FR error:  *Error: invalid report object*

Hi All,
When we run the report we are getting error "*Error: invalid report object*. It is for one specific entity at the base level for some user's. Other user's can able to view the data at that leve. All the user's have same level of access. can someone help......
Thanks in advance.
Moh

You are most likely getting this error because you have a report object trying to reference a value out of a datagrid or a POV that doesn't have any data for the given entity.
When you run it for an entity with data in the grid, everything works great. When you run it for an entity with no data, the datagrid essentially doesn't exist and references to it will fail with the error you have shown.
A good example of this is when you have a header and you pull parts of the header from a grid such as showing the scenario, etc. To do this you reference a row (or column) from the datagrid, etc.....
Charles

Similar Messages

  • Error "Invalid Report Object" when running any CR

    Hi, I have installed BO XI V3.1 and upgraded to 1.4 level.
    However when logged into the infoview app, if i browse to any 2008 report i have uploaded into the enterprise system and double click to run i get the error "Invalid Report Object".
    This is also true if i try to run any report in the Public Folders \ Report Samples folder.
    Nothing will display for me but they run fine in CR 2008, just not via the web tool.
    Any help on this will be much appreciated.
    C.

    Hi,
    Is this issue after you have upgraded to 1.4 or was this issue occurring before?
    Since the reports are running properly in the designer please try to do following steps:-
    1)  Open the report in the designer which is not working in enterprise
    2)  Refresh the report in CR designer
    3)  Save the report back to the enterprise and make sure save with data is checked.
    4)  Now open the report in the Enterprise and check it works or not.
    The reason of doing this is that to generate new PID's for the reports if after the upgrade the PID's have changed or has became corrupt.

  • Error Occurred creating Report Object: ActiveX component can't create objec

    Hello!
    I have an error "Error Occurred creating Report Object: ActiveX component can't create object" when open asp-file in IE. Please, help me! What Java-components I need install? What else?
    Server side: Windows 2003 SP2, IIS6, Crystal Reports Server XI
    Client side: Windows XP SP3, IE 7.0

    <%@ LANGUAGE="VBSCRIPT" %>
    <%
    ServerName="app4-odusb-bur"     
    DatabaseName="CKReports"
    WorkLogin="***"          
    WorkPWD="***"
    reportname = "SV3in1_p1.rpt"
    If Not IsObject (session("oApp")) Then                             
    Set session("oApp") = Server.CreateObject("CrystalRuntime.Application.11")
    End If                                                               
    Path = Request.ServerVariables("PATH_TRANSLATED")                    
    While (Right(Path, 1) <> "\" And Len(Path) <> 0)                     
    iLen = Len(Path) - 1                                                 
    Path = Left(Path, iLen)                                              
    Wend                                                                               
    If IsObject(session("oRpt")) then
         Set session("oRpt") = nothing
    End if                                                   
    On error resume next
    rYear = Request.Form("rYear")
    rDay = Request.Form("rDay")
    rMonth = Request.Form("rMonth")
    sDay = CStr(rDay)
    if CInt(rDay)<10 then sDay="0"+SDay
    sMonth = CStr(rMonth)
    if CInt(rMonth)<10 then sMonth="0"+sMonth
    sYear = CStr(rYear)
    Set obj = CreateObject("ReportServer.Collector") 'HERE an ERROR was occurred, so I have closed any other operators after this one, except Error Message Operators
    'obj.ConnectToDatabase1 ServerName, DatabaseName, WorkLogin, WorkPWD
    'obj.Disconnect
    'Set session("oRpt") = session("oApp").OpenReport(path & reportname, 1)
    'Session("oRpt").Database.LogOnServer "p2ssql.dll", CStr(ServerName), CStr(DatabaseName), CStr(WorkLogin), CStr(WorkPWD)
    'For n = 1 to Session("oRpt").Database.Tables.Count
    '    Session("oRpt").Database.Tables.Item(n).SetLogonInfo CStr(ServerName), CStr(DatabaseName), CStr(WorkLogin), CStr(WorkPWD)
    'Next
    If Err.Number <> 0 Then
      Response.Write "Error Occurred creating Report Object: " & Err.Description
      Set Session("oRpt") = nothing
      Set Session("oApp") = nothing
      Session.Abandon
      Response.End
    End If
    %>

  • Is there a way to change the *Error: invalid report object* error message?

