From AS/400 to SAP
Dear all,
I've got to integrate on a daily basis a file which is intially generated by an AS/400 system into SAP 5.0.
Incoming data format RDB*?
Data types are FI
Volume not so big
Frequency daily
Would the batch input be the best way to do so?
Regards.
Hi Guru,
Thanks for the quick reply.
Yes. I intend to pull data into SAP. Those data are already generated thanks to a RPG program. The next step is to integrate them into SAP. I'd like to do so without modifying the RPG program nor initial data format (in output of AS/400). In fact I was wondering if in standard SAP 5.0 does not include any tools to allow inbound data transfer with AS/400 based system.
Regarding the Idocs vs Batch input. I understand that Idocs is much more scalable and powerfull. However in terms of realization, which one would be heavier. Because in middle term this data flow should disappear.
Regards.
Similar Messages
-
BO DI for extracting data from legacy system to SAP BW 7.0
Hi,
Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
Please share your experience on such a landscpae or related documents any of you had come across.
Regards,
PriteshThere are couple of them - Lawson ERP, Kalido, AS/400. ECC 5.0 might be there as well.
Regards,
Pritesh.
Edited by: pritesh prakash on Jun 14, 2010 2:00 PM -
Error message is 'The Request Error : 400' with SAP Download Manager
Hello,
The authorization object SWDOWNLOAD (download software) is assigned to the My user ID.
But I could not download below that file.
SAP_ABA 710 (4~8)
SAP_BASIS 710 (4~8)
PI_BASIS 2006_1_710 (4~8)
SAP_BW 710 (4~8)
Error message is 'The Request Error : 400' with SAP Download Manager
I logged on to SAP Service Marketplace, software download area /swdc.
I have created objects in the download basket and have received approvals (->Maintenance-Optimizer) where required.
I start the SAP Download Manager and the objects from the download basket are visible in the object list of the program window.
After I choose "Objects for Download", the system starts the download.
In the info-line (in the lower part of the window), the system displays the message 'Processing object...' and then 'The request failed: 400'.Hello,
In these cases the following things should be checked:
1.- Please be sure that you are using the latest Donwload Manager version
2.- S-User and password should be active
3.- Specify the proxy. Please refer to SAP Note 155954
4.- It might be that you are not licensed for the product you want to download.
If the checkings above are correct and the problem is still alive, I would recommend you to open an SAP customer message under component XX-SER-SAPSMP-SDM providing the following information:
1.- The exactly software product name and package or stack number you try to download.
2.- Attach to the message the results of the trace file generated as per note 574885:
574885 - Download Manager: Generate trace file for analysis
I hope this helps you.
Regards,
Blanca -
Chnaging logical file path - Migrated from As/400 to wintel
Hi,
How do i change the default file path of logical file .
I need to change path of a logical file in MI34 tcode from C:\usr\sap\DEV\SYS\global to out new Virtually created directory.
Recetly We moved from OS/400 to WINTEL environment
I wenin to FILE transaction but still it it looking at
C:\usr\sap\DEV\SYS\global??? How do i over write it?
Regards
PrasadHi Vara,
to change the default logical file path , you need to change in Program. since this is standard program, you need to copy into 'Z' program and change. This is one option.
Better to do is, change the physical path of the Logical file path in FILE transaction. may be this will work.
All the Best. -
Pls Help me with steps to add data from xml file to SAP B1 through B1iSN.
Pls Help me with steps to add data from xml file to SAP B1 through B1iSN. I am getting stuck in xsl transformation. not able to understand where the mapping code needs to be added.
Pls explain me the steps for adding data from xml to B1 quotation step by step.
thanks and regards
PriyaHi,
Have you checked this: https://sap.na.pgiconnect.com/p45508295/?launcher=false&fcsContent=true&pbMode=normal ?
Thanks,
Gordon -
SSO from Microsoft ISA to SAP enterprise Portal
Hi Gurus,
Our vendors access the Internal network using MS-ISA as proxy.The first point of authentication is MS-ISA where the Vendor needs to give his User id and Password.After that he hits the Internal Portal and is prompted for a Login again.Is there a way to set up SSO from MS-ISA to SAP EP7.0 so that there is no need for second Logon.
Thanks in Advance!The easiest, and common way to solve this, l but not the only way is to use ISA as a proxy and use the fact that the ID of the authenticated user can be stored in an http header variable (e.g. REMOTE_USER). This HTTP header variable can then be used by the back-end SAP system (internal portal) to authenticate the user and issue an SSO2 ticket so that the authentication only needs to occur first time they access a page on the SAP system.
The use of HTTP Header variables in SAP J2ee engine is widely documented on SDN and in SAP help library.
Thanks,
Tim -
Copy file from FTP server to sap application server
Hi,
I am able to copy a particular file from FTP server to sap application server using FTP_CONNECT, FTP_COMMAND and FTP_DISCONNECT. But here my problem is, it copies into default application server path(DIR_HIOME). I want to copy into specified folder in the application server. How can I specify the required destination path.
Can you please suggest how to achieve this.
