup with disc inserted) and right after the language screen navigate through the drop down menus to the disk utility and repair the disc. Run the repair multiple times if it reports errors until it doesn't report errors. Tom
-
Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad “/Volumes/Data/MacBook Pro de Carlos.sparsebundle” ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.
Try Here > http://pondini.org/TM/Time_Capsule.html
Perhaps P 2 > Time Machine could not complete . . . sparsebundle could not be accessed. (Error 109). -
[8i] Date/Time calculation problem...
So, I am currently facing a situation where I need to calculate the total hours a workstation is in use for each day in a particular time period. I have a table with the log of each time each workstation is used. The problem is, a workstation can be used for any amount of time, starting on any day and ending on any day. This means that a particular entry in the log can span multiple days. I'm not sure how to split the difference between the end date/time of an entry and the start date/time of the entry over multiple days.
Here's a sample table and some sample data for what I'm trying to do:
-- Note: in reality, this table contains more columns
CREATE TABLE my_hrs
( record_id NUMBER NOT NULL
, sdatetime DATE
, edatetime DATE
, workstation VARCHAR2(4)
CONSTRAINT my_hrs_pk PRIMARY KEY (record_id)
-- Note: sdatetime, edatetime, and workstation CAN all be NULL, though I won't provide
-- any sample data for these situations since I want to ignore them in my results
-- Additionally, there are hundreds of workstations, but I'm only using 2 to simplify the sample data
INSERT INTO my_hrs
VALUES (12345,TO_DATE('03/01/2010 08:00','mm/dd/yyyy HH24:MI'),TO_DATE('03/01/2010 13:35','mm/dd/yyyy HH24:MI'),'123A');
INSERT INTO my_hrs
VALUES (13427,TO_DATE('03/01/2010 08:10','mm/dd/yyyy HH24:MI'),TO_DATE('03/01/2010 10:02','mm/dd/yyyy HH24:MI'),'321B');
INSERT INTO my_hrs
VALUES (21543,TO_DATE('03/01/2010 14:07','mm/dd/yyyy HH24:MI'),TO_DATE('03/01/2010 16:30','mm/dd/yyyy HH24:MI'),'123A');
INSERT INTO my_hrs
VALUES (22412,TO_DATE('03/01/2010 10:15','mm/dd/yyyy HH24:MI'),TO_DATE('03/01/2010 15:30','mm/dd/yyyy HH24:MI'),'321B');
INSERT INTO my_hrs
VALUES (11976,TO_DATE('03/01/2010 17:00','mm/dd/yyyy HH24:MI'),TO_DATE('03/02/2010 02:30','mm/dd/yyyy HH24:MI'),'123A');
INSERT INTO my_hrs
VALUES (34215,TO_DATE('03/01/2010 22:10','mm/dd/yyyy HH24:MI'),TO_DATE('03/02/2010 04:30','mm/dd/yyyy HH24:MI'),'321B');
INSERT INTO my_hrs
VALUES (24789,TO_DATE('03/02/2010 13:00','mm/dd/yyyy HH24:MI'),TO_DATE('03/05/2010 02:30','mm/dd/yyyy HH24:MI'),'123A');
INSERT INTO my_hrs
VALUES (31542,TO_DATE('03/02/2010 21:30','mm/dd/yyyy HH24:MI'),TO_DATE('03/04/2010 10:30','mm/dd/yyyy HH24:MI'),'321B');Based on my sample data above, these are the results I want to see:
WORKSTATION DATE HRS_IN_USE
123A 3/1/2010 14.96667
321B 3/1/2010 8.95000
123A 3/2/2010 13.50000
321B 3/2/2010 7.00000
123A 3/3/2010 24.00000
321B 3/3/2010 24.00000
123A 3/4/2010 24.00000
321B 3/4/2010 10.50000
123A 3/5/2010 2.50000
321B 3/5/2010 0.00000Is this possible? (Please note, if the workstation was not used on a particular day, I want it to show 0 hours for that workstation for that day). Another thing to note is that I'm working with Oracle 8i.
