Frequent Hardware failure in HP-G Series Notebook

Hi All
Facing Frequent Hardware failure in HP-G Series Notebook.
I took help from HP tech support as well but they could not solve the problem & I need to send the Notebook to the repair center.
I just want to know is there a problem in whole G Series PC model or something else.

I am also having hardware problems with my HP-G series notebook. I have two of them and they both have the same problem. Longing sound on startup and some of the keys on the keyboard stopped working. Any suggestions?

Similar Messages

Internal hardware drivers needed for HP 2000 Notebook.

Perhaps someone can help me pull a pawn shop "bargain" back from a life of exclusive Linux service. The previous owner had appearantly attempted to retrograde the notebook from Windows 8 to Windows 7 using a Win7 recovery disc and an image of another computer. So of course the entire system, recovery partition and all, were formatted away and replaced with an unauthorized and broken install of Windows. I'm OK running Ubuntu on if for now, but I will eventually want to install a fresh copy of Windows and can't find the internal hardware drivers for my HP 2000 Notebook (product number C2M42UA) anywhere on HP support website. Before wiping away the unauthorized Win7 install I looked at the device manager and remember Realtec HD audio and Intel HD video and have located those drivers elsewhere on the web, but can't be sure what else I'll need. I do seem to recall that with the bad install the ethernet adapter was without a driver, for example.
Where can I find a list of drivers for which to scavange the web? Looks to me as if a hard drive failure will leave any newer HP computer in worse shape since they replaced the recovery discs with a recovery partition on the hard drive it's meant to restore. Something I should keep in mind in future computer shopping.
This question was solved.
View Solution.

Windows 7 driver download page for your model:
http://support.hp.com/us-en/drivers/selfservice/HP-2000-2b00-Notebook-PC-series/5296210/model/530508...
Remember, when you buy a new laptop they do not give you recovery disks. That has been true for many years. However, there is a Recovery manager that will let you make those disks and if you do that and store them in a safe place you are always able to recover your system. Windows itself also now has very good backup tools including the ability to make a complete system image of the computer in its current state (not factory condition) so there is no real reason you cannot be fully protected against a hard drive crash.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Testing for Hardware Failures (Windows 8)

Hey guys!
I just want to post a quick "How To" guide for hardware issues that occur with windows 8 notebooks and how to test them.
HP Support Assistant and HP PC Diagnostics UEFI both provide access to tests that can check for hardware failures. HP Support Assistant is accessed through Windows and HP PC Diagnostics UEFI is accessed by pressing the F2 key while the computer is starting.
If anybody is detecting any type of hardware issues with there Win8 notebook follow thisDOCUMENT.
You will be able to run test like
HP Battery Check
HP Network Check
HP Hard Drive Check
HP Optical Drive Check
Run-In Test (quickly test the processor, memory, hard drive, battery, WLAN and PCI devices at the same time)
System Tune-Up (comprehensive test of the processor, memory, hard drive, battery, WLAN and PCI devices and video memory)
Hard Disk Test
Memory Test
You can also Testing using HP PC Hardware Diagnostics UEFI
HP PC Hardware Diagnostics UEFI enables you to test the main components on your computer using quick tests or longer, more comprehensive tests. You can use HP PC Hardware Diagnostics UEFI even if the computer does not open to Windows.
THX
This question was solved.
View Solution.

Thanks for the KUDOS!
If you guys have any questions let me know.

Can SunMC send mail alert to sysadmin for any hardware failure?

Hi All
for SunMC 3.61 or 4.0,, Sunmc can send mail alert to sysadmin if hardware failure.
1. I noticed that the email actions from Attribute Editor Actions Panel is not for all the hardware attribute.
is there any way to send mail alert to sysadmin for any hardware failure?
2. does SunMC monitor Sun Fire T2000 hardware fully?