Thanks,
Shiva Kankanalatry something like this:
data: user(30) type c value 'ftpuser', "ftp username
pwd(30) type c value 'ftppass', "ftp password
host(64) type c value '255.255.255.255', "ftp server IP
cmd1(80) type c value 'lcd /dump', "location on app server where you want to copy the file
cmd2(80) type c value 'get', "specifies you are going to get the file from ftp server
dest like rfcdes-rfcdest value 'SAPFTPA',
file(15) type c value 'file.txt'. "specifies file that you want to get from ftp server
data: hdl type i,
key type i value 26101957,
slen type i.
slen = strlen( pwd ).
call function 'HTTP_SCRAMBLE'
EXPORTING
source = pwd
sourcelen = slen
key = key
IMPORTING
destination = pwd.
call function 'FTP_CONNECT'
EXPORTING
user = user
password = pwd
host = host
rfc_destination = dest
IMPORTING
handle = hdl.
call function 'FTP_COMMAND'
EXPORTING
handle = hdl
command = cmd1
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
loop at result.
write at / result-line.
endloop.
CONCATENATE cmd2 file INTO cmd2 SEPARATED BY SPACE.
call function 'FTP_COMMAND'
EXPORTING
handle = hdl
command = cmd2
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
loop at result.
write at / result-line.
endloop.
refresh result. -
unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest
Hi,
For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
BR,
Mangesh -
Fetching of multiple files from Application Server into SAP Program
Hi All,
I have a issue related <b>Fetching of multiple files from Application Server into SAP Program</b>.
Actual issue is as below.
In the <b>selection screen</b> of <b>my program</b> i will give <b>Application Server Path</b> as :
<b>/PW/DATA/SAP/D1S/PP/DOWN/eppi0720*</b>
Then the based on above input it should pick up all the files that are matching <b>eppi0720*</b> criteria.
Suppose if i am having <b>5</b> files with above scenario, i have to fetch all those <b>5</b> files at a time and place in my SAP Program.
All those 5 file's data should come into SAP at a time.
Can anybody tell me how can we solve above issue.
If any body has come across same issue please provide me with solution.
Thanks in advance.
Thanks & Regards,
Rayeez.If you want to get around the authorization check, you can do something like this.
report zrich_0001 .
parameters: p_path type epsf-epsdirnam
default '/usr/sap/TST/SYS/global'.
parameters: p_file type epsf-epsfilnam default 'CO*'.
start-of-selection.
perform get_file_list.
* FORM get_file_list *
form get_file_list.
types: name_of_dir(1024) type c,
name_of_file(260) type c,
name_of_path(1285) type c.
data: begin of file_list occurs 100,
dirname type name_of_dir, " name of directory. (possibly
" truncated.)
name type name_of_file, " name of entry. (possibly
" truncated.)
type(10) type c, " type of entry.
len(8) type p, " length in bytes.
owner(8) type c, " owner of the entry.
mtime(6) type p, " last modification date, seconds since 1970
mode(9) type c, " like "rwx-r-x--x": protection mode.
useable(1) type c,
subrc(4) type c,
errno(3) type c,
errmsg(40) type c,
mod_date type d,
mod_time(8) type c, " hh:mm:ss
seen(1) type c,
changed(1) type c,
end of file_list.
data: begin of file,
dirname type name_of_dir, " name of directory. (possibly
" truncated.)
name type name_of_file, " name of entry. (possibly
" truncated.)
type(10) type c, " type of entry.
len(8) type p, " length in bytes.
owner(8) type c, " owner of the entry.
mtime(6) type p, " last modification date, seconds since 1970
mode(9) type c, " like "rwx-r-x--x": protection mode.
useable(1) type c,
subrc(4) type c,
errno(3) type c,
errmsg(40) type c,
mod_date type d,
mod_time(8) type c, " hh:mm:ss
seen(1) type c,
changed(1) type c,
end of file.
call 'C_DIR_READ_FINISH' " just to be sure
id 'ERRNO' field file_list-errno
id 'ERRMSG' field file_list-errmsg.
call 'C_DIR_READ_START' id 'DIR' field p_path
id 'FILE' field p_file
id 'ERRNO' field file-errno
id 'ERRMSG' field file-errmsg.
if sy-subrc <> 0.
sy-subrc = 4.
exit.
endif.
* Read the file list and add to internal table.
do.
clear file.
call 'C_DIR_READ_NEXT'
id 'TYPE' field file-type
id 'NAME' field file-name
id 'LEN' field file-len
id 'OWNER' field file-owner
id 'MTIME' field file-mtime
id 'MODE' field file-mode
id 'ERRNO' field file-errno
id 'ERRMSG' field file-errmsg.
if sy-subrc = 1.
exit.
endif.
append file to file_list.
enddo.
* Write out the file list
loop at file_list.
write:/ file_list-name.
endloop.
endform.
