Free text Shopping cart WF
Hi,
I have to know if a shopping cart was created from a Free text item or from catalog before the WF starts (in a check funtion module).
Is there any way to know if the shopping cart was created from free text or catalog?
Thanks
Answered in SRM Workflow forum.
Similar Messages
-
Free Text Shopping cart WorkFlow
Hi,
I have to know if a shopping cart was created from a Free text item or from catalog before the WF starts (in a check funtion module).
Is there any way to know if the shopping cart was created from free text or catalog?
ThanksHi,
As per my understanding, you want to make decision, if it is Free text you need to start one work flow, else another workflow.
This check you can do it in Starting conditions of the workflow. SWB_COND (Transaction).
Go to SWB_COND, choose business object BUS2121, it will display all work flows which are event linkage activated.
Now go to specific workflow which you need to start if it is Free text Shopping cart, if the condition is true workflow will start.
If starting conditions are complex, suggest you to create new attribute and use the same in starting conditions.
Hope this will be helpful, all the best.
Regards,
Mohan Vamsi -
Error in SOCO while trying to process a shopping cart
Hi SRM Experts,
We have SRM 7.0 with extended classic scneario. I have created free text shopping cart ordered successfully.
The status of SC is "approved". The SC is sourcing enabled. When I go to Sourcing cockpit and select the requisiton and press NEXT (for further further processing of assigning sourcing and creating draft PO), there is an error
"Requistion xxxx cannot be opened in edit mode".
I have tried with different sets of user s. Also, checked the SC in BBP_PD there are no error messages displayed.
Can you please help how to overcome this issue.
Thanks in advance,
Sundar KHi,
Is your SC open in edit mode in another window by any chance?
Regards,
Nikhil -
GL directly from shopping cart without account assignment
Hi All
Is there any prerequisite in the account assignment overview to select GL from the free text shopping cart?
(backend acct assignment category ) X= GL ( Account assignment category ).
any instances we may need to do this from SRM?
i believe BAPI BAPI_PO_CREATE1 badi always expects SOME ACCOUNT ASSIGNMENT right?
Note 1408312 - Direct material does not derive correct account assignment - Can some one expalin this sap note please?
MM06EF0P_PRUEFEN
MESSAGE e000(mepo).
ENDIF.
LOOP AT ett WHERE item_with_error NE space.
MOVE-CORRESPONDING ett TO potkey.
READ TABLE pot WITH KEY potkey BINARY SEARCH.
IF sy-subrc EQ 0 AND pot-loekz NE 'L'.
MESSAGE e001(mepo) WITH ett-ebelp.
ENDIF.
ENDLOOP.
LOOP AT knt WHERE item_with_error NE space.
MOVE-CORRESPONDING knt TO potkey.
READ TABLE pot WITH KEY potkey BINARY SEARCH.
IF sy-subrc EQ 0 AND pot-loekz NE 'L'.
MESSAGE e046(mepo) WITH knt-ebelp.
ENDIF.
ENDLOOP.
ENDIF.
MuthuThanks Summer
My context is different.
free text --cost assignment folder --. select GL account only ( slect account assignment category -AcctAssCat ) - so
now assignto G/L ACCOUNT AND G/L ACCOUNT thats all and again i am fing GL accounts and select ..order
We do have option in SRM posting to direct GL account like GL = X (BACKENED ACCOUNT ASSIGNMENET) . FOR FREE TEXT ITEM , Can we post the GL account directly without ORDER / COST CENTER /WBS eleement .
if we choose GL all will disappear like cost center , order , wbs .
cost assignment
account assignemnt over view
line ; -1
percentage ;-100
assign to ; -G/L account
description;- balank
G/l ACCOUNT ;- 2XXXXX
Description;- Testing
Business area ;- blank
hope it clears now
thats what i am asking.the note might confused .