Hi EricTan,
erictan wrote:
Hi All
for SunMC 3.61 or 4.0,, Sunmc can send mail alert to sysadmin if hardware failure.
1. I noticed that the email actions from Attribute Editor Actions Panel is not for all the hardware attribute.
is there any way to send mail alert to sysadmin for any hardware failure?The out-of-the box notifications in SunMC must be set up for every data point on every system, which can be a pain to configure and manage in all but the smallest environments. And as you've noticed, for some hardware attributes there are no "Actions" tabs the allow you to configure email. To gain the features of centralized notification, and to get alarms from all sources of events in SunMC, you should consider installing [PrimeAlert EventAction|http://www.halcyoninc.com/products/EventAction/index.php] . It ships with a 30-day eval license, and if you need any help setting it up, please let me know.
2. does SunMC monitor Sun Fire T2000 hardware fully?Yes, the Tx000 series systems have some of the best hardware support available in SunMC. As an example you can look at a T2000 screenshot and list of hardware info [in this post about SunMC and xVM Ops Center|http://forums.halcyoninc.com/showthread.php?t=109] .
Regards,
Regards,
[email protected]
[http://www.HalcyonInc.com|http://www.HalcyonInc.com]
New !! : [http://forums.HalcyonInc.com|http://forums.HalcyonInc.com] !!

Can HP Pavilion dv5000 series notebook power on from usb keyboard?

My HP Pavilion dv5000 series notebook has a dead monitor. Otherwise it works fine. I've attached an external monitor, usb mouse and keyboard. I'd like to keep the cover closed. Is there a way to power it on without opening the cover to access the power button.
Thank you

windows failds to start. a recent hardware or software change might be the cause. to fix the problem :
status : 0xc000000f
Info : The boot selection failed because a required device is inaccessible.

GT780DXR P_F_N_list_corrupt but suspected hardware failure!?! MSI wont answer!!

Hello and
The other day my computer start to behave really wierd. It happened after i upgraded it with MSIs upgrading program. The laptop is barely 8-9 months old. Now i get the blue screen regardless what i want to do. Either if i would like to execute windows memory test or if i start to reinstall windows it allways stop the operation that i would like to perform by hitihng me with blue screen with PFn_list_missing. I am not newbie and I am sure i can fix most of problems i come accros but this must me some kind of hardware failure since performing any kind of operation is not possible. Well i tried everything and since nothing works I decided to post question for MSI suport team online and here is where actual problem occure. Now i wonder Is there anyone who works for MIS that checks posts we are posting to you @ suport site? Its been 5 days since i posted the request for reparation but still no reply? What i suspect is HDD ( i am allmost 100% certain) or memory failure and I dont want to screw up my 9 month old laptop by MSI only to check and ruin the warranty. What i have whish to do is blogg about how long time it takes for MSI to take sake in their own hands and repair my 8 month old laptop that also have extended warranty by MSI to 2 years? Now either someone will answer me or helpless the way I am I will blog about poor service provided by this HUGE company that stands for quality and great perfomance??? So will anyone from MSI take and answer to my requests in oreder to start repairing my expencive laptop that is broken after 8-9 average usage!!!
Thankfull for Your answer
I am swedish so excuse my english.....

I have just spoken with some woman at
Sweden
Arabygatan 9, 352 46 Växjö
Repairs goods status query or related service questions: +46-776700303
Technical support hotline: +46 406927909
http://www.infocare.se/fullstory.aspx?m=63&amid=217
She told me that in order for them to repair my computer she need me to report failure to You and then that You should be the one who order reparation from them for my coputer. Only and only then i will be able to send my notebook to reparation.
I must say its never ever been so complicated to repair computer that is less, I repeat less then one year old. I will for sure never again buy my product over the internet since i start to realize its allmost impossible to get response and get my computer fixed.
MSI asks me to contact people in sweden that repair their products Service in sweden asks me to contact you and ask you to issue reparation. What a service. I am not ping pong ball to be tossed arround that way. I hope You take care of Your customers better way. If this is best You guys can then i cant other then never ever go MSI way to be honest. Reading swedish forums plenty of people are having problems. I was proud about my laptop but since it only served me for less then one year I am not sure I could recommand it to other people as reliable product that keeps what it promises for money payed.
Now i am stuck with computer thats still covered by your warranty (proudly shown beneeth the keyboard " 2 years msi extended warranty") and I am not sure if its ever gonna get repaired.
Shame Shame

How Do I Downgrade From Windows Vista To XP On A 3000 N100 Series Notebook?

