FREE_SELECTIONS_DIALOG in a Tabstrip

Dear Experts,
I have been searching for help, but I couldn't find any helpful discussion so far.
I know we can generate full screen or popup screen using FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG.
My question:
Is it possible to generate dynamic section screen using FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG in a Selection screen tab strip.
If yes, could you please provide sample code?
Regards,
Mohan

any help..

Similar Messages

Error in creation of Tabstrip Control

Hi Guy's
Please help me i created one sample tabstrip, when executing this program i am getting error message" SQL Error in the database when accessing a table". Pasting my code here please help me where i did mistake. it is very urgent.
1) IN SE-38
tables : kna1.
data : begin of itab occurs 0,
land1 type LAND1_GP,
name1 type NAME1_GP,
end of itab.
*& Module USER_COMMAND_0100 INPUT
case sy-ucomm.
when 'DISP'.
select land1 name1 from kna1 into itab where kunnr = kna1-kunnr.
append itab.
endselect.
when 'EXIT'.
leave program.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
MOVE-CORRESPONDING ITAB TO KNA1.
ENDMODULE.
2) IN SE51-Fow Logic and layout of Screen 100
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING 'ZSHANTHU1' '110'.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
CALL SUBSCREEN SUB.
3) In the screen -110 Flow logic and Layout
PROCESS BEFORE OUTPUT.
MODULE STATUS_0110.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0110.
Edited by: sai shanhu on Apr 11, 2008 1:32 PM

Hi,
From the message it seems either you are using wrong company code in Organisation data of the PO or the company code need to be assigned to country in spro-enterprise structure-Financial accounting-edit copy check company code.
Please check this.
Dhruba

Error in tabstrip control progtram while in Background job scheduling

Hi ABAPer's,
I need some help...I developed one tabstriip control program with 3 tabs. while excute it in foregroung it is executing nice..but while i am job scheduling the same program in background it was getting error's like .........
Control Framework: Fatal error - GUI cannot be reached
SET SCREEN not allowed in subscreens (screen: <Report Name> 0100)
so..if any body know the solution ...plz help me...
Thanks & Regards
Srinivas-SAP,

Hi,
please go through the functionality of tabstrips.
basically they are placed on tabstrips.
so they dont have their own ok codes and call screen and set screen ( to best of my knowledge )
can not be used.
if you are using set screen remove them.
even without using set screen if you are gettig the error, please let us know.
regards
Ramchander rao.K

Performance Problems with UI Element Tabstrip and IE

Hi,
I use the UI Element "Tabstrip" in a Java Web Dynpro Application. The application gets slower the more I jump from one tab to the next. All the other UI Elements (e.g. ComboBox, TextField) are affected, too.
A system trace on the Web AS seems to indicate that it is a client problem.
We are using the Internet Explorer 6.0.2900.2180 XP SP2 and the J2EE Engine 6.40.
It seems to be a problem with the Tabstrip element in combination with the IE (Firefox 3 works fine). We created a test application with only the tabstrip element, three tabs, and a combo box. After several clicks on the tabs, the test application gets slower...
Does anyone has had the same problem with the tabstrips, or anyone an idea what might be the reason??
Thanks,
Sabine

Open an OSS message (BC-WD-UR).
Armin

How can i hide a tabstrip control

On my screen there are a pushbutton and a tabsrtip control which contain two tabs.
initial,the tabstrip is visible,and the button with icon_collapse icon.
then,i click the button ,and the tabstrip must be invisible,and the button's icon will change to icon_expand.
if i use screen-name conditions to set the tab invisible,but the tabstrip has a shadow on the screen.the color of the space obtained by the tabstrip is different with other space's color.
How can i set the color same with other if i want to hide the tabstrip.
ths very much.

