Framemaker 12 - "Liste von" defekt?

Guten Tag,
wenn ich diese Funktion auswähle und bei den Einstellungen "Importierte Grafiken" oder "ungelöste Querverweise" angebe, bekomme ich keine oder eine unvollständige Liste.
Haben wir irgendwelche Einstellungen falsch?
Oder ist das ein Bug in FM12?
Wir benötigen diese Funktion dringen.
Kennt irgendjemand einen Trick, wie man sich ALLE importierten Grafiken anzeigen lassen kann?
*in der Hoffnung, dass irgendjemand helfen kann*
Schönen Tag noch...
Gruß
ilo

P.S. wie findet man das richtige Forum: von https://forums.adobe.com/welcome
oder

Similar Messages

  • RoboHelp - how to create Number1 and Number list styles?

    In RoboHelp 11, I have multi-level lists and normal lists. The multi-level list will continue numbering after a break in the list, like so:
    1. step one
    2. step two
    break
    3. step three
    If I want step three to start a new list, I go to the HTML and manually add a start="1" attribute. The normal list will start over at 1 after each break, and if I want it to continue I need to add a start attribute for wherever I left off.
    What I want is what I use in FrameMaker: a list style for Number1 that I can add when I want to restart lists, and a Number/Number_next for continuing where I left off, without having to manually alter the HTML. I feel like I'm missing something because I can't find an option to create a list like this in the CSS editor, and I can't figure out what to add manually to the CSS file in a text editor that makes RoboHelp recognize what I want it to do. But obviously the option exists because the multi-level list and the normal list exhibit both behaviors that I want.

    In RoboHelp (or HTML), there is no feature like you have in Frame. Both Multilevel list and regular HTML lists require you to set the numbering after you break.
    An alternative way of working may be to not create real paragraph but to end line feeds pressing Ctrl+ENTER. This won't break the list numbering while you can add multiple lines.
    Kind regards,
    Willam

  • Comment to new wish list

    I usually only read these forums through the Newsgroups interface, in which case you don't see any explanation of or introduction to new sub-forums. So I visited the forums' web interface and read the introduction. Here are my comments:
    > Welcome to the FrameMaker wish list area. Here, you can make your
    > suggestions for improvements and new features to be added to FrameMaker.
    >
    > Please note that this is a user forum and there is no guarantee that
    > anyone from Adobe will read this forum. To make a feature request
    > directly to Adobe, please use the company's feature request form at:
    > http://www.adobe.com/support/feature.html
    >
    > Discussions and comments are encouraged. The spirit here is to make
    > suggestions to improve the product, not for rants or vents. As such,
    > inappropriate messages will be moved or deleted.
    If the intention is to simply discuss possible improvements and their
    merits with your fellow FM users, fine. But I would guess that many
    people posting here would assume that this is a forum for getting feature
    requests sent to Adobe, directly or indirectly. Especially if you don't
    use the web interface or don't read the introduction quoted above.
    In that case, I have posted my opinion on such postings in the previous
    "wish list" thread, and I won't repeat it here again. I just encourage
    the forum hosts and other forum participants to keep an eye of the
    postings here and make clear that this is a user-to-user discussion
    forum, nothing more (if that's the intention).
    If the forum hosts intend to actually collect and summarize these
    postings to Adobe R&D or product management, please make that clear.
    I really think this affects the type of "requests" to post here, and the
    spirit of the following discussions. In my opinion, it may be hard to
    combine a true "feature request forum" and a more free "discussion of
    merit forum" into something truly useful.
    /Thomas Michanek
    FM user since 1990

    Thomas,
    >I usually only read these forums through the Newsgroups interface, in which case you don't see any explanation of or introduction to new sub-forums. So I visited the forums' web interface and read the introduction. Here are my comments:
    Unfortunately, the forum software doesn't send the forum description
    through the nntp: channel.
    I am aware of your sentiments on the "Feature request" issue, and I do
    make the marketing and product management and support folks at Adobe
    aware of these forums at every opportunity.
    Adobe already has a direct route for feature requests (as indicated in
    the forum description) for all products. Any of the Adobe product
    "Feature Request" forums are in the same spirit as this one - it's
    just that some Forums have more active participation of Adobe
    employees (on their own time), but that doesn't mean that nobody from
    the FM team will read these postings. One can hope that some ideas
    here will strike a chord and be acted upon.
    Please also don't discount the various plug-in and script developers
    that may pick up and run with any of the ideas presented here to
    provide all of us with something to enhance the product or our
    workflows.
    All I hope for is that we can make the best of the opportunities that
    are presented to us.
    Arnis Gubins
    Forum host

  • How do I find Framemaker 12 in the Download Center?

