'transport' applications from QA to Production - isolation group error

Hi,
I have a QA isolation group connected to my QA ECC system in which I created job definitions and chains and assigned all of it to my Custom application group. I exported this by right clicking on Custom and 'Export tree..' to a *.CAR file.
I now try and import the same *.CAR file into my Prod isolation group connected to my Prod ECC system. I get the error:
Import failed, no objects have been imported: JCS-102242: Object cannot be persisted to an isolation group other than the active one.
Why is this? How can I 'transport' my QA config to my Prod config?
Thanks,
Adriaan

For anyone interested: you have to run a merge isolation groups CPS system job to get rid of the isolation groups after you installed a full license

Similar Messages

I'm now at Sudan. I'm from Bangladesh. After coming Sudan I can't download/install any application from apps store. It shows error code-1009. Now what to do ? can anybody help me....?

I'm now at Sudan. I'm from Bangladesh. After coming Sudan I can't download/install any application from apps store. It shows error code-1009. Now what to do ? can anybody help me....?

Are you trying to download apps from the Sudan app store? If so, you have to have a valid credit card and billing address in the country of the app store to purchase from that app store.
Some countries also have restrictions on the apps and functions allowed in their countries.

Transport FG from Quality to Production

Dear All,
I have created couple of function group and transported to Quality system. Now as per the requirement I have made the changes in different FM of these FG as well as includes. So there are few versions in DEV system.
Now finally i want to transport the these FG to production system. So which transport request I have to use to move to the production?? In Quality it showing different request for each FM and include (Latest version request number).
Can anybody tell me how I can transport my all FG to the production via Quality??
Is it good way to create one more request for all FG using SE03 tcode, so that all FM with includes i have final request in DEV system which I can move to Production via Quality....
Good suggesstion are most welcome.....
Thanks in stack......

Hello Nilesh
This is quite a common problem with function groups.
However, if you have at least one system where the entire function group is complete (i.e. contains all function modules and the TOP include contains all data definitions and the frame program all additional includes) then you can go to the workbench (SE80). Right-click on your function group and choose "Other functions" -> "Write transport request entry". The CTS puts the function group into the transport request which should then be transported entirely.
I highly recommend first to "synchronize" your DEV with your Quality system, repeat the tests there and, if everything was successful, transport to Production.
Regards
Uwe

How to transport requests from development to production server

hi gurus
i am new to SDN
can u pls give me detailed information how to transport requests from development server to production server?if possible give me screen shot documents
regards
surya

Hi
Transporting
There are help pages that discuss creation of transports.
In simple terms, you: create a transport package
add objects to the package export the package, plus optionally any related objects to a predefined folder/directory on the portal server into a file with an extension of .EPA copy the .EPA file to the import folder of your QA system and import it test the contents on the QA system copy the .EPA file to the import folder of your production system and import it Create a transport package file
Here is the step by step procedure to create a transport package:
For Export
1. Go to system administration, and click on transport?export.
2. In the middle pane, select the folder you want to export and right click on the Transport Package. 3. Fill in the General Properties i.e the name of the package, id and description. 4. And say finish and open the object for editing.
5. When the object has been opened then right click on the object you want to transport, and say "Add object to the Transport Package".
6. Check the checkbox of the item u have added and see the properties if it has been added properly. 7. Now click on the save button.
8. After the object is saved, click on the export button. 9. U will have an option to select where to store the .epa file which will be generated. U can overwrite an existing one by selecting the browse button, or store it with the generated name in the location it automatically generates. 10. Now Click on the Start Export button.
11. once the export is completed, it shows a report on how much time is taken to generate the .epa file. 12. Here there is an option for downloading the .epa file. Click on the link and download the file. This file is ready to be uploaded into any other EP Server.
For Import:
Pre-requisites: You have to copy the .epa file created while export into the local drive. Optionally, you have to manually copy the .epa file generated in the export function into the Import directory of the server ie. chooseFollow the steps below for importing a certain file. 1. Go to System Administration in the portal, and click on Transport?Import. 2. For the source of the package, Click on the radio button Server for the .epa file you have copied lately. Else, click on the radio button on client if you are operating in the client and select the .epa file you have stored on the local drive. 3. Now select the file from the browse option and click on Upload.
4. Now click on the import button. 5. Once the import process is finished, the report is shown. In the whole process, the par files are not included in the .epa files. For the par files to be included into the .epa files then we have to change the pcdStartup.properties file in the server. The property to be changed is Pcd.TransportApplication.Export.ExcludeObjectTypesAfterRuleProcessing: Keep this property's value as empty for enabling the par files to be uploaded into the .epa. You can check for this property in the portal in the following -System Administration-Support-Portal Content Directory-PCD Configuration.

