Fresh install ArchLinux WiFi not showing (icon)

Don't know whether this is a specific ArchLinux or Cinnamon issue but I'm new to Arch and decided to install (step- by step):
- ArchLinux
- SLiM
- CInnamon
Everything is working correctly, I'm a really happy man now, except for a few little thing(s)
When I boot my laptop I don't see the WiFi-icon like I was used to on Cinnarch/ArchBang etc. When I plugin the ethernet cable I do have internet, and also when I do: #sudo wifi-menu I can select my connection (WiFi) and enter my WPA(2)-key > works. Thought it must be something that I forgot to install (and checked the Wiki) but as far as I can see I did it correctly (network-manager, network-manager-applet, cdr). I even (re?)added my user account to the group network/audio (because my volume button will not stick either).

I don't quite understand what is going on here.  You say that you don't have an "icon" in the first post, but then in the third post you say that you can see that network manager is active because it is green.  What is green? 
Also, in the first post you seem to partially indicate that you are using network manager, and partially that you are using netctl.  There two things will conflict with each other of you are trying to use both.  You can only use one thing at a time.  So if you previously enabled something like [email protected] and then started using wifi-menu, and then set up NetworkManager.service, and didn't disable/stop the others as you go along, you are undoubtedly going to run into issues.

Similar Messages

  • MAVERICK INSTALLED AND LAUNCHPAD NOT SHOWING APPLICATION ICONS

    maverick installed and launchpad not showing icons

    I have the same problem on my NMac Mini but not on my iMac.

  • WIFI not showing up

    Hi 
    I was having an issue with my WIFI, so uninstalled some adapter from device manager under network adapters after which my WIFI didn't even show up.  I tried running all drivers for WIFI for DM4-3050us but WIFI didn't show up. Can you help me please?

    Hi @sundar_jp 
    Welcome to the HP Support Forums!
    I understand that you are having trouble with your wifi not showing up. Assuming that it was working previously, a good first step would be to try a system restore to a point from when the wireless was still working.
    Using Microsoft System Restore (Windows 7)
    Other than that you can try these:
    Resolving Universal WLAN, Wireless, and Wi-Fi Errors
    Assuming that resolves the driver issue in device manager you should be good to go. If it does not, then I would recommend that you call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    If on the other hand you resolve the driver problem but you are still having trouble connecting, then work through these steps and see if it helps.
    Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
    Also, you can look at the power management for your wireless adapter:
    Disable the Power Off option for the adapter:
    1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)
    2. Expand the Network adapters.
    3. Right click on the Ethernet/Wireless Adapter and click Properties.
    4. Click the Power Management tab.
    5. Remove the check mark beside Allow the computer to turn off this device to save power.
    6. Click OK.
    7. Test.
    Forget the network: (Windows 7)
    1. Press Start.
    2. Type Manage wireless networks and click the application at the top of the start menu.
    3. Right click on the network and click Remove network.
    4. Confirm the warning by click OK.
    Reset the TCP/IP settings on your PC:
    1. Go to your start screen/menu and type CMD.
    2. Right click on the command prompt icon and chose Run as administrator.
    3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
    4. Restart your PC and test.
    It may also help to reset the winsock catalogue:
    1. Go to your start screen/menu and type CMD.
    2. Right click on the command prompt icon and chose Run as administrator.
    3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
    4. Restart your PC and test.
    Reinstall the network adapter drivers:
    1. Download the drivers from here but do not run them yet.
    2. Go to your start screen/menu and type Device Manager.
    3. Expand Network adapters.
    4. Right click on the wireless adapter and choose Uninstall.
    5. Run the downloaded drivers from step 1.
    6. Restart your PC and test.
    Test an ethernet connection:
    Self explanatory. Test if the issue persists on a wired connection to rule out the wireless adapter hardware so troubleshooting can be directed towards the right areas.
    Test another connection:
    Many people rule out their home network as an issue if another device is working on the same network. Networking is not that simple. Each device interacts differently with your router or modem and it is impossible to rule out settings in that device until the notebook has been tested on another network.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • My mac book pro load system and not show icons only show pointer

    my mac book pro load system but not shows icons only show pointer

    Can you open Applications by navigating to the Applications folder via the Finder? When you write that your computer doesn't show icons, do you mean your Dock icons? Can you see the Dock as all?
    Need just a little more information...
    Clinton

  • LaunchPad Does Not Showing icons Of Few Apps

    Hi Guys I Got A Realy Bug Problem, Launchpad does not showing icons on some apps, but names - it does.
    its realy annoying, here is picture of the problem(maybe in file not so sure):

    So here is very simple solution to the problem... i just did on my MBP  and it worked
    Open application folder --   if you have launchpad icon on your dock - good   if not then drag the icon ( rocket icon) from application folder  to Dock. 
    Now, whatever icon is missing, drag that icon from Application folder to the launchpad icon on the dock.  Then check if the icon is visible now by clicking on launchpad button or F4 key.
    For me it worked flawlessly.
    let me know

  • I have just installed CS5 and my option for installing actions is not showing up,....how do I install them?

