FRM-40815 Variable Global.Nodename doesnot exists

Hi there,
i am using oracle Dev suite 10g, when i create new form module in form builder, it is runing properly but when i try to open existing forms, and when i run those forms , it generate the following error:
FRM-40815 Variable Global.Nodename doesnot exists
plz help me with that......
thanks in advance

Well, the obvious answer is that the "Global.Nodename" global variable referenced by your Form doesn't exist. One of the drawbacks to using a Global Variable is that if you haven't instanciated (created) the variable, it does not produce a design time error; they only produce runtime errors if the variable doesn't exist.
when i try to open existing forms, and when i run those forms , it generate the following error:Are you running the existing forms from the Forms Builder? If so, your applciation may be written so that it creates Global Variables during initial login or through the selection of a menu option, etc. If this is how your application works, you won't be able to run your Form from the Forms Builder unless you know what the values of these Global Variables are and you set them temporarily in your Form using the Default_Value() built-in. If you need more information on using Global Variables, I recommend you search the Form Help system.
Craig...

Similar Messages

  • FRM-40815: Variable "Global.OLD_ITEM_CATEGORY" does not exist.

    Hi,
    I am using Dev suite 10g and R12 Apps.
    Standard Form: POXRQERQ -Enter Requisitions GUI
    While we done some personalization on that, getting error -> FRM-40815: Variable "Global.OLD_ITEM_CATEGORY" does not exist. while entering some specific item's not for all items.
    if i disable the forms perso, the message isn't come.
    I checked all over the personalization, but there is no scope of using OLD_ITEM_CATEGORY anywhere in form personalization.
    Can you please help me on this.
    Regards,
    Sam
    Edited by: 951991 on Nov 20, 2012 5:37 AM

    Global.OLD_ITEM_CATEGORY" does not exist
    The error is coming as you are using :Global.OLD_ITEM_CATEGORY inaccessing the values while the item is not initialized earlier
    you just add
    :Global.OLD_ITEM_CATEGORY:=null;
    at the when-new-form-instance.
    then err will not come

  • FRM-40815: Form Error, using CUSTOM.pll

    Hello,
    I am trying to customize WIP Lot Transactions Oracle Standard Form using CUSTOM.pll.
    Upon navigating to one of the 3 blocks in the form(RESULTING_LOT), I am getting following error message:
    "FRM-40815: Variable GLOBAL.CLRREC_NOVALIDATE does not exist"
    This global variable is not used in CUSTOM.pll at all. But is initialized and used in the standard form only.
    When custom code is turned off, there is no error message.
    Please advise.
    Thanks,
    Krishna.

    Hi,
    Thanks for the response.
    I have created a custom profile and attached it users and Profile value has the organization names.I want the User A with Org1 value in the profile to see all the GL Batches which is created by any other user who belongs to only Org1. Say another user User B with Org2 as the profile value should not see any GL batches created by any other user in the GL Journal Form belonging to other Org's.I'm able to restrict the batches using the below query using the personalizations in the Record Group for the Batch Name.But if the user doesnt give any search criteria and then selects Find then the main form displays all the batches. Hence I want to overide the Data Block where to display accordingly.
    select a.name from gl_je_batches a
    where 1=1
    and a.created_by in (select b.user_id from
    fnd_user b,
    fnd_profile_option_values c,
    fnd_profile_options d
    where c.profile_option_id =d.profile_option_id
    AND c.level_value = b.user_id
    AND profile_option_name='KAP_USER_ORGANIZATION'
    AND c.profile_option_value =(select profile_option_value
    from fnd_profile_option_values e
    where e.level_value =fnd_profile.value('USER_ID')
    and profile_option_id=d.profile_option_id)
    Thanks,
    Ashwini.

  • FRM-40815

    Hi,
    I get this error when i am submiting concurrent request set.
    FRM-40815: Variable GLOBAL TEMPLATES_ENABLED does not exist
    But i don't get this error while logged in as sysadmin. I get this only as normal user.
    There are some patches recommended by metalink. But i was wondering why it is not coming for Sysadmin.
    I am on 11.5.10

    check metalink note (FRM-40815: Variable GLOBAL TEMPLATES_ENABLED does not exist )Doc ID: Note:335975.1
    Apply ATG CU2(4125550) or 11.5.10.2(3460000) as avenues to obtain FNDRSRUN version 115.154 to fix
    this issue.
    or check Note:335661.1
    1. Please download and review the readme and pre-requisites for Patch.4595778
    2. Please apply Patch.4595778 in a test environment.
    3. Please confirm the following file versions:
    FNDRSRUN.fmb 115.154
    4. Please retest the issue.
    5. If the issue is resolved, please migrate the solution as appropriate to other environments.
    fadi hasweh
    http://oracle-magic.blogspot.com/
    Oracle is not Magic, it just takes years of experience