    I purchased a FrameMaker 12 Subscription, but I am unable to locate it in the download center or anywhere in the creative cloud.  I can't find instructions on where to locate this so I can use the software I've paid for.  Any ideas?

    framemaker is not part of your cc subscription.
    you can download here, http://www.adobe.com/cfusion/tdrc/index.cfm?product=framemaker
    the list of cc apps is here, http://www.adobe.com/products/creativecloud/tools-and-services.html

  • List-mapping scenarios

    This question was posted in response to the following article: http://help.adobe.com/en_US/robohelp/robohtml/WS0E9B86BF-4AAA-44ea-925E-1490091FB5A2.html

    RE: FrameMaker numbered list mapped to RoboHelp numbered list
    These instructions fail to account for pages that have more than one number list in RH projects linked to a FM file. There is no mechanism to properly restart list numbering. You end up with something like this no matter what you do:
    Heading 1
    1.
    2.
    3.
    Heading 2
    4.
    5.
    6.
    You can edit the Paragraph Style and use the Autonumber, Create/Edit Custom Sequence to start the first list item at number one if it has been done in the traditional way in FM (ex. FM paragraph style "Step1" numbering <n=1>. But you run into the same original problem when you try to achieve the same effect by similarly creating an Autonumber Sequence that starts at two. The effect is:
    Heading 1
    1.
    2.
    3.
    Heading 2
    1.
    4.
    5.
    So, the only way to get it to work when linking from FM is to choose the Convert to Text Option in the mapping, which looks terrible and offers no control.

  • Function module to list files

    Hii
    Can anyone help me in finding a function module that lists all the files form the application server directory along with the craetion date and time??
    I was using the function module SUBST_GET_FILE_NAME which lists all the files, but the date and time is not maintained here..I mean, the file creation date and time fields are available, but blank..I want the date and time as can be seen in AL11 when we browse for a file in a directory..
    Tx

