From user option in import utility

hi,
i am using oracle 10g(10.2.0.4.0) and i have exported two tables from different schema and created a dump file. Now i am trying to import those two tables into the same schema in single import command. Is that possible???? can i give both the username in the "fromuser" option in the import command???
thanks in advance
Edited by: 793097 on Nov 19, 2010 3:01 AM

793097 wrote:
hi,
i am using oracle 10g(10.2.0.4.0) and i have exported two tables from different schema and created a dump file. Now i am trying to import those two tables into the same schema in single import command. Is that possible???? can i give both the username in the "fromuser" option in the import command???
thanks in advance
Edited by: 793097 on Nov 19, 2010 3:01 AMhttp://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1019624

Similar Messages

Same user for export import utility

oracle database 10g
OS windows 2000 server
for import Is it necessary to create user with same name as of export file?

No need to create a user. but while importing you have to import as system with from user and touser clause specifying from where we export and where we are going to import
eg:
imp system/manager file=xyz.dmp fromuser=scott touser=matt

Cannot boot. volume disappeared from boot option after Disk Utility (GUI) repair

I have a 13-inch MBP with the latest OS X version.
Problem
Yesterday, I went to the Recovery Mode and performed Repair on my boot volume. I was not having a problem, but I just wanted to verify and repair as a regular maintenance. The Disk Utility said some kind of error (I cannot remember, but something about EFI?), and I cannot start my computer since then (question mark folder icon when I try to boot).
I have tried the following
I tried to recover the drive by going into the Recovery Mode, but when I press Option key for boot options, I just have an empty grey screen have no option(not even the recovery volume). I have also tried to enter into the Single User Mode, but it goes straight back to the question mark folder icon. Just in case, I performed PRAM and SMC reset, but still no dice.
Next, I tried to boot with Command+R pressed, and the computer went into Internet Recovery Mode, which works fine. Then, I went to the Disk Utility, and my SSD is on the list with the volume that has OS X(only volume on the entire disk except recovery volume, etc). I use FileVault2, and I can unlock the volume and mount it without any problem. When I do Verify Disk, it says that the volume appears to be OK. Also, performed fsck using Recovery Mode's Terminal, and it still says that "The volume Macintosh HD appears to be OK," the exact same message that I got from GUI disk utility. I also tried to unlock and set the volume as a start-up disk, but I still get the question mark folder icon.
If you need further details, please let me know! Please save me!

Hello jukim,
Thanks for using Apple Support Communities.
Great troubleshooting done so far. Since you're still booting to the flashing question mark, even after repairing the disk, the next step would be to reinstall OS X.
A flashing question mark or globe appears when you start your Mac
https://support.apple.com/kb/TS1440
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Take care,
Alex H.

Using the Import utility from other users and going to a different schema

I has a user today with rights
Insert into XXXX.TABLE values(); Works just fine for another schema's table which has select,insert,update,delete.
We tried to utiile the import utility from OTHER USERS
Insert failed ORA-00942
Do you want ot ignore all errors
Even though we have rights to the schema under OTHER USERS.
When connected as the owner it works fine.

I've be trying to find a work-around to this issue & found this old post -- I'm having the same problem.
I'm using Oracle 11g and SD 2.1.1.64.
I have user A with a table that grants select,insert,update, and delete privs to user B. Logging into user B I, of course, can do inserts, deletes, etc. on the the table in user A's schema.
When I use the import data feature to load data from a CSV file I can't get it to work while logged into user B. It does work fine if logged into user A. It looks like the issue may be that it doesn't put the schema prefix of "A." on the insert statements.
Has anyone found a way to get around this issue yet?

How to export and Import table of another user from user system using expdp

Hi All,
How to export a table 'scott.emp' from system user.
expdp system/password directory=expdp dumpfile=scott_emp.dmp ???? ?? tables=emp ??????????????????????????
thank you
---------------------------------------------------------- Posting solution here to make needed users not to scroll down ------------------------------------------------------
Finally I got it right!!!
Task :- Export table_1 of schema_a from database db1 and Import it to schema_b of database db2 as user other than schema owner
Solution :-
expdp system/pwd directory=expdp tables=schema_a.table_1 dumpfile=schema_a.table_1.dmp logfile=expdp_schema_a.table_1.log
impdp system/pwd directory=expdp tables=schema_a.table_1 dumpfile=schema_a.table_1.dmp logfile=impdp_schema_a.table_1.log remap_schema=schema_a:schema_b remap_tablespace=table_1_tablespace:schema_b_tablespace
Thank You All
Edited by: Ven on Mar 9, 2011 7:52 AM