Hello. Here is the problem. I have Windows Vista Pre-loaded on my 3000 N100 Notebook, absolutely dislike this operating system and want to erase and load Windows XP. From reading other forum messages I have learned several things.
1) The install disk On Windows XP Home & Professional will not recognize Sata Hard Drives, when it reaches the point of loading where it looks for the hard drive it "BOMBS OUT" with error messages.
Several options are open .............
1) Log into the BIOS, locate the SATA option, and change to compatibility mode.
2) Have a USB external floppy connected with a Sata Driver on it and when installing Windows XP press the "F6" button when Windows asks for any external drivers you want to load.
Here is the problem with the 3000 N100 Notebook series..........
1)There is "NO SATA OPTION" in the BIOS of the 3000 N100 series notebooks to choose. In this model Lenovo stripped the BIOS down to the bare essentials.......and I Do Mean.... "BARE". The latest BIOS upgrade also has no Sata option. Why they did not offer at least this choice of downgrading to XP is beyond me. LENOVO..... I'm not impressed with your notebook. As usual.... Microsoft has all vendors jumping to their tune..... Nothing but "VISTA" at this point in time. What if you hate it??????
2) I have hunted all over the Lenovo Web Site for a "SATA DRIVER" that would work with a 3000 N100 Notebook, no such critter exists. LENOVO..... Couldn't you have at least offered this???? I'M NOT IMPRESSED.
Has anyone been able to downgrade to Windows XP successfully on a 3000 N100 Series Notebook??? How Did You Do It?? Has Anyone Located A "SATA DRIVER" That Works??? IF So, Please Explain To Me Step-By-Step How I Can Get Rid of Vista and Load XP.
Help........Help.......Help........Help......Help!!!!!!!!!!!
Regards

Hello Himleung. Thank you for answering this message. Where did you find a "Sata Hard Drive Driver" that works?? Perhaps you could pass that along to this message forum in case someone else that has a 3000 N100 (may also work with the N200 series) Notebook wants to downgrade from Vista to Windows XP.
This is what baffles me to no end. The Lenovo web site has every driver you need to load Windows XP on the notebook.....**EXCEPT**..... the Sata HD Driver......**OR**...... the ability in BIOS to change to "compatability mode". Duh!!!..... whats wrong with this story. I have never seen such a weak BIOS as the one in the 3000 N100. If I had known this I probably would have gone to another brand. They should have advertised this notebook as...... "Non-Geek Compatible".
Not knowing exactly how you could forward the driver to me I did the following....... I created a new Web email location that you could use to send the driver as an email attachment. The address is....... [email protected] This address will exist just long enough to obtain the driver..... and then......"Hasta-La-Vista" baby......end of story......as I do not want to be bombarded with ads, trash, or perhaps a virus of some sort..... although.....I'm SURE we have GREAT PEOPLE on this message center.
I'm not familiar with the "NLITE" program you mentioned. Again....perhaps you could mention where I can get it and what I need to do to set the program up to run the driver.
Thanks again, Himleung.
Regards,
Train500

Hardware failure on my iPhone 4s, I want to get a new phone under the NZ consumer guarantees act. How do I go about doing this?

Hello,
My ear speaker has failed in my two year old iPhone 4s. As this is a hardware failure under New Zealands consumers guarantees act apple is liable and is legally obligated to replace my device. Since I ordered my phone online from the apple nz store and New Zealand dosen't have an official apple store, how do I go about making the claim?

Call AppleCare. They will explain your options.