    Hi,
    use this program or put the code in a function module if you want
    i have not provided any output, so put a breakpoint at the write:/ 'end'. statement and see the contents of the file_list internal table
    *& Report  ZKRIS_GET_DIRECTORY_FILES_ATTR
    REPORT  zkris_get_directory_files_attr.
    PARAMETERS: p_dir(128) DEFAULT 'write your dir name here'.
    TYPES: name_of_dir(1024)        TYPE c,
           name_of_file(260)        TYPE c,
           name_of_path(1285)       TYPE c.
    DATA: BEGIN OF file,
            dirname     TYPE name_of_dir,  " name of directory. (possibly
                                           " truncated.)
            name        TYPE name_of_file, " name of entry. (possibly
                                           " truncated.)
            type(10)    TYPE c,            " type of entry.
            len(8)      TYPE p,            " length in bytes.
            owner(8)    TYPE c,            " owner of the entry.
            mtime(6)    TYPE p, " last modification date, seconds since 1970
            mode(9)     TYPE c, " like "rwx-r-x--x": protection mode.
            useable(1)  TYPE c,
            subrc(4)    TYPE c,
            errno(3)    TYPE c,
            errmsg(40)  TYPE c,
            mod_date    TYPE d,
            mod_time(8) TYPE c,            " hh:mm:ss
            seen(1)     TYPE c,
            changed(1)  TYPE c,
          END OF file.
    DATA: sap_yes(1)  VALUE 'X'
        , sap_no(1)   VALUE ' '
        , srt(1)      VALUE 'T'
        , no_cs       VALUE ' '            " no MUST_ContainString
        , all_gen     VALUE '*'    " generic filename shall select all
        , strlen      LIKE sy-fdpos
    DATA: BEGIN OF file_list OCCURS 100,
            dirname     TYPE name_of_dir,  " name of directory. (possibly
                                           " truncated.)
            name        TYPE name_of_file, " name of entry. (possibly
                                           " truncated.)
            type(10)    TYPE c,            " type of entry.
            len(8)      TYPE p,            " length in bytes.
            owner(8)    TYPE c,            " owner of the entry.
            mtime(6)    TYPE p, " last modification date, seconds since 1970
            mode(9)     TYPE c, " like "rwx-r-x--x": protection mode.
            useable(1)  TYPE c,
            subrc(4)    TYPE c,
            errno(3)    TYPE c,
            errmsg(40)  TYPE c,
            mod_date    TYPE d,
            mod_time(8) TYPE c,            " hh:mm:ss
            seen(1)     TYPE c,
            changed(1)  TYPE c,
          END OF file_list.
    DATA: BEGIN OF searchpoints OCCURS 10,
            dirname     TYPE name_of_dir,  " name of directory.
            sp_name     TYPE name_of_file, " name of entry. (may end with *)
            sp_cs(10)   TYPE c, " ContainsString pattern for name.
          END OF searchpoints.
    searchpoints-dirname = p_dir.
    searchpoints-sp_name = '*'.
    searchpoints-sp_cs = ''.
    PERFORM fill_file_list USING searchpoints-dirname
                                 searchpoints-sp_name
                                 searchpoints-sp_cs
    WRITE:/ 'end'.
    *&      Form  fill_file_list
    *       text
    *      -->A_DIR_NAME      text
    *      -->A_GENERIC_NAME  text
    *      -->A_MUST_CS       text
    FORM fill_file_list USING a_dir_name a_generic_name a_must_cs.
      " Routine von M. Mittelstein
    ******************************************************************CAS***
    * Es wird eine Liste von Dateinamen in die Tabelle FILE_LIST gelesen.
    * A_DIR_NAME ....... directory name
    * A_GENERIC_NAME ... generic filename (may end with *)
    * A_MUST_CS ........ a contains pattern for legal filenames  OR NO_CS
      DATA: errcnt(2) TYPE p VALUE 0.
    *  call 'C_DIR_READ_FINISH'             " just to be sure
    *      id 'ERRNO'  field file_list-errno
    *      id 'ERRMSG' field file_list-errmsg.
    *  call 'C_DIR_READ_START' id 'DIR'    field a_dir_name
    *                          id 'FILE'   field a_generic_name
    *                          id 'ERRNO'  field file-errno
    *                          id 'ERRMSG' field file-errmsg.
      IF sy-subrc <> 0.
        sy-subrc = 4.
        EXIT.
      ENDIF.
      DO.
        CLEAR file.
        CALL 'C_DIR_READ_NEXT'
          ID 'TYPE'   FIELD file-type
          ID 'NAME'   FIELD file-name
          ID 'LEN'    FIELD file-len
          ID 'OWNER'  FIELD file-owner
          ID 'MTIME'  FIELD file-mtime
          ID 'MODE'   FIELD file-mode
          ID 'ERRNO'  FIELD file-errno
          ID 'ERRMSG' FIELD file-errmsg.
        file-dirname = a_dir_name.
        MOVE sy-subrc TO file-subrc.
        CASE sy-subrc.
          WHEN 0.
            CLEAR: file-errno, file-errmsg.
            CASE file-type(1).
              WHEN 'F'.                 " normal file.
                PERFORM filename_useable USING file-name file-useable.
              WHEN 'f'.                 " normal file.
                PERFORM filename_useable USING file-name file-useable.
              WHEN OTHERS.              " directory, device, fifo, socket,...
                MOVE sap_no  TO file-useable.
            ENDCASE.
            IF file-len = 0.
              MOVE sap_no TO file-useable.
            ENDIF.
          WHEN 1.                     " end of directory
            EXIT.
          WHEN 4.                     " filename too long
            MOVE sap_no TO file-useable.
          WHEN OTHERS.
            ADD 1 TO errcnt.
            IF errcnt > 90.
              EXIT.
            ENDIF.
            IF sy-subrc = 5.
              MOVE: '???' TO file-type,
                    '???' TO file-owner,
                    '???' TO file-mode.
            ELSE.
    *         ULINE.
    *         WRITE: / 'C_DIR_READ_NEXT', 'SUBRC', SY-SUBRC.
            ENDIF.
            MOVE sap_no TO file-useable.
        ENDCASE.
        PERFORM p6_to_date_time_tz(rstr0400) USING file-mtime
                                                   file-mod_time
                                                   file-mod_date.
    *   * Does the filename contains the requested pattern?
    *   * Then store it, else forget it.
        IF a_must_cs = no_cs.
          MOVE-CORRESPONDING file TO file_list.
          APPEND file_list.
        ELSE.
          IF file-name CS a_must_cs.
            MOVE-CORRESPONDING file TO file_list.
            APPEND file_list.
          ENDIF.
        ENDIF.
      ENDDO.
      CALL 'C_DIR_READ_FINISH'
          ID 'ERRNO'  FIELD file_list-errno
          ID 'ERRMSG' FIELD file_list-errmsg.
      IF sy-subrc <> 0.
        WRITE: / 'C_DIR_READ_FINISH', 'SUBRC', sy-subrc.
      ENDIF.
      IF srt = 'T'.
        SORT file_list BY mtime DESCENDING name ASCENDING.
      ELSE.
        SORT file_list BY name ASCENDING mtime DESCENDING.
      ENDIF.
      sy-subrc = 0.
    ENDFORM.                    "FILL_FILE_LIST
    *&      Form  filename_useable
    *       text
    *      -->A_NAME     text
    *      -->A_USEABLE  text
    FORM filename_useable USING a_name a_useable.
    *----================------------------------
      DATA l_name(75).
      l_name = a_name.
      IF l_name(4) = 'core'.
        a_useable = sap_no.
      ELSE.
        a_useable = sap_yes.
      ENDIF.
    ENDFORM.                    "FILENAME_USEABLE

  • Ich habe 3600 Bilder von meinem iphone in iphoto geladen hat alles geklappt jetz sind aber nur ca 400 zu sehen der rest ist verschwunden.... wenn ich das ihone wieder anschliese sag der rechner all fotos wären bereits importiert hat jemad eine Idee??

    ch habe 3600 Bilder von meinem iphone in iphoto geladen hat alles geklappt jetz sind aber nur ca 400 zu sehen der rest ist verschwunden.... wenn ich das ihone wieder anschliese sag der rechner all fotos wären bereits importiert hat jemad eine Idee??