    I have just installed CS5 and my option for installing actions is not showing up,....how do I install them?

    I just didn't have my actions palette checked.  Done.  Thanks.

  • I want to reinstall an app fresh install from iTunes not from my iCloud, I go to manage storage I stop backup and delete app by turning green button off, but when I ask to download it again from iTunes it is only downloading it from my iCloud. help?

    I want to reinstall an app fresh install from iTunes not from my iCloud, I go to manage storage I stop backup and delete app by turning green button off, but when I ask to download it again from iTunes it is only downloading it from my iCloud.
    Please assist
    Thx

    You don't really delete app that way, that way to stop backup for that app in icloud.
    You need to delete it from your home screen and then while it still will look like download from icloud - app will start fresh.
    However if app uses any account sign in the stuff that is attached to sign in will come back, so if you do not want to you need to use
    fresh account as well.

  • Privacy Badger is installed but does not show. Shows in Chrome & IE

    Privacy Badger is installed but does not show. Shows in Chrome & IE. Using Firefox 36 & Windows 7 Pro. All updates are current.

    Which version of Privacy Badger do you have installed?
    Is it '''enabled''' in the Add-ons Manager in Firefox?
    The 0.1.4 version from AMO - https://addons.mozilla.org/en-us/firefox/addon/privacy-badger-firefox/ - is an old version that doesn't have an "UpdateURL" to tell it where to get an update from. For some reason EFF hasn't updated the version at the official Mozilla Add-ons website since June 2014 - "Firefox 21 and later" - but only up to Firefox 29.0a1 ''(the pre-release alpha tester version from like late-2013)''.
    The 2.5 version from EFF - https://www.eff.org/privacybadger - is "spec'd" as compatible thru the future Firefox 40.0 version. That one should work for you. If it doesn't, you'll need to contact EFF for support for their add-on - they made it and should support it.

  • Open with menu not showing icons

    Hi, since i installed Mavericks i've been experiencing some issues, and the one i need to solve right know is this:
    In this example is only with media players but it happens with other apps too, both system and non-system apps. I've tried this command:
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain user;killall Finder;echo "Open With has been rebuilt, Finder will relaunch"
    that is used to delete duplicated items on "Open With" menu but it doesn't solve this Icon issue.. I also deleted com.apple.LaunchServices.plist  from ~/Library/Preferences/  and it didn't helped. I don't know what to do anymore.
    Please help me out with this, i don't want to do a fresh install again.

    OS X does that constantly. If you click anywhere away from the contextual menu to close it, then perform the same right click, then they'll show.

  • Manually Installed Agent is not showing up in the Operations Manager Console Under Pending Management.

    Hi Community,
    I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment,  we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
    VMware machine running Windows Server 2008R2.
    The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
    ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
    Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
    Configuration
    Supported?
    Agent-less monitoring
    No
    After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
    each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
    but it didn't matter how many times I try the servers never show up.
    I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
    --> http://technet.microsoft.com/en-us/library/hh212853.aspx
    I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
    the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
    went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
    of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
    I went to the Event Viewer and I found one particular event that caught my attention, see below :
    Log Name:      Operations Manager
    Source:        Health Service Modules
    Date:          6/12/2014 12:48:19 PM
    Event ID:      11551
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      MyManagementServer
    Description:
    Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Health Service Modules" />
        <EventID Qualifiers="49152">11551</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
        <EventRecordID>1945680</EventRecordID>
        <Channel>Operations Manager</Channel>
        <Computer>MyManagementServer</Computer>
        <Security />
      </System>
      <EventData>
        <Data>MyManagementServe</Data>
        <Data>0x800706BA</Data>
        <Data>The RPC server is unavailable.</Data>
      </EventData>
    </Event>
    Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
    Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
    There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
    My main goal is to have all the servers showing up in the Operations Manager Console.
    So thanks all in advance !
    Oscar Loria

    So you can ping and nslookup from your ms to these agents and vice versa right?  I wouldn't do a manual install, I would push the agent from the management server.  You can uninstall the agent manually, or use cleanmom to get rid of them.  Then
    do an install from the console.  When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
    From Holmans post on this:
    e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    The MOM Server could not execute WMI Query "(null)” on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    8004100A 
    800706BA
    1.  Ensure agent push account has local admin rights 
    2.  Firewall is blocking NetBIOS access.  If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed.  We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.  
    3.  Inspect WMI service, health, and rebuild repository if necessary 
    4.  Firewall is blocking ICMP  (Live OneCare) 
    5.  DNS incorrect 
    http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • Dvt alert not showing icons on graph

