Freight in Inbound delivery

I want to fetch freight from a condition record in inbound delivery.
Is it possible to maintain freight in inbound delivery.
Also, can I take THIS freight to shipping document (VI01).
regards
VS

Absolutely possible.
Go through G82 document in SAP building block library

Similar Messages

Intercompany STO with inbound delivery with freight....Urgent

Hi,
I have following scenario to map.
There are 2 company codes A & B and a shipment of goods is to be transferred from A to B.
I wish to use Intercompany STO process with UB.
However, A & B are geographycally separated so there involves transportation costs which will be beared by B.
How can I have the pricing procedure if I wish to have one in STO ?
If I create some freight conditions then I can add the values but I will not able to know the exact freight charges till B receives the shipment and the invoice for the same.
In this case how can I use pricing procedure ?
If I do not enter any freight charges in PO then how can I add them before I do the GR in B as this is requirement to add freight costs on material at the time of goods receipt so to arrive at exact landed cost for that material in B.
Once I wish to transfer the goods from A to B, I will do delivery so that stock gets reduced from A otherwise if I wait till the stock is physically transferred to B and then B changing the PO and add freight and subsequently doing picking, PGI and GR ,it will not correctly reflect stock positions in A.
What is the better way I can map this process.
If I wish to use inbound delivery before receiving the goods in B can I add conditions in Inbound delivery ? If so how it can be done ?
So my intended procedure will look as
Intercompany STO-UB
Outbound Delivery
Picking/PGI
Inbound Delivery with freight
GR
Please suggest as this is very critical and important requirement
Thanks in advance
regards,
manOO

Hi,
Thanks for the feedback.I wished to use NB but I don't want to go with the regular NB and subsequent billing cycle.
I want to use UB.
Anyways, is there any way by which I can have freight cnditions added at the time of Delivery.Be it Outbound or Inbound.
Please suggest.
Thanks in advance
Regards,
manOO

Goods receipt against inbound delivery

After an import po has been created then an inbound delivery is created also.So after the inbound delivery we do goods receipt and our goods receipt is done against po even when their is inbound delivery.The reason why the goods receipt is done with reference to the po is that we have different vendors for all the delivery costs for example we have a vendor for custom charges, a vendor for freight charges, a vendor for terminal charges.so the goods receipt is done against the po so that when doing the miro they can select the different vendors.But inbound delivery is done with a single vendor and if the goods receipt is done against the inbound delivery it might acquire all the costs to that vendor.Is there any method whereby we can be able to do our goods receiot with reference to inbound delivery that will also capture all the delivery costs

The process you should follows is this:
1) PO - define all the custom and freight condition types and enter the corresponding vendor in the condition types. Also, in the confirmations tab, choose Inbound delivery
2) When the vendor ships the material, create an inbound delivery from VL31N to track it (against the actual import vendor)
3) When the goods reaches customs, do a MIRO against the PO choosing 2-Planned delivery costs. This will credit the Customs vendor.
4) When the goods arrive at your plant, do a MIGO against the Inbound delivery from step 2. Enter the MIRO number of step 2 in the popup that appears.
5) Now do the MIRO for the actual import vendor and the freight vendors if applicable.
Try this in your sandbox system. Doing a GR against IBD will not cause any difference in the accounting entries.

Problem in MIRO agains BILL OF LADING & INBOUND DELIVERY

Hi GURUS / EXPERTS,
I am using INBOUND DELIVERY AGAINST PO (VL31N) & POST GOODS RECEIPT,where I mention the BILL OF LADING in SHIPMENT at Header data. After that I use MIRO, during MIRO, i reference the bill of lading number Which is mentioned in the inbound delivery. But, only the freight and other charges vendors are pulled onto MIRO. Main Vendor (i.e. Material Supplier) is not appearing here.
Please suggest.
Thanks in advance.
DSC

>
Devendra Singh Chauhan wrote:
> Hi GURUS / EXPERTS,
>
> I am using INBOUND DELIVERY AGAINST PO (VL31N) & POST GOODS RECEIPT,where I mention the BILL OF LADING in SHIPMENT at Header data. After that I use MIRO, during MIRO, i reference the bill of lading number Which is mentioned in the inbound delivery. But, only the freight and other charges vendors are pulled onto MIRO. Main Vendor (i.e. Material Supplier) is not appearing here.
>
> Please suggest.
>
> Thanks in advance.
>
> DSC
Hi Devendra,
I want to know what are the steps to do the above mention proces. Can you please explain in details.
Thanks & Regards,
Mohar

