FTP adapter: exc. 550 : No such file or directory
Hi Men,
I'm working on 7.0 version.
I am facing a problem with FTP adapter.
In few words, I configured a CC FTP sender to get files from a remote server (in test mode).
As I start this channel, CC monitor retrieves the following error message:
"Could not process file '<getThisFile>.xml': com.sap.aii.adapter.file.ftp.FTPEx: 550 outbox: No such file or directory."
where '<getThisFile>.xml' is filename and "outbox" is the directory.
I presume that it recognizes the filename and the directory but the error message says "dir or file are wrongs".
I tried the same action by command line with same user and password ftp. Result: I was able to get this file from dir "outbox".
...I should exclude a file permission problem.
Here below, some Logs from "default.trc" file:
#1.5#001125BDB332006E000000390006802E0004400DCACAD490#1196327887885#com.sap.aii.adapter.file.File2XI##com.sap.aii.adapter.file.File2XI.processFtpList()#J2EE_GUEST#0####ff6d7bd09e5b11dc9e34001125bdb332#XI File2XI[CC_FTP_SND_Order_new/BS_Arianna_DEV/]_57##0#0#Error#1
#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File#Plain###Retrieving file 'orders.00089872.xml' failed unexpectedly with com.sap.aii.adapter.file.ftp.FTPEx: 550 outbox: No such file or directory.#
where:
CC_FTP_SND_Order_new is the CC sender;
BS_Arianna_DEV related Business Service.
'orders.00089872.xml' file to get.
'outbox' dir path
.... nothing else.
Have you ever faced a similar problem? Any suggestion to fix it?
Thanks in advance
Alex
Hi friends,
FTP server is a Microsoft Windows XP [Version 5.1.2600]
When I log in, I only change in a sub dir called outbox.
If I put back slash before (for WinOS), the dir path is wrong (cd \outbox should mean that outbox is under root).
Some FTP server logs:
Nov 29 09:40:00 golem ftpd[25272]: USER 8023******
Nov 29 09:40:00 golem ftpd[25272]: PASS password****
Nov 29 09:40:00 golem ftpd[25272]: SYST
Nov 29 09:40:00 golem ftpd[25272]: TYPE Image
Nov 29 09:40:00 golem ftpd[25272]: CWD outbox
Nov 29 09:40:00 golem ftpd[25272]: PASV
Nov 29 09:40:00 golem ftpd[25272]: LIST orders*
Nov 29 09:40:00 golem ftpd[25272]: CWD outbox
Nov 29 09:40:00 golem ftpd[25272]: QUIT
I suppose that XI works fine and FTP server receives two times the "cd outbox" command. II also suppose that this Windows FTP server memorizes the subdir "outbox" each time I log in by FTP with user "8023******"
Similar Messages
-
FTP Adapter Configuration For End Of File
Hi Team,
i'm doing DB polling and writing that contents to on file using FTP Adapter, DB poller will poll each line @ a time and writes to remote Server
in my FTP adapter usage, after writing the whole contents which i pass from my bpel,
i need to use some hardcoded values at the end of the file
Eg.
test1|test2|test3|test4
test1|test2|test3|test4
test1|test2|test3|test4
test1|test2|test3|test4
@@Thanks@@
Like shown above after writing some contents
i need to add @@Thanks@@ then one ENTER
Thanks in advanceOk, now I'm understanding you are using "Append existing file" option checked... The approach won't work with appending on...
If you know when it is the end of the file you can do something like this...
At the first line file will be like this...
line1|line1
Second line...
line1|line1
line2|line2
When you receive the third line and you know that's the last line you write firstly this...
line1|line1
line2|line2
line3|line3
And then you write the @@Thanks@@ at the end using a different translation schema... Possibly a different FTP Adapter writing on the same file...
line1|line1
line2|line2
line3|line3
@@Thanks@@
However, if you don't know when you are receiving the last line and/or you need the @@Thanks@@ always there it won't work with append option... You'll possibly need a sync read FTP adapter to read the file and rewrite it again at every iteration...
Cheers,
Vlad -
ESB- FTP adapter unable to poll a file
I have a FTP adapter it has to poll files, with diff naming convention.(like "asd", 'wer',"jkl","AVC"). But the adapter was unable to poll a file which name start with AVC
reamining files are polled successfully.At ftp location ftp adapter will poll file and place all records into DB through ESB,for ESB we can set adapters as inbound.Plz give me any suggessions to solve this problem(10.1.3.4).Thq.I checked the error logs and it informed it was not able to create the stage directory where as i am only creating the stage directory and providing the path to it.so i could not really understand the exact error.
Does a stage directory get created automatically anywhere else? -
Error showing missing file "550 /pub/softpaq/sp49001-49500/sp49174.exe: No such file or directory."
I try to install HP support assistant and keep getting this error
550 /pub/softpaq/sp49001-49500/sp49174.exe: No such file or directory.
How do I fix it?
If will not even let me recover to a past date in windowsHi @nascarguy67
Welcome to the HP Forums!
It is a wonderful place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I understand you are unable to install the HP Support Assistant. If there is a previous installation of the HP Support Assistant did you try uninstalling it first?
Have you tried installing it in Safe Mode? Entering Safe Mode (Windows 7)
Have you checked for viruses or malware?
You can try this as it will scan for corrupted files and try to repair them.
Go to the command prompt and right click and run as administrator
Type sfc /scannow and press enter.
Wait for this to complete.
Now retry the installation.
Have you made any changes to your notebook?
If the issue still remains I suggest you do a recovery back to factory.
Performing an HP system recovery (Windows 7)
During the recovery you will notice an option to backup your personal files to prevent data loss. If you have not done one yet, now is a good time.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
You can consider contacting HP support at any time for further assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
No such file or directory" which is not allowe
Hi,
PI --> AIX (version=5.3, arch=ppc64)
Target --> FTP server (SunOS 5.8)
PI Software Build Information
Make Release NW07_08_REL
SPS Number 08
I used File Send Adapter in my communication channels that is FTP ... scenario is working fine..
but in the RWB- Communication Channel Monitoring(ERROR Status)
The FTP server was running on UNIX..
If the file is there in the source directory it was processing successfully..
even though the remaing all the time it was throwing the following Error Mesage in the RWB-Communication Channel Monitoring..