    Rai,
    hast du nach dem Importieren die Bilder automatisch vom iPhone löschen lassen oder sind sie noch auf dem iPhone?
    Sollten die Bilder nicht mehr auf dem iPhone sein,  durchsuche alles in der iPhoto Mediathek. Eventuell sind die Photos im Papierkorb oder ausgeblendet. Aktiviere "Darstellung > Ausgeblendete Fotos".
    Ist die Mediathek groß? iPhoto zerlegt den Import automatisch in viele kleine Ereignisse. Manchmal sind diese einfach falsch einsortiert. Hast Du wirklich die Ereignisliste komplett durchsucht und nach Datum sortiert?
    Wenn sie noch auf dem iPhone sind, versuche den Download nochmals, aber diesmal mit ImageCapture.app (Digitale Bilder.app auf deutsch).  Verbinde das iPhone über USB, wie beim Import für iPhoto und starte  "Digitale Bilder". Das Iphone sollte in der Seitenleiste unter "Geräte" auftauchen.
    Wenn es ausgewählt wird, sollte eine Liste von Bildern erscheinen (dauert ein bisschen).
    Wähle die Bilder aus, die noch fehlen, wähle einen Ordner in der Fußleiste, und drücke den "Importieren" Knopf.
    Léonie

  • Erstellen von Artikeln aus vorhandenen Forumsdiskussionen und Lösungen

    Da die Wissensdatenbank Funktionen mit der Community integriert sind, gibt es zwei Möglichkeiten wie man einen Artikel erstellen kann. Sie können einen Artikel erstellen, der auf einer Lösung oder auf einem nomminierten Beitrag basiert.
    Wenn Sie auf Wissensdatenbank basieren
    Gehen Sie zur Wissensdatenbank ( klicken Sie auf das schwarze Wissensdatenbank logo), wählen Sie Wissensdatenbank-Zentrale aus  Board Optionen Pulldown menü. Sie sollten mehrere Tabs sehen ( dies ist abhängig von Ihrem Grad der Berechtigung). Es sollte gleich bzw. ähnlich aussehen:
    Der erste Tab auf der linken Seite enthält eine Liste von Beträgen die für die Wissensdatenbank von der Commmunity nominiert wurden, die aber nicht als Lösungen markiert sind.  Die Zahl neben indiziert wie viele Themen es dort gibt. Einige Boards können Hunderte von Themen beinhalten, manche können mehr als tausende Lösungen anbieten, aus denen Sie Artikel starten können. Diskussionen, die als eine Lösung markiert sind - die sind in der "akzeptierte Lösungen" Liste aufgenommen.
    Nachdem Sie entweder nominierte Beiträge oder akzeptierte Lösungen angeklickt haben, werden die Themen in der Wissensdatenbank-Zentrale aufgelistet. Wenn es mehrere Seiten von Themen gibt, wird die normale Navigation-Seite offensichtlich erscheinen. Klicken Sie auf einen Beitrag den Sie bearbeiten möchten, drücken Sie dann die "Neue Nachricht" Taste.
    Wenn Sie auf einem Forum Beitrag basieren
    Wenn Sie sich im Forum in Beträge-Ansicht befinden, können Sie auch die Themenoptionen benutzen um die Wissensdatenbank zugreifen und gleich die Arbeit mit einem Artikel beginnen, ohne vorher in die Wissensdatenbank selbst treten zu müssen. Wenn eine Diskussion noch nicht als Lösung markiert ist, können Sie den Beitrag für die Wissensdatenbank nominieren. Dies wird das Thema in eine Liste von nominierten Beiträgen stellen und ist ein guter Weg, wie das Thema in die Warteschlange zu stellen, wenn Sie nicht bereit sind es zu beenden, aber werden es später tun. Wenn das Thema gelöst ist, wird es automatisch in der Wissensdatenbank unter akzeptierten Lösungen Warteschlange auftreten und so wird es keine Möglichkeit mehr geben es zu nominieren, da es bereits nomminiert wurde.
    Sie können einen Wissensdatenbank-Artikel als Entwurf speichern und ihn noch bearbeiten und einige zusätzliche Informationen hinzufügen.
    1. Suchen Sie eine Diskussion, Thema oder eine Lösung auf, aus der ein Artikel entstehen wird.
    2. Klicken Sie auf "Themen-Optionen" oben dem Thema und suchen Sie nach "Start Artikel" aus der Dropdown-Liste.
    3. "Artikel Vorlage" Seite wird geladen. Es gibt 3 Arten von Vorlagen zur Verfügung: "Freiform", "Frage und Antwort" und "Lösungen". Wählen Sie die entsprechende Vorlage für den Artikel.
    4. Später wird ein neue Artikel Seite angezeigt - sie wird automatisch mit dem gleichen Betreff auftreten.
    5. Der Inhalt des Artikels unter "Editor" ist leer. Allerdings kann der Benutzer "Inhalte" Tab im rechten Navigationsbereich finden, gefüllt mit Diskussionen mit den akzeptierten Lösungn.
    6.Wenn ein Benutzer Inhalt aus einem Beitrag in den Artikel einbeziehen möchte, kann er oder sie das Feld des Beitags ziehen und es in "Editor" Bereich kleben. Der Inhalt des Beitrags wird im Augenblick angezeigt.
    7. Ein Benutzer kann mehrere Beiträge ziehen und diese zu dem Inhalt in Editor einfügen.
    8. Der Inhalt kann im Editor bearbeitet werden. Benutzer sollte Inhalt aus ursprünglichen Beiträgen nicht verwenden, sondern es dem entsprechenden Inhalt anpassen.
    Hast Du eine Lösung auf Deine Frage bekommen? Markiere diese bitte als gelöst!! Du kannst somit auch anderen Usern helfen
    Hat Dir jemand heute geholfen? Bitte drücke den Stern auf der linken Seite und bewerte ihn mit einem Kudo!!
    Folge uns auf dem Twitter @LenovoForumDE