FOR EX
BBP_PDACC TABLE ACC_CAT = GL NOT CC
Muthu -
Shopping cart source of supply
Hi experts,
We are implementing SRM 7.0 in Extended Classic Scenario (SAPKIBKV06).
I need an expert advice in shopping cart SOS assignment. We have free text Central Contract in our scenario. Our requirement is that when users create free text shopping cart in SRM, these central contracts should appear as source of supply (in shopping cart). I am able to get the source of supply in shopping cart for Classic Scenario. But this does not work in Extended Classic.
My question is that is this functionality available only in Classic?
Thanks
Regards,
SKNNote 1393854 - "Block Local Sourcing" field and lable separated in contract
Note 1403375 - Block local sourcing flag is cleared
IS IT PCTR OR CCTR contract?
I GET BACK TO YOU SHORTLY.
When you create a central contract, you can specify that it is distributed to one or more SAP ERP back-end systems. On item level, you can enter release-authorized purchasing organizations by selecting the Assign Distribution pushbutton. You then enter Release-Authorized Purchasing Organizations (back-end systems) that you require, along with other data such as Location and Target Value for each back-end system.
Assigning distribution in this way can be particularly useful if you have many items as it simplifies the process.
By default, every item in a central contract is available as source of supply locally. If you do not want the items to be available locally, set the Block Local Sourcing indicator on the General Data tab page.
Header Level
The header level of a contract provides you with an overview of distribution.
Select Calculate to display an overview of the Target Values for each release-authorized purchasing organization. You only need to do this when creating the contract.
Note
The central contract is created in each specified release-authorized purchasing organization with a different number. The contract numbers (SAP SRM contract and SAP ERP contracts) are displayed on the Tracking tab page. When you subsequently search for contracts, the system displays both the SAP SRM contract number and the number under which it is known in the respective SAP ERP systems.
End of the note.
Distribution Technology
Central contracts are distributed to SAP ERP back-ends on Enhancement Package 4 and higher using SAP's service-oriented architecture (SOA).
For all other releases, distribution is carried out using iDocs
mUTHU -
Purchase requistion number not been generated for material shopping carts
Dear Experts,
I am able to create a purchase requistion for text shopping carts once it is approved. For material if i create a shopping cart then status is showing approved(activated workflow without approval) but purchase requistion number not been generated.
It was happening suddenly...earlier i was able to generate PR for material shopping carts.
Please advise on this
Thanks
RavoHi Venkatesh,
Can you please give me the detail requirement. If you want generate a PR for catalogue items then you have to maintain the setting in SPRO_>srm->SRM SERVER->cross application basic settings-> define objects in backend systems...
Thanks
Ravi -
Shopping cart not creating follow-on documents
Hi,
We were using extened classic for some time in test system and now deactivated extended classic and want to work with classic scenario. However when i create shopping cart for the material it is not creating any follow-on documents like reservation or purchase requisition or PO.
Can anyone guide me for possible reasons.
Thanks & Regards,
GaneshHi Suresh,
I am able to create Reservation and/or Purchase Requisition for the shopping cart after maintaining the backend system for product category, but when i am creating shopping cart which should create PO, i am getiing error and status of shopping cart is "Error in Process".
After going through the transaction BBP_PD, the alert is as below-
Alerts that Could Belong to this Document:
Monitor Shopping Basket\Backend application errors
Date 20.01.2006
Time 08:49:44
Message ID BBP_ADMIN 016
Message text Shopping cart &1 (PO &2): &3
Argument 1 5000000668
Argument 2 3300000002
Argument 3 MEPO 085Check item number 0 in tabl
Argument 4 00000000000000000000000000000000
Monitor Shopping Basket\Backend application errors
Date 20.01.2006
Time 08:49:44
Message ID BBP_ADMIN 016
Message text Shopping cart &1 (PO &2): &3
Argument 1 5000000668
Argument 2 3300000002
Argument 3 06 010Document contains no items
Argument 4 00000000000000000000000000000000
Monitor Shopping Basket\Backend application errors
Date 20.01.2006
Time 08:49:44
Message ID BBP_ADMIN 016
Message text Shopping cart &1 (PO &2): &3
Argument 1 5000000668
Argument 2 3300000002
Argument 3 MEPO 071Item 00010 does not exist
Argument 4 00000000000000000000000000000000
Can you throw some light on this, to solve the problem.