  • ORACLE FORMS - FRM-40815

    During the dismissal of an LOV, I am getting a FRM-40815 ("GLOBAL.LLLXXX does not exist.")
    Apparently it is a Designer bug fix # 3413168 - "when bound item names <> column", and the form in question was indeed built in Designer.
    I have rebuilt the LOV, removed all calls to global variables, deleted all triggers that fire on the LOV field; none of this has been successful.
    We are in the middle of 8i to 10g conversion, and it is important to note that our 6i form runs fine on 8i AS in Windows environment, but throws the FRM-40815 error on 10g AS in UNIX environment. Unfortunately, we do not have a 10g AS test environment on a Windows platform, so I can't rule out the Windows to UNIX conversion as the potential problem.
    Thanks for any help.

    Hi,
    Dear one other thing to check is if u have assinged the value of global var to a field in forms then check the copy value from item property,some times u will find that variable their.
    tell me if it works
    Muazzam

  • Comment ça marche un registre à décalage qui remplace une variable globale

    Bonjour,
    L'utilisation des variables Globales n'est pas conseillée.
    Pour les éviter, il existe une méthode qui consiste à utiliser une boucle While composée d'un registre à décalage non initialiser.
    J'aurais besoin de comprendre comment LabView gère les registres à décalage. Lorsqu'on modifie la valeur du registre (pour remplacer la fonction écriture vers globale), comment et où LabView stocke-il l'information ?
    Merci pour vos nombreuses réponses.
    AKIRA.

    Bonjour,
    Lorsque l'on utilise un registre à décalage, la variable est stockée dans la RAM mais il n'est pas possible de savoir où exactement car cela permettrait de la changer, ce qui n'est pas le but d'un registre à décalage car il sert à protéger les valeurs stockées.
    Cordialement
    David S.| Certified LabVIEW Associate Developer
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Journées Techniques LabVIEW 2012 : du 27 septembre au 22 novembre
    2 sessions en parallèle : Débuter a...

  • Variable globale

    bonjour,
    je voudrai sauvegarder une variable globale pendant l'excution de Labview.
    est ce qu'il existe un exemple montrant ce que je veux faire
    merci

    Il y a un endroit dans votre vi principal où cette variable globale est écrite. A cet endroit, placez une fonction "écrire dans un fichier tableur".
    Utilisez l'entrée "données 1D", en intercalant une fonction "construire un tableau", prise dans la sous-palette Tableaux. N'oubliez pas de câbler l'entrée "ajouter au fichier" avec un booléen True.
    Au démarrage du vi, réalisez l'opération inverse : lire le fichier (sortie de données 1D), indexer le tableau pour récupérer le dernier élément (utiliser la fonction Dimension et enlever 1), mais SURTOUT, faites en sorte que l'écriture de la globale se fasse avant  toute autre opération.
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • Error in Starting the service.The Service Schedule doesnot Exist.

    when i install the Oracle 8i on Windows 2003 then
    it installed successfully and import and export data successfully wothout any Problem
    But after that when i restart the Server then
    it ask for the User name and Password BUT when i entered the User Name and Password it show's that Error
    "Error in Starting the service.
    The Service Schedule doesnot Exist."
    so please can you solve the problem ?
    My mail id is [email protected]
    Thanking you
    Vikas garg

    Hi
    i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
    and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
    Thanks to all the viewers.

  • How can you globally keep the existing origin points in CS4 files.

    Is thre a way to globally keep the existing origin points in CS4 files.
    I understand that there are now Global Rulers and Artboard Rulers in Illustrator CS5 -
    ...but ALL the origin points in our current Illustrator documents (saved in CS4) that we use as templates for new work (last count, over 300!) and in all archived completed work have all moved to the top left of the page. All these documents were saved with different origin points to define non printing objects on the page such as our custom slug line and colour bars. Do we have to open and re-save each document with a new Global origin.

    I am in a similar situation, but with thousands of Illustrator files with 0,0 origins placed at the bottom left of objects. Now when I open a legacy document and change to global rulers, the Y axis above 0 are now negative values, they were positive in CS4 and earlier. My X values are correct.
    Is there a way to reverse the rulers so I don't have to enter negative values for everything above 0? Or is this a feature request / bug fix that needs a lobby?