see the example of custom tabstrip control for 0591 infotype
MODULE ztab_strip_active_tab_set OUTPUT.
   IF psyst-dsubt EQ 'BNPF'.
     g_ztab_strip-pressed_tab = c_ztab_strip-tab2.
     LOOP AT SCREEN.
       IF screen-group4 = '060'.
         screen-active = 0.
         MODIFY SCREEN.
       ENDIF.
     ENDLOOP.
   ELSEIF psyst-dsubt EQ 'BNES'.
     g_ztab_strip-pressed_tab = c_ztab_strip-tab1.
     LOOP AT SCREEN.
       IF screen-group4 = '050'.
         screen-active = 0.
         MODIFY SCREEN.
       ENDIF.
     ENDLOOP.
   ENDIF.
   IF   psyst-dsubt NE 'BNPF' AND psyst-dsubt NE 'BNES'.
      LOOP AT SCREEN.
       IF screen-group4 = '050'.
         screen-active = 0.
         MODIFY SCREEN.
       ENDIF.
     ENDLOOP.
      LOOP AT SCREEN.
       IF screen-group4 = '060'.
         screen-active = 0.
         MODIFY SCREEN.
       ENDIF.
     ENDLOOP.
     g_ztab_strip-pressed_tab = ' '.
   ENDIF.
   ztab_strip-activetab = g_ztab_strip-pressed_tab.
   CASE g_ztab_strip-pressed_tab.
     WHEN c_ztab_strip-tab1.
       g_ztab_strip-subscreen = '0201'.
     WHEN c_ztab_strip-tab2.
       g_ztab_strip-subscreen = '0203'.
     WHEN OTHERS.
       g_ztab_strip-subscreen = '0202'.
   ENDCASE.
ENDMODULE.                    "ZTAB_STRIP_ACTIVE_TAB_SET OUTPUT
check this for hiding one tabstrip in one subtype and another in next subtype

How to display multiple components in a single tabstrip with different tabs

Hi Experts,
I am working on PM UI development. We have created 5 webdynpro components and all have seperate application and link to run. Now we have requirement in which we should have a single window and all components should exist in different tabs.
Till now I have used Tabstrip in a single copmponent and have no idea how to fix this issue. Could you please help me out to get this done ASAP.
Thanks in advance.
Madhu Omer

Hi Madhu,
One option that you can try now is to create a new webdnpro component with a tabstrip.
1. To each of the tab area you attach view container.
2. In the used components of webdynpro component tab you can add each of the components that you created
3. Create inboud plugs for each of these application that you created.
4. When the tab is pressed trigger a call to the inbound plug of the applications
5. You can refer the following also https://cw.sdn.sap.com/cw/docs/DOC-24752
All the Best !

Hiding A TabStrip ViewSet in a Window

Hello everyone,
I created a TabStrip ViewSet in a Window. Depending on certain conditions, i'd like to hide or show certain tab strips.
Is this possible?
Any help will be much appreciated.
Mike

Hello Arun,
I downloaded and executed the Tutorial. Unfortunately the UI elements are within a view.
I need to be able to change the properties of a tabstrip that is a viewset that is inside a Window.
regards,
Mike

How to insert tabstrip control in module pool screen painter

Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT

How to hide tabstrip Control at runtime?

hi to all.
i used a tabstrip control in my screen.
i want to make my tabstrip visible or invisible based on t-code
for my screen.
it will be total based on t-code.
if i will enter t-code zins11 it will show me tabstrip for screen 100.
if i will enter t-code zins12 it will hide me tabstrip for screen 100.
Reply me.
thanks.

If you don't mind seeing the blank grey Tab Strip control box and simply hiding the tabs, this code will help.
LOOP AT SCREEN.
    IF screen-name CP 'TS_TEST1_TAB*'.
      screen-active = 0.
      modify screen.
    ENDIF.
ENDLOOP.
where my Tab Strip name was 'TS_TEST1

Execution of Report with Tabstrips in Background Mode

Hi everyone,
              I have used 2 tabstrips in my report. When I choose the second tabstrip, give the related I/P's and then execute in Background mode. The O/P generated is coming for the 1st tabstrip instead of what I'd selected.
How could I execute the report in Background Mode for my Second Tabstrip? Any changes to be done in my Coding?
Please throw some light into this !!!!
Regards,
Ramakrishnan.G