Thanks & Regards,
Ganesh -
Host+Domain Name+Shopping Cart Package
Ok so I am going to create a small business website with not a lot of traffic. I am banking on iWeb 2 to release in January with HTML support so adding features like a shopping cart will be easier...but until then I have some questions.
Ok lets say my site is completed with about 10-15 pages.
I want to host other than .Mac...
-I decide to host with godaddy.com or something else
-Now I want my own domain name with total masking. I don't want to see any .Mac or iweb stuff in the site domain. So I is that easy with godaddy?
Now the BIG question...
I want to sell several products on my site...assuming I now have iWeb 2 and it has HTML support, this shouldn't be that hard.
-Do I get the cart for $27 a month with Go Daddy or another host? Will that give me a totally incorporated cart bult into my website? Will is just give me HTML code to paste into iWeb?
-I would prefer an incorporated shopping cart compared to paypals free, external shopping cart.
Also, I would need a merchant account with godaddy, and who would work as the gateway for credit card payments?
Basically, once i have my site made, assuming iWeb 2 has HTML support, I just want to have a shoppig cart package that allows me to paste their HTML into iWeb and get a shopping cart that is totally internal to my site. I also want the merchant account and the whole gateway package to accept credit cards.
Any suggestions on the steps I should take on deciding the best host, domain masking feature, and shopping cart path I want???Ok, It looks like GoDaddy and Verio both offer shopping cart features, but they are external...meaning you use their online software to create basically your own "Online Store". So I would link my iWeb site to this store...but they would look tottally different. Some thing with Verio.com
https://www.godaddy.com/gdshop/ecommerce/cart.asp?se=%2B&ci=278
What is the best solution for a shopping cart that uses HTML to paste into your existing website??? -
Free Text / Catalog Shopping Cart
Hi,
I am unable to distinguish the logic required for Free Text and shopping cart catalog.
On what basis would i distinguish the logic to the workflow.
Can anyone help me in this regards,
I am facing the same issue for
Cost centre Approval
Prduct Category approval
Spend limit Approval.
For shopping Cart, How do i create the logic where there would be a distinguishing condition for the above mentioned approval process.
kindly help me !
shanky
Edited by: shanky s on Jun 15, 2010 9:23 AMHi,
If you are using Application Controlled workflow then the starting conditions for each workflow are defined in transaction SWB_COND.
The attribute &_EVT_OBJECT.EXISTFREETEXTLINEITEM& ( &EC Requirement Coverage Request.Free entry exists& ) can be used to to distinguish between free text items and catalog items. In this transaction you can search for the other attributes you wish to use in the start conditions. You can also see the list of attributes via transaction SWO1. Enter Object/Interface Type = BUS2121. Hit display and expand the attributes menu.
Kind regards,
Siobhan -
Why can't I download Free iPod Touch Apps from Apps Store w/Shopping Cart?
I have an 8GB iPod Touch (original model) with the current 2.1 software. I also have iTunes v. 8.0. The behavior I am seeing started about 3 weeks ago and continues with these updates - it was not like this when I first downloaded the 2.0 software and began installing Apps.
I prefer to manage my iPod Touch applications in iTunes. I have my iTunes account set up for a Shopping Cart, not 1-Click Buy. This is because for Music, I prefer to add songs I will want to my shopping cart, then buy them when I want to.
When iTunes 7.7 first came out with v2.0 software, even though I have a Shopping Cart for my iTunes, I could "buy" a Free App just by clicking on it, and it would be automatically downloaded and added to my Applications folder on iTunes. Then, when I synced with my iPod Touch, it would install the app on my iPod Touch. This was true for either new Apps or upgrades to existing Apps.
