Freezing the List View Menu

Hi Team,
I have asked to make the SP list and Library views menu freeze.
But I did not find anything that can be done/doable moreover, I read few articles regarding "How to freeze the List or Library views menu" the answer is it was done by some java scrip/jquery.
However, many were saying it just works 1(one) time later it gets break.
Hence are there any different ways of achieving this task? Kindly advise.
Thanks in Advance,
Vinay

Hi Vinay,
According to your description, my understanding is that you want to freeze the column header of a list view.
A suggestion is that you can follow Jing’s demo in this similar thread for a try to see if this is what you really want:
https://social.technet.microsoft.com/Forums/office/en-US/bab16d46-f145-4bd3-a1da-9db461fc6a8d/freeze-header-row-and-first-columns-in-a-list?forum=sharepointcustomizationprevious
Thanks 
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • How to add custom columns to the list view in Finder

    Hi,
    I'm looking for a way to view additional file details in the list view in Finder, for example audio bit rate, so I don't have to do "Get Info" for each file separately. I couldn't find a way to add columns other than the ones listed on the view options dialog.
    Can anyone help me find a way to do it?
    Thanks,
    Tal

    Have you checked the Help menu for what you want to do? I found this in Apple support - List View Options
    Check the AppleScript Forums. There is probably a script that you can use.

  • Sharepoint 2013 Discussion Board Web Part, Subject line link on Home Page does not link to the list view

    I am by no means a SharePoint developer, but I really wanted to customize the discussion board for my site - so I found this link: http://www.codeproject.com/Articles/733164/How-to-create-HelpDesk-on-SharePoint-Online
    I added the columns, like the article said, and then completed the section "Modification of the discussion board views".  I skipped the workflow stuff because while I think it would be useful I wanted to make sure I could get
    the actual customization of the discussion board to work first. 
    My Problem (Just to preface - I followed the above instructions, including disabling the Minimal Download Strategy):
    When I clicked into my discussion board list, I was able to get it to look and function as described for both the subject and flat views. However, when I click on the Subject, from the Discussion Board Web Part on my Home Page, it does not redirect into the
    Discussion Board List Flat View.  Instead, it tries to open the root folder from the Home Page while still using the subject view.  The outcome being an empty discussion board on the Home Page.
    So I decided to create a whole new discussion board to see if that one would work, when I inserted a new Discussion Board Web Part into the Home Page, newly created from the app menu, it used the same custom JS file(plumTickets), even though I never linked
    the discussion board to the JS file. Of course when I went into the newly created Discussion Board list it opened as it does OOTB.
    I am so close it having this work like I have been envisioning.  I just need users to be able to click on a discussion subject from the Home Page and be redirected to the list view of the parent folder (I think that is the correct terminology,
    but it may not be) so they would be able to see any replies and be able to reply.  Please Help Me!!!
    I truly appreciate any help you are able to provide, thank you!

    I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
    since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
    I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine.  Sorry for the wild geese in my original question.

  • Help !  The 'list view' for the Calendar app. on my Ipod touch is haywire..

    The 'list view' seems to be all wonky in Calendar on my iPod touch.
    The dates for a given day that's displayed don't make sense:
    i.e. Sunday Oct. 27 2030 followed by Saturday July 14 2001 followed by Tuesday Jan. 16 2001 are listed in consecutive order instead of today, tomorrow and next day (with correct dates).
    Also, the 'events' given for each day listed don't make sense and are often duplicated.
    The 'day' and 'month' views however, seem to be ok and not corrupted. The 'list' field in the month view also seems fine ?
    Has anybody experienced this ? Very frustrating, since I like the list view.
    I make most of my entries/changes to iCal on our main desktop (iMac 24") then sync. to my iPod. The list view seems ok on the desktop.
    Any help greatly appreciated.
    ps. not sure if the problem corresponded with an upgrade of the Ipod software to OS 3.1 from 2.x....
    ipod touch 16 GB 2nd generation iPhone OS 3.1 iPhone OS 3.1.1 (7C145)

    Attach the iPod and launch iTunes.
    Select it and goto Info tab / Advanced.
    Try using the "replace..." option and sync to see if it places the good data on there.

  • I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

    I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

    UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
    So I am just even more confused now.

  • ICal under 10.5 doesn't print the List view with To Do's correctly.

    The problem is this: I have a bunch of To Do's in iCal. I usually print them out on paper using the LIST VIEW (print dialog) so that I can take my To Do list with me. Unfortunately, after updating to Leopard 10.5, all the URL's in my To Do's have wierd links to my email and print funny code on paper now. It's like the added feature of To Do's in mail has caused something here. Anyone else experiencing this? By this way, this only happens with old to do's (before the upgrade), not new ones.

