From 2G network to 3G

Let me start with this saying.. yes am a girl and I have no clue of how my new blackberry curve works.. so bad at all this!
But once thing I now is that my bb curve 8520 is a 2G phone... is there anyway to update its software so I can get 3G n... its just there's only ONE mobilecompany here in Denmark that will allow private people to get a blackberry with their network... BUT they only support 3G phones... arghhhhhhhhhh!!!!
Really BAD times for me!!
So is there anywhere I can update the mobile.. or is it just totally out of the question... and I need to sell and buy myself a new one again???
Thx for all your help!!

Hi and Welcome to the Forums!
See the specs page:
http://na.blackberry.com/eng/devices/blackberrycurve8500/curve_specifications.jsp
It is my opinion that your model BB does not have the necessary hardware (radio) to support 3G...and, therefore, no software can overcome a hardware limitation.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How can i do a RMAN backup of my database from the network ?

i'm using oracle 8i.1.7.3 with win server 2003
i want to know how can i do a RMAN backup of my database (sever machine A) from the network.
i'd like to save the backup in another machine (the same LAN, the same OS ).
to do that i've mapped a logical device in my comptur (z):
when i run rman command i got this error:
channel ORA_DISK_1: starting piece 1 at .......
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command ON ORA_DISK_1 channel at .......
00
ORA-19504: failed TO CREATE file "\\remote\save\"
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 123) The filename, directory name, or volume label syntax is inco
rrect.

Hi,
ORA-19504: failed TO CREATE file "\\remote\save\"make sure you have created this directory and change it's ownership (chown command)to oracle.
also make sure that oracle user has permission to write to this direcotry (chmod command)
hope this helps
cheers, walrus

Error Message When Importing Bookmarks From A Network Share

An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
To replicate:
The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
If I copy bookmarks.html local to the kubuntu machine, it imports without error.
On windows, I can import bookmarks.html from the network share without error.
Does anyone know why I can't import across the network on the kubuntu version?
browser being run on windows 7:
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
browser being run on kubuntu 10.04:
Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
error message/window titled: remote files not accepted. The message states: You can only select local files.
So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

Accessing Storage from another network - NAS?

Ok. Noob question here. My friend and I run a small design business. Luckily, business is good and our client list is growing out of control. We have a lot of big photoshop files, 3D models, etc. for hundreds of clients. Since most of the people who work for us work remotely (like in other states even) dropbox has been a huge help for collaborating and sharing files. But now, we are out of space.
Down to the point. We are looking for a way to access external hard drive space from any network. I don't know anything about NAS, but we do have an old G4 tower that we could utilize. I've looked into a product called pogoplug biz and that seems good except that you have to go through the web service to get files remotely. We'd like to be able to access those drives via finder when on a different network.
heres a breakdown of what we need.
Remote access (different networks)
multiple users
secure access (password, login)
2TB + storage
secure backup
If anyone has any advice - even if its just pointing me to an article of how to get started it would be greatly appreciated. Thanks!

What type of internet connection do you have?
If it is not business class (ie, dynamic cable modem) look into dynamic dns, and a router that supports it.
You can then set up an FTP share on your G4. System Preferences >Sharing>File Sharing>options
You should then setup the G4 with a static IP locally, and have the router forward FTP requests to it via port trigger/port forwarding. Using a non-standard port is advisable for FTP.
You should then be able to access the share using ⌘-K, type in ftp://yourshares_ipaddress:portnumber and it should mount as a disk.
Good luck!

I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail.

I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail. I can delete other files but several XLS files are giving me this message.

You said it was a network drive. So is someone else on the network using that same file or may have have left with excel still accessing it on their system?

Constant Disconnection from Cellular Network

Hi There, so I've gotten my iPhone 5 32GB since July 2013 and I honestly adore the phone however, there is a problem i'm facing with it quite recently.... the phone keeps disconnecting from the cellular network carrieer every 10 secs of the day... so...I'll start up the phone it connects with 5 blocks of reception.. then it drops to four...then to 1... then it completely disconnects itself from the network and the Edge sign disappers and then 5 secs after it connects back. I dont use my phone much to talk.. however.. it messes up my data plan, i can't even make a call that is more than 10secs... it drains the battery life and I have to wait every few secs to send a whatsapp mesg/fb etc. . I spoke to my carrier... they used different sims of the same network to see if its the sim card itself being the issue.. but its not.. we even used another network's sim.. but no difference.. What should I do?
Sincerely, Stefan (first time Apple user)