Thanks in advance for the help!Thanks, Frank, your explanation helped. My main problem was just that I couldn't picture what that line of the query was doing, even working from the inside out. I learn better through visual and hands-on methods, so to really understand, I had to look at the cross-join of a and h and go line by line. (In case there's anybody who looks at this post in the future and learns like I do, I've posted that data below).
This definitely solves my problem!
>
By the way, this query is full of things that could be done better in later versions of Oracle. Generating table a is just one of them. Starting in Oracle 9, you can do a CONNECT BY query on dual to generate exacly how many rows you need. You never have to worry about an upper bound, and it's much faster than using ROWNUM. From time to time you might gently remind the people who decide these things that you're using a very old, unsupported version of Oracle, and that everyone could be more productive if you upgraded.
>
I could go on and on on this topic.... we have tried and continue to try to convince the powers that be to pay for the upgrades... if it were just Oracle that needed to be upgraded, we might actually have a chance at succeeding. As it is, ...ha.
TABLE A (FROM SUB-QUERY)
a_date next_date
3/1/2010 3/2/2010
3/2/2010 3/3/2010
3/3/2010 3/4/2010
3/4/2010 3/5/2010
3/5/2010 3/6/2010
TABLE H (MY_HRS)
record_id sdatetime edatetime workstation
10000 2/28/2010 18:00 3/1/2010 5:30 123A
12345 3/1/2010 8:00 3/1/2010 13:35 123A
13427 3/1/2010 8:10 3/1/2010 10:02 321B
21543 3/1/2010 14:07 3/1/2010 16:30 123A
22412 3/1/2010 10:15 3/1/2010 15:30 321B
11976 3/1/2010 17:00 3/2/2010 2:30 123A
34215 3/1/2010 22:10 3/2/2010 4:30 321B
24789 3/2/2010 13:00 3/5/2010 2:30 123A
31542 3/2/2010 21:30 3/4/2010 10:30 321B
CROSS-JOIN TABLE A WITH TABLE H (and calculations done by the query below)
record_id sdatetime edatetime workstation a_date next_date LEAST (h.edatetime, a.next_date) GREATEST (h.sdatetime, a.a_date) GREATEST(TO_NUMBER(L-G),0)
10000 2/28/2010 18:00 3/1/2010 5:30 123A 3/1/2010 3/2/2010 3/1/2010 5:30 3/1/2010 0:00 0.229166667
10000 2/28/2010 18:00 3/1/2010 5:30 123A 3/2/2010 3/3/2010 3/1/2010 5:30 3/2/2010 0:00 0.00000
10000 2/28/2010 18:00 3/1/2010 5:30 123A 3/3/2010 3/4/2010 3/1/2010 5:30 3/3/2010 0:00 0.00000
10000 2/28/2010 18:00 3/1/2010 5:30 123A 3/4/2010 3/5/2010 3/1/2010 5:30 3/4/2010 0:00 0.00000
10000 2/28/2010 18:00 3/1/2010 5:30 123A 3/5/2010 3/6/2010 3/1/2010 5:30 3/5/2010 0:00 0.00000
12345 3/1/2010 8:00 3/1/2010 13:35 123A 3/1/2010 3/2/2010 3/1/2010 13:35 3/1/2010 8:00 0.23264
12345 3/1/2010 8:00 3/1/2010 13:35 123A 3/2/2010 3/3/2010 3/1/2010 13:35 3/2/2010 0:00 0.00000