Migrating Essbase Application from QA to Production

Hi Experts,
I need to migrate an Essbase application (PLNG) from QA to Production system. This migration include business rules, calc scripts, load rules, and report scripts. The metadata repository resides in an Oracle DB. I am following step:
Shutdown the Essbase application PLNG.
Move the complete files under $ARBORPATH/app/PLNG from QA to Production
Move all the Essbase data files for Essbase PLNG databases pag and ind files from QA to Production
Export the PLNG user from QA and import it to the Production Oracle DB (metadata)
I need comments whether I am following the right procedure or not. Also the PLNG application contains one database PLNG1 which I want to keep as is , so in that case, how do I need to import the metadata from QA to Prod.
Thanks
-Samar-

Hello Nome02:
I would test first what dhowehughes has said. You can find this wizard on File->Wizards->Migration menu in Essbase Administration Services Console. This usually works for all metadata with two exceptions:
1) Security issues. If you are using Shared Services, you will not be able to migrate users, provisioning,... with this method. You must use Shared Services instead. If your Essbase installation is stand-alone, then you can use this wizard to migrate security.
2) Data. You have to export data to a file/s. Transfer this/these file/s to Prod environment and import them.
Regards
Javier

Moving Planning application from development to production

Hello All,
Pretty sure this has been answered heaps of times but here goes...
I have dev and prod enviroments of planning and essbase - version 9.3.1
Dev and Prod have own shared services install and also own SQL Servers
EPMA is used in both environments.
I have a planning application in dev with forms, task lists, business rules etc and access assigments.
* What would be the best method to move the application from dev to prod?
* How could I refresh changes I make in dev to prod server eg. changes in EPMA - add new members, changes to forms and business rules?
Appreciate your advice.
Regards
Dinesh

Hi,
Try with this post to start with - Migration of Hyperion Planning Application
Version 9.3.1 EPMA migration on different shared services you would have to use the EPMA file generator to export to ads, then import the ads in the targe env.
Business rules export to XML through EAS, import on target (may have to update the XML because server names will be hardcoded)
Cheers
John
http://john-goodwin.blogspot.com/

Why i try to buy an application from my iPhone5 i get an Error message!!

why i try to buy an application from my iPhone5 i get the message (your purchase could not be completed) !
I have an updated IOS (6.1.4)

If you are also getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Migrating application from Development to Production

Good day all,
Our development phase came to an end and now we need to "deploy" our application on the production server (with it's own OID). Note that we're on release 10.1.2.
In my mind we need to do the following:
- Export users/groups using the OID utilities.
- Export database objects schema containing tables, procedures, functions... by creating a dump.
- Export Page groups, db providers using transport sets.
Just to confirm, is that what we need to do? Can anyone give me some details (especially on 1 and 2)?
Thanks is advance!
Jaco

These are the steps in general for performing the deployment.
For details on OID utilities, see
http://download-west.oracle.com/docs/cd/B14099_01/manage.1012/b14082/tools.htm#i1041008
In particular you would use ldapsearch (and outputting the result to a file) or ldifwrite (to directly write to the file) and bulkload (to load the data output from the development oid to production oid) utilities in particular to achieve the migration.
For schema migration of database schema - make sure that the schema components (tables, triggers, other objects) are exported and imported and there are no invalid objects that the database provider depends on before you start the next phase of migration (of portal content).

Transport scenario from development to production

Hello,
I have scenario from R\3 to BW
When I try to export the scenario to the xi production environment I have a problem-
In the design part is work Ok
In directory part I have a problem.
The .tpz file crate with BW dev system and I cannot succeed importing the .tpz file to xi production environment.
I received the follwing message:
Business system BWD100 is not assigned a business system in group XI_PRD
Any advice?
Regards
Elad

But, if you want to use another Business system Name in production.
in that case, create the new Business system and the realted integration server for this would be the production integration server and then go to the Dev / QA Business system that has to be replaced with this Business System , chosee Transports and assign the new Business System as the Target Business System.
Now when importing the TPZ file the business system name will point to the production business system as needed.
Regards
Bhavesh

Transporting object from development to production server

Hi Everyone,
Could you plz tell me how can i transport a object from development server to production serevr if that object is local in production server. And also could u tell me if the transfer structure is replaced if the names are different in both the server???

Could you plz tell me how can i transport a object from development server to production serevr if that object is local in production server.
Case 1: Object is in Prod, but not in Dev. and you want to align the systems through transports.
You will have to send it to D (which could be done by changing transport routes & then following normal transport procedure) & then will have to bring it back with overwrite originals.
Case 2: Object is present both in Prod & Dev.
You can send the transports D->P with Overwrite originals (following the transport procedures).
And also could u tell me if the transfer structure is replaced if the names are different in both the server???
If technical names are different in both the servers, the transfer structure will not be overwritten.