    Problem in LabVIEW nich in Diadem. Fehler beim einstellen!
    Martin

  • Fonts issue while using FM 7.1

    Hi,
    I am using the XML file as a source and port the content to FM 7.1. I have to port 8 languages like Arabic, Russian, Korean, and so on. I am facing the following issues with few of the languages:
    Korean - The Korean fonts (Gulim, GulimChe, Dotum, and DotumChe(True type)) are available in the FrameMaker font list, but when I copy andpaste the content in FrameMaker and apply the fonts, the content is not thesame, there are “?” in between.
    Russian - The Russian font (Arial) is available in theFrameMaker font list, but when I copy and paste the content in FrameMaker, thecontent shows “?”
    zh-hans - The Chinese Simplified font (simsun) is available in theFrameMaker font list, but when I copy and paste the content in FrameMaker, thecontent shows “?”
    zh-hant - The Chinese Traditional font (mingliu) is available in theFrameMaker font list, but when I copy and paste the content in FrameMaker, thecontent shows “?”
    Can anyone help me to resolve this issue or if there are any websites/fonts available to download?
    Thanks,
    Keerthi

    Keerthi,
    As Michael Kazlow mentioned using FrameMaker 7.1 is one stumbling block. Using FrameMaker 8 or later will remove the problems with Russian and Eastern European languages, provided you are using fonts that support all necessary characters. Arial as FrameMaker 7 sees it does not contain Cyrillic glyphs, add Russian keyboard settings to your system and during this process a virtual font "Arial CYR" will be made available.
    With Arabic there is no real option with special tricks. FrameMaker does not and never did support right-to-left languages. All »solutions« I have heard of worked with tricks like mirrored fonts and could not take advantage of the built-in features of Windows and therefor need a proprietary editor to prepare the input.
    Regarding all non-Western languages, copy & paste requires that your system is set to the appropriate system locale.
    I am wondering why you talk about XML and also Copy & Paste. Are you going to handcraft the documents and the input is by chance in an XML document or are you planning to design a structured application? With the latter, please move the discussion to the Structured forum.
    - Michael

  • How can i pay created cards without a credit card?

    Is it possible to buy in iphoto created cards with itunes-card? what payment is possible?

    Ich habe bisher immer nur mit Kreditkarte bezahlt; aber nach den Apple-Support Artikeln sollte eine Bezahlung durch Überweisung möglich sein:  http://store.apple.com/de/help/print_products
    Wenn Du auf der obigen Seite in der linken Spalte auf "Zahlung & MwSt." gehst, koomt eine Liste von Zahlungsmethoden. Notfalls rufe mal bei der Telefonnummer oben auf der Seite an.
    http://support.apple.com/kb/HT1048?viewlocale=de_DE