12345 3/1/2010 8:00 3/1/2010 13:35 123A 3/3/2010 3/4/2010 3/1/2010 13:35 3/3/2010 0:00 0.00000
12345 3/1/2010 8:00 3/1/2010 13:35 123A 3/4/2010 3/5/2010 3/1/2010 13:35 3/4/2010 0:00 0.00000
12345 3/1/2010 8:00 3/1/2010 13:35 123A 3/5/2010 3/6/2010 3/1/2010 13:35 3/5/2010 0:00 0.00000
13427 3/1/2010 8:10 3/1/2010 10:02 321B 3/1/2010 3/2/2010 3/1/2010 10:02 3/1/2010 8:10 0.07778
13427 3/1/2010 8:10 3/1/2010 10:02 321B 3/2/2010 3/3/2010 3/1/2010 10:02 3/2/2010 0:00 0.00000
13427 3/1/2010 8:10 3/1/2010 10:02 321B 3/3/2010 3/4/2010 3/1/2010 10:02 3/3/2010 0:00 0.00000
13427 3/1/2010 8:10 3/1/2010 10:02 321B 3/4/2010 3/5/2010 3/1/2010 10:02 3/4/2010 0:00 0.00000
13427 3/1/2010 8:10 3/1/2010 10:02 321B 3/5/2010 3/6/2010 3/1/2010 10:02 3/5/2010 0:00 0.00000
21543 3/1/2010 14:07 3/1/2010 16:30 123A 3/1/2010 3/2/2010 3/1/2010 16:30 3/1/2010 14:07 0.09931
21543 3/1/2010 14:07 3/1/2010 16:30 123A 3/2/2010 3/3/2010 3/1/2010 16:30 3/2/2010 0:00 0.00000
21543 3/1/2010 14:07 3/1/2010 16:30 123A 3/3/2010 3/4/2010 3/1/2010 16:30 3/3/2010 0:00 0.00000
21543 3/1/2010 14:07 3/1/2010 16:30 123A 3/4/2010 3/5/2010 3/1/2010 16:30 3/4/2010 0:00 0.00000
21543 3/1/2010 14:07 3/1/2010 16:30 123A 3/5/2010 3/6/2010 3/1/2010 16:30 3/5/2010 0:00 0.00000
22412 3/1/2010 10:15 3/1/2010 15:30 321B 3/1/2010 3/2/2010 3/1/2010 15:30 3/1/2010 10:15 0.21875
22412 3/1/2010 10:15 3/1/2010 15:30 321B 3/2/2010 3/3/2010 3/1/2010 15:30 3/2/2010 0:00 0.00000
22412 3/1/2010 10:15 3/1/2010 15:30 321B 3/3/2010 3/4/2010 3/1/2010 15:30 3/3/2010 0:00 0.00000
22412 3/1/2010 10:15 3/1/2010 15:30 321B 3/4/2010 3/5/2010 3/1/2010 15:30 3/4/2010 0:00 0.00000
22412 3/1/2010 10:15 3/1/2010 15:30 321B 3/5/2010 3/6/2010 3/1/2010 15:30 3/5/2010 0:00 0.00000
11976 3/1/2010 17:00 3/2/2010 2:30 123A 3/1/2010 3/2/2010 3/2/2010 0:00 3/1/2010 17:00 0.29167
11976 3/1/2010 17:00 3/2/2010 2:30 123A 3/2/2010 3/3/2010 3/2/2010 2:30 3/2/2010 0:00 0.10417
11976 3/1/2010 17:00 3/2/2010 2:30 123A 3/3/2010 3/4/2010 3/2/2010 2:30 3/3/2010 0:00 0.00000
11976 3/1/2010 17:00 3/2/2010 2:30 123A 3/4/2010 3/5/2010 3/2/2010 2:30 3/4/2010 0:00 0.00000
11976 3/1/2010 17:00 3/2/2010 2:30 123A 3/5/2010 3/6/2010 3/2/2010 2:30 3/5/2010 0:00 0.00000
34215 3/1/2010 22:10 3/2/2010 4:30 321B 3/1/2010 3/2/2010 3/2/2010 0:00 3/1/2010 22:10 0.07639
34215 3/1/2010 22:10 3/2/2010 4:30 321B 3/2/2010 3/3/2010 3/2/2010 4:30 3/2/2010 0:00 0.18750
34215 3/1/2010 22:10 3/2/2010 4:30 321B 3/3/2010 3/4/2010 3/2/2010 4:30 3/3/2010 0:00 0.00000
34215 3/1/2010 22:10 3/2/2010 4:30 321B 3/4/2010 3/5/2010 3/2/2010 4:30 3/4/2010 0:00 0.00000
34215 3/1/2010 22:10 3/2/2010 4:30 321B 3/5/2010 3/6/2010 3/2/2010 4:30 3/5/2010 0:00 0.00000
24789 3/2/2010 13:00 3/5/2010 2:30 123A 3/1/2010 3/2/2010 3/2/2010 0:00 3/2/2010 13:00 0.00000
