FTP_BPM_RFC back FTP

Hello.
i have made this scenario of FTP to BPM to RFC back by FTP and its working fine.
now i have also modified this by adding a ALERT scenario to it.So now i make 3 more receiver determination and seperate receiever agreements...
Now wot i want to ask is when i make the file mode "delete" and transfer it, in return i get back only one file..
is it not that i shud be getting two files for both the cases..or is it not possible to send one file as a sender and have 2 receivers simultaneously...
Regards..
vishal

Hello Keith,
The file to RFC scenario can be implemented in the following steps,
1. In the design, create the requsite DataType, MessageType and MessageInterfaces. One message interface will be outbound asynch and the other will be inbound async.
2. Do the message mapping and also the interface mapping as required.
In the configuration, the following has to be done,
1. Create 2 communication channels. One for file as sender and the other for RFC  as the receiver.
2. Create 1 sender agreement and 1 receiver agreement. In the sender agreement give your FILE communication channel and in the receiver agreement give your RFC communication channel.
3. Then, do the receiver determination, interface determination.
4. In each of this, the sender service is the business system  you have created and the receiver service is the system in which your RFC resides.
Regards,
Bhavesh

Similar Messages

  • HP Pavilion dv6707us Web Cam

    My webcam in my Pavilion dv6707us doesn't show up in Device Manager and won't work. Tried updating Quick Play and it keeps saying it may have installed with an error.

    Hi,
    Please try this and post the result back
      ftp://ftp.hp.com/pub/softpaq/sp34501-35000/sp34746.exe
    Regards,
    BH
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Backing up and restoring FTP settings on a Mac?

    Using DW CS3 and CS4 how can I backup FTP settings in these programs and transfer them to CS5 on a Mac running Snow Leopard?
    Thanks.

    StanWelks wrote:
    Just to clarify:
    1. Do I import the file into CS5 through Site Manager?
    2. Are there any other files/settings I need to backup?
    3. Where can I backup the extensions  installed?
    Thanks!
    Yes
    Well, you would need to backup the site's files themselves.  The site definition file only contains information ABOUT the site.
    They are in the Configurations folder under the user :: Library :: Application Support :: Adobe :: Dreamweaver CS5 :: en_US folder.  Just back up that folder.
    Good luck!

  • My Firefox menu button has disappeared. Why? How can I get it back? Without it I don't know how to get to my FTP.

    My Firefox menu button has disappeared. Why? How can I get it back? Without it I don't know how to get to my FTP. I never did anything to make this happen.

    Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.

  • How do I FTP files from a security camera to iCloud so they can be retrieved back to my MacBook Pro whenever I connect when travelling?

    How do I FTP files from a security camera to iCloud so they can be retrieved back to my MacBook Pro whenever I connect when travelling?
    Russ

    Do you want to watch the live feed of your secutiry cameras or recorded footage?
    In either case, I don't think iCloud is your solution.
    For the first one, check with your security camera software, they usually have this option of broadcasting, so you'll know how to access it.
    For the later, you should use something like Dropbox (www.dropbox.com), since iCloud file sharing is, up to this date, app restricted.
    Hope it helps.
    JP

  • Is it possible to import the website I completed in Muse from the ftp server back into Muse?

    I have lost the Muse files for my site (due to a stolen laptop). Is it possible to download the site files from my ftp server and import the files back into Muse (without having to rebuild the entire site)? My site is hosted by GoDaddy cPanel, and I am running Windows 7 on my (new) laptop. Bumming out here and could use some help. Thanks!

    Yes, go to your GoDaddy control panel and somewhere there will be a download your HTML button.

  • FTP Website Offline, Not Sure How to Bring It Back Up

    Since you are open to alternative solutions, try SynaMan. It is a replacement for FTP. You can install it on your existing file server (Windows, Linux or Mac) and let your clients upload/download files.
    All you will have to do is configure your network firewall so your clients can connect from the Internet. Call our support department if you need help in setting it up.
    SynaMan uses HTTP for file transferring instead of FTP. Therefore, on the client's end all you need is a browser.

