Fotostream - PC sync to Apple Device not working !
Hello,
i configured my FotoStream as it was written in the FAQ of apple.com.
The problem is, that Picutres or Videos i add to the folder on my Windows Computer were not synced to my apple device ( i Phone, close future also iPad*late november *).
I did all i read in forums. Deinstall all, reconfigure, use default path, set Fotostream back via icloud.com. Nothing works. It is for me an Important feature so tell me what can i do, that the Pciture in the PC Dekstop Folder get synced. The way from iPhone to PC works perfect.
i read that iOS 6 is the problem. Is that true ? Under 5 it should work ?! If it is like that, when do will be a fix released.
Thank you very much.
Regards
MM
Now ideas in the whole APPLE Support Communities ?! Come on ... -_-'
Similar Messages
-
1080p for Apple Devices not working in Compressor
Was happy to see the new settings for the ATV3 in Compressor, but it doesn't work. I keep getting a qucktime error -108 about a third of the way into processing. Plenty of memory is showing in Activity Monitor.
I've tried both a short and long movie, with quickcluster turned on and off, both fail.
I've tried all the suggested fixes I can find. Reinstalling Compressor, Stop/Starting/Resetting sharing, deleting preferences.
The same movies work fine with the previous Apple TV/Device settings.
Share from FCPx to ATV3 works, but it extremely slow for the longer movies, and I want to use Compressor and the quickcluster.
Is anyone else having this problem.Some people (including me) have reported flakey changes in sharing after updating. (My issues, however, were broader than just Apple Device presets.)
If I understand your description correctly, sharing is working – just not for one preset – so it's questionable whether it's even Qmaster-related.
You've already tried the fixes I would have suggested – except you might also try Digital Rebellion's Compressor Repair.
Finally, take a look at this thread and see whether David's method works for you.
Good luck.
Russ -
Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again, after deautherizing it. HELP ME PLEASE
Hi applerinneedforhelp,
Thanks for visiting Apple Support Communities.
If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Regards,
Jeremy -
Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?
Great, so now I have to airplay it by linking my computer to my Apple TV and then the movie has to buffer! So, all that time I spent downloading the HD video has to technically "download" again by buffering. The more I use Apple TV, the more I feel like this item was not created by Apple. I don't even use it for what I originally purchased it for. If I would have known that anytime I wanted to sync a movie from my computer to Apple TV by using airplay that it would have to buffer the movie, I would have never ever ever ever ever purchased this waste of time device. So the video has to technically play all the way through one time first so Apple TV can "remember" the movie to play it back in real time afterwards.
Am I missing something here? Am I doing something wrong that can be fixing my problem? I should have known that the Apple TV had so many things backwards when simple things like when you are using the remote and you reach the bottom of your list, in order to cycle back to the top of your list you have then press the directional buton back the other way rather than most modern day devices that will automatically cycle you back to the top or to the other side when you reached the bottom or end but keep on pressing the button. That **** annoys me when I am doing a search for a movie and have to type the name in manually and have to cycle back and forth to the letters. It makes me feel like I am using a rotary phone or something!I was told by someone to try and purchase something directly from my Apple TV and that will help authorize my Apple TV. So I picked something that was free and it downloaded.
Then I went back to the Movie that would not work and it played just fine.
So it seemed to work. I will have to try it on other movies and TV shows later. -
Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
Since I installed the new OS X Lion, the iCal syncing through iTunes is not working properly.
When I sync my MacBook Pro with my iPhone and iPad, the events set in both devices (iPhone & iPad) are not transfered to the iCal on my labtop. Events created in both devices are transfered and copied betwen them when I sync them with the iTunes app (through the MacBook Pro) but they are not trasfered/copied into the labtop (iCal). The events created in the iCal (on my MacBook) are tranfered to the devices as two events on same hour. One, with the description created on the iCal, and the other as a New Event (no description). This is happening since I installed the new OS X Lion last week.
I file a report and talked with an Apple Support Representative, but they could not help me. They have not receive any other reports on this matter. Do someone has confronted this issue. I need to find out how to solve this problem.