24789 3/2/2010 13:00 3/5/2010 2:30 123A 3/2/2010 3/3/2010 3/3/2010 0:00 3/2/2010 13:00 0.45833
24789 3/2/2010 13:00 3/5/2010 2:30 123A 3/3/2010 3/4/2010 3/4/2010 0:00 3/3/2010 0:00 1.00000
24789 3/2/2010 13:00 3/5/2010 2:30 123A 3/4/2010 3/5/2010 3/5/2010 0:00 3/4/2010 0:00 1.00000
24789 3/2/2010 13:00 3/5/2010 2:30 123A 3/5/2010 3/6/2010 3/5/2010 2:30 3/5/2010 0:00 0.10417
31542 3/2/2010 21:30 3/4/2010 10:30 321B 3/1/2010 3/2/2010 3/2/2010 0:00 3/2/2010 21:30 0.00000
31542 3/2/2010 21:30 3/4/2010 10:30 321B 3/2/2010 3/3/2010 3/3/2010 0:00 3/2/2010 21:30 0.10417
31542 3/2/2010 21:30 3/4/2010 10:30 321B 3/3/2010 3/4/2010 3/4/2010 0:00 3/3/2010 0:00 1.00000
31542 3/2/2010 21:30 3/4/2010 10:30 321B 3/4/2010 3/5/2010 3/4/2010 10:30 3/4/2010 0:00 0.43750
31542 3/2/2010 21:30 3/4/2010 10:30 321B 3/5/2010 3/6/2010 3/4/2010 10:30 3/5/2010 0:00 0.00000
(Then, the query sums up the last column in the "table" above, grouped by a_date and workstation). -
Problem 1:
i'm using date in midlet, but it does not give me the correct System time.
Problem 2:
the date field returns the date & time in milliseconds. how can i get the date in format 06 sep 2002.Hi,
You can use the method System.currentTimeMillis(), that returns a long value that is your system's current time.
DateField dateField = new DateField("Date", DateField.DATE_TIME);
dateField.setDate(new Date(System.currentTimeMillis()));
To get the day, month and year you can use the Calendar class.
Calendar calend = Calendar.getInstance();
calend.setTime(new Date(long yourdatemillis));
So you can get the correct parameters by calling
calend.DAY_OF_MONTH, calend.MONTH and calend.YEAR and appending it to a String and displaying it. But the day of month and month, i think, returns the correct value decreased of 1.
Ricardo -
Problem with Date & Time Auto Update
Hi everyone,
I have been experiencing a date & time issue with my MacBook Air. (I am running 10.5.5 with all the latest software updates except for iTunes 8). Here's what's going on:
Under the Date & Time preferences, whenever I try to check the box for "Set date & time automatically", the date and time do not update. I thought Norton might be the culprit in this case, but I have thoroughly uninstalled it, and this problem still persists. (I am actually borrowing this laptop for work, so I don't know if someone else possibly did something weird to it before I started using it. As far as I can remember, I've always had this problem -- the automatic setting has never worked.)
I am connected to the internet when I do this, and I already have my time zone selected. Am I missing something obvious here?
I apologize if this issue has been brought up before, but I did a lot of searching and couldn't find anything. Any suggestions would be greatly appreciated!!