    Hey All, so the previous admin here where I work setup our company website and FTP website etc. Today, this computer with Filezilla crash and burned, being new to web hosting and FTP in general, I am tasked with bringing this website back up. Essentially, users where able to click a link on our website that brought them to an FTP directory with certain files that we make available to view for them. I am completely at a loss on how to bring this back up, and essentially tried everything to my wits end. We are using GoDaddy as a hosting service, I load up Filezilla Client, connect with my hosting adress and User Name, Filezilla (client) than shows a directory of files that are on my main website, but not the directory that held FTP files, I used to upload the files to that site "ftp.mysite.com" through a shared drive on my computer,...
    This topic first appeared in the Spiceworks Community

  • SAP - FTP - response back to SAP

    Is it possible to have a program from SAP trigger a scenario that will go through XI to an FTP site, pull in a CSV file.  The file will need to get pulled back into XI get converted to XML with file content conversion and then loaded into an SAP Ztable.
    Thanks
    Yudi

    Hi,
    This kind of scenario is possible with the help of BPM...as here two things are involved that the Program will trigger to send signal to start fetching data from csv file and send back to R/3.
    Thus You could either use any IDOC to send it as starting signal which will start the event in BPM..then you can read the data from FTP server by using Receive step and pass it to either proxy, Asynchronous RFC or as an IDOC to process further on R/3 side.
    Here IDOC will be sending as triggering point and will be async..so no errors or response would be expected..
    Thus indirectly it will involve two scenarios as one to trigger the process and 2nd one to read data from csv file and to pass to R/3 by IDOC, PROXY, RFC etc.
    Thanks
    Swarup

  • I had to download the latest version, how to I get fire ftp back?

    I was required to download the latest version of firefox, I use Fire FTP to manage my company's website, I was able to find this under tools, it's now gone. I've found where I can download it, the computer tells me it's not compatible with the current version of Firefox, if I try it again, the computer tells me it will be available after I re-start. I've done this several times, each time I get a different result, but no Fire FTP showing up under my tools button, Please help!!!

    Installing the [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=api Add-on Compatibility Reporter] may help. Please read the ''''About this Add-on'''' part on the page.

  • Are "Back to My Mac" FTP and SSH services visible to "everyone"?

    With the MobileMe "Back to my Mac" service, I can establish SSH terminal and SFTP connections from my Mac Mini at home to my Mac Pro at my work.  The SSH (Remote Login) and SFTP (File Sharing) services are enabled under System Preferences -->  Sharing.
    Does this make the SFTP and SSH services on my Mac visible/accessible to anyone else?  I like using "Back to my Mac" because it is simple and it uses key exchange for authentication when connecting.  However, I'm concerned that by enabling the SFTP and SSH services under Sharing, I'm also opening these services up to anyone who can see them.  Is this true, and if so, how can I maintain the security of my computers?
    Thanks in advance,
    jjw

    OK, besides putting me to sleep, the BTMM description seems to indicate that it is your MobileMe password that is important when making BTMM connections through a home NAT router.
    BTMM does open a port through the router, but if I understand correctly, it does not listen for ssh, or vnc, or afp protocols, but rather for the BTMM IPsec secure tunnel to be established, and then all the BTMM supported servers travel over the IPsec secure tunnel.  NOTE: the paper was putting me to sleep, so I could have this wrong.
    Kerberos is used for authentication of the IPsec tunnel.
    What I'm thinking is that if your Mac stays behind a home NAT router, or corporate firewall (that allows BTMM to work), then the important password is your MobileMe password.   If the Mac goes out in public, then all your Mac OS X user account (and guest) passwords need to be strong (where longer is better).
    A GRC Shields-UP probe will not check all possible ports.  If BTMM is running and all the standard ports are marked as stealth, then BTMM is using a non-standard port (as in one GRC does not check by default).  That makes it more difficult for someone to find your NAT router and then your Mac.  While this is NOT security, it does add some difficulty to the intruder's attempts at finding you.
    AGAIN, I did not fully understand the BTMM paper, so "Your Mileage May Vary" with respect to my analysis acccuracy.

  • FTP COMMANDS IN BACK GROUND

    Hi every one,
    I am using ftp_connect, ftp_command function modules.
    i want to schedule my program in backround,but this s not working....
    RFC DEST used is SAPFTP and also tried SAPFTPA..
    no use..
    THANKS IN ADVANCE
    RAVI

