FS-BP - Service to find Business Parter by TaxNumber

Hi everyone,
I'm working with SAP BS 6.0, using the standard service BusinessPartnerDataManagementQueryBusinessPartnerIn. This service has 2 operations, FindByIdentification and FindByBasicData, but we also need to search a BP by TaxNumber.
Do anyone know if there is a service for searching Business Partners by TaxNumber?
Thanks

Enterprise services are assigned to process components. Looking at process components in ESM FS you will find process component "Business Partner Data Management". 
This process component has three Service Interfaces, among others "Query Business Partner In". It also has a Business Object "Business Partner" assigned to it.
According to Enterprise SOA governance and design rules each business object can only be assigned to one Process Component. This means that the one we are looking at groups all operations (enterprise services) for Business Partner.
So the short answer would be: if you do not see the service in this process component, the service does not exist...
I hope this helps.
Regards,
Andrzej K.

Similar Messages

  • Error while consuming "Find Business Partner Elements by Elements" service

    Hi,
    I am consuming the standard enterprise service "Find Business Partner Elements by Elements" with technical name "BusinessPartnerCRMElementsByElementsQueryResponse_In" in Webdynpro CE 7.1 . The service provider is CRM 7.0.
    The response from the enterprise service contains a structure called categorycode as ,
    <CategoryCode/>
    This seems to throw an error in when we execute the application . The error we receive is
    1. "Check nested exception for details. (Parameter set failure. The runtime was not able to set some result parameter value."
    2. Caused by: com.sap.dictionary.runtime.DdCheckException: Value  is not valid; enter a value that consists of exactly 1 characters at com.sap.dictionary.runtime.DdTypeString.checkValid(DdTypeString.java:287) 
    The details of the exceptions are as follows
    com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Connection IO Exception. Check nested exception for details. (Parameter set failure. The runtime was not able to set some result parameter value. See nested exception for details.) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.deserializeResponse(SOAPTransportBinding.java:1621) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.readSOAPResponseMessage(SOAPTransportBinding.java:278) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1120) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:779) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:746) at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DInterfaceInvokerImpl.invokeOperation(DInterfaceInvokerImpl.java:76) at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClassExecutable.execute(WSGenericModelClassExecutable.java:73) ... 78 more Caused by: com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Parameter set failure. The runtime was not able to set some result parameter value. See nested exception for details. at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.deserializeParameter(SOAPTransportBinding.java:1941) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.deserializeResponse(SOAPTransportBinding.java:1544) ... 84 more Caused by: com.sap.tc.cm.base.exception.BaseModelRuntimeException: Attribute value is not valid for attribute 'CategoryCode' of model class 'com.sap.demo.bpsearchwd.model1.BPCRMElmntRspBP' at com.sap.tc.cm.base.model.BaseGenericModelClass.setAttributeValue(BaseGenericModelClass.java:327) at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClass.setAttributeForName(WSGenericModelClass.java:187) at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClass._setField(WSGenericModelClass.java:65) at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClass._setField(WSTypedModelClass.java:141) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readElement(InstanceBuilder.java:642) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readSequence(InstanceBuilder.java:1060) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readContent(InstanceBuilder.java:1208) at com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType.deserialize(GeneratedComplexType.java:1318) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readElement(InstanceBuilder.java:573) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readSequence(InstanceBuilder.java:1060) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readContent(InstanceBuilder.java:1208) at com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType.deserialize(GeneratedComplexType.java:1318) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.deserializeParameter(SOAPTransportBinding.java:1920) ... 85 more Caused by: com.sap.dictionary.runtime.DdCheckException: Value  is not valid; enter a value that consists of exactly 1 characters at com.sap.dictionary.runtime.DdTypeString.checkValid(DdTypeString.java:287) at com.sap.tc.cm.base.model.BaseGenericModelClass.setAttributeValue(BaseGenericModelClass.java:324) ... 97 more
    Has anyone encountered this problems .? Any ideas on how to fix this would be very helpful.
    Thanks and Regards
    Bharathwaj

    Hi,
    Caused by: com.sap.dictionary.runtime.DdCheckException: Value is not valid; enter a value that consists of exactly 1 characters at com.sap.dictionary.runtime.DdTypeString.checkValid(DdTypeString.java:287)
    1       Person       The business partner is a natural person.
    2      Organization      The business partner is an organization.
    3      Group      The business partner is a group of natural persons or organizations.
    Are you setting any values to this?
    Regards
    Ayyapparaj

