Front page opens works shortly freezes. only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally. The restart saved tabs does not work on that first page.

front page opens works shortly freezes.
only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally.
The restart saved tabs does not work on that first page.

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Similar Messages

  • I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed. The serial # for 13 does not work. Any thoughts on how I can get a number for PSE 12?

    I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
    The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?

    Hi
    There is a newer version of Resolution+ Plug-in released for an Qosmio X series
    [Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
    try it out...
    If it has not been installed properly, try rebooting your computer and reverify.

  • I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

  • [svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

    Revision: 5019
    Author: [email protected]
    Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
    Log Message:
    ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

  • HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

    Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

    Okay, the Wi-Fi doesn't work.  Turn it on.
    Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
    When responding, post in your native language as your English makes very little sense.

  • How do I uninstall the iPhoto update which does not work on maverick?

    How do I uninstall the iphoto update which does not work. ie it tells me my library is locked out and the recommended action by apple does not open the phot library first aid. ? i need to go back to the old iphoto.

    Terence, I was trying a way to message you directly - jumping on a recent thread seemed to be the only way (sorry, DEW45). 
    Terence, you seem to be the foremost expert on apeture and iphoto and have helped me many times in the past (thanks).  I have a question that you may be able to help with (anyone also feel free to take a stab).  I use blogger to upload my photos and host my blog (www.sippingespresso.com).  I spend hours organzing and editing photos - namely, I will enhance and sometimes alter an image in Apeture.  It always saves over the orginal file (at least for viewing purposes), which is fine by me.  But then when I go to upload the photos onto blogger it seems to always pull my dull, original image.  Obviously, I want the newer, bright, enhanced photo.
    I'm one step away from importing them, dragging them out of iphoto and into Photoshop, then editing the files and dragging them back into iphoto, deleting the originals and uploading from there.  There HAS to be a better way - please help!!  I've already posted far too many boring images without the beauty of Apeture's "auto enhance".
    Thanks in advance, Terence or anyone else. 

  • My iPod dispalys this message: "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

    My iPod dispalys this message:
    "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
    I have seen the Apple webpage suggesting the "five R's" (including restore).  Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data. 
    I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data. 
    Thanks in advance!

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

    Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy.  What should I do?
    I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM.  But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install.  It is like an infinite loop!
    Please, someone help!
    Thanks!

    HI gener7!
    I'm sorry but I am not on Creative Cloud.  I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application.  My AAM version is:  8.0.0160
    The link you provided was the update that I wanted to install but it does not work.  A window shows up during that install that says:
    We've encountered the following issues.
    Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem.
    and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
    Thanks!

  • Why does right clinking on link and selecting open in new tab does not work?

    Why does right clinking on link and selecting open in new tab does not work?
    It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Switching browser using IE tab plus - the Norton Identity Safe does not work

    Using Firefox 4.0.1 and Norton 360 5.1.0.29 - which has recently been "fixed" to work together (by Norton).
    When using IE Tab Plus to switch rendering engines (Firefox to IE) the Norton Identity Safe does not work by not pre filling user names and passwords to sites that are registered in the Norton Safe and also for any new sites does not offer the option to add a new site to the Norton safe . . . . . is this a Norton or Firefox or IE Tab issue? And has anyone else had this problem?

    Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
    I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

    I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question. 

    Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
    Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
    ~Lyssa

  • HT2638 since updating iPhoto it has ceased to open.  i have tried to Hold down the Command and Option keys on the keyboard but it does not work.  iPhoto still does not open

    Since updating iPhoto it has ceased to open.  I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library,  but it does not work.  iPhoto still does not open.  can someone please help?
    thank you

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
        Home/Library/ Preferences folder.
    2 - delete iPhoto's cache folder(s):
    Home/Library/Containers/com.apple.iPhoto
    and, if there is one, the
    Home/Library/Caches/com.apple.iPhoto folder
    3 - reboot, launch iPhoto and try again.
    NOTE: For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
    Happy Holidays

  • I never set a passcode for my iPad but it is locked and I can't get it unlocked.  The "slide to unlock" does not work.  How do I get it unlocked?

    I never set up a passcode for my iPad 2 but it is locked and I can't unlock it.  The "slide to unlock" does not work.  Any suggestions on how to unlock it?

    You have to slide to unlock to bring up the keyboard if a passcode is set. If you can't slide then try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

    When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

    The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Maybe you are looking for

  • Cannot connect to iTunes store after software restore

    Hello, all, Last week I took my iMac in to the Apple Store to have its internal hard drive replaced. After retrieving the computer, I did a restore off of my Time Machine backup. The restore went smoothly...except that I now cannot do iCloud-related

  • Read any XML File Elements using SAX Parser in J2se

    Hi All I can able to parsed one structured XML file using SAX Sample code : // ===========================================================      // SAX DocumentHandler methods      // ===========================================================      pu

  • Java.sql.SQLException: while calculating row count: Unexpected exception :

    I am working with JDBC that is connected to MS Access 2003 file. I wrote and tested in MS Access following query and all it is working well. If I write this query and execute it is working well. pstm = DBConnect.prepareStatement( "SELECT Parameter.Na

  • Activity on stolen phone?

    I believe that my new iPhone was stolen the other day. After it was noticed missing (and about 20min after guests left) there was activity reported on it. It says GPRS under my phone history. Does this mean someone definitely used it? Is there anythi

  • Saving Drafts on IMAP account that's forced to use SMTP outbound server

    Hi! Occasionally, I'll get messages from OSX Mail telling me that it can't save a copy of a draft on an IMAP address, and when I send said message, it never shows up in my sent items folder. Due to limitations with my ISP, I cannot use the IMAP outbo