Storage location change in Inbound delivery

Hello Friends,
Inbound delivery created through confirmation control EDI process from our customer and it has a incorrect storage location. We cannot change the storage location though it is editable. (After changing it is going back to incorrect storage location which is not existing in that plant).
the storage location in the purchase order is correct. could not able to understand how the inbound delivery is updated with incorrect SLOC and it is not allowing us to change.
Appreciate any pointers to resolve this issue.
Thanks and Regards,
Gopi

As Joao said it is a custom code but now I ended up in another problem. the entire delivery is not changeable as deleted the delivery quantity while trying out to change the SLOC.
is there any way to update the delivery quantity back,
material freight group is only editable in the delivery item. pls advise

BAPI for GR ( Inbound Delivery )

Hi,
My requirement is that I need a BAPI or FM to create a Goods Receipt (MIGO document) for Inbound delivery. I need to even pass the FREIGHT Details in it. I had checked BAPI_GOODSMVT_CREATE, but i dont have the Parameter where i can pass the Freight details.
Please provide me the correct way to create GR with FREIGHT Details.
Thanks,
Ravi

Hi David,
Actually there are 2 condition types in Purchase Order (ZHC3 & ZTC3) which are related Freight details. Now when I create a GR with refrence to Inbound delivery(which is related to PO), we will be getting a FREIGHT Tab in MIGO screen, so automatically 2 line items in FREIGHT tab will be appended with the PO Vendor number. I need to change the Vendor's for both the line items in FREIGHT Tab.
Please let me know how to change the vendor details.
Thanks,
Ravi

Creation of inbound delivery without reference to a PO

Dear gurus,
Let's say that a normal inbound flow is something like this:
PO > Create inbound delivery with reference to PO > inbound shipment > Transfer Order > Confirm Transfer Order > Post Goods Receipt > Putaway
Issue:
My client does not want to create the PO because the PO serves no purpose to them. They want the process to start from inbound delivery.
Question:
1. Can a standalone inbound delivery be created WITHOUT reference to a PO ? If yes, please tell me the configuration and transaction code involved in order to create this standalone inbound delivery.
2. Based on standard configuration, can an inbound delivery be created automatically with reference to a material document (for eg MIGO Mvt Type 501). Once again, for this scenario, no PO should be involved. If yes, please tell me the configuration and transaction code involved in order to trigger the creation of this inbound delivery (I'm not looking for the answer of an inbound delivery creation BAPI to being triggered directly after the creation of the Material Document).
3. Based on standard configuration, can an inbound delivery be created manually with reference to a material document (for eg MIGO Mvt Type 501). Once again, for this scenario, no PO should be involved. If yes, please tell me the configuration and transaction code involved in order to create this inbound delivery.
Thanks.

Hi Peter,
Actually, my intention is not really to create an inbound delivery based on a goods receipt. Since my client is not keen on the idea of creating a PO, I'm actually trying to provide alternatives and workarounds. From what I have gathered, I already know this much
-> An inbound delivery must be created with reference to PO unless Handling Unit Management is activated. If Handling Unit Management is activated, the creation of a Material Document will trigger the creation of an inbound delivery (I havent tested this out yet). Therefore, a PO will not be necessary in this case.
I was kind of expecting answers along this line, unless of course, something better pops up. Maybe someone out there may know something more.
As for Handling Units, I'm not familiar with it. Hopefully somebody can give me a good configuration guideline on what to do in order to activate it so that I can simulate the scenario of a Material Document triggering the creation of an inbound delivery (I'm not looking for the kind of answers which simply cuts and pastes the SAP HELP URL, 4.6C Handling Unit PDF, Best Practice Document and etc). Hopefully somebody out there can really give me a good guideline on how to do this.
Thanks..

Creation of Inbound delivery mandatory for ASN process in classic scenario?