Thank you.whenever I try to check the box for "Set date & time automatically"
You check it and the time does not update, or you try to check it and it doesn't show a little tick mark?
Try it with Console.app open and see does it report any errors. Try changing the time server.
AK -
Problem with Date / Time Title - Showing Inacurate Information
I use iMovie to make videos for my job. The videos need to have an accurate running time and date displayed on them. I use the "Date/Time" Title option and the running time and date appear on the video. BUT- there is a problem. The time is wrong.
When I import a video clip (from my Panasonic HDC-TM80) into iMovie, I can see the "time and date created" as well as the "length" of the video clip. The time and date created shows the time and date of when the clip ENDS. When I overlay the "Date/Time" Title, it starts the time (at the beginning of the clip) from the created time (which is actually the end).
Example:
Clip Created (end of clip): 3/23/11 10:30:00am
Length of clip: 12 min. 35 sec.
The actual Date/Time Title should show 10:17:25am at the beginning and runs through 10:30:00am (the end).
But instead it shows 10:30:00am at the beginning and runs through 10:42:35am. This obviously results in a 12 min. 35 sec. inaccuracy.
Is this a problem with the software? Is there a way to contact someone to alert them of this problem? Or am I missing something simple?
Thanks in advance for anyone's help.
-as a quick fix, I adjusted the time and date on the video clips so that it would show the correct info, but I'm usually working with several clips at a time and it is laborious to change each one.I don't have an answer but was wondering how you like the TM80? Except for the date/time issue, is it compatible with iMovie'11?
Thanks! -
Hello there
This maybe a simple problem but on the Date time field object i have input a display pattern and put the error message in. When I preview the PDF and populate the object with random text the pop up box will display my error message.
What it does not do is clear the text I have input so the date can be re-entered correctly, which is what I was expecting. Therefore the user can continue on without addressing the date correctly.
Can anyone advise what I should do to get this to work?
Thanks
DarrenHi
The first time I thinkanyone has answered their own post. So for the benefit of anyone else I added the folowing script to the exit event
of the date field object
if (page.subform.dateobject.rawValue == page.subform.dateobject.formattedValue) {
xfa.host.resetData("xfa.form.Formtitle.Page.subform.datefieldobject")
Not sure why it works but just played around with it. -
I have got problem with "Date & Time"
I have bought a new Macbook Air 13"
I have chosen "set date & time auto..."
However, it shows in up right corner wrong date. Also all mail, reminders and etc work with wrong date.
Please, tell me what to do with this problem.
Sincerelly,
MarkIncorrect date or time displayed in various applications
-
Insert current date/time problem in ViewObject
Hi!
I'm trying to setAttribute to a Date type field.
I have a method:
public String getCurrDateString() throws ParseException, java.sql.SQLException {
SimpleDateFormat formatter = new SimpleDateFormat ("dd-MMM-yyyy hh:mm:ss aa");
Date currentTime_1 = new Date();
return formatter.format(currentTime_1);
All the time i call this method such as:
HistoryViewImpl histVO=getHistoryView();
Row r=histVO.createRow();
r.setAttribute("Entrydatetime",cp.getCurrDateString());
I get oracle.jbo.domain.DataCreationException: JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value:19-Jun-2002 10:14:33 AM
the strange thing is, that Oracle recognizes this kind of format, because if I use different pattern such as "yyyy-MM-dd", which returns string "2002-06-19", r.setAttribute("Entrydatetime",cp.getCurrDateString()) method works fine and in Oracle table field we have inserted value 19-Jun-2002 12:00:00 PM. The problem is, that i don't need 12:00:00 PM as a time, i need current time.
What am i doing wrong? Or does it mean that oracle.jbo.domain.Date doesn't know format "dd-MMM-yyyy hh:mm:ss aa"?Hi!
I'm trying to setAttribute to a Date type field.