  • Problem with binding of a selectManyCheckbox inside a dataTable

    Hi,
    first i want to point out that my english is not the best. :)
    A german version is followed at the end of the english text.
    I have a class "MyClass" with few attributes like:
    private long id;
    private String text;
    private Set<MyClass2> childs;
    An a second class "MyClass2" wich also have some attributes:
    private long id;
    private String text;
    Now i have a List with lots of objects from typ "MyClass":
    List myList = new ArrayList();
    // Sample Data!!
    for (int i=0; i<100; i++)
    MyClass1 m1 = new MyClass1();
    m1.setId(i);
    m1.setText("MyClass1 Line " + i);
    // Now add some "childs":
    for (int j=0; j<i*2; j++)
    MyClass2 m2 = new MyClass2();
    m2.setId( i );
    m2.setText("Sample "+ i);
    m1.getChilds().add(m2);
    myList.add ( m1 );
    So now i want to show the ID and text every Object of MyClass1 on my "test.jsp" (width JSF Tags).
    The Collections inside this class should display as checkboxes (value = id, label = text).
    Sample:
    ID: +1+ TEXT: MyClass1 Line 1
    CHECKBOXES:
    [x] Sample 0
    [x] Sample 1
    ID: +2+ TEXT: MyClass1 Line 2
    CHECKBOXES:
    [x] Sample 0
    [x] Sample 1
    [x] Sample 2
    [x] Sample 3
    Okay i think you know what i mean. ;-)
    I tryed it also with a dataTable to iterate in "myList" and use a selectOneMenu with selectItems to generate the checkboxes.
    Here is the code:
    <h:dataTable value="#{myBean.myList}" var="rowInstance" binding="#{myBean.dataTable}" id="dataTable">
    <h:column>
    <h:outputText value="ID: #{rowInstance.id}" />
    <h:outputText value="TEXT: #{rowInstance.text}" />
    </h:column>
    <h:column>
    <h:selectManyCheckbox id="cbox" styleClass="checkbox">
    <f:selectItems value="#{myBean.childs}"/>
    </h:selectManyCheckbox>
    </h:column>
    </h:dataTable>
    Maybe you see the that i've used childs in the selectItems.
    This is a methode like that:
    public SelectItem[] getChilds()
    MyClass1 mc1 = (MyClass1) dataTable.getRowData();
    // now i iterate the childs and make for each a SelectItem()
    Also you maybe see that i have no binding on selectManyCheckbox, because i have no idea how it works. :-)
    I've tried to bind it to a String[] but and the end this String[] always contain the last low.
    My Question is now:
    When the user pressed the submit Button how can i figure out which Checkboxen the user clicked ?
    Thank you a lot.
    Now the german version (surley better explained):
    Hallo nochmal,
    ich habe versucht auf englisch mein Problem zu schildern.
    Was mit sicherheit nicht zu 100% gelungen ist, deshalb hier noch mal eine deutschsprachige Version (maybe some germans out there).
    Wie oben abgeblidet habe ich im Prinzip zwei Klassen.
    Die erste Klasse "MyClass1" hat eine Collection die Objekte von der Klasse "MyClass2" enth�lt.
    Nun m�chte ich auf meiner JSP Seite die JSF Tags benutzt eine Liste von Objekten (die vom Typ "MyClass1" sind) abbilden.
    Die Collection innerhalb dieser Klasse soll als Checkboxen dargestellt werden.
    Ich habe es ohne gro�e Probleme hinbekommen, dass er das so anzeigt wie ich das m�chte.
    Nur habe ich z.Z. noch Probleme damit wie ich sp�ter herausfinde, welche der Checkboxen denn nun angew�hlt sind.
    Normalerweise w�rde man ja ein binding machen, so k�nnte man alle ausgew�hlten Checkboxen (getSelectedValues()) ja bekommen.
    Da aber die Anzahl der Objekte immer unterschiedlich ist kann ich nicht die entsprechenden Variablen anlegen.
    Deshalb die Frage: Wie bekomme ich mit welche der Checkboxen ausgew�hlt wurden? Wie muss das binding aussehen?
    Vielen Dank.
    Greetings from Germany. :)

    Just bind it to the row object.
    JSF<h:dataTable value="#{myBean.myDataList}" var="myData">
        <h:column>
            <h:selectManyCheckbox value="#{myData.selectedItems}">
                <f:selectItems value="#{myData.selectItems}" />
            </h:selectManyCheckbox>
        </h:column>
    </h:dataTable>MyDataprivate List<String> selectedItems; // + getter + setter
    private List<SelectItem> selectItems; // + getter

  • Is this safe: install fm9 and fm7.2 on one computer?

    I want to try the frame9 trial version on a computer with 7.2 installed (non-structured, XP/SP3).
    I have tons of  work to do too and can't afford any cross-pollination (software corruption,
    driver conflicts, etc.). Anyone tried this? (I know about backing up my docs, etc.).
    Also:
    - Anyone found or written any info on migrating from fm7.2 to fm9?
    - Anyone tried this an been burned?
    - Any release notes for fm9 (bug fixes, etc?).
    - Does fm9 use multi-core processors?
    Any suggestions or comments welcome.
    Thanks.
    James
    [using Frame since fm1 and still alive !!!]