Dear Experts,
We are going for classic scenario for our green field SRM implementation process. Our client is not using ASN process in their existing MM process. However, they are now looking for an oppurtunity to enable Suppliers to trigger ASN using SUS. In such case, is creation of inbound delivery from Buyer side a mandatory process?
Is the below the process correct?
PO -> ASN (Supplier using SUS) -> Inbound delivery (Optional) -> Goods Receipt (Mandatory) -> Invoicing.
Here, I understand that Goods receipt can be verified against the PO or via Inbound delivery to PO. ASN will inform the store keeper in advance about impending goods receipt and smoothen the confirmation process.
Could you please comment on the above process? Could you please suggest the best practices followed here?
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hey Ranjan!,
You are on track.
The process flow you have shown is true. ASN is available as a standard as part of the MM-SUS process. It makes the buyer aware of any delays in delivery or to make arrangements on shipping docks to receive goods on a said date etc.
Regards,
Nikhil

ASN creation based on ECC inbound delivery

Hi All,
I have a scenario in which we are creating an inbound delivery in ECC and corresponding ASN should be created in supplier system.
In order to achieve this functionality of ECC to supplier system is there any way to map this functionality through any custom development ?
Kindly suggest
Thanks
Gaurav Gupta

Hi,
What I understand from the requirement is - The Supplier dispatches the material to Purchasing company & informs about the same via ASN. This ASN triggers inbound delivery in ECC. When the material reaches the Purchasing Company, GRN is posted with reference to the Inbound Delivery.
Is this correct?
If so, you can achieve this through RFC function, which can be called from vendor ERP system or through Vendor Portal by directly calling the RFC or by using Web Service.
Regards,
Prashant

Error in creation of inbound delivery

hi
When I tried to create inbound delivery against schedule agreement
1) Following warning message is coming when I enter the quantity for each and every line item
u201CAcknowledgment for PO item contains data varianceu201D
2)Following error message is coming when I saved the delivery
u201CTermination during purchase order updateu201D
So I am unable to create the inbound delivery
Note: this error is coming for a particular vendor only

Hi ,
Goto SM13 .
Find the terminations based on user and creation date.
Get the same analysed by ur ABAP team.
Also check the confirmations in PO at Item level.
Regards
Ramesh Ch

Inbound Delivery: Inbound WHSCON IDoc with Batch Split - HowTo...?

Hello
We have another tricky problem to solve on our ERP 6.0 system.
My colleagues of Lindt UK create manually inbound deliveries (VL33N) which are replicated to the warehouse (DESADV IDoc -> TRADACOMS.ORDHDR).
When the goods arrive at the warehouse they send back a good receipts message (TRADACOMS.DLCHDR -> WHSCON IDoc).
In some cases we have a batch split because the goods have been put into different storage locations. Example:
- item 10: 200 Cases of product 4711, batch 10-2011, in storage location '0001' (free available for Sale)
- item 10:     5 Cases of product 4711, batch 10-2011, in storage location '0004' (damaged)
I am aware that in the inbound WHSCON item 10 is a main position and the two actual batch split positions are sub-items (900001 & 900002 with HIPOS = '10'). I tried to used E1EDL19-QUALF = 'BAS' (= batch split) with the sub-items but failed so far to update the inbound delivery that I can see the batch split.
I have managed to get one sub-item but not 2 of them. Somehow the system aggregates the quantities for both sub-items into the single item that shows up in the inbound delivery.
When we send the inbound delivery to the warehouse the item looks like this:
- item 10: 200 Cases (no batch yet, Putaway quantity = 0, because these data are coming from the warehouse).
QUESTION: Has anybody else been faced with a similar (if not identical) problem and how did you solve it?
Thanks a lot in advance for your valuable input.
Regards
Uwe