    John,
    This has happened to me as well. Our school uses phpicalendar to publish lesson plans to our web server. I have had this happen to three other teachers as well. In order to get them back to the correct server I have to export their calendars to the desktop, create a new calendar and publish it to the correct location, then import their calendars from the desktop. I haven't been able to re-enter the correct URL in the existing calendars - get an error when publishing.

  • How to get items from a list that has more items than the List View Threshold?

    I'm using SharePoints object model and I'm trying to get all or a subset of the items from a SharePoint 2010 list which has many more items than the list view threshold (20,000+) using the SPList.GetItems() method. However no matter what I do the SPQueryThrottledException
    always seems to be thrown and I get no items back.
    I'm sorting based on the ID field, so it is indexed. I've tried setting the RowLimit property on the SPQuery object(had no effect). I tried specifying the RowLimit in the SPQuerys ViewXml property, but that still throws a throttle exception. I tried using the
    ContentIterator as defined here:http://msdn.microsoft.com/en-us/library/microsoft.office.server.utilities.contentiterator.aspx,
    but that still throws the query throttle exception. I tried specifying the RowLimit parameter in the ProcessListItems functions, as suggested by the first comment here:http://tomvangaever.be/blogv2/2011/05/contentiterator-very-large-lists/,
    but it still throws the query throttle exception. I tried using GetDataTable instead, still throws query throttle exception. I can't run this as admin, I can't raise the threshold limit, I can't raise the threshold limit temporarily, I can't override the lists
    throttling(i.e. list.EnableThrottling = false;), and I can't override the SPQuery(query.QueryThrottleMode = SPQueryThrottleOption.Override;). Does anyone know how to get items back in this situation or has anyone succesfully beaten the query throttle exception?
    Thanks.
    My Query:
    <OrderBy>
        <FieldRef Name='ID' Ascending='TRUE' />
    </OrderBy>
    <Where>
        <Geq><FieldRef Name='ID' /><Value Type='Counter'>0</Value></Geq>
    </Where>
    My ViewXml:
    <View>
        <Query>
            <OrderBy><FieldRef Name='ID' Ascending='TRUE' /></OrderBy>
            <Where>
                <Geq><FieldRef Name='ID' /><Value Type='Counter'>0</Value></Geq>
            </Where>
        </Query>
        <RowLimit>2000</RowLimit>
    </View>
    Thanks again.

    I was using code below to work with 700000+ items in the list.
    SPWeb oWebsite = SPContext.Current.Web;
    SPList oList = oWebsite.Lists["MyList"];
    SPQuery oQuery = new SPQuery();
    oQuery.RowLimit = 2000;
    int intIndex = 1;
    do
    SPListItemCollection collListItems = oList.GetItems(oQuery);
    foreach (SPListItem oListItem in collListItems)
    //do something oListItem["Title"].ToString()
    oQuery.ListItemCollectionPosition = collListItems.ListItemCollectionPosition;
    intIndex++;
    } while (oQuery.ListItemCollectionPosition != null);
    Oleg
    Hi Oleg, thanks for replying.
    The problem with the code you have is that your SPQuery object's QueryThrottleMode is set to default. If you run that code as a local admin no throttle limits will be applied, but if you're not admin you will still have the normal throttle limits. In my
    situation it won't be run as a local admin so the code you provided won't work. You can simulate my dilemma by setting the QuerryThrottleMode  property to SPQueryThrottleOption.Strict, and I'm sure you'll start to get SPQueryThrottledException's
    as well on that list of 700000+ items.
    Thanks anyway though

  • Workflow not working if the trigger field isn't in the list view!

    I have a list that displays important dates, and I have set up a reminder date column which calculated the reminder date by adding 7 days on to the set date. I then have a workflow that emails out reminder of this task if the reminder date matches today.
    I have noticed that if I include the reminder date column in my list view, the workflow works fine. But as soon as I remove the reminder date field from the list view my workflow no longer works. It's obviously quite confusing to other having this reminder
    date column there when it is only needed to trigger a workflow, so how do I trigger the workflow without having it on view?
    Thanks!