  • Could not find a part of the path 'C:\Program Files\Update Services\Schema\

    clean SC 2012 R2 RTM.
    1. had problems with WSUS installation/post configuration
    2. found a blog with an identical problem where the problem was solved with the call to Microsoft. Tools directory was missing.
    I followed the suggestion: reinstalled WSUS using ps and wsusutil.
    I canceled WSUS configuration at recommended step. Everything looked fine.
    But after SUP creation I found SMS_WSUS_CONFIGURATION_MANAGER warning.
    I checked WCM.log and found Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.
    When checked there was no Schema folder in the path above. So it's just missing as folder TOOLS before troubleshooting.
    Any suggestions for fixing this.
    Thanks.
    Here is partial WCM that could help to find the issue, I clearly see that there is no Schema directory in C:\Program Files\Update Services:
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:14 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
    Successfully inserted WSUS Enterprise Update Source object {91F81925-CC1D-40C0-98C3-902AD3717594} SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1716 TID=4536 GMTDATE=Sat Dec 07 22:10:22.831 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
    Shutting down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    Shutting Down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
    SMS_EXECUTIVE started SMS_WSUS_CONFIGURATION_MANAGER as thread ID 4168 (0x1048). SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:38 PM 2008 (0x07D8)
    This confman.contoso.lan system is the SMS Site Server. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
        SUP0: confman.contoso.lan, group = CONFMAN, nlb = SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Waiting for changes for 1 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    Wait timed out after 0 minutes while waiting for at least one trigger event. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:43 PM 4168 (0x1048)
    Timed Out... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
    No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Setting new configuration state to 4 (WSUS_CONFIG_SUBSCRIPTION_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
    Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:27 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
    Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
    Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
    PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1668 TID=4168 GMTDATE=Sat Dec 07 22:55:35.051 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
    SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

    >Any Errors in SUPSetup.log and WSUSCtrl.log log files?
    No errors in these files. As I mentioned there is no Schema folder in  Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~ 
    Here are 3 repetitive errors in WCM.log:
    1. PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
    errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
    Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~  
    at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~  
    at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
    packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
    sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile)
    2. Failed to publish client with error = 0x80070003
    3. HandleSMSClientPublication failed.
    "When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

  • Can't log on with administrator user by finding the message "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.

    Hi,
    Now, my Windows 2008 R2 Enterprise server are running in the domain. It have problem about some one in my team have remote my server with the user administrator while I'm remote it now. It make my session loss. I tried to remote it again but I found
    the message at the log on screen about "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on."
    Now, nobody can't remote with administrator user into this server. I have check the application log. I found the error message like this.
    ++++++++++++++++++++++++++++
    Source: Desktop Window Manager
    Event ID: 9003
    Detail: None The Desktop Window Manager was unable to start because a composited theme is not in use
    ++++++++++++++++++++++++++++
    Source: Microsoft-Windows-Winsrv
    Event ID:10002 
    Detail: The following application was terminated because it was hung: mmc.exe.
    ++++++++++++++++++++++++++++
    Source: Microsoft-Windows-Winsrv
    Event ID:10002 
    Detail: The following application was terminated because it was hung: javaw.exe.
    ++++++++++++++++++++++++++++
    Source: Microsoft-Windows-Winsrv
    Event ID:10002 
    Detail: The following application was terminated because it was hung: Explorer.exe.
    ++++++++++++++++++++++++++++
    Source:Desktop Window Manager
    Event ID:9009
    Detail:The Desktop Window Manager has exited with code (0x40010004)
     ++++++++++++++++++++++++++++
    Source:Microsoft-Windows-Winlogon
    Event ID:6005
    Detail:The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
    ++++++++++++++++++++++++++++
    In addition, I can log on this server with other user but I can't log off by it's showing the message "please wait for the system Event Notification service". Normally, the problem can solve by reboot the server. But how can be solve this problem
    by we do not reboot the server?