    I'm sure that you searched for this in the archives, and Googled for the threads in the FrameMaker mailings lists, so I'll just summarize your bullet items.
    7 & 9 together? They co-exist on the same system just fine.
    You asked:
    Also:
    - Anyone found or written any info on migrating from  fm7.2 to fm9?
    Probably several thousand of us. 9's been out for a while.
    - Anyone tried this an been burned?
    Slightly - see below.
    - Any  release notes for fm9 (bug fixes, etc?).
    Well, obviously you need to apply the 9 patches.
    But your biggest problem may be that 7 doesn't support Unicode fonts or characters, and FM has since 8. So any "special" characters need to be remapped, and if your font files are antique formats, they may not be Unicode compliant.
    - Does fm9 use multi-core  processors?
    No
    When working with files in FM 9 that started life in earlier versions, I have gotten into the habit of "cleaning" all the component files in the book. SaveAs them to MIF, then open them and save as .FM.  This is my SOP for any files from a previous version that I open in 9. You can do this at the book level if you install the eval copy of MIF2Go from omsys.com -- it installs a WashToMif utility on the Files menu that works for all the files in the book.
    In a couple of cases, I've also built new books in the 9 format and just copied in files from the 7 book, then regenerated the TOC/Index and other generated files.
    Cheers,
    Art

  • I conditionalized my graphics in FM to not display before linking; still have space where graphic wa

    Using FM10/RH9/Windows XP
    I conditionalized all of my graphics in Framemaker to not display before I linked the book file to RH.  On the Conversion Settings dialog box in the FrameMaker Settings list box, I selected Other Settings and then selected the Apply FrameMaker Conditional Text Build Expression so that the anchored frame would not display as an empty line in RH.  But the space is there. This used to work fine.
    In FM, all images are wrapped in a fig tag. Everything looks great in FM, great in RH, not so great in FlashHelp.
    Thanks for the help.

    We are using conditional text to put a BETA watermark in the left margin of the doc. No other conditions than that.
    I actually used FrameSLT to write a script to conditionalize the graphics.  This is the expression I used:
    self::Fig[image]
    By text markers, do you mean the Show Condition Indicators on the Show/Hide Conditional Text dialog box?

  • How to get the Figure Title to appear below the graphic, not above

    I have valid XML that I am importing into FrameMaker just for printing.
    My <figure> element contains a <title> and a <graphic> element. The graphic comes in within an anchored frame, appearing after the figure title. The figure title needs to be below the graphic. How do I get this to work? I read a couple of threads that used tables to wrap the graphic & the title and to make the title appear below, but that was during an export function to XML, not an import. Short of editing the DTD, EDD & all of the XML data to have the graphic element structure come before the title within <figure>, how would this be accomplished? Thanks in advance.

    You're saying the xrefid should go in the <title> instead of in <figure>, but where in what document do I point to that ID?
    First, to cross-reference an element, the target element has to have an ID attribute. You do not have to expicitly put a value into that attribute. When you create the cross-reference in FrameMaker, you list the elements, select the title element, and select the particular instance of that element as the target. FrameMaker adds a value to the target ID attribute for you.
    Second, FrameMaker basically treats every element as a paragraph unless the EDD specifically states that it is to have character formatting. When you create a cross-reference to an element, the TEXT of the element is the text of the first paragraph IN the element. In your case, the graphic element is the first paragraph inside the figure element; it has a phantom (blank) paragraph above the graphic to hold the graphic marker. Then the title element is the second paragraph in the figure element. So, when you reference the figure element, the text of the first paragraph inside it is blank.
    Third, the same applies to autonumbering. If the cross-reference is to show the autonumber and you target the figure element, then the first paragraph in the figure is the graphic element which has that blank paragraph above it. Your EDD does not treat apply formatting, that is the autonumbering to the graphic element. Hence, the autonumbering does not display in the cross-reference. FrameMaker has no way to dig down into the figure element and extract autonumbering from its second child element. Thus, you need to target the title element itself.
    Rereading your post, I may not be actually answering your questions, but maybe this will clear up a few things.
    In the EDD, I have:
    Element (Conatiner): title
    Text format rules
    1. If context is: {notfirst} < subfig
        Use paragraph format: subfigs
        Else, if context is: {first} < subfig
        Use paragraph format: subfig
    2. If context is {only} < figure
        Use paragarph format: figuretitle
    Element (Container): figure
    Text format rules
        Element paragraph format: figure
    Element (CrossReference): xref
    Initial cross-reference format
    1. If context is: [type="figure"]
        Use cross-reference format: figure
    You do not give an example of how you are using the subfig element. But there is a problem with the title element in a figure element. The context {only} < figure means "the only child element in the figure element". This will NEVER be satisfied because title is not the only element in figure; figure also has a graphic element. NOTE {only} means only ELEMENT NOT only TITLE element. This confused me when I started creating EDDs.
    NOW, if I assume the subfig structure should be something like:
    <figure>
    <subfig><graphic/><title></subfig>
    <subfig><graphic/><title></subfig>
    <subfig><graphic/><title></subfig>
    </figure>
    Then the context {first} < subfig is NEVER satisfied because title is NEVER the first element inside subfig but {notfirst} < subfig is always true, because title is never the first element inside subfig. Hence, all title elements inside subfig elements are tagged with the subfigs tag, never subfig.
    I am thinking the contexts should be:
    subfig {first} < figure
    subfig {notfirst} < figure
    Remember these are contexts for the title element. The first is a title element in the first subfig element in a figure element; and the second is a title in a subfig that is not the first element in a figure element.
    Figure 1-1. ABCD                     <-- figuretitle
    Figure 1-2. EFGH (Sheet 1)     <-- subfig
    Figure 1-2. EFGH (Sheet 2)     <-- subfigs
    Figure 1-2. EFGH (Sheet 3)     <-- subfigs
    For instructions A - D, see Figure 1-1. For instructions E - H, see Figure 1-2.
    I am assuming you are manually entering Sheet 1, Sheet 2, etc in the title elements of each subfig element. It is not clear from your posts where the autonumber is displayed. Is it displayed in front of the title or above the graphic? If the title element carries the autonumbering, then you need to target the title element and not the figure element. If the autonumber is in that "blank" line above the graphic, then you can target the figure element because its first paragraph displays the autonumber.
    I believe I have gone on way too much, but hope something in the above is the answer to your problem. See if any of this helps and then post again. Maybe we can get this figured out...pun intended.
    Van