Could not process file 'DELRESS*.PRD: No such file or directory': com.sap.exception.standard.SAPIllegalArgumentException:
The parameter "argument" has the value
"ftp://XX.XX.XX.XX:21/var/mis/interface/MRO/E100SW/get_test/DELRESS*.PRD: No such file or directory", so it contains the
character "ftp://XX.XX.XX.XX:21/var/mis/interface/MRO/E100SW/get_test/DELRESS*.PRD: No such file or directory" which is not allowed
drwxrwxrwx 3 develp users 512 Oct 21 16:44 get_test
Please Suggest me.Aravind
Thank,
1. I added Host name(SI3-XXX.XXX.XXX.XXX)
2. I'm try to use "\" than "/"
File Send Adapter
Source Directory : /var/mis/interface/MRO/E100SW/get_test --> \var\mis\interface\MRO\E100SW\get_test
File Name : AAAAA.txt
Server : SI3
connection mode : Per File Transfer
RWB Result(First case)----
11/13/09 9:03:26 AM Processing started
11/13/09 9:03:21 AM Retry interval started. Length: 10.0 seconds
11/13/09 9:03:21 AM Could not process file 'AAAAA.txt: No such file or directory': com.sap.exception.standard.SAPIllegalArgumentException: The parameter "argument" has the value "ftp://SI3:21/var/mis/interface/MRO/E100SW/get_test/AAAAA.txt: No such file or directory", so it contains the character "ftp://SI3:21/var/mis/interface/MRO/E100SW/get_test/AAAAA.txt: No such file or directory" which is not allowed
RWB Result(Second case)----
11/13/09 9:03:26 AM Retry interval started. Length: 10.0 seconds
11/13/09 9:03:26 AM Could not process file 'AAAAA.txt: No such file or directory': com.sap.exception.standard.SAPIllegalArgumentException: The parameter "argument" has the value "ftp://XXX.XXX.XXX.XXX:21/var/mis/interface/MRO/E100SW/get_test/AAAAA.txt: No such file or directory", so it contains the character "ftp://XXX.XXX.XXX.XXX:21/var/mis/interface/MRO/E100SW/get_test/AAAAA.txt: No such file or directory" which is not allowed
RWB Result(Third case)----
11/13/09 9:04:43 AM Retry interval started. Length: 10.0 seconds
11/13/09 9:04:43 AM An error occurred while connecting to the FTP server 'SI3:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 \var\mis\interface\MRO\E100SW\get_test: No such file or directory.'. For details, contact your FTP server vendor.
11/13/09 9:04:43 AM Processing started
11/13/09 9:04:40 AM Retry interval started. Length: 10.0 seconds
RWB Result(4th case)----
11/13/09 9:06:05 AM Retry interval started. Length: 10.0 seconds
11/13/09 9:06:05 AM An error occurred while connecting to the FTP server 'XXX.XXX.XXX.XXX:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 \var\mis\interface\MRO\E100SW\get_test: No such file or directory.'. For details, contact your FTP server vendor.
It is always same problem
Please help. -
Tar/write.c:49:28: error: ext2fs/ext2_fs.h: No such file or directory
Ok, I'm stuck. I'm trying to compile libarchive-1.3.1 ona a system and I get this error. I've tried this and that, but no luck ... anything obvious I need to install? Think there may be a broken symlink somewhere perhaps?
h-3.2# make
make all-am
make[1]: Entering directory `/media/cf/depends/libarchive-1.3.1'
if gcc -DHAVE_CONFIG_H -I. -I. -I. -I./libarchive -g -O2 -MT tar/bsdtar-write.o -MD -MP -MF "tar/.deps/bsdtar-write.Tpo" -c -o tar/bsdtar-write.o `test -f 'tar/write.c' || echo './'`tar/write.c; \
then mv -f "tar/.deps/bsdtar-write.Tpo" "tar/.deps/bsdtar-write.Po"; else rm -f "tar/.deps/bsdtar-write.Tpo"; exit 1; fi
tar/write.c:49:28: error: ext2fs/ext2_fs.h: No such file or directory
tar/write.c: In function 'write_hierarchy':
tar/write.c:599: error: 'EXT2_IOC_GETFLAGS' undeclared (first use in this function)
tar/write.c:599: error: (Each undeclared identifier is reported only once
tar/write.c:599: error: for each function it appears in.)
tar/write.c:601: error: 'EXT2_NODUMP_FL' undeclared (first use in this function)
tar/write.c: In function 'write_entry':
tar/write.c:742: error: 'EXT2_IOC_GETFLAGS' undeclared (first use in this function)
make[1]: *** [tar/bsdtar-write.o] Error 1
make[1]: Leaving directory `/media/cf/depends/libarchive-1.3.1'
make: *** [all] Error 2I've looked into Oracle Database 10g Express Edition (Universal), a .deb file, found no occi.h but did find lots of .so files (linux shared libraries). I'll try and adapt my code and Netbeans/g++ to that and see if it works...
I can't really install it since my 4GB computer is x64 and my i386 "only" has 186RAM... Enterprise Linux Release 5 Media Pack for x86 64 (64 bit) is 5.1GB+updates (~5GB each)... Not gonna waste my time installing that just for a project.
I sense i'm missing something obvious... although there's nothing obvious about *.oracle.com... information company they say? ;) -
Hi Folks:
I am doing one Dll file for TestStand , and got an error : d:\teststand3.5\teststand 3.5\examples\modaldialogs\mfc\tsapivc.h(18) : fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory
Could anyone help me out of that ??
Thanks in advance !This type library for the adapter API is embedded in the teapi.dll. If you are using Visual Studio.NET, there is an attribute called tlbid that you can use with the #import directive in order to import that embedded library (see the MSDN documentation for more details). For example:
#import tlbid(2)
In VC++ 6.0, there is no way to import embedded type libraries. Therefore, you must use the attached type library file (.tlb) with the #import directive. For example:
#import "TsAdpApi.tlb" -
Error: jndi.properties (No such file or directory)
Hi,
I created my EJB and a desktop application in the NetBeans.
I load my EJB on GlassFish
I still load my appCliente on NetBeans, nice it works.
But when I try to run my appClient just clicking on its icon in
its directory it doesn't work.
The message is jndi.properties (No such file or directory), but
the file is there.
My peace code:
Properties props = new Properties();
try{
props.load(new FileInputStream("jndi.properties"));
TesteEJBRemote t = (TesteEJBRemote) new InitialContext(props).lookup("Teste");
jTextField2.setText(t.getMessage() + t.toString());
}catch (IOException ex) {
//atxErros.setText(ex.getMessage());
Logger.getLogger(frmFrame.class.getName()).log(Level.SEVERE, null, ex);
jTextField2.setText(ex.getMessage());
} catch (NamingException ex) {
//atxErros.setText(this.atxErros + " " + ex.getMessage());
Logger.getLogger(frmFrame.class.getName()).log(Level.SEVERE, null, ex);
What shoud I do?I've looked into Oracle Database 10g Express Edition (Universal), a .deb file, found no occi.h but did find lots of .so files (linux shared libraries). I'll try and adapt my code and Netbeans/g++ to that and see if it works...