    Hi,
    The cause of unable to remote back to the server seems to be services hung, please try to reset session as the article below guides to see if it works:
    Windows Server: Remote Desktop Error: The task you are trying to do can't be completed because Remote Desktop Services is currently busy
    http://social.technet.microsoft.com/wiki/contents/articles/28636.windows-server-remote-desktop-error-the-task-you-are-trying-to-do-can-t-be-completed-because-remote-desktop-services-is-currently-busy.aspx
    If the issue can always be re-produced, then I would suggest you fully patch the system.
    More information for you:
    The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on
    https://social.technet.microsoft.com/Forums/windows/en-US/c58bfbd5-1d63-47e3-a489-6d8c8778b76b/the-task-you-are-trying-to-do-cant-be-completed-because-remote-desktop-services-is-currently-busy?forum=winserverTS
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Powerpivot add-in installation issue "Could not find a part of the path"

    Hello, 
    I got a Windows Server 2008R2 terminal server with Office 2010 and Powerpivot installed. I have an issue for some users, not every user get this error. When trying to add the Powerpivot add-in in Excel the following error message is displayed: 
    Name: 
    From: file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    ************** Exception Text **************
    System.Deployment.Application.DeploymentDownloadException: Downloading file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto did not succeed. ---> System.Net.WebException:
    Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft
    Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       --- End of inner exception stack trace ---
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       at System.Net.FileWebRequest.GetResponseCallback(Object state)
       --- End of inner exception stack trace ---
       at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.FileWebRequest.GetResponse()
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
       --- End of inner exception stack trace ---
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
    I have checked the path and I found nothing. I could understand the problem if all users got this error but it's online a handfew of users. Other users can add the add-in in Excel without any issue. All the users are in the same domain and they use the one
    and only terminal server on the site.
    Any advice? I've searched the web but haven't found anything.
    Thanks in advance!

    Guys, I think I solved the
    issue:
    Symptoms
    1. Power Pivot SQL 2012 32-bit installed over the old version without
    deinstalling it
    2. Installed with a user with administrator rights
    3. It worked under the profile with admin rights, it didn't work under the
    normal users w/o admin rights and threw this error message: Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/10/Microsoft.AnalysisServices.XLHost.Addin.VSTO
    did not succeed.
    4. In the admin profile, it went to the path "110":  C:/Program
    Files (x86)/Microsoft Analysis Services/AS Excel
    Client/110/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    5. In the normal profile, it went to the - wrong - "10" path:
    C:/Program Files (x86)/Microsoft Analysis Services/AS Excel
    Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
    SOLUTION
    1. ADMIN: Installed VSTO 4.0
    2. ADMIN: Checked if the .NET Programmability Support was installed - it was -
    if not, install it!
    3. NORMAL USER: Create a .reg file (Backup your registry before!) and
    use it UNDER THE NORMAL USER!!!
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Microsoft\Office\Excel][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Microsoft.AnalysisServices.Modeler.FieldList]
    "Description"="Microsoft SQL Server PowerPivot for Microsoft Excel"
    "FriendlyName"="PowerPivot for Excel"
    "LoadBehavior"=dword:00000003
    "Manifest"="C:\\Program Files\\Microsoft Analysis Services\\AS
    Excel Client\\110\\Microsoft.AnalysisServices.XLHost.Addin.vsto|vstolocal"
    "CartridgePath"="C:\\Program Files\\Microsoft Analysis
    Services\\AS OLEDB\\110\\Cartridges\\"
    4. NORMAL USER: Rename the registry key
    "HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User Settings\Microsoft.AnalysisServices.Modeler.FieldList"
    into
    "HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User
    Settings\Microsoft.AnalysisServices.Modeler.FieldList_old"
    5. NORMAL USER: Start up Power Pivot and it should
    work now!
    Analysis
    IMHO the issue lies in the fact, that the Power Pivot
    installer creates two problems:
    The first issue is that the path to the add-in under
    the NORMAL user is simply wrong and points to a wrong location (the
    "10" in the path). In the admin profile, where it was originally
    installed, it points to the "110" path which is correct.
    The second issue is that the installation procedure
    somehow needs to create a registry key (the one under point 4 in the solution)
    to complete it self and if this key already exists it fails to install and
    throws up weird error messages. If you delete or rename this key, it is created
    again (exactly in the same way) but then everything works out.
    Hope this
    helps!
    Regards, Reto

  • Not able to find business system

    Guys ,
    I am not able to find my business system in service without party -> business system in integration directory .