Transport sequence from dev to production

Dear Folks,
I am done with development & i would like to transport all the developed objects to production.
Could anyone provide the sequence along with necessary steps.
How to assign new requests to all the objects developed including queries.
Basically these are the list of objects:
Info objects,info area, info object catalogs,dtps, transformations, multi provider, info package, replicated data sources,queries etc.
I would like to assign once again new requests to all the objects developed and transport them.
Awaiting kind response.
Thanks,
Kitu

Hi,
Please follow the sequence:----
The respective Transports should have the following objects:
1. Base Objects -
a. Info Area
b. Info object catalogs
c. Info Objects
2. Info Providers u2013
a. Info Cubes
b. Multi Providers
c. Info Sets
d. Data Store Objects
e. Info Cube Aggregates
3. Transfer Rules u2013
a. Application Components
b. Communication Structure
c. Data Source replica
d. Info Packages
e. Transfer Rules
f. Transformations
g. Info Source Transaction data
h. Transfer Structure
i. Data sources (Active version)
j. Routines & BW Formulas used in the Transfer routines
k. Extract Structures
l. (Note) If the transfer structures and related objects are being transferred without preceding
Base Objects transport (e.g. while fixing an error) it is safer to transport the related Info
Objects as well.
4. Update Rules u2013
a. Update rules
b. Routines and formulas used in Update rules
c. DTPs
5. Process Chains u2013
a. Process Chains
b. Process Chain Starter
c. Process Variants
d. Event u2013 Administration Chains
6. Report Objects u2013
a. Reports
b. Report Objects
c. Web Templates
Hope this helps......
Assign if helps...
Regards,
SUman

Transporting Request from Development to Production

How do I create a package where I can select a number of datasources from rsa6, and give it a transport request number to transport it in QA?

For creating a package:
1. Using trasaction code SE21 you can create new Package. you can also check existing packages. OR
2. To create a new pkg use trx SE80, from the menu choose Package and you can create new or browse existing
3. Also refer: http://help.sap.com/saphelp_nw04s/helpdata/en/ea/c05da6f01011d3964000a0c94260a5/frameset.htm
To assign data source to a transport request:
1. when you first acitvate the business content datasource it will prompt to create a tp request.
2. check if your DS is not already packed in a tp: call SE03, search for object in requests/tasks by filtering your selection with OSOA.
3. in RSA6 with your DSource, check the object directory entry (from the menu) if it is not $TMP; otherwise change to a transportable devclass
4. then finally In RSA6, marking the DS and hitting the transport button, you should definitively be prompted to create a tp request

Ora -20001 When moving application from development to production

Hi,
I am currently trying to get this application to successfully to update but i am receiving the below error message.
The action I am performing is trying to update a record via a save button.
This issues an SQL_UPDATE to Automatic row processing.
ORA-20001: Error in DML: p_rowid=5718074, p_alt_rowid=PERSONAL_ID, p_rowid2=, p_alt_rowid2=. ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "F6632C5E819349C1307E25A54BBD2F93" application checksum = "0"
This is not happening on the development application or when I access the application via the admin login. It is only when I use the following url:
http://<server>:<port>/pls/htlmdb/f?p=101 I get the error.
Both versions of APEX are 2.2.1.00.04 and using IE 6.0
I have checked various entries in the forum but they do not fully meet the scenario I am getting,
Any help will be greatly appreciated.
Many thanks
Ty

oops wrong forum
Message was edited by:
user522107

Having a problem installing any CS 5.5 application from disk. Get a Runtime error. Any suggestions?

The error message says:
Runtime Error!
Program: C:\Temp\AIR9923.tmp
This application has requested the runtime to terminate in an unusual way.
I get the same message for every application I try and install.
InDesign CS5.5 is already installed.
Running Windows 7.
Any help please?

Thanks for the suggestion.
I have re-installed the latest version of AIR and still get the same problem. The instillation crashes every time while it's trying to install the Abobe help files.

Transport of activity from Quality to production for webDynpro Java applica

Hi,
can anybody tell me how do i go for transporting activity in webdynpro java applications from quality to production server.
i have done some changes in webdynpro code and deployed in quality system. i have created activity and now want to transport that to production so that the changed functionality should reflect in production system.
Its urgent so your quick suggestion will be appreciated.

Hi,
can anybody tell me how do i go for transporting activity in webdynpro java applications from quality to production server.
i have done some changes in webdynpro code and deployed in quality system. i have created activity and now want to transport that to production so that the changed functionality should reflect in production system.
Its urgent so your quick suggestion will be appreciated.
Hi Vijayalaxmi,
Following are the steps for transporting the content from DEV to QA
1. Check in the activity into DTR and activate it. Once it is activated successfully it will show green
2. Now go to transport view and release the activity by drilling down in waiting... node.
3. Once the activity is released it becomes available in the Consolidation tab of CMS.
4. Import the activity in consolidation tab
5. Assemble the components in the Assembly tab.
Once you assemble an .SCA file is created in \usr\<SID>\trans\CMS
6. Copy this file manually and deploy it using SDM in QA.
Hope it clears your doubts
Best Regards,
Ravi

'transport' applications from QA to Production - isolation group error

Similar Messages

Maybe you are looking for