I can't really install it since my 4GB computer is x64 and my i386 "only" has 186RAM... Enterprise Linux Release 5 Media Pack for x86 64 (64 bit) is 5.1GB+updates (~5GB each)... Not gonna waste my time installing that just for a project.
I sense i'm missing something obvious... although there's nothing obvious about *.oracle.com... information company they say? ;) -
Issue with adadmin No such file or directory
Hi, I was trying to apply patch 9239089 and got issues related to adrelink. After going through the forums, I tried few things and now adadmin is not working.. Please help.
When I issue adadmin command all it gives is "sh: /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadminnew: No such file or directory"
adpatch command is still working.Sorry. I missed that.. It is 12.1.1, Oracle Linux 6. I think database version is 10.1.2
Here is the adrelink.log
You are running adrelink, version 120.43.12010000.6
Start of adrelink session
Date/time is Wed Jan 8 19:19:07 PST 2014
Log file is /home/oracle/ebs/apps/apps_st/appl/admin/VIS/log/adrelink.log
Command line arguments are
"force=n" "ranlib=n" "link_debug=n"
"filelist=/home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/plkapp000.txt"
Operating System Information (output of 'uname -a'):
Linux ebs.amineni.com 2.6.32-300.3.1.el6uek.i686 #1 SMP Fri Dec 9 18:39:00
EST 2011 i686 i686 i386 GNU/Linux
Backup Mode is "file"
Removing extra variables from the environment...
adrelink will save the following variables (if set):
- Generic:
"PATH ORACLE_HOME TMPDIR TZ APPL_TOP APPLFENV PLATFORM LD_LIBRARY_PATH COBDIR
LIBPATH NLS_LANG JAVA_TOP PERL5LIB"
- Shell-Specific: "PS1 PS2 PS3 PS4 IFS MAILCHECK _ LOGNAME A__z"
Beginning pass 1.
Processing 369 environment variables...
357 removed; 12 saved.
Beginning pass 2.
Processing 12 environment variables...
0 removed; 12 saved.
Done removing extra environment variables.
Removing Application products' bin directories from PATH ...
Done removing Application products' bin directories from PATH
Reading Oracle Applications environment file
Your Oracle Applications environment file is
/home/oracle/ebs/apps/apps_st/appl/VIS_ebs.env
Removing $FND_TOP/$APPLBIN from PATH ...
Done removing $FND_TOP/$APPLBIN from PATH
Removing extra variables from the environment (again)...
adrelink will save the following variables (if set):
- Generic:
"PATH ORACLE_HOME TMPDIR TZ LD_LIBRARY_PATH COBDIR LIBPATH NLS_LANG JAVA_TOP
PERL5LIB"
- Shell-Specific: "PS1 PS2 PS3 PS4 IFS MAILCHECK _ LOGNAME A__z"
Beginning pass 1.
Processing 340 environment variables...
331 removed; 9 saved.
Beginning pass 2.
Processing 9 environment variables...
0 removed; 9 saved.
Done removing extra environment variables (again).
Re-reading critical environment variables ...
Done re-reading critical environment variables
ORACLE RDBMS Version 10.1.0.5.0
Oracle Reports Version 10.1.2
Oracle Applications Release 12
Current product is AD
LADLIB is set to /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
Current product is ALR
LALRLIB is set to /home/oracle/ebs/apps/apps_st/appl/alr/12.0.0/lib/libalr.a
Current product is AP
LAPLIB is set to /home/oracle/ebs/apps/apps_st/appl/ap/12.0.0/lib/libap.a
Current product is AR
LARLIB is set to /home/oracle/ebs/apps/apps_st/appl/ar/12.0.0/lib/libar.a
LARSRW is set to /home/oracle/ebs/apps/apps_st/appl/ar/12.0.0/lib/xirar.o
$(LARLIB)
Current product is BOM
LBOMLIB is set to /home/oracle/ebs/apps/apps_st/appl/bom/12.0.0/lib/libbom.a
Current product is CRP
LCRPLIB is set to /home/oracle/ebs/apps/apps_st/appl/crp/12.0.0/lib/libcrp.a
Current product is CZ
LCZLIB is set to /home/oracle/ebs/apps/apps_st/appl/cz/12.0.0/lib/libcz.a
Current product is DT
LDTLIB is set to /home/oracle/ebs/apps/apps_st/appl/dt/12.0.0/lib/libdt.a
Current product is ENG
LENGLIB is set to /home/oracle/ebs/apps/apps_st/appl/eng/12.0.0/lib/libeng.a
Current product is FA
LFALIB is set to /home/oracle/ebs/apps/apps_st/appl/fa/12.0.0/lib/libfa.a
LFASRW is set to /home/oracle/ebs/apps/apps_st/appl/fa/12.0.0/lib/xirfa.o
$(LFALIB)
Current product is FEM
LFEMLIB is set to /home/oracle/ebs/apps/apps_st/appl/fem/12.0.0/lib/libfem.a
Current product is FF
LFFLIB is set to /home/oracle/ebs/apps/apps_st/appl/ff/12.0.0/lib/libff.a
Current product is FND
LFNDLIB is set to /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a
LFNDSRW is set to /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/xirfnd.o
$(LFNDLIB)
Current product is FTP
LFTPLIB is set to /home/oracle/ebs/apps/apps_st/appl/ftp/12.0.0/lib/libftp.a
Current product is GL
LGLLIB is set to /home/oracle/ebs/apps/apps_st/appl/gl/12.0.0/lib/libgl.a
Current product is GMA
LGMALIB is set to /home/oracle/ebs/apps/apps_st/appl/gma/12.0.0/lib/libgma.a
Current product is GMF
LGMFLIB is set to /home/oracle/ebs/apps/apps_st/appl/gmf/12.0.0/lib/libgmf.a
Current product is GML
LGMLLIB is set to /home/oracle/ebs/apps/apps_st/appl/gml/12.0.0/lib/libgml.a
Current product is IBY
LIBYLIB is set to /home/oracle/ebs/apps/apps_st/appl/iby/12.0.0/lib/libiby.a
Current product is INV
LINVLIB is set to /home/oracle/ebs/apps/apps_st/appl/inv/12.0.0/lib/libinv.a
Current product is MRP
LMRPLIB is set to /home/oracle/ebs/apps/apps_st/appl/mrp/12.0.0/lib/libmrp.a
Current product is MSC
LMSCLIB is set to /home/oracle/ebs/apps/apps_st/appl/msc/12.0.0/lib/libmsc.a
Current product is MSO
LMSOLIB is set to /home/oracle/ebs/apps/apps_st/appl/mso/12.0.0/lib/libmso.a
Current product is MSR
LMSRLIB is set to /home/oracle/ebs/apps/apps_st/appl/msr/12.0.0/lib/libmsr.a
Current product is MST
LMSTLIB is set to /home/oracle/ebs/apps/apps_st/appl/mst/12.0.0/lib/libmst.a
Current product is MWA
LMWALIB is set to /home/oracle/ebs/apps/apps_st/appl/mwa/12.0.0/lib/libmwa.a
Current product is PA
LPALIB is set to /home/oracle/ebs/apps/apps_st/appl/pa/12.0.0/lib/libpa.a
Current product is PAY
LPAYLIB is set to /home/oracle/ebs/apps/apps_st/appl/pay/12.0.0/lib/libpay.a
Current product is PO
LPOLIB is set to /home/oracle/ebs/apps/apps_st/appl/po/12.0.0/lib/libpo.a
LPOSRW is set to /home/oracle/ebs/apps/apps_st/appl/po/12.0.0/lib/xirpo.o
$(LPOLIB)
Current product is PON
LPONLIB is set to /home/oracle/ebs/apps/apps_st/appl/pon/12.0.0/lib/libpon.a
Current product is RG
LRGLIB is set to /home/oracle/ebs/apps/apps_st/appl/rg/12.0.0/lib/librg.a
Current product is WIP
LWIPLIB is set to /home/oracle/ebs/apps/apps_st/appl/wip/12.0.0/lib/libwip.a
Current product is WPS
LWPSLIB is set to /home/oracle/ebs/apps/apps_st/appl/wps/12.0.0/lib/libwps.a
Current product is WSM
LWSMLIB is set to /home/oracle/ebs/apps/apps_st/appl/wsm/12.0.0/lib/libwsm.a
Current product is XDP
LXDPLIB is set to /home/oracle/ebs/apps/apps_st/appl/xdp/12.0.0/lib/libxdp.a
LUSRLIB is /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/usrxit/libusr.a
Not linking Oracle Applications with any Oracle mail product
LALRSTUB is now set to
/home/oracle/ebs/apps/apps_st/appl/alr/12.0.0/lib/alstub.o
MAILLNK is now set to
/home/oracle/ebs/apps/apps_st/appl/alr/12.0.0/lib/alstub.o
Creating prefix makefiles ...
Done creating prefix makefiles
The file /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/plkapp000.txt
contains:
ad bin adadmin
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin
ad bin adadmin_wrapper
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin_wrapper
ad bin adaimgr
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adaimgr
ad bin adchkdig
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adchkdig
ad bin adctrl
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl
ad bin adctrl_wrapper
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl_wrapper
ad bin addefgen
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addefgen
ad bin addmimp
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addmimp