    Hi Sarah,
    As I understand, you have a Date column for user to set date, then you want a reminder date to add 7days to Date column. Then you would like to trigger a workflow if reminder date matches today.
    If you do not want reminder date in the list, you could use the workflow 2013 action Core Actions > Add time to Date, to set a workflow variable to replace reminder date, and compare with today. Then you could omit reminder date column.
    If you do want reminder date in the list, please try hide reminder date column in the list and test the issue again.
    http://community.bamboosolutions.com/blogs/bambooteamblog/archive/2013/06/03/how-to-hide-a-sharepoint-list-column-from-a-list-form.aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • GUI Bug Outlook 2013 while sorting E-Mail in the list view in the main window

    Hello,
    I found a bug in Outlook 2013 - following occures: in main window, when I sort the list view with e-mails by "sent to" or by "received from" and when I delete one mail from this list, the view is not correct, because after the deleted
    E-Mail disapears when I go with my mouse Cursor over other e-mails in the list Outlook 2013 shows all mails from the top of the list (beginning in alphabetical or reverse alphabetical order) as I move with mouse over neighbour mails from the corrected view
    instead of the same view with only that one item deleted. The scroll element right has the right Position, but after clicking on the arrow up or arrow down within this element it jumps to the start. This has worked in my Outlook 2010 well, and this is very
    unpleasant because I can not work well everytime sorting my mails right again after I deleted one. This seems to be only the case if I sort my mails by Name, not if sorted by size or received/sent date, then list view works well. I use Windows 7 Ultimate x64
    and Office 2013 x32, on HP6910 with ATI graphics Card. Whole System works fine since years. Is there any log file I can submit? Is my description clear? Please help , thanks.
    regards
    Bogusz Schubert
    PIMPEX Bogusz Schubert
    Vohwinkeler Str. 58
    42329 Wuppertal
    Tel +49 202 4299 2270
    Fax +49 202 4299 2271

    I made a screenshot of this: after deleting email from a Partner starting with letter "D" Outlook jumped back to the top of the list starting with "1" - you clearly see the wrong Position of the scroll element right and false broken view of the mails
    at my mouse Cursor
    Picture is under the Domain mt.i24.cc slash outlook2013guibug1.jpg
    any help will be much appreciated

  • Using "View Selector" in the List View Web Part, changes the web part page to the view selected's page.

    Hi,
    I am relatively new to Web Parts pages.  I created a page with list view web part and a Infopath Form Web Part, which are connect via the "Get Form From" option.  My users would like to be able to use views dependent on what
    they are looking for.  So I created different views.  However, when I select the view from within the Web Part, it changes the web part page to the list view page.  I must be doing something wrong.  How do I configure the list view to show
    the selected view and results within the existing "list view web part"?
    Thanks,
    Dwayne

    Hi
    Lindali,
    Sorry, but this has not been answered to my liking.  The "List View Web Part" has the ability for the user to select the view from within the web part, so there you should be able to select a different view and have it appear within the same web part. 
    Does anyone know how to complete this task?
    Thanks,
    Dwayen

  • Is there a way to sort by description in the list view of bridge?

    I am trying to sort a mass amount of PDF files using the description meta tag. Is there away to add that tab in the list view under the content panel, or a way to use another panel to view the details of multiple files at once with description included and be able to sort them that way?

    These are the tabs that are displayed and the ones it gives me options for.
    There are many improvements needed for Bridge and the default metadata workspace is certainly one of them. In fact, in its current state it is next to useless and no help at all. But you are right, it should provide you with at least the description field but it does not. Oddly enough, the only way to achieve this is using the bottom right icons in the Bridge window. You see three of them, thumbs, large thumb with list and small thumbs with list. Currently you have selected the default small thumbs with list, if you use the middle one (large thumbs with list) and fiddle around with the slider for the size of the thumbs the description field magically appears in view but you are not able to put it in a separate column.
    So the find option is still your best option I'm afraid...
    You can also try to create your own workspace. Start dragging the borders to change the size of the panels to your comfort so you have a good overview of the panels you want to have in view.
    You can also change the order and place of panels in multiple rows but you are limited to max three columns. Place the cursor on a panel tab and start dragging it to a new location. A single blue line means either between a row or a column, a surrounded blue line means add as a tab in same location. You also can drag the tabs for your custom order.
    Now with the content panel in reasonable size use the icon bottom right for large thumbs and list view and use the slider for correct position of the description field. Save it as a new workspace (important to retrieve it when messed up). You can also have multiple windows in Bridge (at least on a Mac, you seem to be on Windows) and use one for list view and another for find results. etc. etc.