Hello Finbarr
I assume that you do NOT send any (suggested) batches to your warehouse. Otherwise you would have the same problem like we have that the WHSCON cannot overwrite a (suggested) batch.
However, if you just send the quantity per item then the batch split is much simpler than you suggested:
"First E1EDL24 segment:
POSNR     50
MATNR     000000000000602006
MATWA     000000000000602006
CHARG     L1519   " <<< first batch
LFIMG     37.000
VRKME     CT
"Second E1EDL24 segment:
POSNR     50
MATNR     000000000000602006
MATWA     000000000000602006
CHARG     L1880   " <<< second batch
LFIMG     37.000
VRKME     CT
Well, and as qualifier we use: E1EDL19-QUALF = 'XYZ' " a dummy
The SAP system is smart enough the realize that these two E1EDL24 segment belong to the same item yet have different batches and, therefore, yield a batch split in the delivery. The system generated the 9xxxxx numbers for this sub-item lines automatically.
Although I believe that it is not possible to change a batch in the delivery using an inbound WHSCON I would appreciate to have a final proof of this assumption. I could imagine that if you first delete the item containing the suggested batch and then add a new item with the actual batch from the warehouse it might works. However, this would require to implement a user-exit which I do not prefer.
Regards
Uwe
PS: It seems I gave an answer to the wrong question (should be EDI (DESADV): Can batches be overwritten by an inbound WHSCON (pick conf)? )

Reg: How to capture the Excise Invoice with respect to Inbound delivery

Hi All,
Please give the process follow for capturing the excise invoice with respect to inbound delivery.
Thanks & Regards
Siva

Hi Siva,
Please check this link
CIN with Example..?
Regards,
Bijoy Kumar

SAP System inconsistency for Inbound delivery / MIGO and a "sap note"

Hello Friends ,
After following SAP instruction on how to remove the inconsistency between posting GR through MIGO (Inv. mang.) and the reflection of the goods movement status in the inbound delivery document - done that using sap note 570991
the problem is that the system start behaving in a weird way throwing unjustified Error messages for any suggested goods receipt using MIGO with reference to inbound
for example after creating an inbound delivery document and trying to post it via migo , an error will pop up
- Inbound delivery storage location cannot be changed to here Message no. VLA316
the thing is i didn't even maintain any storage location entry up to that point and yet i cannot post any stock !!
also another error like
- Inbound delivery batch cannot be changed to *** here
which doesn't make any sense because there is not batches in the inbound document !!
i think this behavior is coming from the "Document Flow Update for Stock Postings" inbound indicator at the shipping parameter at client level customization
i need help on how to overcome this annoying SAP Bug/Problem specially i am in a post go live critical situation

Hi,
The messages you mentioned were introduced to avoid inconsistency between inbound delivery and IM, through the note: 1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
If the messages are issued incorrectly, then you may check for SAP notes (I couldnt find anything relevant) or raise an OSS ticket to SAP.
Regards,
AKPT

Problem with HU during creation of Inbound Delivery using IDoc

Hi,
When I am creating Delivery manually and perform Packing, Handling Unit information is stored in VEKP and VEPO tables.
But when I am processing through IDoc, after passing data to Handling Unit Segments E1EDL37 (Handling unit header), E1EDL39 (Control Segment for Handling Units), E1EDL44 (IDoc: Handling Unit Item - Delivery), It is creating delivery successfully but Handling Unit information is not getting stored in VEKP, VEPO tables.
Tried most of the notes 912470, 678464, 682506 and all of them say "<i>You use the Idoc DESADV to create inbound delivery with packing data. The delivery is created, Idoc gets status 52 but the Handling Units (HUs) are missing. This is due to a program error. In case the IDoc contains segments to create HUs (E1EDL37), the IDoc processing should end in error status (51) as long as no packing data could be created</i>.".
Need your advice whether we have to maintain any customizing for this or how to proceed with it.
Thanks in advance,
Murali.

IDocs and BAPIs sometimes behave differently than transactions. You might need to add a user exit specifically for IDoc processing. Otherwise send a message to SAP and have them look at it.

Purchase order and Inbound delivery

Hi gurus,
Im trying to create an inbound delivery with reference to purchase order. In the configuration i've created a new delivery type similar to EL and said Yes to all the copy controls that system asks. When im creating the inbound delivery with reference to the PO it is picking up the standard EL delivery type instead of the one that i created. What did i miss here? I want the inbound delivery type that i created be the default inbound delivery type for that particular order type.. pls suggest
cheers
Joseph

Hi Joseph,
Just check whether the newly created delivery type is assigned to the Confirmation Category LA under the below path:
SproMaterials ManagementPurchasingConfirmationsDefine Internal Confirmation Categories
Regards
Ramesh Ch

Freight in Inbound delivery

Similar Messages

Maybe you are looking for