    I am showing icons on the line graph with the help of dvt:alert component. Code snippet:
    Alert map:
    public Map getAlertMap() {
    Alert alert1=new Alert();
    //alert1.setXValue("2011-10-05 10:25:34");
    alert1.setXValue("20");
    alert1.setYValue(48.00);
    alert1.setId("al1");
    Alert alert2=new Alert();
    // alert2.setXValue("2011-10-06 12:56:09");
    alert2.setXValue("25");
    alert2.setYValue(39.00);
    alert2.setId("al2");
    Alert alert3=new Alert();
    alert3.setXValue("2011-10-07 12:5:09");
    alert3.setYValue(39.00);
    alert3.setId("al1");
    alertMap.put(1, alert1);
    alertMap.put(2, alert2);
    alertMap.put(3, alert3);
    return alertMap;
    Graph data:
    public List getLineGraphData() {
    Object [] a = new Object[]{"10","20","30","40"};
    // Object [] b = new Object[]{"USD","","",""};
    Object [] c = new Object[]{32.00,48.00,39.00,47.00};
    for (int i = 0; i < 4; i++) {
    lineGraphData.add(new Object[]{a[i],null,c});
    return lineGraphData;
    Jsff:
    <dvt:lineGraph id="lineGraph1" subType="LINE_VERT_ABS"
    tabularData="#{pageFlowScope.DatapointsChartBean.lineGraphData}">
    <dvt:background>
    <dvt:specialEffects/>
    </dvt:background>
    <dvt:graphPlotArea/>
    <dvt:seriesSet>
    <dvt:series/>
    </dvt:seriesSet>
    <dvt:o1Axis/>
    <dvt:y1Axis/>
    <dvt:legendArea automaticPlacement="AP_NEVER"/>
    <dvt:alertSet alertMap="#{pageFlowScope.DatapointsChartBean.alertMap}"/>
    </dvt:lineGraph>
    The same code is working in different project while its not working on my application. I doubt whether its an issue with adf library or web.xml entry.
    I am able to see graph but not icons. Can someone help me in this, and please tell me what adf libraries are requried for dvt:alert which is different from dvt:lineGraph

    Very strange!
    It should be safe to remove the file. As for the icons being gone, click on Finder in your dock, then go to the "Finder" menu, right next to the  in your menubar. Select "Preferences..." In the window that appears, make sure the boxes are checked that refer to the icons that should show on your desktop.
    If that doesn't fix it, try creating a new user account on your Mac.
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
    Log into that account and see if icons show up on your desktop. If so, there might be a problem with the preferences and settings files in your original user account.
    Let us know if that helps!

  • Subversion plugin // 11.1.1.1.0 not showing icons in app nav

    Hi,
    I am using Subversion plugin with JDev 11.1.1.1.0 but it does not show Subversion related overlayed icons in app nav (e.g. a file is modified etc.)
    If i use Jdev 11.1.1.3.0, i can see the icons. I was wondering if there was a bug in 11.1.1.1.0 Subversion plugin. I cannot upgrade to Jdev 11.1.1.3.0 because of production support and must stay on 11.1.1.1.0.
    Any help from the QA or Susan Duncan's team would be helpful.
    Thanks,

    Tried that several times John. Tried again after you asked me to. Even created a new directory etc. and checked out from SVN. Not sure what is going on.
    Ok, i found a workaround.
    Tools->PReferences->Versioning->General->Env Settings uncheck overlay icons and labels hit ok
    and then again, do the same thing but this time check the icons to make sure icon and labels are used.
    This works for me.
    Thanks,
    Edited by: user8565698 on Nov 3, 2010 3:57 PM

  • Firefox not show icon pictures in some website

    Firefox not show any icon pictures in some website :
    firefox :
    http://s11.postimg.org/kpllr7aib/image.png
    chromium :
    http://s6.postimg.org/gwz0d029d/image.png

    Those pages on Github use an Octicon font where a special glyph is selected via a class name.
    *https://github.com/styleguide/css/7.0
    Make sure that you allow pages to choose their own fonts.
    *Edit > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

  • Installed Specctr, but not showing in PS CC Extensions

    I've purchased Specctr and have followed instructions for installations.
    I've installed in Extension Manager. See below:
    But when I go to Window > Extensions, it does not show the Specctr tool there.
    Do you know why this is?

    Why didn't you attach image here directly? I can't see the two images.
    Please check whether you can find specctr folder in "/Library/Application Support/Adobe/CEPServiceManager4/extensions" (for PS CC) or "/Library/Application Support/Adobe/CEP/extensions" (for PS CC 2014). If yes, Extension Manager has done its work. You have to contact specctr support.

  • Software downloads mount drive but do not show icons to drag into applications folder

    I downloaded Flash this weekend and Logos 5 today. Both downloaded and the drives mounted, but the drives did not show the software package to be dragged into my application folder. In the case of Flash, the folder header was there, but the space below, where the Flash app was supposed to be was blank. In the case of Logos, when I opened the drive, the only thing visible was the arrow between the app and the shortcut to the applications folder. There was nothing to grab and drag either. Any ideas for me?

    3rd party software uses all kinds of different ways to get installed.
    Some provide installers you double click on inside the mounted .dmg.  And to keep things interesting, different vendors use different installer utilities
    Some include an Alias pointing at the Applications folder.
    Some just give you the App and you figure out what to do with it (if you are lucky, these sometimes include a README file that tells you want you should do).
    This is life outside the Mac App Store.

Maybe you are looking for