ad bin adgenhnm
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgenhnm
ad bin adgetreg
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgetreg
ad bin adident
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adident
ad bin adjava
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjava
ad bin adjkey
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjkey
ad bin admrgpch
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/admrgpch
ad bin adncnv
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adncnv
ad bin adodfcmp
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adodfcmp
ad bin adpchnew
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpchnew
ad bin adpatch_wrapper
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpatch_wrapper
ad bin adprmkey
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adprmkey
ad bin adpwmask
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpwmask
ad bin adregenv
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adregenv
ad bin adsplice
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adsplice
ad bin adsplice_wrapper
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adsplice_wrapper
ad bin adsstart
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adsstart
ad bin adurs /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adurs
ad bin adwait
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adwait
ad bin adwrknew
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adwrknew
Starting link of product 'ad' on Wed Jan 8 19:19:27 PST 2014
Current product is ad
Current product _TOP is $AD_TOP
Current prodarea is /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0
Relinking module 'adadmin' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15332.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin
Starting link of ad executable 'adadmin' on Wed Jan 8 19:19:27 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin.new \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adadmin.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadminnew] Error
1
Done with link of ad executable 'adadmin' on Wed Jan 8 19:19:29 PST 2014
Relink of module "adadmin" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adadmin_wrapper' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15361.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin_wrapper
Starting link of ad executable 'adadmin_wrapper' on Wed Jan 8 19:19:29 PST
2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin_wrapper.new \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adadmin_main.o
-lsql10 -lclntsh `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adadmin_wrapper]
Error 1
Done with link of ad executable 'adadmin_wrapper' on Wed Jan 8 19:19:29 PST
2014
Relink of module "adadmin_wrapper" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adaimgr' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15383.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adaimgr
Starting link of ad executable 'adaimgr' on Wed Jan 8 19:19:29 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adaimgr.new
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/aimain.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adaimgr] Error 1
Done with link of ad executable 'adaimgr' on Wed Jan 8 19:19:30 PST 2014
Relink of module "adaimgr" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adchkdig' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15405.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adchkdig
Starting link of ad executable 'adchkdig' on Wed Jan 8 19:19:30 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adchkdig
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adchkdig.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adchkdig] Error 1
Done with link of ad executable 'adchkdig' on Wed Jan 8 19:19:31 PST 2014
Relink of module "adchkdig" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adctrl' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15427.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl
Starting link of ad executable 'adctrl' on Wed Jan 8 19:19:31 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl.new \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/aictrl.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrlnew] Error 1
Done with link of ad executable 'adctrl' on Wed Jan 8 19:19:31 PST 2014
Relink of module "adctrl" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adctrl_wrapper' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15449.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl_wrapper
Starting link of ad executable 'adctrl_wrapper' on Wed Jan 8 19:19:31 PST
2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl_wrapper.new \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adctrl_main.o
-lsql10 -lclntsh `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adctrl_wrapper]
Error 1
Done with link of ad executable 'adctrl_wrapper' on Wed Jan 8 19:19:32 PST
2014
Relink of module "adctrl_wrapper" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'addefgen' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15471.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addefgen
Starting link of ad executable 'addefgen' on Wed Jan 8 19:19:32 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addefgen \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/addefgen.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addefgen] Error 1
Done with link of ad executable 'addefgen' on Wed Jan 8 19:19:32 PST 2014
Relink of module "addefgen" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'addmimp' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15493.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addmimp
Starting link of ad executable 'addmimp' on Wed Jan 8 19:19:32 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addmimp
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/dmmmain.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/addmimp] Error 1
Done with link of ad executable 'addmimp' on Wed Jan 8 19:19:33 PST 2014
Relink of module "addmimp" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adgenhnm' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15516.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgenhnm
Starting link of ad executable 'adgenhnm' on Wed Jan 8 19:19:33 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgenhnm \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adgenhomenum.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgenhnm] Error 1
Done with link of ad executable 'adgenhnm' on Wed Jan 8 19:19:33 PST 2014
Relink of module "adgenhnm" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adgetreg' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15539.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgetreg
Starting link of ad executable 'adgetreg' on Wed Jan 8 19:19:33 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgetreg \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adgetregvalue.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adgetreg] Error 1
Done with link of ad executable 'adgetreg' on Wed Jan 8 19:19:33 PST 2014
Relink of module "adgetreg" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adident' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15561.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adident
Starting link of ad executable 'adident' on Wed Jan 8 19:19:34 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adident
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adident.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adident] Error 1
Done with link of ad executable 'adident' on Wed Jan 8 19:19:34 PST 2014