Hi
You may have attached user command to your tabs in definition -
<b>DATA : TAB1, TAB2.
SELECTION-SCREEN BEGIN OF TABBED BLOCK TB FOR 2 LINES.
SELECTION-SCREEN TAB (15) TABNAME1 USER-COMMAND TAB1 DEFAULT SCREEN 101.
SELECTION-SCREEN TAB (15) TABNAME2 USER-COMMAND TAB3 DEFAULT SCREEN
102.
...</b>
Now in
<b>
INITIALIZATION.
TABNAME1 = 'TAB1'.
TABNAME2 = 'TAB2'.
AT SLECTION-SCREEN.
IF TB-ACTIVETAB = 'TAB1'.
    TAB1 = 'X'.
    TAB2 = ' '.
ELSE.
    TAB1 = ' '.
    TAB2 = 'X'.
ENDIF.
START-OF-SELECTION.
IF TAB1 = 'X'.
PERFORM ROUTINE_FOR_TAB1.
ELSE.
   PERFORM ROUTINE_FOR_TAB2.
ENDIF.</b>
Cheers.
( Dont forget to reward if answers helped )

What are the uses of table control and tabstrip control

can anyone tell me the uses of table control and tabstrip control

Hi,
table control is more comfortable for customizing.scroll bars all possible in this.where as it is not possible in step loops.
check this example.
PROGRAM ZBHTCTRL.
TABLES: LFA1, EKKO.
DATA: OKCODE1 LIKE SY-UCOMM,
OKCODE2 LIKE SY-UCOMM.
CONTROLS TABC TYPE TABLEVIEW USING SCREEN 1001.
DATA: BEGIN OF ITAB OCCURS 0,
MANDT LIKE EKKO-MANDT,
EBELN LIKE EKKO-EBELN,
BSTYP LIKE EKKO-BSTYP,
BSART LIKE EKKO-BSART,
END OF ITAB.
MODULE USER_COMMAND_1000 INPUT.
CASE OKCODE1.
WHEN 'BACK'.
SET SCREEN 0.
WHEN 'NEXT'.
SET SCREEN 1001.
SELECT * FROM EKKO INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE
LIFNR = LFA1-LIFNR.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 INPUT
MODULE MOVE_DATA OUTPUT.
EKKO-MANDT = ITAB-MANDT.
EKKO-EBELN = ITAB-EBELN.
EKKO-BSTYP = ITAB-BSTYP.
EKKO-BSART = ITAB-BSART.
ENDMODULE. " MOVE_DATA OUTPUT
MODULE USER_COMMAND_1001 INPUT.
CASE OKCODE2.
WHEN 'BACK'.
SET SCREEN 1000.
ENDCASE.
ENDMODULE. " USER_COMMAND_1001 OUTPUT
MODULE STATUS_1001 OUTPUT.
SET PF-STATUS 'MENU'.
SET TITLEBAR 'TIT'.
ENDMODULE. " STATUS_1001 OUTPUT
MODULE STATUS_1000 OUTPUT.
SET PF-STATUS 'DMENU'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_1000 OUTPUT
FORM ON_CTMENU_FORM1 USING CMENU TYPE REF TO CL_CTMENU.
CALL METHOD CMENU->LOAD_GUI_STATUS
EXPORTING
PROGRAM = ' ZBHTCTRL'
STATUS = 'CMENU'
MENU = CMENU.
CALL METHOD CMENU->ADD_FUNCTION
EXPORTING
FCODE = 'RX'
TEXT = 'RECIEVE'.
ENDFORM.
FLOW LOGIC:
PROCESS BEFORE OUTPUT.
MODULE STATUS_1000.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1000.
PROCESS BEFORE OUTPUT.
MODULE STATUS_1001.
LOOP AT ITAB WITH CONTROL TABC CURSOR TABC-TOP_LINE.
MODULE MOVE_DATA.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_1001.
LOOP AT ITAB.
ENDLOOP.
for more info check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac1d35c111d1829f0000e829fbfe/content.htm
thanks
Ashu.