    Well as you know if there is no data in a report, you get the above message. I was wondering if there is a way to replace this with another message, such as "there is no data for the criteria requested"?
    Thanks a lot.
    WC

    Hi Cashmoneydonuts,
    You can create an animation for this using Edge Animate, and add it to Muse.
    The following link might be helpful:
    Liven up Adobe Muse CC sites with animated effects | Adobe Inspire Magazine
    Regards
    Sonam

  • Error Msg "Invalid Com Object Exception is output"

    Hi,
    The following error message was output when I tried to perform an
    optimization on the Finance Application.
    "An unhandled exception has occurred in your application....COM object
    that has been separated from its underlying RCW cannot be used".
    However, when my colleague perform the same optimization using her PC, it was ok. Please advise if there are any specific settings that are I need to set at the client or desktop level in order to avoid the error.
    Cheers
    Hon Leong

    Hi,
    My notebook is on Windows XP and Office 2007. As per your suggestion, I have run the client diagnostic program and found the following error:
    [Internet Explorer Option setting]
      Proxy server
        No proxy setting
      Use HTTP 1.1
        Required: True
        Currently: True
        Status: OK
      Enable Integrated Windows Authentication
        Required: False
        Currently: True
        Status: Error
    Would you be able to advise how I can disable the Integrated Windows Authentication so that I can see the problem is due to the above error.
    Cheers
    Hon Leong

  • Invalid DataStore object name error when running process chain after EHP1

    Hello,
    We recently upgraded our BW Dev platform to NW7.01 EHP1 SP6. I noticed that the layout for "Delete PSA Request" process in the Process Chain has changed after the upgrade. We can no longer specify the actual PSA table to delete eg, /BIC/B0001645. Instead we need to specify the Datasource name and the Source System.
    Now after the upgrade when I run one of my process chains, it fails at "Delete PSA Request" step with error message "Invalid DataStore object name /BIC/B0001645: Reason: No  valid entry in table RSTS". This datasource is based on the flat file source system and the PSA table for this Datasource is /BIC/B0001653.
    Unfortunately the process chain is picking up an older PSA table for this datasource and there is no way for me to specify the current PSA table name after this change in layout with EHP1 upgrade. Any suggestions on how to resolve this issue.
    Many Thanks,
    Al

    Hi,
    Please implement OSS 1345331.
    If this does not help try the below steps:
    1.  Run the report 'RSAR_PSA_CLEANUP_DIRECTORY/_MS' in check mode for a 
           particular PSA table for finding the inconsistencies.
    2.   After that please analyze the logs and if there is any problems related to partition, you need to correct them using the report u2013
    3.  'SAP_PSA_PARTNO_CORRECT' in repair mode for the
          PSA tables.  Run the report again after this
    4.  'RSR_PSA_CLEANUP_DIRECTORY/_MS' in check mode to 
         double check that the invalid partitions are 
         corrected.
         Once this is done you can execute the report     
         'RSR_PSA_CLEANUP_DIRECTORY/_MS' in repair mode.
    -Vikram

  • Error while running report 10g

    DECLARE
         repid REPORT_OBJECT;
         v_rep VARCHAR2(1000);
    rep_status VARCHAR2(2000);
    BEGIN      
         repid := find_report_object('REPORT2');      
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
    set_report_object_property(repid, report_comm_mode, 1);
    set_report_object_property(repid, report_destype, cache);
    set_report_object_property(repid, report_desformat, 'PDF');
    set_report_object_property(repid, report_server, 'myserver');
    v_rep := run_report_object(repid);
    rep_status := report_object_status(v_rep);
    WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
    LOOP
    rep_status := report_object_status(v_rep);
    END LOOP;
    message(rep_status);
    IF rep_status = 'FINISHED'
    THEN
    web.show_document('http://localhost:8889/reports/rwservlet/showjobid' || substr(v_rep, instr(v_rep, '_', -1) + 1)
    || '?server = myserver');
    ELSE
    message('error while running reports-object ' || error_text);
    message(' ');
    clear_message;
    END IF;
    EXCEPTION
         WHEN OTHERS THEN
    message('error while running reports-object' || error_text );
    END;
    I have been trying the whole 5 days running this report but it is giving me error, i am making simple report which select all data and display from emp table, please help. Error I am getting is unable to run the report and Terminated_Report.

    Hi,
    Check this link...How to call a report in Forms 10g ?
    Hope this works...
    Hamid

  • Invalid Report File Path (URGENT)

    Post Author: a_Mohammad
    CA Forum: Publishing
    Im using CR which came as a bundle with VS2005. I deployed my ASP.NET project on online server. Sometimes, When users try to load the reports, they got an error says "Invalid Report File Path" appears at the top of the report, and no data shown. If i reset the IIS, it return to work fine again.
    Usually i got this error when there is a lot of hits on the server and reports..
    Can you plz advice on that???
    Thx in Advance

