FPINTM1 - Interest calculation on different types of items

We need to separate or differentiate the interest and posting them using 3 differerent subtransactions as they need to be identified separately. This is because the nature of the items the interest is calculated on are different. So far the system is using the internal transaction of 0040 (Main trans) and 0030 (subtransaction) and we have mapped it to an external transaction. But this appears to be the only option available currently. Is there a way to get the system to differentiate the interest into 3 different subtransactions depending on the nature of the item? Will using different interest key at item level help? Thanks.

I had a look at the table V_TFKIVV where the internal transactions are stored. So far only the single main transaction 0040 and subtrans 0030 is used for interest calculation in FPI1 and FPINTM1. We need to pay 3 types of interest and indentify them separately depending on the types of items (they have  3 different subtransactions) the interest in calculated on. So far our tests shows that interest on using FPINTM is consolidated under the main trans 0040 and subtrans 0030. Is it possible to split the interest up into 3  the different types or subtrans?
Eg, we have 3 types of receipts where we have to pay interest on, they are employer contribution, employee contribution and adhoc contribution. We need to calculate interest on these 3 types of contributions. Trans FPINTM1 consolidates interest for these 3 types into main trans 0040 and sub trans 0030 ie, only one type of interest and therefore one GL account. Is it possible to split the interest  into the 3 different types, perhaps into different subtrans to differentiate them? Thanks.

Similar Messages

  • Dunning (Want to add interest calculation on unpaid invoices (open items)

    We have a requirement in dunning program. we would like to add interest calculation on unpaid invoices (open items) to our dunning letters. This interest should be not posted, but calculated only for information purposes. At this moment we can calculate interest only on cleared items.
    anyone has any idea about this ? what possibilities are there in SAP for this requirement?
    Thanks,
    Naveen

    Hello Vimal ,
    I want to understand we have setting in Dunning FBMP and OB42. if i will set the interest in OB42 and Select the interest indicator in FBMP.! the interest will be calculated for open items and no posting will be done in customer A/c?
    Will you please elobrate about the setting that will be required to do the setting as per the requirement.
    Thanks,
    Naveen
    Edited by: Naveen.Rana on May 26, 2011 9:22 AM

  • Interest calculation on overdue customer open items

    Hi.
    I need to calculate the interest on the customer overdue open items. for that i have configured the following steps.
    OB46 - Interest Settlement Calculation Type
    OB82 - Interest Terms 
    OBAC - Define Reference Interest Rates 
    OB83 - Enter the Reference Interest Rates Value 
    OB81 - Define Time Dependent Terms 
    OBV1 - Prepare Interest on Arrears Calculation
    I have assigned the interest inidicator in the customer master record.
    Now when i run the interest calculation using FINT, it is giving me the error " Problem class very  important" and showing as "No records selected".
    Can anyone help me in this issue.
    Regards,
    Padmavathi

    Dear Mauri,
    Now i got the issue solved.
    In the step Prepare item interest calculation, i have given the ref date as 3 - positng date so only system is not picking the open items.
    Now i changed it to 4 - Payment baseline date. its done.
    Thanks.
    Regards,
    Padmavathi

  • Interest Calculation on only future Open items

    Hi,
    We are adopting the interest calculation functionality, we do not want to calculate interest on past open items, i.e, if we go-live on 15.06.08 we do not want to calculate interest on open customer items before this date. We want to calculate interest for all future open items after 15.06.08.
    Does anybody has any answer for this. Can you please guide me in this.
    Thanks,
    Srini

    Hi,
    While creating reference interest indicators give the calulation from date (your required date). Then the system will calculate from date whatever you have mentioned.
    Assign Points if useful
    Regards
    Ravindra

  • Customer interest calculation on both open & cleared items

    Hi,
    I have created a Interest Calculator Indicator Z1 for that following configuration is made.
    1. Int Global Settings> Prepare Interest on Arrears Calculation-> Z1 under selection of items I have selected the open & cleared items.
    2. Int Global Settings> Prepare Item Interest Calculation-> Z1 under items selection I have selected the open items & all cleared items.
    But when I am running the FINT - Interest Calculation for customer selecting the Interest Indicator Z1 system is calculating only open items but in configuration I have selected both open and all cleared items. Still its considering only open items.
    Kindly provide the way to resolve this problem.
    Regards,
    Sandeep

    Thanks Chintan for immediate reply...
    I have check the solution given by you but not a single cleared document is not considering in FINT. I have one case like I have  posted one entry on 01.10.2010 & one same day I have reversed I need that entry should come in the same calculation. This will not effect in amount as it will get plus minus zero.
    Regards,
    Sandeep

  • Open Item interest calculation with different exchange rate for each line

    Dear All
    We have a short term loan facility with our Bank. We take short term loan with bank on different terms and condition. Now user has requirement to have different interest rate for each open items depending on the posting date or any other condition. I think in SAP for one bank account only one rate is applicate for validity from date.
    Can someone share his/her experience if got the same requirement from user
    Thanks and Best Regards
    Farhan Qaiser

    Dear Ashwin,
    As of overdue days are concerned there is no standard functionality available whereas there is for amount.
    Better solution is that you get an ABAPer create your own functional module. That will help you in better way.