Dialog problem using tabstrip & cl_gui_alv_grid

Hi All,
     I have created a dialog program which has 2 tab strips. On first I am displaying data n a table control & on other tabstrip display same data using grid. Here to display data in grid I have used set_table_for_first_display of class cl_gui_alv_grid.
The data is displayed successfully. But when I select second tab and return to first tab it still shows the grid on first tab in front.
Kindly tell me what I am missing.
Regards,
Dilip
Following is my code:
REPORT ZTEMP02.
controls: tab type tabstrip,
          tab_c type tableview using screen 101 .
data :    cont1 type ref to cl_gui_custom_container,
          grid type ref to cl_gui_alv_grid.
data : imara like mara occurs 1 with header line.
data zmara type LVC_T_FCAT.
data wa_mara like line of zmara.
data flag .
       select * from mara into table imara up to 100 rows.
call screen 100.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
case sy-ucomm.
when 'T1'.
    tab-activetab = 'T1'.
      FLAG = SPACE.
when 'T2'.
    tab-activetab = 'T2'.
WHEN 'EXT'.
    LEAVE PROGRAM.
endcase.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module STATUS_0102 OUTPUT
      text
MODULE STATUS_0102 OUTPUT.
if FLAG is initial.
create object :
cont1
    exporting
       container_name = 'CONT',
grid
    exporting
       I_PARENT = cont1.
FLAG = 'X'.
endif.
call method grid->SET_TABLE_FOR_FIRST_DISPLAY
     EXPORTING
       i_structure_name = 'MARA'
     changing
       it_outtab = imara[].
ENDMODULE.                 " STATUS_0102 OUTPUT

Have you attached a subscreen to tab T1 .
You will also have to use Call subscreen .

Query about TABSTRIP Control within Sub screen

Hi Expert,
I have requirement like follows:
In IW32->Enhancement Tab screen is as subscreen and No: 0900.
Now I want to have 2 different sub screen say 0910 and 0920 each of this for different purpose according to
Order Type as per clients requirement.
Actaully I have developed screen 0900 already for some order type and now clients requirement changed i.e.
there are 2 different groups of Order types (say Grp1 and Grp2)
So, I proposed a solution for this as follows:
In Enhancement Tab of IW32 according to group of Order Type (either Grp1 or Grp2) only you will be able to
see fields for that perticular Grp either of 2.
Technical Solution is like...
1) I thought that I will create 2 subscreens say 0910 and 0920.
2) In 0910 i will insert all those fields which are designed already in 0900 which is for Grp1
3) and for Grp2 i will design 0920
4) according to Order Type only 0910 or 0920 client will be able to see.
Now I got stuck in between the screen development for 0920 because there are so many fields and i said to
client that they will be able to see those fields in different Tab strips.
I never worked on Tab Strip concept, I search so many forums and sites for Lesson on Tab Strip but not
understood how to proceed as per my specific requiment.
Please can anyone suggest me how to proceed further.
Thanks in advance.
Regards,
Jay.

There's no reason why you couldn't do it.
A tabstrip control is simply made of a subscreen area and a "tabstrip" above, where each tab corresponds to a button/function code. You have 2 ways to define/program it, "local" or "server", the difference being a better performance with the "local" (interesting in slow WAN).
In ABAPDOCU demos, you have 2 programs DEMO_DYNPRO_TABSTRIP_LOCAL and DEMO_DYNPRO_TABSTRIP_SERVER.
Sandra

Dynamic creation of TabStrip

Hi,
I want to create a tabstrip dynamically.The tabstrip should have 3 tabs, and in each of the tabs i want to put some UI elements like a label, input field, dropdown, tables.........etc.
Im able to create the tabstrip and add tabs to it dynamically.
I've even created the UI elements which i wanted to put in the tabs.............But im not able to proceed as i dont know how to add the UI elements to the tabs.......
Can anyone tell me how to add UI elements to a tab in a tabstrip?
Regards,
Padmalatha.K
Points will be rewarded.

