FPY1 FKK_ID 31 The latest prenot. for bank details ID 0001 of BP is inactive

Hi Guru
I am getting this error, while running FPY1. I followed the stardard SAP solution for FICA and AUDDIS integration. (Prenotifications - Country-Specific Functions - SAP Library) . Can anyone advise me please, what i need to do in order to below correct error. Please i need to do it ASAP, i would apprecitate if some give me the quick Answer. Thank you
Regards
Ram
FKK_ID
31
The latest prenot. for bank details ID 0001 of BP 0000409333 / 000001000477 is inactive

In BP check the bank data exists in payment transactions tab and in contract account the same data should be present.

Similar Messages

EDI-IDOC: want to generate Reference Specifications for Bank Details field

Hi Guru,
We are running to the situation that we use EDI with China vendor (using China bank account). The bank account for China has greater than 18 characters which is the maximum limit for bank account field. Based on note 96624, we are suggested to maintain the exceeding amount into the "Reference Specifications for Bank Details" field. However, when I run the payment on F110, IDOC do not generate the reference field.
How can the bank reference field be included in the IDOC?
Thanks,
Song

Hi Auro,
You use use EDI_DC-SNDSAD field, currently this field is used no where.
If you not sure where to see double control record and click address info tab
you can use either field receiver or sender.
For testing use WE19 transaction and pass your paymethod to following field
and then inform to EDI Mapper that your sending paymethod in this field.
For them this field is very easy to grab.
Let me know if you any concern.
Thanks,
Narayan

BT asking for bank details over the phone

On Friday evening I received a call from someone saying they were from Bt.
The caller said my bill hadnt been paid and if I didnt pay it now my service would be suspended, (I was moved from quarterly billing to monthly and my direct debit had been cancelled an was now whole bill payment monthly).
When I asked where the caller was from he said the Philipines, alarm bells started ringing. I asked to speak to someone in the UK and was told I could not be transferred, I then asked for someone in the Uk to call me, again I was told it wasnt possible as they had no contact with the UK.
A call from someone asking for bank details immediately makes me suspicious, (theres lots of scams out there).
Why is it not possible to speak to someone in th UK?
Bob

If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to help you.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Hi can anyone help my gf try to sign in to her iPhone 3 in the app store and when she put stuff in they ask for bank details and security what do that mean

hi can anyone help my gf got iPhone 3 and she did and id but when she put it in to login it ask for bank details and security code what do that mean

That means you input your billing information. And the security code is the three digit code ont he back of your credit card.

How to select the latest date for a field in CR?

Dear all expert.
I need to develop a report where it only show the latest date. For example, I had a report, it contain a customer description and bussiness transaction posting date.
Customer description           BT posting Date
A                                          03/10/2010
A                                          15/10/2010
A                                          23/11/2010
A                                          24/12/2010
A                                          30/12/2010
A                                          15/02/2011
A                                           20/03/2011
B                                           20/03/2011
B                                           02/04/2011
B                                           08/04/2011
B                                           11/04/2011
But in CR, i Just wan it to show me:
Customer description          BT posting Date
A                                         20/03/2011
B                                         11/04/2011
I just want to show customer with the latest BT posting Date, How can I do that?
Thank You.

Hi Alex,
If you want to show the data only in Detail other than group then you may follow the following :
--Create a group on Curstomer Descripton
--Createa fromula : Maximum(,)
--Go in Section Expert -- suppress condition -- then give a condition like :
<> Maximum(,) // 'not equal'
This will suppress other dates and give you the latest date on your detail.
Thanks,
Sastry

Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

Sorry, but no help is possible. You can only use the UAE iTunes Store, and Apple can only offer what content they are able to license for sale in that country. You'll have to look elsewhere for content. Whether there are any other download stores able to sell in the UAE I don't know. You may need to purchased CDs and import them into iTunes.
Regards.