    Hello Shweta,
                       Thanks for responding.  I load the report using the Report.Load(Filepath) command.  The reports are located on a seperate machine within the network.  The error occurs after the form has been loaded, parameters have been determined and margins have been set, but before the report actually gets displayed on the screen.
    Here is the last breakpoint I can find before the error occurs.
    Private Sub _RptLoad(ByVal sender As Object, ByVal e As System.EventArgs)
            If (ReportDoc.HasSavedData) Then
                Me.Close()
                Me.DialogResult = DialogResult.Cancel
            End If
            AddHandler BTNApply.Click, AddressOf _ApplyNewMargins
            AddHandler BTNSave.Click, AddressOf _SaveNewMarginOffsets
            AddHandler UNELeft.ValueChanged, AddressOf _AnyOffsetChanged
            AddHandler UNETop.ValueChanged, AddressOf _AnyOffsetChanged
            AddHandler UNEBottom.ValueChanged, AddressOf _AnyOffsetChanged
            AddHandler UNERight.ValueChanged, AddressOf _AnyOffsetChanged
            Me.BTNApply.Enabled = False
            Me.BTNSave.Enabled = False
            RaiseEvent ReportLoaded(Me, Nothing)
        End Sub
    Everything here runs fine, but if I F11 from the END SUB I get the error and cannot figure out where its going from there or what's throwing the error.
    Thank you for your time,
    Dennis

  • Invalid tincan object name

    I am trying to stream video from a Flash Media Server using
    AS3. I am getting an error that I cannot figure out. In my
    NetStatusEventHandler I am getting event code
    "NetStream.Play.Failed". The error is: "Invalid tincan object name
    (stream ID: 1)" This means absolutely nothing to me and I have been
    unable to find any documentation on the meaning of this error.
    ISSUE RESOLVED: I was including the filename in the
    netconnection.connect method's URI
    NOTE: I have also posted this in the Flash Media Server forum
    as I was unsure where this question best fit.

    Glad that you figured it out. Here are a couple of things
    that could help in the future. It would have helped if you had
    posted the code you were using. Somebody would probably have seen
    something like that right off.
    The other thing is that it is helpful if you don't edit
    posts, but rather make a new one. Folks who use Newsreaders on the
    forum don't see the edits.

  • Invalid DataStore object name /BIC/B0005712

    Hi Frnds,
    I was trying to execute a PSA deletion step on one Datasource. In that process I got the below error.
    Error msg: Invalid DataStore object name /BIC/B0005712: Reason: No valid entry in table RSTS.
    Do, I need to maintain anything related to this Datasource in the table RSTS. if so....what it could be ?
    Or Do we have any other solution ?
    Thank you.
    NGR.

    Hi,
    In my case,
    Inspite of going through several valid NOTES & program, my issue didnt resolve.
    I have resolved the issue by adjusting the PSA table for the same.
    Procedure:
    Take the psa name  --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa  --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
    Just in case anyone who come across this problem, can do the above steps.
    Regards,
    Dubbu.

  • Problem in Loading - Invalid Report File Path

    Post Author: a_Mohammad
    CA Forum: .NET
    Im using CR which came as a bundle with VS2005. I deployed my ASP.NET project on online server. Sometimes, When users try to load the reports, they got an error says "Invalid Report File Path" appears at the top of the report, and no data shown. If i reset the IIS, it return to work fine again.
    Usually i got this error when there is a lot of hits on the server and reports..
    Can you plz advice on that???

    Hello ,
    The formula must always return some value. When a conditional test produces no result and this code is responsible for the RETURN in a formula, the error occurs. Make sure that the condition returns a value in all cases (trap errors).
    Example:
    Problem code
    function CF_1Formula return Number is
    begin
    if :deptno = 10 then
    return(10);
    end if;
    end;
    If deptno is not 10 , this does not return any value .
    Correct code
    You can write the function as:
    function CF_1Formula return Number is
    begin
    if :deptno = 10 then
    return(100);
    else
    return(200);
    end if;
    end;
    Thanks
    The Oracle Reports Team

  • "Invalid Annotation Object" error

    I'm using Windows XP Pro (SP3) on a 2.66 GHz, 2 GB RAM computer, and while working in an Adobe Acrobat 9 document, I had just saved the file (CTRL+S) and the document froze and I got a Windows error box that asked if I wanted to send an error report, which I did. When I opened Adobe again, it asked if I wanted to open the last file which didn't save correctly, which I did.
    Then when I proceeded to work in the document and tried to highlight a sentence I was going to delete, I got an Adobe Acrobat popup box that said "Invalid Annotation Object. OK" but no matter how many times I clicked on "OK," the box kept popping up and wouldn't go away. I tried saving a copy of the document, but the same box was in it and wouldn't go away. I couldn't even work in the document to extract pages or anything else. Huge problem!
    Does anyone know what can I do to resolve this problem? (This happened on a Saturday when Adobe phone support is not accessible.)