Hi,
Following code will help you to understand the dynamic creation and adding them
//Tabstrip
       IWDTabStrip tabStrip = view.createElement(IWDTabStrip.class);
       //Tab
       IWDTab tab = view.createElement(IWDTab.class);
       //Input Field
       IWDInputField inputField = view.createElement(IWDInputField.class);
       //Adding inputfield to tab
       tab.setContent(inputField);
       //Adding tab to tabstrip
       tabStrip.addTab(tab);
//Finally add this tabstip to either your root container or some other container.
Regards
Ayyapparaj

Tabstrip does not save when clicked

After I set all the input field to be required for my 3 tabs in my tabstrip, I am only able to save the data in text field after I click the save button the second time and not the first time.
Clicking Save button first time:
http://img407.imageshack.us/img407/6461/screenjk0.png
Clicking Save button second time:
http://img407.imageshack.us/img407/3266/screen2ng4.png
Here are my codes:
REPORT ZTREE_STRUCTURE2.
DATA : IO_NAME(40) TYPE C,
      IO_AGE(40) TYPE C,
      IO_GENDER(40) TYPE C.
DATA: P_HERA TYPE DNTAB-TABNAME VALUE 'ZHERA',
       ITAB_HERA TYPE TABLE OF ZHERA,
       FIELD_COUNT TYPE I,
       WA_HERA LIKE LINE OF ITAB_HERA,
       P_HERA2 TYPE DNTAB-TABNAME VALUE 'ZHERA2',
       ITAB_HERA2 TYPE TABLE OF ZHERA2,
       WA_HERA2 LIKE LINE OF ITAB_HERA2.
SELECT * INTO TABLE ITAB_HERA FROM ZHERA.
SELECT * INTO TABLE ITAB_HERA2 FROM ZHERA2.
*&SPWIZARD: FUNCTION CODES FOR TABSTRIP 'TABNAME2'
CONSTANTS: BEGIN OF C_TABNAME2,
             TAB1 LIKE SY-UCOMM VALUE 'TABNAME2_FC1',
             TAB2 LIKE SY-UCOMM VALUE 'TABNAME2_FC2',
             TAB3 LIKE SY-UCOMM VALUE 'TABNAME2_FC3',
           END OF C_TABNAME2.
*&SPWIZARD: DATA FOR TABSTRIP 'TABNAME2'
CONTROLS: TABNAME2 TYPE TABSTRIP.
DATA:      BEGIN OF G_TABNAME2,
             SUBSCREEN   LIKE SY-DYNNR,
             PROG        LIKE SY-REPID VALUE 'ZTREE_STRUCTURE2',
             PRESSED_TAB LIKE SY-UCOMM VALUE C_TABNAME2-TAB1,
           END OF G_TABNAME2.
CONSTANTS: BEGIN OF C_TRANSFORM,
             TAB1 LIKE SY-UCOMM VALUE 'TRANSFORM_FC1',
             TAB2 LIKE SY-UCOMM VALUE 'TRANSFORM_FC2',
           END OF C_TRANSFORM.
*&SPWIZARD: DATA FOR TABSTRIP 'TRANSFORM'
CONTROLS: TRANSFORM TYPE TABSTRIP.
DATA:      BEGIN OF G_TRANSFORM,
             SUBSCREEN   LIKE SY-DYNNR,
             PROG LIKE SY-REPID VALUE 'ZSCSDM_MODIFY_TRANSFORM_HERA',
             PRESSED_TAB LIKE SY-UCOMM VALUE C_TRANSFORM-TAB1,
           END OF G_TRANSFORM.
DATA:      OK_CODE LIKE SY-UCOMM.
START-OF-SELECTION.
CALL SCREEN 9000.
MODULE STATUS_9000 OUTPUT.
   SET PF-STATUS 'SCREEN_9000'.
   SET TITLEBAR 'RWB_TRANSFORM'.
ENDMODULE.                    "STATUS_8000 OUTPUT
MODULE TABNAME2_ACTIVE_TAB_SET OUTPUT.
TABNAME2-ACTIVETAB = G_TABNAME2-PRESSED_TAB.
CASE G_TABNAME2-PRESSED_TAB.
    WHEN C_TABNAME2-TAB1.
      G_TABNAME2-SUBSCREEN = '9001'.
    WHEN C_TABNAME2-TAB2.
      G_TABNAME2-SUBSCREEN = '9002'.
    WHEN C_TABNAME2-TAB3.
      G_TABNAME2-SUBSCREEN = '9003'.
    WHEN OTHERS.
*&SPWIZARD:      DO NOTHING
ENDCASE.
ENDMODULE.                    "TABNAME2_ACTIVE_TAB_SET OUTPUT
*&SPWIZARD: INPUT MODULE FOR TS 'TABNAME2'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: GETS ACTIVE TAB
MODULE TABNAME2_ACTIVE_TAB_GET INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN C_TABNAME2-TAB1.
      G_TABNAME2-PRESSED_TAB = C_TABNAME2-TAB1.
    WHEN C_TABNAME2-TAB2.
      G_TABNAME2-PRESSED_TAB = C_TABNAME2-TAB2.
    WHEN C_TABNAME2-TAB3.
      G_TABNAME2-PRESSED_TAB = C_TABNAME2-TAB3.
    WHEN OTHERS.
*&SPWIZARD:      DO NOTHING
ENDCASE.
ENDMODULE.                    "TABNAME2_ACTIVE_TAB_GET INPUT
MODULE USER_COMMAND_9000 INPUT.
IF SY-UCOMM = 'BACK'.
LEAVE PROGRAM.
ELSEIF SY-UCOMM = 'EXIT'.
LEAVE PROGRAM.
ELSEIF SY-UCOMM = 'CANCEL'.
LEAVE PROGRAM.
ELSEIF SY-UCOMM = 'SAVE'.
ENDIF.
ENDMODULE. "USER_COMMAND_9000 INPUT
FORM INSERT_TABLE.
WA_HERA-NAME = IO_NAME.
WA_HERA-AGE = IO_AGE.
WA_HERA2-GENDER = IO_GENDER.
INSERT INTO ZHERA VALUES WA_HERA.
INSERT INTO ZHERA2 VALUES WA_HERA2.
MESSAGE S001(ZMSG02).
ENDFORM.                    "UPDATE_TABLE
Can anyone tell me what is wrong with my codes?