Link for bank details not appearing

Hi Experts,
I am configuring ESS 6.0, EP7.0, but i am facing strange problem.
In ESS if I attach a ESS user to any indian employee then i am not able to see link for bank details whereas if i attach the same user to US employee then link appears.
Could anybody help me in this case.
Thanks
Sa,eer

Sameer
Bank Details is Country Specific,Check in Home Page Framework whether bank service is assigned for India.
Transaction SPRO
Personnel Management>ESS>Homepage for Self Service>Service.Define Country Specific Service...
Award points if helpful
Regards
Sarath

Infotype for Bank details not highlighted even though user has access

Even though a user has Bank details maintain role with P_PERNR object's authorisation field as R and W, in his PA20 - Personnel data tab - In infotype text- for Bank details there is no tick / correct mark. Doesnt the tick mark depend on all the authorisations that a user has or can perform? Please help me to understand it clearly

Thanks for the input, I just want to clarify one more point that the user i am reffering to is an old user and his details such as bank information should have been maintained. But in this case the user / HR has not maintained it and once it is maintained it will show as tick mark is it ?

I installed the latest update for acrobat xI and acrobat stopped working

I installed the latest update for acrobat xI and acrobat stopped working

Hi,
Would you please elaborate about your problem, please provide the following details:
Which Acrobat flavor ( Pro , Std) are you using and what is your OS ? Does it gives any error message on launch?
Please try repairing the Acrobat installation from Add and Remove Programs.
Thanks.

I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable

I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable

That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
iTunes: Restoring iOS software - Support - Apple

I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going?

I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going? Do I miss something?
Best regards,
Michele

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I am trying to download adobe reader for my macbook air but it keeps stopping at 44%. I have downloaded the latest updates for my mac and retried numerous times. Please advise. Thank you

I am trying to download adobe reader for my macbook air but it keeps stopping at 44%. I have downloaded the latest updates for my mac and retried numerous times. Please advise. Thank you

As posted about a dozen times every day, try the offline installer from http://get.adobe.com/reader/enterprise/

Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)

Hi all,
I have TFS2012 and run several projects.
We encounterwed with such an error while using Build server.
Overall Build Process
Initial Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
00:00
Get the Build
00:00
Update Build Number
Initial Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Final Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Result = Ephone_DIT_Deploy_20150424.1
01:56
Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
Initial Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
00:00
Get the Build Directory
Initial Property Values
Result = d:\temp\217\CTI\Ephone_DIT_Deploy
01:53
If Not String.IsNullOrEmpty(ConfigurationFolderPath)
Initial Property Values
Condition = True
01:53
Run TfsBuild for Configuration Folder
Initial Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp"
00:08
Getting sources
00:02
Labeling sources
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
00:19
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:10
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
MSBuild Log File
00:08
Generating list of changesets
00:20
Built Skins\SkinEPhone.cs for default targets.
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
00:03
Creating work item
Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
Exception Stack Trace: at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Final Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
Final Property Values
Condition = True
Final Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
Final Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
Please have a look and guide where to find a problem
Thanks ahead

Hi Hooi,
I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
Best regards,

I installed the latest update for itunes on my windows vista machine, and now itunes wont open at all

could you give me a hand? i downloaded the latest update for i tunes, and now im facked. i cannot open itunes. ive deleted and uploaded the new one as it says to in the 'support' section, all to no avail.

Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

I have an iPad 1 and after I got the latest update for keynote and Now it crashes every time I try to open it

I have an iPad 1 and after I got the latest update for keynote and Now it crashes every time I try to open it

Do you have iOS 5.1.1 on your original iPad? If not update the iOS.
You might also try quitting the app and then reset the pad.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Still no joy? Delete the Keynote app, reset the iPad and then reinstall Keynote. You will not have to pay for downloading it again.

FPY1 FKK_ID 31 The latest prenot. for bank details ID 0001 of BP is inactive

Similar Messages

Maybe you are looking for