    Hi,
    did you have a look at this:
    Defining a Business System as a Service
    http://help.sap.com/saphelp_nw04/helpdata/en/3e/60653f0c9fa075e10000000a114084/content.htm
    BTW
    but first you must create it in the SLD:
    Configuring a Business System
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/content.htm
    and if you want to know how to insert a technical system you can take a look at my weblog:
    Registering a new technical system in SLD - ABAP based
    /people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
    Regards,
    michal
    Message was edited by: Michal Krawczyk

  • Latest jdeveloper 11.1.2.1.0 doesn't have Web service Proxy at Business Tie

    I have installed the latest Jdeveloper 11.1.2.1.o and tried to create a wsrp consumer but couldn't find the "Generate Web Service Proxy" under Business Tier -> Web service as suggested in developer's guide.
    Did I miss anything? Should I installed any extention patches? Is there any other way to create a wsrp consumer to test the sample wsdl generated from wsrp producer for .net?
    Thanks,
    Judy

    All right, It turns out I have to install jdeveloper 11.1.1.6 instead.

  • Where can we find the part numbers for Multisim and Ultiboard professional versi

    I want to purchase Multisim an Ultiboard, professional version. We got a quotation with the following answer:
    Part number: 852798-11J  Upgrade, NI Academic site licence;Q3 2009 Department Teaching Circuit Design Software Option
    Part Number:900798_11    NI academic Site Licence-Department Teaching Maintenance for Circuits Option Includes automatic SW upgrades for 1 year
    I have no idea where I can find those part numbers on the NI web site and for me the qouotation reffers to the academic version not the professional.
    Can anybody from NI clarify the mystery.
    John 

    Johnnelu,
    Thanks for your reply.   If you received a quotation, please email me directly with the quotation number and I will have someone update this for you.  I am not sure why you would have received a quote on the educational version in place of the Professional version.
    Specifically answering your PN questions... here are the current P/Ns for the Professional Design Suites (Multisim and Ultiboard). 
    NI Circuit Design Suite, Base ->          779930-09
    NI Circuit Design Suite, Full ->            779928-09
    NI Circuit Design Suite, PowerPro ->  779927-09
    http://www.ni.com/multisim/professional.htm  
    You can get price information online - you will need to select the specific item on the left and
    set your country code on the top.
    Regards,
    Patrick Noonan
    Business Development Manager
    National Instruments - Electronics Workbench Group
    50 Market St 1-A
    South Portland, ME 04106
    Phone: 207 892-9130
    Email: [email protected] 

  • Unable to find attachment part

    I am getting the below error in weblogic while calling web service running in it.
    Any suggestions?
    Thanks,
    com.bea.xml.XmlException: Unable to find attachment part for href = id0
         at weblogic.wsee.bind.types.AttachmentBase.deserializeType(AttachmentBase.java:108)
         at weblogic.wsee.bind.types.TypeRegistry.deserializeType(TypeRegistry.java:103)
         at weblogic.wsee.bind.runtime.internal.BaseDeserializerContext.deserializeType(BaseDeserializerContext.java:85)
         at weblogic.wsee.bind.runtime.internal.BaseDeserializerContext.deserializeWrappedElement(BaseDeserializerContext.java:133)
         at weblogic.wsee.codec.soap11.SoapDecoder.decodePart(SoapDecoder.java:398)
         at weblogic.wsee.codec.soap11.SoapDecoder.decodeParams(SoapDecoder.java:236)
         at weblogic.wsee.codec.soap11.SoapDecoder.decodeParts(SoapDecoder.java:163)
         at weblogic.wsee.codec.soap11.SoapDecoder.decode(SoapDecoder.java:116)
         at weblogic.wsee.codec.soap11.SoapCodec.decode(SoapCodec.java:138)
         at weblogic.wsee.ws.dispatch.server.CodecHandler.decode(CodecHandler.java:138)
         at weblogic.wsee.ws.dispatch.server.CodecHandler.handleRequest(CodecHandler.java:39)
         at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:127)
         at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:85)
         at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
         at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
         at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java:44)
         at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseWSServlet.java:173)
         at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java:92)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3245)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2003)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1909)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    </bea_fault:stacktrace></detail></soapenv:Fault></soapenv:Body></soapenv:Envelope>

    bash-4.0# pacman -Qo /opt/kde/bin/kpdf
    /opt/kde/bin/kpdf is owned by kdemod3-kdegraphics-kpdf 3.5.10-1
    How to add /opt/kde/bin/kpdf to my path.
    Also it is not shown in the KDE Kickoff application launcher. Generally any Kde application is shown in the kickoff launcher

  • Discoverer Report: How to find Business Area name from Report Name.