Oracle DB offline after server reboot / hardware failure

Hi,
We have a server that crashed due to hardware failure and although brought back up OK Oracle DB's are no longer mounting. I am not a DBA but it looks bad to me and it seems there are no backups. Can anyone suggest a course of action? This is Oracle 11G XE running on Centos 6. I have put as much detail in as I can and could really do with some advice.
[root@627963 trace]# sqlplus /nolog
SQL*Plus: Release 11.2.0.2.0 Production on Thu Sep 12 23:18:26 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
SQL> connect sys as sysdba;
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size                  2233344 bytes
Variable Size             893389824 bytes
Database Buffers          167772160 bytes
Redo Buffers                5541888 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 10571
Session ID: 62 Serial number: 3
SQL> startup /nomount
SP2-0714: invalid combination of STARTUP options
SQL> startup nomount
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
Alert_XE.log:
Thu Sep 12 21:26:18 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =19
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/xe/dbs/spfileXE.ora
System parameters with non-default values:
sessions                 = 180
memory_target            = 1G
control_files            = "/u01/app/oracle/oradata/XE/control.dbf"
compatible               = "11.2.0.0.0"
db_recovery_file_dest    = "/u01/app/oracle/fast_recovery_area"
db_recovery_file_dest_size= 20G
undo_management          = "AUTO"
undo_tablespace          = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers              = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers           = 4
job_queue_processes      = 4
audit_file_dest          = "/u01/app/oracle/admin/XE/adump"
db_name                  = "XE"
open_cursors             = 300
diagnostic_dest          = "/u01/app/oracle"
Thu Sep 12 21:26:20 2013
PMON started with pid=2, OS id=21388
Thu Sep 12 21:26:20 2013
"alert_XE.log" 342L, 17231C
Thu Sep 12 21:26:20 2013
PSP0 started with pid=3, OS id=21390
Thu Sep 12 21:26:21 2013
VKTM started with pid=4, OS id=21392
VKTM running at (100ms) precision
Thu Sep 12 21:26:21 2013
GEN0 started with pid=5, OS id=21396
Thu Sep 12 21:26:21 2013
DIAG started with pid=6, OS id=21398
Thu Sep 12 21:26:21 2013
DBRM started with pid=7, OS id=21400
Thu Sep 12 21:26:21 2013
DIA0 started with pid=8, OS id=21402
Thu Sep 12 21:26:21 2013
MMAN started with pid=9, OS id=21404
Thu Sep 12 21:26:21 2013
DBW0 started with pid=10, OS id=21406
Thu Sep 12 21:26:21 2013
DBW1 started with pid=11, OS id=21408
Thu Sep 12 21:26:21 2013
DBW2 started with pid=12, OS id=21410
Thu Sep 12 21:26:21 2013
LGWR started with pid=13, OS id=21412
Thu Sep 12 21:26:21 2013
CKPT started with pid=14, OS id=21414
Thu Sep 12 21:26:21 2013
SMON started with pid=15, OS id=21416
Thu Sep 12 21:26:21 2013
RECO started with pid=16, OS id=21418
Thu Sep 12 21:26:21 2013
RECO started with pid=16, OS id=21418
Thu Sep 12 21:26:21 2013
MMON started with pid=17, OS id=21420
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Thu Sep 12 21:26:21 2013
MMNL started with pid=18, OS id=21422
starting up 4 shared server(s) ...
ORACLE_BASE not set in environment. It is recommended
that ORACLE_BASE be set in the environment
Reusing ORACLE_BASE from an earlier startup = /u01/app/oracle
Thu Sep 12 21:26:21 2013
ALTER DATABASE   MOUNT
Thu Sep 12 21:26:24 2013
Sweep [inc][21794]: completed
Sweep [inc][21793]: completed
Sweep [inc2][21794]: completed
Successful mount of redo thread 1, with mount id 2707110077
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE   MOUNT
Thu Sep 12 21:26:25 2013
ALTER DATABASE OPEN
Beginning crash recovery of 1 threads
Started redo scan
Completed redo scan
read 93 KB redo, 34 data blocks need recovery
Started redo application at
Thread 1: logseq 241, block 21190
Recovery of Online Redo Log: Thread 1 Group 1 Seq 241 Reading mem 0
Mem# 0: /u01/app/oracle/fast_recovery_area/XE/onlinelog/o1_mf_1_8kxhwjco_.log
Exception [type: SIGBUS, Non-existent physical address] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8, _wordcopy_bwd_dest_aligned()+280] [flags: 0x0, count: 1]
Errors in file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_ora_21440.trc (incident=22593):
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
Incident details in: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22593/XE_ora_21440_i22593.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70, kcbs_dump_adv_state()+946] [flags: 0x0, count: 2]
Errors in file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_ora_21440.trc (incident=22594):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+946] [SIGSEGV] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70] [Address not mapped to object] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