  • Interest calculation on vendor's due line items

    Hi Experts,
    Kindly help ne to configure Interest calculation on SME types of  vendor's  line items which are due for payment.
    Regards,
    Kuldeep Dubey

    Dear Ashok,
    thnks, pts assigned, but prob not solved.
    <u><b>if possible pl give the entire steps for me to check & may be 1 scenario</b></u>
    the present scenario is that i have posted vendor invoices in apr'06 , maintained vendor master, vendor not paid so far , running f.4b, selecting all relevnt fields, like calclation dt upto 30/4/06, interest posting dt to be 30/4/06, period  -1, print form - printer lp01 etc etc.
    Rgs
    Vinod

  • Interest Calculation Item wise - different rates

    Hi Experts,
    My client has following requirement to calculate interest on due customer invoices as follows .
    Rate 18% on From the payments dates from 80 to 90 days
    Rate 20% on from the Payment dated from Over 90 days
    My problem is how to assign different  interest rates on different due date slabs.
    Please help on this.

    Dear,
    as far as I know this is not possible into SAP Standard System.
    You can define two interest indicators and then use the first for some filtered documents and then change the customer master data and use the second for the other relevant fi documents.
    I hope this can help.
    mauri

  • Interest calculation type-Z-Penalty Interest Calculation

    Hi all !!
    I would like to know  about the Interest calculation type-Z-Penalty Interest Calculation, if  it is necesary to do some aditional customizing , and which are the differences between Item Interest Calculation and Penalty Interest Calculation.
    Best regards and thanks all

    Thanks Chandra,
    Could you give us some links where we can find more info of how to configure/run this specific issue of calculate interest on interest and other aspects of penalty interest calculation.
    The other point if it is possible or there is a way to depending on open items for a same vendor have a different interest indicator, I mean something like a field at the financial document in order to choose between different type of interest indicators.
    Best regards and thanks

  • Interest calculation on Open items and cleared items

    Dear Experts
    I am trying to do needful configuration for interest indicator on which interest can be calculated for open items and cleared items as well.  But,  system is calculating interest for open items properly, but not calculating interest on cleared items with same interest indicator,  I am repeatedly getting error "interest calculation indicator is not compatible with this type of interest calculation"
    Is it possible to use same interest indicator for open line items and cleared line items of customer?
    If possible, request you share the needful config steps to do same.
    points will be awarded for usful reply.
    Best regards,
    S. Habib Pasha.

    Hello Habib,
    depending on the requests you can setup a item interest calculation or a balance interest calculation "Define calculation types".
    IIC: check settings (item selection, all cleared items, only items with payment, no cleared items) "Prepare item interest calculation"
    I guess you have setup the item interest calculation - maybe you have mixed some entries with BAIC.
    Check in "Prepare account balance interest calculation" whether you have entries with the indicator you want to use.
    At least check your entries in "Define time-based Terms" If you have entries with Balance account interest calculation the system gives even an error.
    Hope this is helpfull.
    Best regards
       Horst

  • Interest calculated on items not yet due

    Hi,
    We have open item/document with posting date and baseline date of August 15, 2009. Payment terms attached is 30PD meaning open item is due on September 15, 2009. Interest Indicator attached to the is item interest with the following configuration:
       Item Selection All cleared items
       Interest determination  - Ref date is 4 which is payment baseline date
       Calender Type is G - 28, 31/365
       Tolerance days 15 meaning even if the payment tems attached to the customer is 07FM and the customer paid on the 8th, interest will still not be computed. Computation of interest will happen in the customer paid beyond the 15th.
       Calculation of interest is on debit items only
    When i post the interest on August 31, interest was computed with the document i mentioned above. Taking into consideration our config for interest, interest should still not be computed since open items will be due on Sept. 15.
    Or our configuration conflicting with the payment terms?
    This only happen on our PD payment tems and not on FM.
    Thank you.
    Rachelle

    Try updating the vault and see if Aperture keeps saying that.
    Eduardo
    Based on your advice, I created a vault, updated it, and the splash page message dissappeared on restart - just as you suggested it might. Thanks!
    Am I right in believing the contents of the vault together with my separate backup of the referenced files themselves will enable me to recover my Aperture environment in the event I need to recover it following the loss of my 'live' system? That would be a very acceptable outcome.

  • ITEM INTEREST CALCULATION ON VENDOR AND CUSTOMER

    Dear all,
    how to calculate Item interest calculation on Vendors and customers
    what is the configuration need? please let me know it is very needful for me
    Thanks in advance.
    Regards,
      Ram.

    in ob46 we maintain int calculation types under that u can maitain int indicatro name int calculation type(P)and save
    after that u can prepare itme balance interest calculation(path spro/f/a/ap&ar/business transactions/int calculation/int calculation global settings/prepare item int calculation) here
    u can enter int indicator select open itmes check box enter calander type etc.
    define referance itn rates obac here u can enter ref int rate long text short text date from currency and save
    define time dependent terms ob81 here u can enter int indicator currency effective from sequential number term(u can select item int calculation) ref address rate etc.
    enter int values ob83 here u can enter reference int indicator from date and percentage save.
    if u have any doubt let me know.