Relink of module "adident" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adjava' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15583.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjava
Starting link of ad executable 'adjava' on Wed Jan 8 19:19:34 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjava
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adjava.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjava] Error 1
Done with link of ad executable 'adjava' on Wed Jan 8 19:19:35 PST 2014
Relink of module "adjava" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adjkey' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15605.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjkey
Starting link of ad executable 'adjkey' on Wed Jan 8 19:19:35 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjkey
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adjkey.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adjkey] Error 1
Done with link of ad executable 'adjkey' on Wed Jan 8 19:19:35 PST 2014
Relink of module "adjkey" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'admrgpch' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15627.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/admrgpch
Starting link of ad executable 'admrgpch' on Wed Jan 8 19:19:35 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/admrgpch
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/admpch.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/admrgpch] Error 1
Done with link of ad executable 'admrgpch' on Wed Jan 8 19:19:36 PST 2014
Relink of module "admrgpch" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adncnv' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15649.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adncnv
Starting link of ad executable 'adncnv' on Wed Jan 8 19:19:36 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adncnv
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adncnv.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adncnv] Error 1
Done with link of ad executable 'adncnv' on Wed Jan 8 19:19:36 PST 2014
Relink of module "adncnv" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adodfcmp' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15671.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adodfcmp
Starting link of ad executable 'adodfcmp' on Wed Jan 8 19:19:37 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adodfcmp
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/aicodf.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adodfcmp] Error 1
Done with link of ad executable 'adodfcmp' on Wed Jan 8 19:19:37 PST 2014
Relink of module "adodfcmp" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adpatch_wrapper' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15693.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpatch_wrapper
Starting link of ad executable 'adpatch_wrapper' on Wed Jan 8 19:19:37 PST
2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpatch_wrapper.new \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adpatch_main.o
-lsql10 -lclntsh `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpatch_wrapper]
Error 1
Done with link of ad executable 'adpatch_wrapper' on Wed Jan 8 19:19:38 PST
2014
Relink of module "adpatch_wrapper" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adpchnew' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15717.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpchnew
Starting link of ad executable 'adpchnew' on Wed Jan 8 19:19:38 PST 2014
gcc -s -L/home/oracle/ebs/apps/tech_st/10.1.2/lib/stubs
-L/home/oracle/ebs/apps/tech_st/10.1.2/lib -ldl -o
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpchnew
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/adpmain.o
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrbind.o
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrdump.o
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrutl.o
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrcfd.o
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrfs.o
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrval.o
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrad.o
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrdl.o
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/afldrul.o \
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10 -lclntsh
`cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/home/oracle/ebs/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i686-redhat-linux/4.4.6/libgcc_s.so: undefined reference to
`__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adpchnew] Error 1
Done with link of ad executable 'adpchnew' on Wed Jan 8 19:19:38 PST 2014
Relink of module "adpchnew" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'adprmkey' in product ad ...
make -f /home/oracle/ebs/apps/apps_st/appl/admin/VIS/out/link_ad_15740.mk
/home/oracle/ebs/apps/apps_st/appl/ad/12.0.0/bin/adprmkey
Starting link of ad executable 'adprmkey' on Wed Jan 8 19:19:3 -
Bluetooth: Refusing input device connect: No such file or directory
Hi,
After an update last week I can't pair my bluetooth mouse anymore. I have a Lenovo X1 laptop, with built-in bluetooth. All bluetooth devices I have tried until now have worked just fine.
The problem now, is that when I power my mouse on, and it tries to pair with the computer I get a notification message (gnome shell) asking to grant access. I never had this before. I answer "always grant access" and still doesn't work.
I searched the logs. When I start the machine I don't see any errors on /var/log/everything.log, and systemctl status bluetooth produces the following:
$ sudo systemctl status bluetooth
bluetooth.service - Bluetooth service
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled)
Active: active (running) since lun 2013-05-20 09:56:56 CST; 1min 26s ago
Main PID: 802 (bluetoothd)
CGroup: name=systemd:/system/bluetooth.service
└─802 /usr/sbin/bluetoothd -n
may 20 09:56:56 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Bluetooth Management interface initialized
may 20 09:56:56 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: input-headset driver probe failed for device E4:B0:21:D8:60:A0
may 20 09:56:56 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Unknown command complete for opcode 19
may 20 09:56:56 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Adapter /org/bluez/802/hci0 has been enabled
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/HFPAG
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/HFPAG
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/HFPHS
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/A2DPSource
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/HFPHS
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/A2DPSource
After I turn on the mouse, and it tries to pair, I have this on my /var/log/everything.log:
May 20 09:58:55 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Refusing input device connect: No such file or directory (2)
May 20 09:58:55 thinkpad-x1 bluetoothd[802]: Refusing input device connect: No such file or directory (2)
May 20 09:58:57 thinkpad-x1 dbus-daemon[668]: dbus[668]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
May 20 09:58:57 thinkpad-x1 dbus[668]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
May 20 09:58:57 thinkpad-x1 dbus[668]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.ModemManager1.service' for details.
May 20 09:58:57 thinkpad-x1 NetworkManager[658]: <warn> error poking ModemManager: GDBus.Error:org.freedesktop.systemd1.LoadFailed: Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.ModemManager1.service' for details.
May 20 09:58:58 thinkpad-x1 dbus-daemon[668]: dbus[668]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.ModemManager1.service' for details.