Regards,
Rich Heilman -
How to UNLOCK queues when data is migrated from legacy system to SAP syste
Hi All,
I need some help regarding queues (SMQ2). XI is been used to migrate data from legacy system to SAP system. Sometimes the queue is getting locked. Once the queue is unlocked then the message is processed correctly. So, the incoming queues must be "unlocked" routinely so that they can process through the system. There is a standard report RSQIWKEX available that can be scheduled in SAP system to automatically unlock the queues. Before using the standard report RSDIWKEX, we made sure that we have added parameter MONITOR QRFC_RESTART_ALLOWED set to "1" in Integration Engine specific configuration (TCODE SXMB_ADM).We are unable to analyze the reason for locking of queues and how to avoid it. If the locking of the queues can not be avoided, is there any way to unlock the queues? We tried executing this report but were not successful in unlocking the queues. Please guide us in solving this issue. It would be really helpful if you can give us a direction in solving this problem.
Thanks in Advance,
Shwetha.Hi,
Just check if the Queues are registered in Transaction SMQR.
If its not, then register the Queue by pressing 'Register' Button
Sharif. -
Transfer of GL a/cs manually from legacy system to SAP
How do you transfer GL a/cs manually from Legacy system to SAP, what offset a/c would you use. Also how would you open AR and AP transactions manually in SAP. Please help my email id is [email protected]
ThanksHi,
U can open one opening balance account.
Separate u r trial balance in following
gl account use key 40/5O GIVE NET EFECT TO OP BAL ACCT
Asset- use key 70 -75 GIVE NET EFECT TO OP BAL ACCT
Customer use key 01/11 GIVE NET EFECT TO OP BAL ACCT
Vendor use key 21/31 GIVE NET EFECT TO OP BAL ACCT
Material accts - this will be loaded thru mm and bal will go to initail entry acct revert one enrty from that to OP BAL ACCT
now u have uploaded all tb hence u r opening balance should be nil.
Warm Regards -
This is regarding interface from legacy system to SAP
Hi All,
We have trasferred the one file from legacy system to SAP, and it was created a session in SM35, it contains 1000 errors.
we don't want correct those errors and these entries should be delated, could you please let me know are these errors can I see in any error table in SAP, is this facility is availbe in SAP or not?
becuase it isl very difficult to go and delete the entries one by one in sm35
Regards
NamaHi,
1) No updates will have been done for the items with errors.
2) Mark the Batch, then press F2 to call up the analysis. You can check here for the cause.
3) If you are not going to correct the items or the cause so as to post them, just delete the batch.
Kind regards -
Data migration from legacy system to SAP
hi all,
could you please post some docs on migration from legacy system to SAP system., also the problems faced while migration and best practices in data migration
regards
sridharanHi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha -
Upload data from legacy system to SAP through ALE IDOC
Hello All,
I have a requirement where i need to upload the data from legacy system to SAP. So i am using ALE IDOC.
In my requirement i need to extend the Standard IDOC. I have extended the IDOC and even found the exit for the updation of the extended fields to SAP. My data would be be placed in the application server.
Can anybody tell me how to retrieve the data and update in the tables for the extended fields.
Could you please provide a sample program for retrieving data for IDOC.
ThanksHi,
You can find the sample code in the following link.
Re: calling idoc_input_creditor
Regards
Sajid -
How to upload schedule line from flat files to sap file
dear all,
i want to upload the schedule lines from flat files to sap schedulle lines
but the flat files have 15 schedule lines and the data is as per date
so how to upload that and the fields available in flat files are more than the sap screen
we are having more than 6 items
and 15scedule lines its abt 90data to be upload
for one customer in every 15 day
so how to do this
is there any direct use in functional side
with out the help of any abap
but my user will do it
so he need a permanent solution
with regards
subratHi Subrat ,
u can upload the data either ( Master /Transaction) data with the help of lsmw. for that all u need to do is go through the lsmw and do it. in that u can go Batch input recording/ BAPI/ IDOC any of that. here i am sending the LSMW Notes go through it and do the work.
once u create the LSMW project then u can ask the data from user or u can explain the user about the program and can run the flat file to upload the data.
if u require LSMW material Just send me blank mail from u. my mail id is [email protected]
Reward if Helpful.
Regards,
Praveen Kumar.D
Maybe you are looking for
-
Script injection on .cfm pages
I need help. For the second time in three months every single .cfm page has a malicous cross-site script appended to the orginal code. It looks something like this: I'm having a really hard time trying to figure out where this might be coming from, o
-
VA01 Short dump SAPSQL_INVALID_TABLENAME
hi experts, Hope you could help me with this problem, it appears as if table a830 wouldn't exist but I checked it using Se11 and it does exist, what else could be causing this problem? An exception occurred that is explained in detail below.
-
Creating instances of a movie clip using Actionscript
I have a script that pulls a specified amount of Movie clips from the library to the stage, and that part of my script works. I want to add a button that will stop the movie clips but the Movie clips do not have instance names since they were pulled
-
How to transfer iphoto pics to folder on desktop?
iphoto not allowing me (all of a sudden) to transfer photos from iphoto to a folder on desktop. Has a little "no no" sign ... How can I rectify this? please answer to email: *********@****.com thanks. <Edited by Moderator>
-
Hi: What is this information?, The information in alert_log is: kccrsz: expanded controlfile section 11 from 867 to 881 records requested to grow by 8 record(s); added 1 block(s) of records (1)who tell me what's causing this issue, and give me a solu