    On 3/24/2015 same problems, after Adobe Acrobat 9 pro. crashed while I added text boxes.. When I opened Adobe again, Yes to open the last file which didn't save correctly, then "Invalid Annotation Object" errors on my .pdf file of 96 pages
    - first, I had to acknowledge/click the OK button until all " invalid annotation objects" error pop-up windows are gone
    (for my file with 96 pages, i had to hit the OK button more than hundreds times - need patience)
    - then found out (later) that what I did turn out to be the same steps as following post by davidsdomingo in adobe.forums
    davidsdomingo May 28, 2009 1:39 PM (in response to (Holger_Wulf))
    Here is a technique for identifying all the pages that have invalid annotation objects on them:
    1. Document > Extract Pages ...
    •Select the checkbox for "Extract Pages As Separate Files"
    •Set the destination to a 'dedicated' folder that won't contain any other files -- that way, you can simply delete the folder when this process is done.
    •Click OK.
    2. During the extraction, click OK in all the message boxes that appear.
    3. After the extraction, look in the destination folder to see which pages are missing. Those are the pages that have invalid annotation objects.
    From this point you can try to delete the objects, or simply delete and replace the pages, or implement a different solution. Hope this helps someone.
    - after extract the 96-pages file into individual files into a dedicated folder, only 95 got extracted and page 1 was not/can not be extracted.
    - I then combined the 95 good extracted pages into a new file name .pdf
    - then inserted a good page 1 without error (from the file that was saved previous day, prior to all the changes I made on the corrupted file), re work on page 1
    - delete the bad file.
    Hope this helps someone.

  • Invalid Report File Path Error

    I have included several Crystal Reports as embedded resources in a Visual Studio 2010 C# project.  When I try to run the application on a client PC I receive an invalid report file path error.  Why am I receiving this error if the rpt is embedded in the manifest?

    The following code now works on my development machine.  It obtains the server name and database name from the configuration file.  When I run on my client PC, however, it prompts me to log into the database.  It provides the correct server name but the database name is blank and integrated security is not checked.  The database name field is not enabled so I cannot provide a value.
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Windows.Forms;
    using CrystalDecisions.CrystalReports.Engine; //jp
    using CrystalDecisions.Shared; //jp
    namespace WindowsFormsApplication1
        public partial class FormRptArtist : Form
            private CrystalReport1 crReportDocument = new CrystalReport1();
            public FormRptArtist()
                InitializeComponent();
                ToolTip toolTip = new ToolTip(); toolTip.SetToolTip(btnHelp, "Flash Video Training / Help");
                helpProvider1.HelpNamespace = GlobalClass.gb_help;
            private void FormRptArtist_Load(object sender, EventArgs e)
                TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
                TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
                ConnectionInfo crConnectionInfo = new ConnectionInfo();
                Tables CrTables;
                bool repeat = true;
                while (repeat)
                    try
                        crConnectionInfo.ServerName = Properties.Settings.Default.CrystalServer;
                        crConnectionInfo.DatabaseName = Properties.Settings.Default.CrystalDatabase;
                        crConnectionInfo.IntegratedSecurity = true;
                        CrTables = crReportDocument.Database.Tables;
                        foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
                            crtableLogoninfo = CrTable.LogOnInfo;
                            crtableLogoninfo.ConnectionInfo = crConnectionInfo;
                            CrTable.ApplyLogOnInfo(crtableLogoninfo);
                        crystalReportViewer1.ReportSource = crReportDocument;
                        crystalReportViewer1.Refresh();
                        break;
                    catch (Exception exp)
                        MessageBox.Show(exp.Message);
                        DialogResult result1 = MessageBox.Show("Try Again?", "Database Connection Error",
                            MessageBoxButtons.RetryCancel);
                        if (result1 == DialogResult.Retry)
                            FormCrystalParms newWindow = new FormCrystalParms();
                            newWindow.ShowDialog();
                        else
                            repeat = false;
            private void CrystalReport11_InitReport(object sender, EventArgs e)
            private void btnHelp_Click(object sender, EventArgs e)
                GlobalClass.displayflashhelp(this, "formrptartist");     
            private void crystalReportViewer1_Load(object sender, EventArgs e)

  • Failed to commit objects to server. Error while publishing reports from BW

    Hi,
    I am getting below error while publishing reports from BW to BO.
    "0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
    Anyone having any solution for this. Thanks in advance.

    Hi Amit
    It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
    Thank you:-)

  • Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

    I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
    An error occurred while generating report:
    Object reference not set to an instance of an object.
    Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
    those circumstances.
    I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

    > Since I have to go through Edit to see the settings, and peruse the
    > entire massive folder of settings to try to identify the bad one, it has
    > been slow-going and I haven't found it yet.
    You can filter ADM templates to show configured ones only, and you can
    use the "show all settings" node. This will speed the work up - a little
    bit at least :)
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

Maybe you are looking for