May 20 09:59:02 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Refusing input device connect: No such file or directory (2)
May 20 09:59:02 thinkpad-x1 bluetoothd[802]: Refusing input device connect: No such file or directory (2)
And systemctl status bluetooth produces the following:
$ sudo systemctl status bluetooth
bluetooth.service - Bluetooth service
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled)
Active: active (running) since lun 2013-05-20 09:56:56 CST; 2min 28s ago
Main PID: 802 (bluetoothd)
CGroup: name=systemd:/system/bluetooth.service
└─802 /usr/sbin/bluetoothd -n
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/HFPAG
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/HFPAG
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/HFPHS
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/A2DPSource
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/HFPHS
may 20 09:57:08 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Endpoint registered: sender=:1.36 path=/MediaEndpoint/A2DPSource
may 20 09:58:55 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Refusing input device connect: No such file or directory (2)
may 20 09:58:55 thinkpad-x1 bluetoothd[802]: Refusing input device connect: No such file or directory (2)
may 20 09:59:02 thinkpad-x1 bluetoothd[802]: bluetoothd[802]: Refusing input device connect: No such file or directory (2)
may 20 09:59:02 thinkpad-x1 bluetoothd[802]: Refusing input device connect: No such file or directory (2)
Does anyone have an idea where could be the problem?
Thank youHi bendavis78,
Welcome to Arch Linux. This thread is a bit over a year old. I am going to close this thread since Arch changes so fast. Please feel free to open a new thread for which you will be the original poster and provide a complete description of your problem. If you feel this thread is relevant, go ahead and link back to this thread.
Thanks. -
Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1 com.apple.launchd 1 *** launchd[1] has started up. ***
com.apple.launchd 1 com.apple.launchd 1 *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio RamosReinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard -
Getting `No such file or directory` error while trying to open bdb database
I have four multi-threaded processes (2 writer and 2 reader processes), which make use of Berkeley DB transactional data store. I have multiple environments and the associated database files and log files are located in separate directories (please refer to the DB_CONFIG below). When all these four processes start to perform open and close of databases in the environments very quickly, one of the reader process is throwing a No such file or directory error even though the file actually exists.
I am making use of Berkeley DB 4.7.25 for testing out these applications.
The four application names are as follows:
Writer 1
Writer 2
Reader 1
Reader 2
The application description is as follows:
‘*Writer 1*’ owns 8 environments and each environment having 123 Berkeley databases created using HASH access method. At any point of time, ‘*Writer 1*’ will be acting on 24 database files across 8 environments (3 database files per environment) for carrying out write operation. Where as reader process will be accessing all 123 database files / per environment (Total = 123 * 8 environments = 984 database files) for read activities. Similar configuration for Writer 2 as well – 8 separate environments and so on.
Writer 1, Reader 1 and Reader 2 processes share the environments created by Writer 1
Writer 2 and Reader 2 processes share the environments created by Writer 2
My DB_CONFIG file is configured as follows
set_cachesize 0 104857600 1 # 100 MB
set_lg_bsize 2097152 # 2 MB
set_data_dir ../../vol1/data/
set_lg_dir ../../vol31/logs/SUBID/
set_lk_max_locks 1500
set_lk_max_lockers 1500
set_lk_max_objects 1500
set_flags db_auto_commit
set_tx_max 200
mutex_set_increment 7500
Has anyone come across this problem before or is it something to do with the configuration?Hi Michael,
I should have included about how we are making use of DB_TRUNCATE flag in my previous reply itself. Sorry for that.
From writers, DB truncation happens periodically. During truncate (DB handle is not associated with any environment handle i.e. stand-alone DB
) following parameters are passed to db->open function call:
DB->open(DB *db,
DB_TXN *txnid, => NULL
const char *file, => file name (absolute DB file path)
const char *database, => NULL
DBTYPE type, => DB_HASH
u_int32_t flags, => DB_READ_UNCOMMITTED | DB_TRUNCATE | DB_CREATE | DB_THREAD
int mode); => 0
Also, DB_DUP flag is set.
As you have rightly pointed out, `No such file or directory` is occuring during truncation.
While a database is being truncated it will not be found by others trying to open it. We simulated this by stopping the writer process (responsible for truncation) and by opening & closing the databases repeatedly via readers. The reader process did not crash. When readers and writers were run simultaneously, we got `No such file or directory` error.Is there any solution to tackle this problem (because in our case writers and readers are run independently. So readers won't come to know about truncation from writers)?
Also, we are facing one more issue related to DB_TRUNCATE. Consider the following scenario:
<ul><li>Reader process holds reference of database (X) handle in environment 'Y' at time t1
</li>
<li>Writer process opens the database (X) in DB_TRUNCATE mode at time t2 (where t2 > t1)</li>
<li>After truncation, writer process closes the database and joins the environment 'Y'</li>
<li>After this any writes to database X is not visible to the reader process</li>
<li>Once reader process closes the database X and re-joins the environment, all the records inserted from writer process are visible</li>
</ul>
Is it the right behavior? If yes, how to make any writes visible to a reader process without closing and re-opening the database in the above-mentioned scenario?
Also, when [db_set_errfile|http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_set_errfile.html] was set, we did not get any additional information in the error file.
Thanks,
Magesh -
Getting Error in CMC - source file error. [No such file or directory]: [CrystalEnterprise.Smtp]
Dear All,
I am able to schedule the Crystal report successfully means mail gets auto triggered as we set in SCHEDULE option. But when we tried to use the notification option we get the status as FAILED. nd in details we get "source file error. [No such file or directory]: [CrystalEnterprise.Smtp]".
But still a mail gets triggred and each and every person will get mail. but the issue is notification will not work properly and no notification mail. And the status is despayed as FAILED with "source file error. [No such file or directory]: [CrystalEnterprise.Smtp]" this message.
Regards,
Rohan GhadiDo you have multiple job servers in your environment? Did all the Job servers configured SMTP settings?
-
"No such file or directory" errors on Time Machine backup volume
I remotely mounted the Time Machine backup volume onto another Mac and was looking around it in a Terminal window and discovered what appeared to be a funny problem. If I "cd" into some folders (but not all) and do a "ls -la" command, I get a lot of "No such file or directory" errors for all the subfolders, but all the files look fine. Yet if I go log onto the Mac that has the backup volume mounted as a local volume, these errors never appear for the exact same location. Even more weird is that if I do "ls -a" everything appears normal on both systems (no error messages anyway).
It appears to be the case that the folders that have the problem are folders that Time Machine has created as "hard links" to other folders which is something that Time Machine does and is only available as of Mac OS X 10.5 and is the secret behind how it avoids using up disk space for files that are the same in the different backups.
I moved the Time Machine disk to the second Mac and mounted the volume locally onto it (the second Mac that was showing the problems), so that now the volume is local to it instead of a remote mounted volume via AFP and the problem goes away, and if I do a remote mount on the first Mac of the Time Machine volume the problem appears on the first Mac system that was OK - so basically by switching the volume the problem switches also on who shows the "no such file or directory" errors.