Incident details in: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22594/XE_ora_21440_i22594.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Dumping diagnostic data in directory=[cdmp_20130912212627], requested by (instance=1, osid=21440), summary=[incident=22593].
Errors in file /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22593/XE_ora_21440_i22593.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00602: internal programming exception
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+946] [SIGSEGV] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70] [Address not mapped to object] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
PMON (ospid: 21388): terminating the instance due to error 397
System state dump requested by (instance=1, osid=21388 (PMON)), summary=[abnormal instance termination].
System State dumped to trace file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_diag_21398.trc
Dumping diagnostic data in directory=[cdmp_20130912212628], requested by (instance=1, osid=21388 (PMON)), summary=[abnormal instance termination].
Instance terminated by PMON, pid = 21388
Thu Sep 12 21:39:03 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =19
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/xe/dbs/spfileXE.ora
System parameters with non-default values:
sessions                 = 180
memory_target            = 1G
control_files            = "/u01/app/oracle/oradata/XE/control.dbf"
compatible               = "11.2.0.0.0"
db_recovery_file_dest    = "/u01/app/oracle/fast_recovery_area"
db_recovery_file_dest_size= 20G
undo_management          = "AUTO"
undo_tablespace          = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers              = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers           = 4
job_queue_processes      = 4
audit_file_dest          = "/u01/app/oracle/admin/XE/adump"
db_name                  = "XE"
open_cursors             = 300
diagnostic_dest          = "/u01/app/oracle"
Thu Sep 12 21:39:05 2013
PMON started with pid=2, OS id=2483
Thu Sep 12 21:39:05 2013
PSP0 started with pid=3, OS id=2489
Thu Sep 12 21:39:06 2013
VKTM started with pid=4, OS id=2546
VKTM running at (100ms) precision
Thu Sep 12 21:39:06 2013
GEN0 started with pid=5, OS id=2550
Thu Sep 12 21:39:06 2013
DIAG started with pid=6, OS id=2552
Thu Sep 12 21:39:06 2013
DBRM started with pid=7, OS id=2554
Thu Sep 12 21:39:06 2013
DIA0 started with pid=8, OS id=2556
And the tracefile:
Trace file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_ora_21440.trc
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
ORACLE_HOME = /u01/app/oracle/product/11.2.0/xe
System name:    Linux
Node name:      <blah>
Release:        2.6.32-358.14.1.el6.x86_64
Version:        #1 SMP Tue Jul 16 23:51:20 UTC 2013
Machine:        x86_64
Instance name: XE
Redo thread mounted by this instance: 1
Oracle process number: 24
Unix process pid: 21440, image: <blah>(TNS V1-V3)
*** 2013-09-12 21:26:25.858
*** SESSION ID:(62.3) 2013-09-12 21:26:25.858
*** CLIENT ID:() 2013-09-12 21:26:25.858
*** SERVICE NAME:() 2013-09-12 21:26:25.858
*** MODULE NAME:(<Blah> (TNS V1-V3)) 2013-09-12 21:26:25.858
*** ACTION NAME:() 2013-09-12 21:26:25.858
Thread 1 checkpoint: logseq 241, block 2, scn 8960531
cache-low rba: logseq 241, block 21190
    on-disk rba: logseq 241, block 21377, scn 8979221
start recovery at logseq 241, block 21190, scn 0
*** 2013-09-12 21:26:25.869
Started writing zeroblks thread 1 seq 241 blocks 21377-21384
*** 2013-09-12 21:26:25.870
Completed writing zeroblks thread 1 seq 241
==== Redo read statistics for thread 1 ====
Total physical reads (from disk and memory): 4096Kb
-- Redo read_disk statistics --
Read rate (ASYNC): 93Kb in 0.01s => 9.13 Mb/sec
Longest record: 2Kb, moves: 0/242 (0%)
Change moves: 2/26 (7%), moved: 0Mb
Longest LWN: 8Kb, moves: 0/57 (0%), moved: 0Mb
Last redo scn: 0x0000.00890313 (8979219)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 34/34 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 377/542 = 0.7
*** 2013-09-12 21:26:25.872
KCRA: start recovery claims for 34 data blocks
*** 2013-09-12 21:26:25.873
KCRA: blocks processed = 34/34, claimed = 34, eliminated = 0
*** 2013-09-12 21:26:25.874
Recovery of Online Redo Log: Thread 1 Group 1 Seq 241 Reading mem 0
*** 2013-09-12 21:26:26.055
Exception [type: SIGBUS, Non-existent physical address] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8, _wordcopy_bwd_dest_aligned()+280] [flags: 0x0, count: 1]
Incident 22593 created, dump file: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22593/XE_ora_21440_i22593.trc
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
Incident 22594 created, dump file: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22594/XE_ora_21440_i22594.trc
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+946] [SIGSEGV] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70] [Address not mapped to object] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF

Hi Guys,
I have copied a backup script below that it turns out has been running every night at midnight. Where does this go, how do I know if it has worked and how can I use it to restore?
#!/bin/sh
# The script assumes that user can connect using "/ as sysdba" and Flash
# Recovery Area is enabled.
# =================
# Backup procedure
# =================
#    For database in NoArchiveLog mode, database is shutdown and an offline
#    backup is done;
#    For database in Archive log mode, online backup is done.
#    During the backup procedure, the script stores flash recovery area
#    location by saving complete initialization parameter to
#    ?/dbs/spfile2init.ora file. This will be used during restore operation
#    to find Flash Recovery Area location. If this file is lost, then user must
#    enter Flash Recovery Area location during restore operation.
#    Two backups are maintained in Flash Recovery Area and the corresponding
#    log files for last two backup job are saved in
#    $HOME/oxe_backup_current.log and $HOME/oxe_backup_previous.log
user=`/usr/bin/whoami`
group=`/usr/bin/groups $user | grep dba`
if test -z "$group"; then
   if [ -f /usr/bin/zenity ]
   then
        /usr/bin/zenity --error --text="$user must be in the DBA OS group to backup the database."
   elif [ -f /usr/bin/kdialog ]
   then
        /usr/bin/kdialog --error "$user must be in the DBA OS group to backup the database."
   elif [ -f /usr/bin/xterm ]
   then
       echo "Operation failed. $user must be in the DBA OS group to backup the database."
       echo -n "Press any key to exit"
       read userinp
   fi
   exit 0
fi
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe
export ORACLE_SID=XE
export PATH=$ORACLE_HOME/bin:$PATH
TMPDIR=/tmp
rman_normlog=${TMPDIR}/rman_normlog$$.log
#Fix a logfile for current, previous run and spfile2init.ora
sqlplus /nolog > $rman_normlog << EOF
   connect / as sysdba;
   set echo off;
   set head off;
   set serveroutput on;
   set linesize 515;
   declare
      l1 varchar2(512);
   begin
      l1 := dbms_backup_restore.normalizeFilename('spfile2init.ora');
      dbms_output.put_line('-----------------');
      dbms_output.put_line(l1);
      dbms_output.put_line('-----------------');
   end;
EOF
rman_spfile2init=`grep "spfile2init.ora$" $rman_normlog`
rm -f $rman_normlog
rman_backup_current=$HOME/oxe_backup_current.log
rman_backup_prev=$HOME/oxe_backup_previous.log
#Choose a temporary log for this run
rman_backup=${TMPDIR}/rman_backup$$.log
echo XE Backup Log > $rman_backup
#Check if flash recovery area is enabled
rman_fra=${TMPDIR}/rman_fra$$.log
sqlplus /nolog > $rman_fra << EOF
   connect / as sysdba;
   set head off;
   set echo off;
   set trimspool on;
   set linesize 512;
   select '$' || count(*) || '$' from v\$parameter
    where upper(name)='DB_RECOVERY_FILE_DEST'
      and value is not null;
EOF
fra=`grep "^$.*$" $rman_fra`
rm -f $rman_fra
if [ X$fra = X\$1\$ ]; then
   failed=false;
else
   failed=true
   errstr="flash recovery area is not enabled"
fi;
if [ $failed = 'false' ] ; then
   #Check the mode of database
   rman_log_mode=${TMPDIR}/rman_log_mode$$.log
   sqlplus /nolog > $rman_log_mode << EOF
      connect / as sysdba;
      set head off;
      set echo off;
      set trimspool on;
      set linesize 512;
      select '$' || log_mode || '$' from v\$database;
EOF
   mode=`grep "^$.*$" $rman_log_mode`
   rm -f $rman_log_mode
   case $mode in
      \$ARCHIVELOG\$)
      echo "Doing online backup of the database."
      rman target / >> $rman_backup << EOF
         set echo on;
         configure retention policy to redundancy 2;
         configure controlfile autobackup format for device type disk clear;
         configure controlfile autobackup on;
         sql "create pfile=''$rman_spfile2init'' from spfile";
         backup as backupset device type disk database;
         configure controlfile autobackup off;
         delete noprompt obsolete;
EOF
      if [ $? = 0 ]; then
         failed=false;
      else
         failed=true
         errstr="RMAN error: See log for details"
      fi;
      rman target / >> $rman_backup << EOF
         sql 'alter system archive log current';
EOF
      \$NOARCHIVELOG\$)
      echo "Warning: Log archiving (ARCHIVELOG mode) is currently disabled. If"
      echo "you restore the database from this backup, any transactions that take"
      echo "place between this backup and the next backup will be lost. It is"
      echo "recommended that you enable ARCHIVELOG mode before proceeding so "
      echo "that all transactions can be recovered upon restore. See the section"
      echo "'Enabling ARCHIVELOG Mode...' in the online help for instructions."
      echo "Backup with log archiving disabled will shut down and restart the"
      echo -n "database. Are you sure [Y/N]?"
      gotit=false
      while ! $gotit; do
        read userinp
        if [ "$userinp" = "Y" -o "$userinp" = "y" -o \
             "$userinp" = "n" -o "$userinp" = "N" ]; then
          gotit=true
        fi
      done
      if [ "$userinp" = "n" -o "$userinp" = "N" ]; then
         rm -f $rman_backup
         exit -1;
      fi
      echo "Backup in progress..."
      rman target / >> $rman_backup << EOF
         set echo on;
         shutdown immediate;
         startup mount;
         configure retention policy to redundancy 2;
         configure controlfile autobackup format for device type disk clear;
         configure controlfile autobackup on;
         sql "create pfile=''$rman_spfile2init'' from spfile";
         backup as backupset device type disk database;
         configure controlfile autobackup off;
         alter database open;
         delete noprompt obsolete;
EOF
      if [ $? = 0 ]; then
         failed=false;
      else
         failed=true
         errstr="RMAN error: See log for details"
      fi;
      errstr="Unknown database mode $mode"
      failed=true;
   esac;
fi;
#Save the error string in the log
if [ $failed = 'true' ]; then
   echo ${errstr}. >> $rman_backup
fi;
#Save the last run as previous
if [ -f $rman_backup_current ]; then
   mv -f $rman_backup_current $rman_backup_prev
fi;
#Save the current run
mv -f $rman_backup $rman_backup_current
#Display the result to user
if [ $failed = 'true' ] ; then
   echo '==================== ERROR ========================='
   echo '             Backup of the database failed          '
   echo '==================== ERROR ========================='
   echo ${errstr}.
   echo Log file is at $rman_backup_current.
else
   echo Backup of the database succeeded.
   echo Log file is at $rman_backup_current.
fi
#Wait for user to press any key
echo -n "Press ENTER key to exit"
read userinp