Hey stef4896,
These are all the standard troubleshooting steps for the issue you're encountering:
Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Ensure that your software is up to date:
Check for a Carrier Settings Update. Tap Settings > General > About.
Check for an iOS Software Update. Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still does not, contact your carrierto report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
via: iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Best,
Delgadoh

Disconnection from cellular network

since i've bought my new 3gs this week it keeps disconnecting from the network if i keep it without usage for about some time ..approx 30 min or more....when some one calls me he finds me out of service and when i call some one the call fails and i have to restart the phone to once again get connected to the operator and can make and receive calls normally
i tried everything reset network settings, reset all setting, choose carrier manually, i restored the whole OS from i tunes (3.1.3) but nothing worked the same problem occurs..note that am using it on 2g and closing 3g as i have weak 3g in my area...
am really tired from that issue..please any help that would be great!!

If the issue is consistent and you say youve done all the steps youve listed my best advice would be to return the iphone to your nearest apple store.
http://discussions.apple.com/message.jspa?messageID=11407196#11407196
that thread discusses about the issue you are having so you might check it out if others have posted some useful info there.
good luck

I got my Iphone4 from orange network at uk. Now my contract has finished and I want to use new sim into my Iphone4. How can I do that?

Hi dear,
I have a contract Iphone4 mobile from Orange network in UK. My contract has finished on 24/03/2014. During the contract I broke my Iphone4 which was given by orange company. After I broke my Iphone4, I claimed it to my insurance company to get my new Iphone4 and I got a new one.
I want to use this Iphone4 with my new SIM which is from O2 network in UK. Also, I want to use this Iphone at my country(Bangladesh). I tried to use it with my new sim but my Iphone4 does not support it. Please help me out to solve this problems

YOu would need to contact Orange and have them unlock your phone.
ONly the carrier that the phone is locked to is authorized to unlock it.

Weird: Backup file works fine from the network but not when moved into sandbox environment

We have a valid full backup of a database. We know it is valid, we have restored it twice from the network with no problems, but we do not have access to the network location from our sandbox environment.
The .bak file is sizable at about 9GB. The .bak file resides on our internal network, in a SAN drive. No problems there. When we copy the file from there into a sandbox environment to attempt the restore in the sandbox environment it gets corrupted. We've
tried three different times and all three different times it gets corrupted. First time we copied the file over to the sandbox the restore went up to 50% and failed. The second time we copied the file again and attempted the restore again it failed at 70%.
The third time it failed at 60%. The error message we get during the restore is "...Read on ... failed: 13(The data is invalid) Msg 3013, Level 16, State 1, Line 1 Restore database is terminating abnormally."
Now some background here. To move the file our network team is doing this: they have this .vmdk file that they mount out in our production environment (which has access to the network location where the .bak file is), copy the file into the drive, then move
the .vmdk file into the sandbox environment(which does not have access to the network location), mount the drive in the sandbox environment, and then I have access to the .bak file from within the sandbox environment.
Something in the process of using the .vmdk file to move the .bak file from production into the sandbox is causing the file to get corrupted.
Any thoughts? Has anyone seen this before? Any idea? TIA,
Raphael
rferreira

Original server that generated the .bak file:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64)
Jun 11 2012 16:41:53
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server where I CAN restore the .bak file from the network location (not inside the sandbox):
Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server inside the sandbox where I get the error when attempting to restore the backup:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64) Jun 11 2012 16:41:53 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
rferreira

How do I remove an unwanted Airport Express from my network?

I have been using a Time Capsule for several years. I am having trouble backing up to my Time Capsule. I have discovered an unknown Airport Express in my network. I've changed networks, added passwords to the network, etc. How do I remove this unwanted Airport Express from my network? I think he is wreaking havoc with my system!! Help...