    Hi
    I opened a report in Disco Desktop 4 -> Resonsibiolity --> Report Name.
    So I know Report name but don’t know which Business Area it belongs to.
    How to find Business Area Name from Report Name?
    Cheers
    Vijay

    Hi,
    There is no relationship between reports and business areas. Each report can be built from many folders. Each folder can be in many business areas.
    However you can try the following SQL which may give you the result you want for an v5 EUL. You will have to modify for Discoverer 4 EUL:
    select distinct doc_name, obj.obj_name folder_name, bas.ba_name
    from eul_us.eul5_documents doc
    , eul_us.eul5_elem_xrefs xref
    , eul_us.eul5_expressions exp
    , eul_us.eul5_objs obj
    , eul_us.eul5_ba_obj_links bol
    , eul_us.eul5_bas bas
    where xref.ex_from_id = doc.doc_id
    and doc.doc_name = &your_report
    and xref.ex_to_id = exp.exp_id
    and obj.obj_id = exp.it_obj_id
    and bol.bol_obj_id = obj.obj_id
    and bas.ba_id = bol.bol_ba_id
    Rod West

  • Re:one or more project in the solution was not loaded correctly, Could not find a part of the path

    Please I have been having  problems loadig the adventuremultdime2012, I downloaded the visual studio 2013
    but it is showing me this path
    C:\Users\PC\AppData\Local\Temp\Temp5_AdventureWorks Multidimensional Models SQL Server 2012 (3).zip\AdventureWorks Multidimensional Models SQL Server 2012\Enterprise\AdventureWorksDW2012Multidimensional-EE\AdventureWorksDW2012Multidimensional-EE.dwproj :
    error  : Could not find a part of the path 'C:\Users\PC\AppData\Local\Temp\Temp5_AdventureWorks Multidimensional Models SQL Server 2012 (3).zip\AdventureWorks Multidimensional Models SQL Server 2012\Enterprise\AdventureWorksDW2012Multidimensional-EE\AdventureWorksDW2012Multidimensional-EE.dwproj'.
    I guess its a hidden file or I have deleted it, because I cant find it too, any help please

    Looks like you've either moved the file to somewhere else or it got deleted
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • I have files that may have been created in various versions of Illustrator. We need to be able to open them, but all we have is CS6 suite. I have called and been told that "technicians at adobe" could perform a paid service to find out what the files were

    I have files that may have been created in various versions of Illustrator. We need to be able to open them, but all we have is CS6 suite. I have called and been told that "technicians at adobe" could perform a paid service to find out what the files were created in and get them to be useable in InDesign 6, but I'd need an email address that was registered to our software to give the help desk person. After finding the correct email address, different adobe help number people told me to come here to ask as there is no phone support. Can anyone get me to an adobe technician that can provide a price quote for finding out what created these files and for getting them converted? Thanks.

    Sorry, I understood you to say you had the whole CS6 suite, which includes Illustrator.
    As far as finding out what the files are, sometimes you can look at them in a text editor to figure this out. See below; the, Creator Tool line. Not every software package makes it this easy, though.

  • Please restore e-mail or at least give us some real information.  Tech support is almost smug in their response for additional information.  The iCloud status page has said the same thing since yesterday.  A real dis-service.  My business depends on this!

    Please restore e-mail or at least give us some real information.  Tech support is almost smug in their response for additional information.  The iCloud status page has said the same thing since yesterday.  A real dis-service.  My business depends on this!  Any one have any suggestions not being offerd by tech support or Apple?  Anything at all?

    mdjb wrote:
    I just lost a big opportunity to get a new client because of this!!   almost 24 hours now without any email service. I was one of the original.mac customers.  I am over this time to move on. It is an inferior product.
    My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
    APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
    And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service.