Regards,
JADHi Sydness,
Thank you very much for your help. It just worked fine. I have 4 macs in my company for 25 years (one is updated each year), and it is the first time I could not solve a problem for weeks. It gave me the opportunity to join this great community.
Charles
Sydness wrote:
I reset my SyncServices and the calendar sync worked perfectly after that.
I followed the instructions found here:
http://support.apple.com/kb/TS1627?viewlocale=en_US
Mac OS 10.7.1 - MacBook -
Why is my Apple ID not working in iTunes or App Store on my iPhone? When I try to buy apps or music it asks for Apple ID so I enter my info and nothing happens. When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account. I do not have this problem with iPad ID is stored and can be used in App Store and iTunes. I have just upgraded to 5c and it's still a problem.
LeesaHeeley wrote:
When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
Good luck. -
i bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working.
I saw cidya aap so i m not sure if it was jailbroken or not before but it is back to normal settings.
My problem started when I tried to sync my music files. I pressed 'sync' all it says is waiting for sync start, preparing to sync and then waiting for the changes to be applied. but it does not sync at all.
I found a way to sync my music files through autofill but I really wanted to sync ringtones but its not syncing and I really wanted to put ringtones in my phone please help.If you see the cidya app, your iPhone is hacked with the cutsie term for this being jailbroken. This also means all the built in security has been removed making the iPhone as insecure as an android device.
Restore the iPhone with iTunes as a new iPhone or not from the backup to get rid of that hacking garbage. If the iPhone has hacked to be unlocked, the iPhone will no longer be unlocked when doing so. -
Cisco 877w - Apple devices not able to see wired apple TV
Hello All,
Can anyone point me to a doc or forum discussion on how to setup the wireless interface to forward multicast packets? Basically I cant get the ipads etc.. to see the AppleTV to control it. I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface. I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
Has anyone got anything more complrehensive I can read?
Thanks
DavidHello David,
Thank you for contacting the Sales Acceleration Center (SAC) regarding your recent inquiry, Case Number
Case Description:
Cisco 877w - Apple devices not able to see wired apple TV
Case Solution:
The Bonjour service uses multicast to advertise your Home Sharing enabled device to the local network. In my case the Cisco 877W I was using had a Layer 3 enabled BVI (Bridged Virtual Interface) to which the Wireless Dot11Radio interface was not fowarding multicast packets properly.
First of all, obtain the Multicast groups your wireless adapter is configured for (on Windows open a command prompt and run the below command):
The result will give you an output as per below, we are interested in the multicast address directly after the 224.0.0.252 address 239.255.255.250:
Then we need to enable multicast routing on the router, connect to your router and enter config terminal mode:
Next we will configure IGMP v3 and add the relevant Wireless interface on your router to the correct multicast address group:
Next perform the same config your BVI interface:
Once complete save your changes and confirm both interfaces have been added to the multicast groups using the command sh ip igmp group:
You now need to reload your router and restart iTunes and then attempt to connect to Home Sharing from your Apple TV.
Other commands that I used to troubleshoot with were:
debug ip mpacket - Multicast Packet Debugging
debug ip mroute - Debug Multicast Routing
sh ip mroute - Show IP Multicast Routes
By default the Cisco implementation of a Dot11Radio interface and a BVI interface don't appear to forward multicast packets between each other. Seems odd to me as they're both in the same L2 bridging group..anyway.
I am going to close the case for this specific inquiry on my side. If you need moere information Please feel free to reach out to me or any member of the SAC team if we can be of any further assistance or if you have any other related questions in the future. We strive to provide you with excellent service. We value your input and look forward to serving you moving forward. -
apple tv not working - message NO SIGNAL for this plasma. Was working before. Major difference a download from itunes 4 g movie yesterday. I have tried rebooting the apple device more than once. Switched off all plugs,checked all plug positions. Can anybody help please? Australia. Maggie.APple tv oroblem
Good morning Winston.
thanks.
i eventually found a one-liner in THE APPLE MANUAL which fixed it.
i.e. Resetting the APPLE TV. The instruction was to use the silver small operating APPLE device,
HOLD DOWN THE MENU BUTTON AT THE SAME TIME AS THE BLACK DOWN BUTTON UNTIL THE WHITE LIGHT ON THE APPLE TV STARTED BLINKING RAPID WHICH IT DID. I then released the pressure ON THE BUTTONS and within a few moments, the TV screen cleared and it started working again.