Because of the way the problem occurs, ie only when the volume is remote mounted, it would appear to be an issue with AFP mounted volumes that contain these "hard links" to folders.
There is utility program written by Amit Singh, the fella who wrote the "Mac OS X Internals" book, called hfsdebug (you can get it from his website if you want - just do a web search for "Mac OS X Internals hfsdebug" if you want to find it ). If you use it to get a little bit more info on what's going on, it shows a lot of details about one of the problematic folders. Here is what things look like on the first Mac (mac1) with the Time Machine locally mounted:
mac1:xxx me$ pwd
/Volumes/MyBackups/yyy/xxx
mac1:xxx me$ ls -a
. .DS_Store D2
.. Documents D3
mac1:xxx me$ ls -lai
total 48
280678 drwxr-xr-x 5 me staff 204 Jan 20 01:23 .
282780 drwxr-xr-x 12 me staff 442 Jan 17 14:03 ..
286678 -rw-r--r--@ 1 me staff 21508 Jan 19 10:43 .DS_Store
135 drwxrwxrwx 91 me staff 3944 Jan 7 02:53 Documents
729750 drwx------ 104 me staff 7378 Jan 15 14:17 D2
728506 drwx------ 19 me staff 850 Jan 14 09:19 D3
mac1:xxx me$ hfsdebug Documents/ | head
<Catalog B-Tree node = 12589 (sector 0x18837)>
path = MyBackups:/yyy/xxx/Documents
# Catalog File Record
type = file (alias, directory hard link)
indirect folder = MyBackups:/.HFS+ Private Directory Data%000d/dir_135
file ID = 728505
flags = 0000000000100010
. File has a thread record in the catalog.
. File has hardlink chain.
reserved1 = 0 (first link ID)
mac1:xxx me$ cd Documents
mac1:xxx me$ ls -a | head
.DS_Store
.localized
.parallels-vm-directory
.promptCache
ACPI
ActivityMonitor2010-12-1710p32.txt
ActivityMonitor2010-12-179pxx.txt
mac1:Documents me$ ls -lai | head
total 17720
135 drwxrwxrwx 91 me staff 3944 Jan 7 02:53 .
280678 drwxr-xr-x 5 me staff 204 Jan 20 01:23 ..
144 -rw-------@ 1 me staff 39940 Jan 15 14:27 .DS_Store
145 -rw-r--r-- 1 me staff 0 Oct 20 2008 .localized
146 drwxr-xr-x 2 me staff 68 Feb 17 2009 .parallels-vm-directory
147 -rwxr-xr-x 1 me staff 8 Mar 20 2010 .promptCache
148 drwxr-xr-x 2 me staff 136 Aug 28 2009 ACPI
151 -rw-r--r-- 1 me staff 6893 Dec 17 10:36 A.txt
152 -rw-r--r--@ 1 me staff 7717 Dec 17 10:54 A9.txt
So you can see from the first few lines of the "ls -a" command, it shows some file/folders but you can't tell which yet. The next "ls -la" command shows which names are files and folders - that there are some folders (like ACPI) and some files (like A.txt and A9.txt) and all looks normal. And the "hfsdebug" info shows some details of what is really happening in the "Documents" folder, but more about that in a bit.
And here are what a "ls -a" and "ls -al" look like for the same locations on the second Mac (mac2) where the Time Machine volume is remote mounted:
mac2:xxx me$ pwd
/Volumes/MyBackups/yyy/xxx
mac2:xxx me$ ls -a
. .DS_Store D2
.. Documents D3
mac2:xxx me$ ls -lai
total 56
280678 drwxr-xr-x 6 me staff 264 Jan 20 01:23 .
282780 drwxr-xr-x 13 me staff 398 Jan 17 14:03 ..
286678 -rw-r--r--@ 1 me staff 21508 Jan 19 10:43 .DS_Store
728505 drwxrwxrwx 116 me staff 3900 Jan 7 02:53 Documents
729750 drwx------ 217 me staff 7334 Jan 15 14:17 D2
728506 drwx------ 25 me staff 806 Jan 14 09:19 D3
mac2:xxx me$ cd Documents
mac2:Documents me$ ls -a | head
.DS_Store
.localized
.parallels-vm-directory
.promptCache
ACPI
ActivityMonitor2010-12-1710p32.txt
ActivityMonitor2010-12-179pxx.txt
mac2:Documents me$ ls -lai | head
ls: .parallels-vm-directory: No such file or directory
ls: ACPI: No such file or directory
... many more "ls: ddd: No such file or directory" error messages appear - there is a one-to-one
correspondence between the "ddd" folders and the "no such file or directory" error messages
total 17912
728505 drwxrwxrwx 116 me staff 3900 Jan 7 02:53 .
280678 drwxr-xr-x 6 me staff 264 Jan 20 01:23 ..
144 -rw-------@ 1 me staff 39940 Jan 15 14:27 .DS_Store
145 -rw-r--r-- 1 me staff 0 Oct 20 2008 .localized
147 -rwxr-xr-x 1 me staff 8 Mar 20 2010 .promptCache
151 -rw-r--r-- 1 me staff 6893 Dec 17 10:36 A.txt
152 -rw-r--r--@ 1 me staff 7717 Dec 17 10:54 A9.txt
If you look very close a hint as to what is going on is obvious - the inode for the Documents folder is 152 on the local mounted case (the first set of code above for mac1), and it's 728505 in the remote mounted case for mac2. So it appears that these "hard links" to folders have an extra level of folder that is hidden from you and that AFP fails to take into account, and that is what the "hfsdebug" shows even better as you can clearly see the REAL location of the Documents folder is in something called "/.HFS+ Private Directory Data%000d/dir_135" that is not even visible to the shell. And if you look closely in the remote mac2 case, when I did the "cd Documents" I don't go into the inode 135, but into the inode 728505 (look close at the "." entry for the "ls -la" commands on both mac1 and mac2) which is the REAL problem, but have no idea how to get AFP to follow the extra level of indirection.
Anyone have any ideas how to fix this so that "ls -l" commands don't generate these "no such file or folder" messages?
I am guessing that the issue is really something to do with AFP (Apple File Protocol) mounted remote volumes. The TimeMachine example is something that I used as an example that anyone could verify the problem. The real problem for me has nothing to do with Time Machine, but has to do with some hard links to folders that I created on another file system totally separate from the Time Machine volume. They exhibit the same problem as these Time Machine created folders, so am pretty sure the problem has nothing to do with how I created hard links to folders which is not doable normally without writing a super simple little 10 line program using the link() system call - do a "man 2 link" if you are curious how it works.