Maybe this is an issue I should consult my ISP about??
No question about that. If you can "see" Travis's device, then he can likely "see" your Time Capsule.
I'm just concerned that whomever the APExpress belongs to could be changing settings on my computer or Time Capsule that would cause the issues with me not being able to backup.
Make sure that you have a Time Capsule base station password. Unless a user has that password, they might be able to "see" your Time Capsule, but they cannot access any of the data on the Time Capsule or change the settings.
Open AirPort Utility, click on the Time Capsule and click Manual Setup
Then, click the Time Capsule tab below the icons to see the device name and password for your device. Make sure that you have entered the password and confirmed. Click Update if you have made any changes.
The message I get is "The backup was not performed because an error occurred while copying files to the backup disk. The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
I am not sure what this error means, because I cannot duplicate it here to test.
If it were me, I would try this "fix".
http://pondini.org/TM/A5b.html

Acrobat 11 pro (Creative Cloud master collection licence) doesn't save files changes only from the network and a user profile. We can't recreate the user profile due other programs setting

Steps to reproduce bug:
1. edit .pdf file from MS network (i.e a share).
1.1 Browsing the network.
1.2 Once that the file is found.
1.3 Select the file, right click and select edit with Adobe Acrobat".
2. save changes.
Results:
I get message box "document could not save because write access was not granted. only read"
Expected results: I have to save the file because the user has all rights file’s security.
Can you help me ?
Thanks in advance
Enrico

First, you should ask in Acrobat
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Second, different program, but what helps with SOME permission errors is in the link below
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)

Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!

Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Office files slow when opening from a Network Share

Hi!
So, we have a client who moved from having regular Office installations to Office 365 for Mid Size business and reinstalled the Office that comes along with Office 365. Ever since we did
that, there is a delay in opening any office files from a network share. Opening up a Word or Excel document takes up a lot longer than it did before. We have another client with the exact same issue who have Office 2013, so I think its mostly something to
do with office 2013. This problem has been going on for a month, and I have tried everything I can. I have gone through most posts on technet and the internets. Tried disabling AV, Office File Validation, added the network share to trusted locations, removed
add-ins. Nothing works! All other files opens up quickly, pdf, jpg. We can open larger jpg or pdf files faster than smaller office documents. This is a significant problem with our clients as they work in recruitment and open up resumes all day from the network
share and it takes forever to open.
Any advice or help is appreciated!
Thanks!
Shaneez

Hello,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Hi there can help me to unlock the my iphone from telstra networks

hi there,
i've asked Telstar for unlock my new iphone from their network because i'm going overseas, they told me it's was done and i have to wait for 72 hours, after that connect my iphone to itunes and restored.
i have done everything but still have problem with my new overseas sim car,
can you help because i need my phone

No one here can help you.
You need to talk to Telstar.

Can't print from a network computer to my HP Deskjet D2680 on a Windows 7 computer

I have an HP Photosmart 2610 all-in-one printer connected to my HP desktop computer via a USB cable. The computer is running Windows 7 Home Premium (64 bit). I downloaded the current software and drivers from Hp (364 MB). I can print to this printer from any other computer on my home network.   So far, so good.
Now the problem. I also have an HP Deskjet D2680 printer connected to the same HP desktop computer above via a USB cable. I downloaded the current software and drivers from Hp (101 MB i think).   I can print to the D2680 from the HP computer, but I cannot print to the computer from any computer on the network. The print request does not generate an error. Nothing happens. No print job shows up in the print queue on the HP desktop computer.
When I add the D2680 as a network printer on any of my other computers, the D2680 printer is seen. The Add Printer function knows that the printer it is a D2680 printer and sets up the correct printer driver. Everything appears fine, but I just can't print to it from any network computer.
I then tried to add the D2680 as a local port... no luck. I identify it as \\ computer-name \ share-name, where computer-name is the name of the HP computer, and share-name is the name assigned to the D2680 when I shared the printer. On the HP computer, user passwords are turned off and all sharing options are turned on. I also modified the D2680 security to allow full access from NETWORK.   When I ty to create the local port... Access Denied.
Does the D2680 support network printing? If not, why? If not, someone from HP should be demoted to the mail room for that decision. If so, it is not working. So what do I do? Take a sledge hammer to it, then go buy another printer?
So much for plug and play.   It's more like plug and cry.
Thanks in advance for your suppprt.
David

I found a thread about the HP Print & Scan Doctor software tool. I downloaded and ran it. It detected a conflict with the D2680 driver / software, so I uninstalled the driver / software. I then reran the software install, and now everything works fine.

From 2G network to 3G

Similar Messages

Maybe you are looking for