The interesting part is that I had thought a reset of the APPLE TV may have taken place when it was unplugged. BUT NO IT DID NOT.
Also, there was much helpful comment in the forums but not this simple solution which I found ON the WEBSITE APPLE MANUAL.
HOPE THE ABOVE IS CLEAR ENOUGH TO HELP OTHERS. Maggie 3/1/2015 -
Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!
iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
Computers are not airplay compatible unless you have downloaded an app to make them so.
User to user forum, so I don't care if you switch to android or any other threats you make. -
Apple tv not working asking to hook up to usb
apple tv not working. asking to hook up usb.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source List
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Apple password not working in iCloud since I updates my email address. Still lists my old email but doesn't accept old password. How do I access the cloud?
To change the iCloud ID ("email") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
Iphone 4S will not charge, error that USB device not working, found any suggestions?
iphone 4S will not charge, error that USB device not working, found any suggestions?
Hello Chambless,
The troubleshooting steps below can help get your iPhone to charge.
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Allen -
My Apple remote is not working with my MacBook. The Mac OS X 10.5 Help Knowledge Base says to go to Security > Systems > and Disable remote control infrared receiver. I don't have a systems button or box nor the checkbox to Disable remote control infrared receiver. And, my MacBook has an infrared receiver.
Hi Focus,
I have the same problem. When I update from TIger to Leopard the front row apple remote still working. But is been a long time the last time i used and now on 10.5.2 osx the apple remote not working as I imagine.
I read some answers that help me understand better the problem. My check box of "disable remote.."is unchecked and I saw a "pair" button and try to pair with my apple remote. The tips told me to HOLD "menu" and "next" buttons of apple remote to pair him with computer. And Works fine. So I try to push only Menu button (as I've done so many times on tiger) but still does not working. So I realize the command to "start front row from apple remote" now on Leopard 10.5.2 is MENU+NEXT buttons and does not anymore only menu button. For me works like this.
While I write this answer I try again push and hold only MENU button and after almost 2 or 3 seconds holding button appears on screen an virtual image of my apple remote signaling to replace the battery, may be now will be works only on push menu, but I need to change the battery first.
I hope help somebody. -
Apple remote not working, is there a way to setup Apple TV without the remote
Apple remote not working, is there a way to setup Apple TV without the remote
Welcome to the Apple Community Sylvia.
There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.
Maybe you are looking for
-
Mobile Applications folder missing
Hello everyone, I am trying to acces files, which are supposed to be located inside the "Mobile Applications" folder, which should be located at C:\Users\<username>\Music\iTunes\iTunes Media. However, this folder is missing. The only things that are
-
I recently when to England. When I returned to the US, my iPhone 5 wouldn't find the 4G network. I've tried restoring network settings, I've tried hard resets. I finally wiped the phone, and now, it won't let me restore anything. I'm kind of stuc
-
HT4796 where are the migrated files located on my mac? i can't find them!
I am migrating from my PC to new Macbook Pro using Windows Migration Assistant. I can't locate my files on my Mac; not in photos or music or documents! Please help!
-
Perl adcfgclone.pl dbTier fails on control file creation
Hi Guys, Platform is : Linux 5 DB: 11.1.0.7 R12.1.1 I have a temp file that had been removed at the OS level.. on the source And I want to updated the control file regarding this so that it does not record this file any more. I am using rapid clone (
-
Hi Experts, Am i right to say that when a new Purchase order is created, there can be no change log? Am i right to say that not any field change in purchase order will result in change log? best regards Pascal