I was directed to adobe to download CS4 on my new iMAC after hardware failure on PC. The valid CS4 serial number for the PC is not recognized by Adobe, even though I downloaded all the software successfully. They gave me a free 30 day trial.........Does

I was directed to adobe to download CS4 on my new iMAC after hardware failure on PC. The valid CS4 serial number for the PC is now not recognized by Adobe, even though I downloaded all the software successfully on the new iMac.. They gave me a free 30 day trial on the new iMAC.........Does this mean I have to spend a lot of money to update and activate the latest CS release on the new machine ??????

Purple Lobster your Creative Suite 4 serial number is for Windows or Mac only. If you were previously using it on Windows then it is likely you have a Windows license. You can verify by checking your serial number at http://www.adobe.com/. You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
If you wish to run Adobe Creative software on your new iMac then I would recommend a Creative Cloud complete or single application membership. You can find more details at https://creative.adobe.com/plans. There is also a 30 day trial available for the Creative Cloud if you wish to evaluate the newest versions of the Adobe Creative applications.

TS3694 I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?

I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?

Restore iPhone with current iTunes on computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution. Of if easier for you, take receipt and iPhone, box and everything and return to where you bought it.

I suffered a hardware failure on my PC, and have moved to an iMac. I own Adobe creative Suite 4 for Windows. Can I transfer the license to my new iMAC without the huge expense of buying a new license?

I suffered a hardware failure on my Dell desktop PC, and have moved to iMac. I own Adobe creative Suite 4 Design Premium for Windows. Can I transfer the license to my new iMAC without the huge expense of buying a new license or purchasing a month to month option?

you need a cross-grade, but adobe only offers free cross-grades for current releases, Order product | Platform, language swap

What is procedure to recover music after ipod hardware failure

My uncle's ipod had a hardware failure and died. Apple genius bar gave him an estimate for repair. But he has not repaired it yet. At that time, his music was still playable within iTunes. Then my uncle's tried to transfer music library to his daughter's PC. I do not know exactly what he did but, itunes produced a file called library.XML containing a list of his music titles along with the file paths to each item. At this point, all his music is not playable on his PC nor his daughers's PC. What was can be done with the Library.xml file? What is the purpose of library.xml. After iTunes generates library.xml, what should be done with it? My uncle wants to recover is music library. What should he do? Please help. Thank you.