  • Item Interest Calculation for partially cleared items

    Hi
    We need to do interest calculation on Customer Line Items. The T Code we are using is FINT. We have set an interest indicator for Item Interest Calculation, with Interest Calculation based on Items Cleared with Payments. The requirement is that Interest should be calculated on even partially cleared items. Suppose a customer invoice is generated on 1.1.2009 for INR 100000 and becomes due for payment on 30.1.2009. Now on 10.2.2009, a partial payment is recieved against this invoice for INR 30000. System should calculate interest on INR 30000 for 11 days. Now again on 20.2.2009, remaining payment of INR 70000 is recieved. In such a case, interest should be calculated on INR 70000 for 21 days @ 1.25% PM. In the current configuration, when we define that system should calculate interest on Open Items cleared with payments, system calculates interest on INR 100000 for 1.25% for 21 days. Pls suggest.
    Regards
    Sanil Bhandari

    Hi u can check all below steps with specific fields i thought it is working perfectly check it.
    1. Define Interest Calculation Types
    here u can enter int rate type as a "S" Balance interest calculation
    2. Prepare Account Balance Interest Calculation
    here u can enter int calculation frequency means monthly or quarterly etc. calander type G, select balance plu int check box
    3. Define Reference Interest Rates
    Here u can enter date currency
    4.  Define Time-Dependent Terms
    here u can enter currency effective from date sequential number term (Debit interest: balance interest calc. or Credit interest: balance interest calc.) referance int rate enter before step what u r defined that one u can enter here.
    5. Enter Interest Values
    here u can enter interest rate for that referance int type
    6. Prepare G/L Account Balance Interest Calculation
    Here u can enter ur g/l accounts
    0001            Interest received (int received a/c)
    0002            Interest paid      (int paid a/c)
    0011            Pt vl.min.int.earned(int received a/c)
    0012            Pst vl.min.int.paid(int paid a/c)
    0013            Pst vl.dt.int.earned(int received a/c)
    0014            Past val.dt.int.paid(int paid a/c)
    0015            Calc.per.int.earned(int received a/c)
    0016            Calc.period int.paid(int paid a/c)
    1000            G/L account (earned)(Loan giving a/c)
    2000            G/L account (paid) (Loan taking a/c)
    after that u can post transaction  execute ur transaction code i thought it is helpful for u
    Regards,
    Nauma.

  • What is debit and credit, open item interest calculation??

    Dear Members,
    What is
    1. Debit Interest Calculation?
    2. Credit Interest Calculation?
    3. Open and Cleard Item Interest Calculation?

    Hi...
    Interest can be calculated on debit balance or credit balance based on AR or AP..
    There are two defined interest calculation types in the SAP
    system.
    1. Balance interest calculation.
    2. Item interest calculation.
    System defined variant for balance interest calculation type
    is u2018Su2019 and item interest calculation type is u2018Pu2019. Balance
    interest type calculation is used for G L Accounts. Item
    interest type calculation is used for vendors and customers.
    Hope you are clear...
    Good Luck!!!
    Lucid-Mind...

  • Item interest calculation in General Ledger Accounting

    HI All,
    we want to calculate interest for each deposit wise these
    deposits have different openings dates and maturity dates
    and different interest ratess  we want interest each deposit
    wise but GL code is one for different deposits Ex: FD ICICI
    Account normally we can  calculate  interest on GL Account  balances
    is it possible to calculate item interest calculation in GL
    accounting as like AR and AP
    can any body suggest solution for this requirement
    Regards
    Madhava rao
    SAP FI.CO consultant
    Mob:09909992228

    HI any body knows how to calculate interest for each deposit wise these deposits have different openings dates and maturity dates and we have only one GL master record for different deposits we want item interest calculation in General ledger aaccounting can any body suggest this query
    Regards
    Madhava rao
    SAP FI.CO consultant

Maybe you are looking for

  • How can i get currency values from flatfile to function module

    Dear All,            I have to take  currency values from flat file and i have to assign those flat file value to function module . Eg: "Convert_to_local_currency".  I need technical code how to calculate those amount in work area and how to assign t

  • Can't password protect documents

    A year ago I bought a  license for Adobe Acrobat Standard which included access to certain features including the ability to password protect documents.  Suddenly it has stopped working.  I have already re-downloaded my product version and that has n

  • Lost files, can't find them but they're there!

    all my files have disappeared from my powerbook g4 but the memory use implies they're still there on pcs in the past it's been possible to turn the clock back so to speak and restore the computer to it's state at a previous date, ie you mess somethin

  • Can I change exif metadata with AIR?

    Hi. I am autor of a simple application that changes exif information in scanned images. I am looking for a way of re-implementing the application in a more cross platform way than it is today and found AIR interresting. However, I can not find any AP

  • Photoshop CS6 interface and canvas buggy after upgrading to 10.8 on Retina MBP

    An image says more than 1000 words.. In case you can't notice, the lower part of the layer panel isn't appearing, so I can't create new layers, etc.