I have a method:
public String getCurrDateString() throws ParseException, java.sql.SQLException {
SimpleDateFormat formatter = new SimpleDateFormat ("dd-MMM-yyyy hh:mm:ss aa");
Date currentTime_1 = new Date();
return formatter.format(currentTime_1);
All the time i call this method such as:
HistoryViewImpl histVO=getHistoryView();
Row r=histVO.createRow();
r.setAttribute("Entrydatetime",cp.getCurrDateString());Instead of passing in the "String" pass the date object as is. oracle.jbo.domain.Date should be able to convert java.sql.Date/Time/Timestamp and store the time bits as set.
If you have to pass in string, then establish a Formatter on the attribute with appropriate date format and then use the AttributeHints interface from the relevant AttributeDef object on the row to parse the input String into a valid parsed object that you can set into the row.
(See oracle.jbo.uicli.binding.JUCtrlValueBinding.setAttributeInRow() method for a complete usage - source in bc4j\src\bc4juisrc.zip)
I get oracle.jbo.domain.DataCreationException: JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value:19-Jun-2002 10:14:33 AM
the strange thing is, that Oracle recognizes this kind of format, because if I use different pattern such as "yyyy-MM-dd", which returns string "2002-06-19", r.setAttribute("Entrydatetime",cp.getCurrDateString()) method works fine and in Oracle table field we have inserted value 19-Jun-2002 12:00:00 PM. The problem is, that i don't need 12:00:00 PM as a time, i need current time.
What am i doing wrong? Or does it mean that oracle.jbo.domain.Date doesn't know format "dd-MMM-yyyy hh:mm:ss aa"? -
I'm having a frustrating problem with the MacBook. I like to have the time showing in the menu bar and have checked the "show Date & Time" box in the system preferences (even clicked the lock to prevent changes), but every few restarts of the computer, the date and time disappears and I have to go back into system preferences and add it again! This has been going on for months and is driving me up the wall! Has anyone had a similar problem and know how to fix it?
I've tried reparing the permissions as well as resetting the PRAMs, but nothing has seemed to work yet.
Cheers,
CandiceThanks for the advice.. it's a little tough to tell, because it comes and goes after a fair number of restarts... sometimes I set it to show in the menu and one restart later it's gone, sometimes it takes 5 - 10 restarts before I find that it's disappeared again. If I start up in safe mode, will something get fixed and can start up normally for future starts?
I have two user accounts on the computer and the problem is there for both. I've turned date and time on for both accounts.
Cheers,
Candice -
Time Machine - Date & Time format problem
I'm sorry if this has been mentioned elsewhere, but I was unable to find it. Following a change I made to the Date & Time prefs in order for the complete date to show in the menu bar I am now unable to determine the time a backup was made or anything else for that matter.
I made the modification via the International Preferences - Formats pane, but this did not display as I wanted and I have since gone back to how it was originally or so I thought! Now all the time stamps are showing as a five or six digit number. Does anyone know have to change this back!
thanks
littlebadlittlebad wrote:
I'm sorry if this has been mentioned elsewhere, but I was unable to find it. Following a change I made to the Date & Time prefs in order for the complete date to show in the menu bar I am now unable to determine the time a backup was made or anything else for that matter.
I made the modification via the International Preferences - Formats pane, but this did not display as I wanted and I have since gone back to how it was originally or so I thought! Now all the time stamps are showing as a five or six digit number. Does anyone know have to change this back!
Hi, and welcome to the forums.
Do you mean in the TM Interface +(Enter Time Machine)?+
If so, try turning TM off, selecting the "none" drive, quitting System Preferences, then going back and re-selecting the drive.
If that doesn't work, try a "full reset:"
Turn TM Off, de-select the drive, note any exclusions in Options, quit System Preferences.
Delete the file /Library/Preferences/com.apple.TimeMachine.plist (in your top-level Library folder, not your home folder).
Re-select your drive (and re-enter any exclusions).
Do a +Back Up Now+ or wait for the next scheduled backup. -
'New' Exchange Battery not holding charge - Date & Time problems
I recently received a 'new' exchange battery for my 2001 500mhz white ibook (OSX 10.3.9, 320ram), as part of the Battery Exchange program, and now I'm having some new problems.