  • Register XSD-Files which includes Other XSD-Files

    Hallo
    i have two XML-Schemata. One is included by the other.
    Here is an example:
    This is the XSD, which is included by the other (metadata.xsd):
    <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
         <!-- Metadatenbereich für das xml-Dokument selbst-->
         <xs:element name="metadata" type="metadataType">
              <xs:annotation>
                   <xs:documentation>ROOT ELEMENT von Metadata</xs:documentation>
              </xs:annotation>
         </xs:element>
         <!-- Glossar: Metadatenbereich + Glossarinhalt als Liste von Glossareinträgen -->
         <xs:complexType name="metadataType">
              <xs:sequence>
                   <xs:element ref="identifier"/>
                   <xs:element ref="category"/>
                   <xs:element ref="creator"/>
                   <xs:element ref="creation_date"/>
                   <xs:element ref="publisher"/>
                   <xs:element ref="language"/>
                   <xs:element ref="title"/>
                   <xs:element ref="basic_year"/>
                   <xs:element ref="statistic"/>
    This is the XSD, which include the other XSD (lexikon.xsd):
    <?xml version="1.0" encoding="UTF-8"?>
    <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="unqualified" attributeFormDefault="unqualified">
         <!-- Includieren der Metadaten-->
         <xs:include schemaLocation="metadata.xsd"/>
         <!-- ROOT Element von Lexikon-->
         <xs:element name="lexikon" type="lexikonType" xdb:defaultTable="LEXIKON">
              <xs:annotation>
                   <xs:documentation>ROOT ELEMENT</xs:documentation>
              </xs:annotation>
         </xs:element>
         <xs:complexType name="lexikonType">
              <xs:sequence>
                   <xs:element ref="metadata"/>
                   <xs:element ref="lexikonEntries"/>
              </xs:sequence>
              <xs:attribute name="lexikonKat" type="xs:integer">
                   <xs:annotation>
                        <xs:documentation>für spezielle UnterkategorienTypen zu den Lexikas</xs:documentation>
                   </xs:annotation>
              </xs:attribute>
         </xs:complexType>
         <!---->
         <!-- GLOSSAR-ELEMENTE -->
         <!---->
         <!-- ExplicationTxt-->
         <xs:element name="explicationTxt" type="explicationType"/>
         <xs:complexType name="explicationType">
              <xs:choice>
                   <xs:element ref="verweis"/>
                   <xs:element ref="txt"/>
                   <xs:element ref="para"/>
    Both documents have i copied to a webdav-folder. Now i want register the documents.
    BEGIN
    DBMS_XMLSchema.registerSchema(
    schemaurl=>'http://190.1.1.148:8080/home/DEV/xsd/lexikon.xsd',
    schemadoc=>sys.UriFactory.getUri('/home/DEV/xsd/lexikon.xsd'));
    END;
    The following error-message is displayed:
    ERROR at line 1:
    ORA-31000: Resource 'metadata.xsd' is not an XDB schema document
    ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 0
    ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 166
    ORA-06512: at line 2
    I made the XSD-Files by XMLSpy. The Documents are well-formated and valid.
    When i make a new XML-File based ONLY (of course) on lexikon.xsd everything works fine with XMLSpy.
    How must i register these documents? Is it possible? Or can´t i register XSD-Files which includes others?
    Thank you very much
    cu
    Heidi

    Heidi,
    register the metadata.xsd first inthe same way and then register the lixikon.xsd.
    it should work.

Maybe you are looking for