For the last few weeks, every time I try to update even an existing App for my iPod Touch, if I do it through the iTunes store, I get the following message:
"Applications cannot be purchased with Shopping Cart.
Your preferences are currently set to buy using Shopping Cart. Application purchases cannot be placed in Shopping Cart: they must be purchase by 1-Click. Select Buy if you'd like to purchase [NAME OF APPLICATION} by using 1-Click and your credit card will be charged immediately."
The [NAME OF APPLICATION] is filled in with whatever application I am dealing with at that time.
Why is it that even with a Free application, and an update for it at that, it will not let me obtain it with iTunes if I have a Shopping Cart? So far, I have solved the problem by doing all of my Applications management on my iPod Touch. I use the iTunes Store on my iPod Touch to search for and download the application. Then, when I sync, it places it in my Applications folder on iTunes on my PC.
This is very strange behavior for iTunes. Why would it want to charge my credit card for a Free Application?
Many thanks.
JoeHi Steve,
Thanks for your reply. I do have a valid Credit Card on the account. In addition, I also have about a $5 credit from an iTunes gift card in my iTunes account.
In any event, I'm actually NOT purchasing anything. All I'm trying to do is download a FREE App for my iPod Touch. It simply won't let me do it.
This is extremely frustrating.
Best regards.
Joe -
Free of Charge Item in Shopping Cart/PO
Hello All -
We are in SRM 5.0 (SRM Server 5.5). We would like to be able to have free of charge items on the shopping cart/PO. Does anyone know if this is standard functionality in SRM or do I need to do additional config?
I tried testing it out on the PO by leaving the price at 0 and unchecking the invoice expected checkbox. I got an error in transfer "Indicator for invoice receipt used not allowed."
Can anyone help?
Thanks
JaneHello Jane
Zero value item from SC to PO
it is possible by BADI
br
muthu -
Copy fixed text values from shopping cart to PO in SRMSERVER 5.5
Hi,
We use SRMSERVER 5.5 and want to use text schemas with fixed values to allow the user to in the shopping cart select specific predefined texts that should be visible on the output of the PO.
When looking at the IMG documentation for standard text schemas, there is one line saying "Note: The system can only copy the long texts for text types for which no fixed values have been defined in Customizing for the source text schema or for the text type in the follow-on document."
Do you have any idea how we can copy the fixed values to the PO from the shopping cart? I have taken a look at BADI BBP_LONGTEXT_BADI but I am not sure how this badi coudl help for the transfer of fixed values.
Thanks for any help,
Christine HammerströHi
<b>Please go through this -></b>
<u>SRM - SPRO Settings -></u>
Text Types Menu Path : SPRO -> SAP Implementation Guide → Supplier Relationship Management → SRM Server → Cross- Application Basic Settings -> Text Schema -> Define Text Types
Text Schema: Menu Path : SPRO -> SAP Implementation Guide → Supplier Relationship Management → SRM Server → Cross- Application Basic Settings -> Text Schema -> Define Text Schema
Fixed Values: Menu Path : SPRO ->SAP Implementation Guide → Supplier Relationship Management → SRM Server → Cross- Application Basic Settings -> Text Schema -> Define Fixed Values for Texts
<u>Please read note 425117 and 581594.</u>
<b>Related links -></b>
Re: Reason code required for movement type 122
Re: Changing properties of long text box
Hope this will help. Do let me know.
Regards
- Atul -
Modify Text "Create Shopping Cart" in Webdynpro SRM 7.0
I work with SRM 7.0 and we want change text of IVIEW when i create a shopping cart.
The text is "Create Shopping Cart" and we must modify it.
Information about IVIEW but don´t find modify it....