Since I started using the battery a few weeks ago, I've been having constant problems with the Date & Time reseting itself to 1969. I reset to current time, but when I turn on again, it's resets back again. Also, this battery is not holding a charge very well, lasting only about 40 minutes after fully charged (My old battery lasted 2 hours).
I calibrated the battery when i first received it, and I've reset the PMU twice, but no luck.
Thanks in advance for any help & advice....
ibook (500mhz 2001) Mac OS X (10.3.9)Is there any such program for the G3s?
Only if you replaced your original battery with one from Apple within a certain time frame and within a specific range of serial numbers. Check out the details here:
https://depot.info.apple.com/batteryexchange/index.html -
Problem with Date/Time field in Adobe LiveCycle
I am trying to create a form that has a check-in and check-out dates. I want the user to enter those dates and then have the form automatically compute how many nights the user intends on staying.
I have two fields, CHECKIN and CHECKOUT, set up as text fields. My third field, NIGHTS, has the following script to do the calculation:
var strStart = CHECKIN.rawValue
var strEnd = CHECKOUT.rawValue
if(strStart.length && strEnd.length)
var dateStart = util.scand("mmm d, yyyy",strStart);
var dateEnd = util.scand("mmm d, yyyy",strEnd);
var diff = dateEnd.getTime() - dateStart.getTime();
var oneDay = 24 * 60 * 60 * 1000;
var days = Math.floor(diff/oneDay);
this.rawValue = days;
else
this.rawValue = 0;
NOW...this is fine if the user inputs a four-digit year. If not, it's trouble. SO, what I want to do is change the CHECKIN and CHECKOUT fields to the date/time field so they select the date off the pop-up calendar.
When I make the changes, I can't get the script to work for the NIGHTS field.
CAN ANYONE HELP THIS NEWBIE?Make sure the format of the date strings provided by the calendar is what you are expecting. Or use the "formattedValue" for the input strings.
-
Date & Time in menu bar problem
Hi
OK, I cannot get my digital clock icon to display in the menu bar on top of desktop. I had it in the past but when I go to 'date & time' in system preferences, select box to click on it, and it will deselect itself somehow. End result, no digital clock in my menu bar.
Any suggestions please???
Thanks,
MareeChoose Go to Folder from the Finder's Go menu and enter /System/Library/CoreServices/Menu Extras/ as the folder's location; when this folder appears, double-click the item Clock or Clock.menu inside and see if it appears in the menu bar.
If the clock appears, enter ~/Library/Preferences into the Go to Folder prompt and move the file com.apple.systemuiserver.plist in that folder to the desktop. Try adding the clock again.
If the clock does not appear or the item doesn't exist, use Pacifist to extract Clock.menu from your Mac OS X installation disks and then run the combo updater for your version of Mac OS X.
(16120)
Maybe you are looking for
-
ADF Web applications give error when parent is set to "orabpel"
Hi all, i use the application server 10.1.3.1 of the SOA 10.1.3, i try to deploy an ADF web application that uses the BPEL APIs, in the server.xml, i set the application parent to 'orabpel', when i start the application by launching the first jspx pa
-
'transport' applications from QA to Production - isolation group error
Hi, I have a QA isolation group connected to my QA ECC system in which I created job definitions and chains and assigned all of it to my Custom application group. I exported this by right clicking on Custom and 'Export tree..' to a *.CAR file. I now
-
Looking for some specific arguments comparing Crystal to Webi. I have the white paper that provides some examples (i.e., Pixel-perfect production reporting vs. ease-of-use / analysis) but am looking for other examples and thought the development com
-
I don't know what else to put. I am just asking a question.
-
We have different of this PC's in our factory. Before, my colleague did all the fixes if there were problems. Now he has left the company... So my problem: this pc has a faulty harddisk. I have some spare parts, also this harddrive. Harddrive = West