    Along with rfcdestination one has to provide the key also.
    Just check below code, may be useful...
      DATA: l_slen     TYPE i,
            l_error,
            l_pwd(30)  TYPE c.
      CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
                 c_key  TYPE i              VALUE 26101957.
      l_error = 0.
    connect to ftp server
      l_pwd = p_pwd.
      l_slen = STRLEN( l_pwd ).
      CALL FUNCTION 'HTTP_SCRAMBLE'
        EXPORTING
          SOURCE      = l_pwd
          sourcelen   = l_slen
          key         = c_key
        IMPORTING
          destination = l_pwd.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING
          text = 'Connect to FTP Server'.
    To Connect to the Server using FTP
      CALL FUNCTION 'FTP_CONNECT'
        EXPORTING
          user            = p_user
          password        = l_pwd
          host            = p_host
          rfc_destination = c_dest
        IMPORTING
          handle          = w_hdl
        EXCEPTIONS
          OTHERS          = 1.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CLEAR : w_outfile, w_file_count.
      MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_COACODE' TO w_outfile.
      PERFORM download_to_ftp TABLES it_coacode USING w_outfile.
    To disconnect the FTP
      CALL FUNCTION 'FTP_DISCONNECT'
        EXPORTING
          handle = w_hdl.
    To disconnect the RFC Connection
      CALL FUNCTION 'RFC_CONNECTION_CLOSE'
        EXPORTING
          destination = c_dest
        EXCEPTIONS
          OTHERS      = 1.
    FORM download_to_ftp TABLES it_tab
                         USING l_string TYPE char64.
      CALL FUNCTION 'FTP_R3_TO_SERVER'
        EXPORTING
          handle         = w_hdl
          fname          = l_string
          character_mode = 'X'
        TABLES
          text           = it_tab[]
        EXCEPTIONS
          tcpip_error    = 1
          command_error  = 2
          data_error     = 3
          OTHERS         = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
                RAISING invalid_output_file.
      ENDIF.
    ENDFORM.                    " download_to_ftp

  • I recently upgraded to osx 10.9.2 and now my ftp has been turned off how do i turn it back on

    So frustrated have been trying to chat with apple support and i was supposed to be connected in 2 min.  That was 1 hour ago so I called and they can't transfer me to technical support unless I pay the 59 dollars for support.  All i did was upgrade and now my ftp has been turned off so my network scanner won't conect to the ip address on my imac.  Any help would be appreciated.  Thanks,

    Select your hard drive in the Finder and choose File -> Get Info. What is the available space?

  • I published my website to an FTP server and it comes up correctly at the index page, but if I navigate to a different page then back to "index" it sends me to my FTP server's home page.

    I contacted the techs at my server and they said the "i" in index was not capitalized in the hyperlink but was capitalized in the file.  iWeb makes it's own hyperlink - how do I fix it?
    Many thanks to anyone that can help.  The website is www.beeskneesbodyworks.com  if you want to see for yourself.
    Trish

    You have named your Home page "Index" which you cannot do.
    Change it Home or something else, republish your site and all will be well.

  • How can i do scheduled automatic backups to an ftp server in ios xr?

    Hello guys! As the title says im looking forward to automatically back up my running config on a cisco CRS-1 to an FTP server. I was only able to find this config example:
    Configuration commit auto-save filename ftp://A.B.C.D/myconfig.txt
    This allows me to save my config to an ftp server everytime i use commit on the device. Now i want to know if there's a way to automatically save my configs everyday at 00:00  and also include the date and time in the name of the file so i don't overwrite the existing files in the ftp server.
    I dont want to use any tool i just wanna know if what im asking is possible via CLI commands. I would greatly appreciate your help with this subject.
    Regards,
    David

    Not sure if this script will work on a CRS, but try this:
    archive
    log config
    logging enable
    hidekeys
    path tftp:///$h-
    write-memory
    time-period 10080
    Explaination: 
    There are two ways to save your config to your remote station:
    1.  When someone saves the config; and
    2.  At an alloted time period, expressed in 10080 (weekly for me). 

  • Getting filename in FTP Adapter in ESB

    I am trying to get the filename on an inbound FTP adapter in an ESB. I've followed the directions I have found, by following these steps:
    1. The namespace xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions" is automatically generated in the xsl file.
    2. Create a variable in the xsl file, with value ehdr:getRequestHeader('/fhdr:InboundFileHeaderType/fhdr:fileName','fhdr=http://xmlns.oracle.com/pcbpel/adapter/file/;'). Let's give it the name INFILENAME.
    3. Reference the variable in some expression in the xsl file: $INFILENAME
    4.Set UseHeaders="true" in the FTP inbound wsdl file
    When I do this in a file adapter, I can use the value. When I do this in an ftp adapter, no value comes back.
    Any ideas?

    Yes, that did it, thanks. I had a typo:
    getRequestHeader('/fhdr:InboundFtpHeaderType/fhdr:fileName,'fhdr=http://xmlns.oracle.com/pcbpel/adapter/ftp/;')
    which should have had "FTP" in upper case. The correct code is as you stated:
    getRequestHeader('/fhdr:InboundFTPHeaderType/fhdr:fileName,'fhdr=http://xmlns.oracle.com/pcbpel/adapter/ftp/;')

Maybe you are looking for