Screen 9000 Screen with tabstrip
PROCESS BEFORE OUTPUT.
*&SPWIZARD: PBO FLOW LOGIC FOR TABSTRIP 'TABNAME2'
MODULE TABNAME2_ACTIVE_TAB_SET.
CALL SUBSCREEN:
       9001_SCA INCLUDING G_TABNAME2-PROG '9001',
       9002_SCA INCLUDING G_TABNAME2-PROG '9002',
       9003_SCA INCLUDING G_TABNAME2-PROG '9003'.
MODULE STATUS_9000.
* MODULE SCREEN_SET.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABSTRIP 'TABNAME2'
MODULE TABNAME2_ACTIVE_TAB_GET.
MODULE USER_COMMAND_9000.
    CALL SUBSCREEN:
       9001_SCA,
       9002_SCA,
       9003_SCA.
*    module exit_prog at exit-command.
Screen 9001 Screen with first tab
PROCESS BEFORE OUTPUT.
MODULE PBO_9001.
PROCESS AFTER INPUT.
CHAIN.
FIELD:IO_NAME.
ENDCHAIN.
MODULE USER_COMMAND_9001.
Screen 9002 Screen with second tab
PROCESS BEFORE OUTPUT.
MODULE PBO_9002.
PROCESS AFTER INPUT.
CHAIN.
FIELD:IO_AGE.
ENDCHAIN.
MODULE USER_COMMAND_9002.
Screen 9003 Screen with third tab
PROCESS BEFORE OUTPUT.
MODULE PBO_9003.
PROCESS AFTER INPUT.
CHAIN.
FIELD:IO_GENDER.
ENDCHAIN.
MODULE USER_COMMAND_9003.

FREE_SELECTIONS_DIALOG in a Tabstrip

Similar Messages

Maybe you are looking for