  • SharePoint Online list view threshold issues: "because it exceeds the list view threshold enforced by the administrator"

    SharePoint Online list view threshold issues: "because it exceeds the list view threshold enforced by the administrator"
    Office 365 SharePoint Online can be problematic when it comes to exceeding the list item threshold (e.g. 5,000).
    Examples of what happens after exceeding the threshold (e.g. 5,000 items):
    You can’t create new forms for the list in SharePoint Designer.
    You may have challenges with metadata fields in the forms (e.g. adding metadata values, editing metadata values, deleting the metadata column from the list).
    Cannot save the list as a template (i.e. you get the threshold error).
    Issue I'd like assistance with: how can I create a custom NewForm in SharePoint Designer
    when the list exceeds the threshold limit, given this is Office 365 SharePoint Online and I don't have access to increase that limit?
    As a control for my testing, I created another list with just a few custom columns with no list items --it worked fine for that list.
    I also tried clearing local AppData cache which didn't solve it. I'd need Central Admin on O365 SharePoint Online to increase the threshold which I don't have access
    to do. Errors received in SharePoint Designer:
    "Could not save the list changes to the server." After getting this, I tried to work around
    the create new forms issue by saving a copy of the original NewForm as NewForm2 and got the root error that I suspected was underlying it all:
    “Server error: the attempted operation is prohibited because it exceeds the list view threshold enforced by the administrator”.
    Any ideas for how to create a new list form in SD?

    Thanks Alex.
    I just found a couple new workarounds instead of using SharePoint Designer:
    Method 1: Add web parts to the form pages on the client side:
    Go to the list and execute one of these actions depending what form you want to edit: create a new item (NewForm), edit an item (EditForm), or display an item (DispForm).
    With the form you want to edit displayed, go to the gear icon and click "Edit Page".
    You should now see the web part page show up with "Add a Web Part" as an option.
    Add a Content Editor or Script Editor web part.
    Add your custom code to either one to manipulate the HTML objects using your favorite web languages.
    Method 2: Use InfoPath 2013.
       The InfoPath 2013 route appears to work.

  • How do I get the ratingrank to show up in the list view of a web app?

    I'm trying to add a review section to my site and can get the form to work correctly on my web app detail view. However I also need the list view to show the rating count. Does anyone know how I can accomplish that?
    Many thanks in advance!
    Jake

    Hi SalynotSally,
    I use the Weather Channel app, but shortly after I posted this problem, the weather did start showing up.  The notification center says at the bottom that the weather is provided by yahoo.  I did make sure the location services and such were on though as Diavonex recommended above.
    Good luck and hope it works for you!

  • Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator

    Issue : In sharepoint 2013, I am experiening below error while using filter in the list view due to the number of items in this list exceeds the list view threshold, which is 10000 items. Tasks that cause excessive server load (such as those
    involving all list items) are currently prohibited.
    Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator
    Could you please suggest a way to avoid this issue apart from incrementing the list view threshold limit .
    Prashanth

    Reorganizing content, or creating more specific views. sharepoint is warning you that the content is structured in such a way that it can cause performance issues, which should be addressed in some way.
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • Todo tab: Routes displayed when selecting the List View

    Hi,
    I have a question about the routes that appear on the workspace's  "To do" list view, and how to perform validations when they are  clicked.
    I've created a process that starts with a form being created by a  user. Then, it's validated by a sequence of other users. Each one sees a  different set of routes. On one of the steps of the process, one of the  routes requires the user to input a text.
    The condition is checked on the click  event of the AWS_SUBMIT button, where I've also put the text request. If the user is using the  card view on the "To do" tab and clicks on the item, the form opens and,  when the user submits it, all works as expected. However, if he has the  list view and clicks once on the item, the route names appear on the  bottom right of the workspace, and he's able to select them. As the form  hasn't been opened, there's no control on the selected route, and the  user is never asked to input the text. On the next step of the process,  which depends on this text, the process gets stalled.
    Is it possible to hide these routes on the workspace, disable the  list view, or stop the submit if it hasn't been started without opening  the form? I know you can customize the workspace, would this allow me  to remove the route buttons?
    The version we are using is LiveCycle ES 8.2.1.3.
    Thank you

    Is there any way to hide the submit button(green check mark) that appears on the task card when a user saves a form in their draft folder.
    Users are bypassing the form validation by submitting a form this way.  For instance, a user will fill out the form with values that do not pass validation.  They will save the form in their drafts folder.  The user will then close the form and navigate to their draft folder.  Without opening the form again, they will click the green check box submit button and a form with invalid data will be submitted to the process.
    This is LC 8.2.1.3.

Maybe you are looking for