  • I think HD is broken, is there a way to find a part of it thats not broken.

    im not an advanced mac user so please dont laugh, but what i figured out is (i think) is that my hard drive is broken, first it started of with random apps just shutting down, and having the "restart" your computer sing popping out, where u cant do anything but manually turn off ur mac. I tried doing the repair disk with installer disc, all it tells me is that it could not be repaired because of an error, is there anyway to find the part of the hard drive that has the error or broken and not use it? and install the osx on the part thats still good? if not, can i get a external hard drive and install os on that and how would i do that? and how would i boot that os and not the one thats installed on my mac already if not that is there anyways to repair the disk ( im assuming that sending the laptop to apple and replacing the harddrive there would be too costly as ,i am a poor college student)
    thank you
    Message was edited by: mp057812

    Do you have specific evidence that the internal drive is really damaged? As I said, the drive itself could be in perfect condition and it is just the directory that is damaged which is not a physical part of the drive.
    If you don't care about what is on there now you can format the drive with write zeros (once) option to check the drive condition. This will erase all data! You can then reinstall the operating system and replace any files you have. Before doing this you can copy any files you may still want on the drive, but I would not replace any guaranteed good copy with a questionable copy. Let's say you had a paper you were working on with a copy from two days ago on the flash drive and a copy from yesterday on the main drive. I'd copy the main drive version in case it works but is more up to date, but I'd still keep the old version in case the new version was corrupted. The only way to tell is to open a file and see if it looks okay.
    [Formatting & Partitioning a Hard Drive in OS X - Tiger and Leopard|http://www.kenstone.net/fcphomepage/partitioningtiger.html]
    [Journaling, Zeroing, Partitioning & OS 9 driver|http://forums.bombich.com/viewtopic.php?t=4084]
    [Kappy's extensive hard drive formatting post|http://discussions.apple.com/thread.jspa?messageID=8340551&#8340551]
    [BDaqua's Formatting instructions|http://discussions.apple.com/message.jspa?messageID=8901255#890125 5]
    [Mac OS X 10.4, 10.5: About installation options|http://support.apple.com/kb/HT1545?viewlocale=en_US]

  • Vs2010 azure project remove instead of unload now cannot find a part of the path build error

    I know this isn't a vs online question but I wasn't sure where else to post this one...
    I have an azure project built in vs2010 with a web role and worker role project. I accidently removed the worker role project then re added through 'add existing project'. Now when I try and build I get
    Error 1   Could not find a part of the path 'C:\Users\Mat\Documents\Visual Studio 2010\Projects\MvcApplication7 - Copy (4)\CubeCloud1.Azure\WorkerRole1\'.    C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure
    Tools\1.8\Microsoft.WindowsAzure.targets    987 5   CubeCloud1.Azure
    Line 987 is the start of the  element.
    Looking at the path, the folder WorkerRole1 doesn't exist but looking at back ups of this project it doesn't exist in them either.
    I've tried adding the WorkerRole1 folder but then I get  Error 102 CloudServices38 : The entrypoint dll is not defined for worker role WorkerRole1.    C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure Tools\1.8\Microsoft.WindowsAzure.targets   
    987 5   CubeCloud1.Azure
    I'm not sure going down the path of adding this folder anyway is the correct solution (I could be wrong of course).
    thanks,

    I don't know why this worked but I made a copy of the solution. When I opened the solution it had lost a reference to one dll (Windows Storage I think). I added that, then it builds ok now.

Maybe you are looking for

  • Determining spectral density of poisson process (carson theorem)

    Has anyone ever determined code for working out the spectral density (or equivalent) of a Poisson process, based on Carson theorem (or a variant thereof)? It doesn't have to be in Labview, but that would be the easiest (or VB).Message Edited by Jo on

  • Advanced Editing Tool

    I am using the thouchup text tool (I use Acrobat 9 Pro) to edit the color of words in a pdf. This problem occurs when I have saved the changes and closes down the pdf, and the reopening it. What happens is that document gets distorted, words suddenly

  • Problem with SAP logon by VBA

    Hi, I'm new in the community and I'm also new with SAP, so sorry for any errors. For my work I need to open SAP by excel (VBA); and I have found the code below but it don't work. Sub Work() Set app = CreateObject("Sapgui.ScriptingCtrl.1") Set Connect

  • Lost the control bar

    I have created a video with a control bar in Flash 8. When I run the .swf file by itself (in Flash player or IE) the control bar is there but when I add it to my web page the control bar is missing. Can anyone help please? My embedding code is:      

  • Sending Web Pages via Safari - no cooperation from Yahoo

    I recently switched from Entourage to Mail. One reason was the ability to send a web page via Mail. As a trial, I e-mailed a web page to my Yahoo account. When I viewed the e-mail in Yahoo via Safari, all the images had "?". When I viewed the same e-