Just a example
SQL> $expdp system/sys directory=data_pump_dir dumpfile=tests.dmp tables=scott.emp
Export: Release 11.2.0.1.0 - Production on Tue Mar 8 10:39:57 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYSTEM"."SYS_EXPORT_TABLE_01": system/******** directory=data_pump_dir dumpfile=tests.dmp tables=scott.emp
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 64 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "SCOTT"."EMP" 8.570 KB 14 rows
Master table "SYSTEM"."SYS_EXPORT_TABLE_01" successfully loaded/unloaded
Dump file set for SYSTEM.SYS_EXPORT_TABLE_01 is:
C:\APP\MAZAR\ADMIN\ACEME\DPDUMP\TESTS.DMP
Job "SYSTEM"."SYS_EXPORT_TABLE_01" successfully completed at 10:40:01
SQL>

Import from Repository option disabled in offline mode

We need to import usage tracking information from UsageTracking.rpd into our current rpd. For this we shut down BI Services and opened our repository in offline mode. In the Admin Tool when we click on File->Import , the option 'from Repository' is disabled. Any suggestions on why this option is disabled by default in offline mode and how we could enable it.

Hi
By default, the Import from repository option on the File menu is disabled. When this option is enabled, the Deprecated feature warning dialog box appears each time a user begins the import. If the user clicks yes in the dialog box, the import process continues. If the user clicks No, the import process terminates.
To turn on this option Do the following step
tool->option->General And in that the last option is[b] Allow import from repository
Check this box.
Best of Luck
Thanks
Siddhartha P

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve .....

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve this issue. I have tried resetting it but nothing... Either I'm doing something wrong or....

I believe the issue is with the Apple ID that was used to purchase the App. If you download an App that was purchased under a different Appple ID then all updates will also be linked to the original purchaser's Apple ID. Your Apple ID is the the same ID as your iTunes, iCloud, etc. Some folks use different ID for the different Apple sites. No need for that One ID for all Apple Sites, and if someone else buys an App using their ID and they(you) download that App onto your device and that App requires an update it will ask for the purchasers Apple ID. This happens a lot when folks sell their iPad or give it to someone else and leave some purchased(free) Apps on the iOS device. You cannot change the original ID the App was purchased under. A suggestion would be if someone else has an App that you like but do not want to pay for use their ID or in the future have them gift the App to you.

I'm a new Mac user. I imported photos from my PC they ended up in iphoto library on the hard drive, but when I open iphoto from my dock its empty. How do I import those photos to the dock file?

I'm a new Mac user. I imported photos from my PC through a jump drive and they ended up in my iphoto library on the hard drive but when I open iphoto from the dock its empty. How do I import those photos to the dock file from the iphoto library?

Paragon Software has the most reliable NTFS driver for Mac
tips on importing and organizing, transferring from Windows etc
http://www.apple.com/support/itunes
http://www.ilounge.com

How come the switch user option is missing from my lock screen?

I upgrade to Lion my iMac Core 2 Duo and now when I lock the screen the switch user option is missing from the lock screen, you just have to cancel o renter as the original user, so that if another member of my family wants to switch and use the mac he or she cannot do it.
This is what I am talking about (image taken from a lion review): http://dl.dropbox.com/u/134544/forum/Schermata%2007-2455766%20alle%2011.05.12.pn g
The switch user option is totaly absent, I just have the cancel.
It that a bug or what?
Please note this happens only when I lock the screen from the screensaver, i.e. requesting the password to restart from the screensaver, if I get to the login windows all users appears correctly and people can switch back and forth.
Thank you.
– cordialmente,
tiziano solignani, da  Mac
http://ts.solignani.it (splash)
http://goo.gl/p6Sb0 (libri)

I just talked to apple support. They said Lion doesn't support this feature. They gave me a work-around, which was to disable requiring a password in the screen saver. Then enable user switching so it appears in the top right of the banner. Note that since the screen saver no longer locks the screen, in order to actually lock the screen the user must click on the upper right user list and select something like "Login user...".
This issue has left me disappointed with apple for a few reasons. Hopefully someone at apple will take note:
1. Apple removed a useful feature.
2. Apple did not provide a response to this thread which would have been the best forum to inform users of this change. It would have saved me and apple one long phone call.