  • Variables and Structure in Existing query

    Hi,
    Where can i see the Variables and Structure in Existing query.
    Thanks
    Priyanka

    Open the Query from Query designer.
    Click on 'Query properties' in tool bar.
    You can see the variables under 'sequence of variables' window.There you can change the Sequence of variables also.
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a569ae09411d2acb90000e829fbfe/content.htm

  • How to make a variable global to use in all of my cfm page?

    I have a problem with the variables.
    i need to use a variable  " loginrecord" in all of my cfm pages, its created in my login.cfm and the value of this needed in other page and maybe i need to change it .
    in ASP simply we can use SESSION to make a variable global , is there any way in coldfusion ?
    also in ASP we have a command SESSION.SESSIONID ,  so return the unique number from browser and we can se it as a security check for each one of people login to our site and each one is seperate random and unique number , is there any similar in coldfusion ?
    Thanks
    Alireza

    Thanks,
    the reason at the moment i stock with this command is i need to have login information available in all the pages to check the security. the good point i had in ASP is SESSION.SESSIONID   , it make a unique number base on browser and i can check it if user loged in or no , or if loged in is the same user or other user . i couldnt find same command in coldfusion , and now i use <cflogin> but if i can find the way to have a browser session it help me in other part of my program.
    i start coldfusion new ( near a month ) i have some book and Lynda DVDs, also online sources , and in this priod i re developed one of my program from ASP to coldfusion and its work. i am happy of this and help me to develop better and faster . in compare the coldfusion developed one realy is 40% original development in size and 50% faster . i have good background of ASP in last 8 years include MCSD and developed many program for a small and big companies. but i wanna to continue with coldfusion because i found it more helpfull than ASP specialy in FLASH development .
    BTW thanks for your help

  • Counting rule doesnot exist.

    Hello,
    When I try to enter time I'm getting thefollowing error after I press enter "counting rule 08/2/00/.. doesnot exist".
    In Data Entry Area I'm entering the details for Activity type, Rec. order, Attendance/Absence Type and the hours for the week i.e. Monday, Tue etc..
    Can anyone help me where I'm missing with the Configuration. This is an urgent issue please help.
    Thanks & Regards,
    Padmaja.

    Hi Raghu,
    The employee who is getting error has ESG 1, and he is bookong time for Attendance type, i m not getting where to maintain the counting rule for attendance type. as under the counting rule for attendance it is already maintain.
    Thanks in advance,
    Padmaja

  • Package doesnot exists????

    Hi all,
    My Jdev version is 11.1.2.3.0.
    The application was working very fine. later i created AppModuleImpl.java and added one method to AppModuleImpl.java.
    After adding one method in AppModuleImpl.java getting error after running page package doesnot exist and showing the below imports:
    import oracle.adf.model.BindingContext;
    import oracle.binding.BindingContainer;
    import oracle.binding.OperationBinding;
    import oracle.jbo.JboException;
    import oracle.jbo.server.ApplicationModuleImpl;
    import oracle.jbo.server.ViewObjectImpl;
    And in AppModuleImpl.java if i type import oracle. then its showing only * i.e. import oracle.* only exists.
    what should i do to import all the above imports???
    Any suggestions will be really useful.
    Thank you.

    Hi Frank,
    Thanks for ur quick respose.
    ADF Model Runtime library is already added to both Model and ViewController projects.
    what else i am missing here?
    Thanks.

  • Y5 doesnot exist

    hi,
    Invoices were booked with Y5 10% in SD module correctly. Now at time of payment to tax collectorate for output taxes in MIRO,system displaying message tax code Y5 doesnot exist despite i can see the tax code in MIRO. I am unable to understand the cause of error, please guide.

    Dear:
               Instead of deactivating %age in FTXP for Y5 you should tell your SD consultant to make the condition record inactive as maintained in VK13 or restrict its validity period. Ideally you should never delete FTXP Y5 %age , because in case of invoice reversal in subsequent periods system may get confused if ti does not find the tax code maintenance in FTXP.
    Regards

  • EBS12, Form 10G customized form. Error FRM-40832: Variable Forms_userExits

    EBS 12.
    Forms 10 G
    can i run customized form on my local PC. i have customizied a form which compile successfuly but when i run the form following error come.
    FRM-40832: Variable FORMS-USEREXITS not

    I understand. That’s you why have been requested to upload the form to the server and run it. If you had any issues in compiling the form, I would not ask you to upload the form. Instead, I would suggest you fix it on your client first.
    In brief ..
    You cannot run the form on the local machine, and you have to upload it to the server to do so.
    You should not upload the form to the server unless it compiles successfully on your client.

Maybe you are looking for