I'm well aware of the issues and the conditions when they can and can't be used and the potential hazards. I have an issue in which they are the best way to solve a problem. And after the problem was solved, is when I noticed this issue that appears to be a by-product of using them.
Do not try these hard links to folders on your own without knowing what they're for and how to use them and not use them. They can cause real problems if not used correctly. So if you decide to try them out and you loose some files or your entire drive, don't say I didn't warn you first.
Thanks ...
-BobThe problem is Mac to Mac - the volume that I'm having the issue with is not related in any way to Time Machine or to TimeCapsule. The reference to TIme Machine is just to illustrate the problem exists outside of my own personal work with hard links to folders on HFS Extended volumes (case-sensitive in this particular case in case that matters).
I'm not too excited about the idea of snooping AFP protocol to discover anything that might be learned there.
The most significant clue that I've seen so far has to do with the inode numbers for the two folders shown in the Terminal window snippets in the original post. The local mounted case uses the inode=728505 of the problematic folder which is in turn linked to the hidden original inode of 135 via the super-secret /.HFS+... folder that you can't see unless using something like the "hfsdebug" program I mentioned.
The remote mounted case uses the inode=728505 but does not make the additional jump to the inode=135 which is where lower level folders appear to be physically stored.
Hence the behavior that is seen - the local mounted case is happy and shows what would be expected and the remote mounted case shows only files contained in the problem folder but not lower-level folders or their contents.
From my little knowledge of how these inode entries really work, I think that they are some sort of linked list chain of values, so that you have to follow the entire chain to get at what you're looking for. If the chain is broken somewhere along the line or not followed correctly, things like this can happen. I think this is a case of things not being followed correctly, as if it were a broken chain problem then the local mounted case would have problems also.
But the information for this link in the chain is there (from 728505 to the magic-135) but for some reason AFP doesn't make this extra jump.
Yesterday I heard back from Apple tech support and they have confirmed this problem and say that it is a "implementation limitation" with the AFP client. I think it's a bug, but that will have to be up to Apple to decide now that it's been reported. I just finished reporting this as a bug via the Apple Bug Reporter web site -- it's bug id 8926401 if you want to keep track it.
Thanks for the insights...
-Bob -
Dear Experts,
Please note that I am facing a chllenge while confiuguring the VNCServer on the local test Server. The Local Test Sver OS Version is Redhat Enterprise Linux Server
Release 5.5 32-bit. Please review the following error message and advise me on how to fix the vncserver issue.
[root@test .vnc]# cat xstartup
#!/bin/sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc
gnome-session &
[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &
[root@test .vnc]# cat /etc/sysconfig/vncservers
# The VNCSERVERS variable is a list of display:user pairs.
# Uncomment the lines below to start a VNC server on display :2
# as my 'myusername' (adjust this to your own). You will also
# need to set a VNC password; run 'man vncpasswd' to see how
# to do that.
# DO NOT RUN THIS SERVICE if your local area network is
# untrusted! For a secure way of using VNC, see
# <URL:http://www.uk.research.att.com/archive/vnc/sshvnc.html>.
# Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.
# Use "-nohttpd" to prevent web-based VNC clients connecting.
# Use "-localhost" to prevent remote VNC clients connecting except when
# doing so through a secure tunnel. See the "-via" option in the
# `man vncviewer' manual page.
# VNCSERVERS="2:myusername"
# VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -nohttpd -localhost"
VNCSERVERS="1:oracle"
[root@test .vnc]# ls
passwd test.oracle.co.zm:1.pid test.oracle.co.zm:3.log test.oracle.co.zm:5.pid test.oracle.co.zm:6.pid
test.oracle.co.zm:1.log test.oracle.co.zm:2.log test.oracle.co.zm:5.log test.oracle.co.zm:6.log xstartup
[root@test .vnc]# more test.oracle.co.zm:1.log
Xvnc Free Edition 4.1.2
Copyright (C) 2002-2005 RealVNC Ltd.
See http://www.realvnc.com for information on VNC.
Underlying X server release 70101000, The X.Org Foundation
Tue Mar 11 11:18:37 2014
vncext: VNC extension running!
vncext: Listening for VNC connections on port 5901
vncext: Listening for HTTP connections on port 5801
vncext: created VNC server for screen 0
Could not init font path element unix/:7100, removing from list!
localuser:root being added to access control list
No profile for user 'root' found
SESSION_MANAGER=local/test.oracle.co.zm:/tmp/.ICE-unix/13603
Window manager warning: Log level 32: could not find XKB extension.
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (eggcups:13671): WARNING **: IPP request failed with status 1030
** (nm-applet:13697): WARNING **: No connections defined
Initializing nautilus-open-terminal extension
Unable to open desktop file /usr/share/applications/redhat-email.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-writer.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-impress.desktop for panel launcher: No such file or directory
Unable to open desktop file /usr/share/applications/openoffice.org-1.9-calc.desktop for panel launcher: No such file or directory
[root@test .vnc]#
Regards
Mohammed Abdul MuqeetHi,
Try these 3 solutions
1. Did you start vncserver services as:
service vncserver start
2.Check that port 5901 has not been blocked by a firewall:
# nc -vz localhost 5901
You should get a connection and a termination. If you get an error, fix the firewall.
3. service iptables stop
Hope This Helps
Regards,
-DK
Maybe you are looking for
-
Itunes will not open --windows 7 64bit
ok so, itunes refuses to open. i went to the support page and did EVERYTHING it says to do. update drivers, disable virus protection, add a new user, try safe mode, etc etc. STILL WILL NOT OPEN. uninstalled everything, reinstalled everything about 5
-
Import/Export webdynpro ABAP application
Hi all, I was wondering whether there is any way to export/import the local object/web dynpro application that we have created(like the import/export in web dynpro java). I would like to keep a copy of the application developed in my local machine us
-
After the recent software update my calendar entries synch and present two entries on the Droid while there is only one on the Google Calendar.
-
Newbie ? - Error Opening Database After Recovery
Hi All- I'm new to Oracle and am using 9i - I'm working on cloning our Production db for a Test db. I shutdown the Production db and copied all the files from that db into my Test db - I then started my Test db and recovered it. I am now trying to OP
-
Hi i got a number and it goes like that. Its been tough for me to understand recursive. Any1 can do it for me and explain it to me. Thanks (i) In mathematics the Lucas Numbers are 1, 3, 4, 7, 11, 18, 29, 47, 76, 123, ... They can be generated by the