I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
I would suggest trying a different firewire cable.
You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
Here is a link.
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
Other things to check:
Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

RAR: Risk resolution options , Remove access from user is disabled

Hi All,
In RAR , After risk analysis, if we click on risk description 3 Risk resolution options are there.
Mitigate Risk
Remove access from user
Delimit access for user
In these options mitigate risk only working.I am using GRC SP 5.
How about other two options , save button is disabled.How to enable this?
can we remove/delimit access to user using these options? any body tested these options?
Thanks n Regards,
Joseph

Joseph,
These functionalities do not exist in the tool and these buttons have been in the RAR for past 2 years. SAP wants clients to use CUP for removing or delemiting access so I highly doubt this will ever work.
Alpesh

Import from Repository option not working - OBIEE 11.1.1.6.2

Hello,
We are currently running on OBIEE 11.1.1.6.2. We would like to merge Two Repositories. Well, in addition to "Merge" option we have, we were trying *"Import from Repository"* option but in vain. It is showing the following error:
*[nQsError: 12033] A client tried to connect to a server that is not of the right type*
I understand this option is of low precedence from Oracle and its support. But, just want to know if anyone have used this option and encountered this error. If so, any workaround u wanna suggest. I appreciate any support.
Thanks.

967977 wrote:
Hello,
We are currently running on OBIEE 11.1.1.6.2. We would like to merge Two Repositories. Well, in addition to "Merge" option we have, we were trying *"Import from Repository"* option but in vain. It is showing the following error:
*[nQsError: 12033] A client tried to connect to a server that is not of the right type*
I understand this option is of low precedence from Oracle and its support. But, just want to know if anyone have used this option and encountered this error. If so, any workaround u wanna suggest. I appreciate any support.
Thanks.Do you know if the OBIEE installation is done on a cluster of two servers?

Users are not importing from BW to bobj

Hi Experts,
I am working on bobj 4.0 and bw 7.0 i am facing an issue while importing users from bw .i can import roles but i can not see the users .In Bw the roles have users but when i import them to bobj i can see only roles but not users ?????

Hello,
I know this post is from almost 2 years back.
But we are running into an issue in BOBJ 4.1 SP2 with role and user import.
When we import roles from BW to BOBJ from SAP Authentication. All the roles are imported fine.
The user gets created in BOBJ when the user logs into Portal via Launchpad for the firs time.
Lets say we have 5 roles in BW that the user is part of, and when we import the 5 roles, we do not see the user as a member of the 5 roles in BOBJ. But the user is seen in only one role.
We do not see user in any other 4 roles imported from BW, even though the user is in those roles in BW. This causes a problem as the roles are applied to different folders in BOBJ and User now cant see the objects attached to the 4 roles that the user is part of.
We even tried scheduling a role and alias import from User Update tab in the SAP Authentication in CMC. That did not help either. I thought this should atelast synch up everything between BW and BOBJ.
Any thoughts on this please
Thank you
Suman

I am trying to download my photos from my iphone to my computer, but the computer does not show the device or give me the option to import.

I am trying to download my photos from my iphone to my computer, but the computer does not show the device or give me the option to import.

Have you already confirmed that you trust the computer?
Launch iTunes, then connect your iPhone to the computer.
When prompted, confirm that you trust the computer.

Disable "Import From Enterprise" Option

Hi All,
I am using trial version of Xcelsius Engase Server 2008. There are some issue with this.
1) I want to connect this with Live Office. While In Manage Connection option i am not getting Live Office connectivity.
2) In file Menu "Open From Enterprise" option is disabled.
3) In Data Menu "Import From Enterprise" option is disabled.
To enable the "Any Map Add-on" option I have used this version.
Now can anyone tell me in which trial version, i got all these feature?
Or is there anything that i was missing to enable all options.
Thanks in Advance,
Rishit Kamdar

Rishit,
1) I want to connect this with Live Office. While In Manage Connection option i am not getting Live Office connectivity.
Anil - You need to have BusinessObjects Xcelsius Enterprise installed to work on Query as a Web Service (QaaWS) or LiveOffice...
2) In file Menu "Open From Enterprise" option is disabled.
3) In Data Menu "Import From Enterprise" option is disabled.
Anil - Install BO Enterprise server, and check if it is enabled...
-Anil

From user option in import utility

Similar Messages

Maybe you are looking for