columbus new boy wrote:
Hi,
Just got my new Macbook Pro, and I'm a little lost, I too don't understand how to post a new question even after reading your reply. Can you please help clarify it?
Thanks.
On the main Apple Discussions page, select MacBook Pro under Computing Hardware. There you'll find 12 individual forums each with a name and description, e.g.
Using your MacBook Pro (Late 2008 and 2009)
If your question doesn't fit in other categories.
Choose the forum where the description suits the type of question you want to ask. Just above the list of threads will be a link to *Post New Topic*, click this to proceed.
Use the subject line to give a concise description of your issue rather than something like "Help me!" as there are plenty of users who have experience with specific topics who will scan the subject lines and may ignore anything they don't immediately recognise as an area they can help with.
tt2

IPhone hardware failure in 1 yr 2 months! Can anything be done for replacement?

I had purchased an iPhone 5 in Nov 2012 here in India (Bangalore) for ~ Rs 45,000.
However for the past few months it started crashing mysteriously. For the last few days the frequency of crash increased to 20-30 times a day (from the previous 2-3 times a week). Recently after a crash, it rebooted upto the "Recovery Mode" screen only.
I tried with the latest iTunes to do recovery but it always failed at the _end_ of writing the new software. I even tried the DFU mode, but that too fails right at the end of writing the new software. Sometimes it gave error 12 and sometimes error 9. I've tried different USB cables just to make sure there was no problem there but to no avail!
I then showed it to the Apple service center folks here (service is provided by an Apple authorised service unit - Ample) but they too were unable to fix it. They said it was a "rare" internal hardware failure. They are asking me to cough up Rs 21,000 for a replacement unit!
It's barely 2 months out of the warrannty period when the dam phone crashed. This is real poor quality of service from Apple. Is there anything I can do to get my unit replaced? Is there an escalation I can do to get someone's attention in fixing my issue?
TIA for any tips.

For the first part, that does beg the question whether this is something that is more of a problem with iCloud than it is other providers, for whatever reason.
I'm not a huge fan of anecdotal "evidence" in general, but iCloud mail does seem to have the worst reputation for missing messages when compared to Gmail or even Outlook.com, at least going by a quick search. For other iCloud mail users, does this ever concern you? Any former iCloud users who left for similar reasons?

Hardware Failure - Cannot login to Folio Builder

I was having problems with DPS App Builder - that problem was mysteriously solved.
Yesterday I had a catastrophic hardware failure when my MacBook Pro's screen died. I had to move my harddrive to a new MacBook Pro.
After moving my harddrive, I could no longer login to the Folio Builder Panel in Indesign CS6 (CC subscription). I decided to
deactivate, uninstall InDesign and reinstall, removing preferences, and ensuring that all updates had been applied. I have
done that I am still getting the message:
Sign In has failed. Network failure. Then after I hit OK, I get: Sign Out has failed. Network failure.
I can login to the Digital Publishing Suite Dashboard and the Digital Publishing Folio Producer, but I cannot
login to the Folio Buidler Panel. DPS App Builder continues to work without a problem.
It seems as if these tools are TOO TOUCHY which leads to a lot of wasted time.
What's going on?

Try This:
Quit InDesign and any other CS apps.
Use the Activity Monitor to quit the CS5ServiceManager or CS5.5Service Manager.
Next delete this file based on version: (Back up the file just in case.)
Note:
For example:
/Users/"your user name"/Library/Application Support/Adobe/CS5ServiceManager/preference/csxs2.pref
/Users/"your user name"/Library/Application Support/Adobe/CS5.5ServiceManager/preference/csxs2.pref
Then remove this item from the Keychain Access based on version: Adobe CS5 renga or Adobe CS5.5 renga.
To remove from the keychain, navigate to: /Applications/Utilities and launch the Keychain Access.app
If the lock icon in the upper left appears locked, click it and enter your password to unlock it.
Select the “login” item in the Keychains list in the upper left.
Select “Passwords” from the category list.
Type “renga” in the search field in the upper right.
Lastly, select any matches and press the Delete key.

Frequent Hardware failure in HP-G Series Notebook

Similar Messages

Maybe you are looking for