General Information About the Application and Component
Application: /SAPSRM/WDA_L_FPM_OIF
Web Dynpro Component: FPM_IDR_COMPONENT
Window Information: IDR
View Information: IDR_VIEW
Configuration ID: 7D48EBFA40CEFDAE3EBEFC45D888031E
Information on Field
Field ID: PAGE_HEADER
Type of UI Element: PAGE_HEADER
UI Element Library: PATTERNHello José Luis,
The texts have been hard coded in the method "GET_IDENT_TITLE" of the class /SAPSRM/CL_CH_WD_MAP_IDENT_SC for shopping cart business object.
I hope you can create some Class Enhancements to change the title according to your requirements or there might be other approaches which i am not aware at this moment to modify these texts..
Best Regards,
Mani -
How to change Vendor text in shopping cart using BADI/Function module
Hi
If any could help me out that i want to change vendor text using BADI/FMs.
Using BADI" bbp_catalog_transfer" i dint find any parameter for vendor text. please let me know if there any idea to resolve the problemHi,
you should find the vendor text within the BAdi
BBP_DOC_CHANGE
Method for shopping carts
BBP_SC_CHANGE
Here you could use the Changing Parameter
CT_LONGTEXT
The table contains 2 important fields:
TDID, where you can identify the type of text, in your case this should be ITXT for standard shopping carts (vendor text within positions)
TDLINE: which contains the text
You are now able to change the vendor text directly within this BAdi with standard ABAP methods.
Best regards
Andreas -
Adding a new text field in Shopping Cart screen
Hi,
I am new to SRM and I am working on SRM 5.0
My requirement is to add a text field for buyer's note with unlimited length similar to Approver's note in Shopping Cart screen.
I have seen in the forum that many have done this earlier and i need step by step procedure to complete this task.
I am able to create text field in Text Schema, but this field is not reflecting in shopping cart screen. Do i need to do any thing extra apart from maintaining in Text schema?
Can you please send the detailed procedure to do this task?
Thanks in advance.
Regards,
VamseeHi Saritha,
Thank you for your help. In fact, i have gone through this link and followed the steps there. But, the Text ID is not reflecting in my shopping cart.
We are using SRM 5.0. The requirement is to add a new text field with unlimited length similar to the existing Approveru2019s note field in Shopping Cart screen at header level.
I have followed the steps mentioned below.
1.Go to SRM IMGSRM Server->Cross-Application Basic Settings->Text Schema
2.Execute Define Text Types and then select the entry BBP_PD Text Object and click on Text Type.
Here, create new entry for ID as ZHTXT and Description and save it.
3.Execute Define Text Schema and then select the existing Text Schema SC ( Shopping Cart) and click on Texts for Schema.
Here, assign the newly created Text ID with details Header/Item etc.
4.I am not executing the last step Define Fixed Values for Texts, as the Text Schema SC is already assigned Transaction Type Transaction Type SHC.
Please suggest do I need to perform any extra steps apart from Text Schema to reflect the Text ID which I created in my Shopping cart screen? Or do we need to code anything on ITS side?
Thanks in advance.
Regards,
Vamsee
Maybe you are looking for
-
Hi MM Gurus, Please tell me how to do a PO and GR for Free goods.aslo tell me any other settings needs to be done at plant level. Thanks, Ravi
-
Changing input amplifier range on DAQPad 6016 when using VI Logger
How can I set the range to +/-50mV for AI on a DAQPad 6016 when using VI Logger? I think the range defaults to +/-10V. I'm seeing a lot of noise on a 30mV input signal and I think it's because the PGIA is set at its lowest gain.
-
Recordstore- check existance of records without opening?
Hello all This might be a really daft question but: Is is possible to check a the existance of records in a RecordStore without actually opening the Store? I would have thought not, but... I have just read that opening and closing RecordStores can ta
-
what to check next?
-
Cannot view/import RW2 format (Lumix GX7) in LR 5.7.1
cannot view/handle RW2 format after upgrading to LR 5.7.1. Works in LR 5.4 on my old PC. Photos from Panasonics Lumix GX7. Running PC windows 7. Any idea what the problem is?